svn commit: r335925 - head/sys/dev/usb/net
Oleksandr Tymoshenko
gonzo at FreeBSD.org
Wed Jul 4 03:02:55 UTC 2018
Author: gonzo
Date: Wed Jul 4 03:02:53 2018
New Revision: 335925
URL: https://svnweb.freebsd.org/changeset/base/335925
Log:
muge(4): add DTB blob as one more possible source of MAC address
On FDT-enabled platforms check if DTB blob has MAC address configured by
a boot loader. This information passed as a "local-mac-address" or
"mac-address" property of the device node. For USB NICs node
can be found by looking for compatibility string "usbVVV,PPP" where
VVV - vendor id (hex) and PPP - product id (hex)
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D16117
Modified:
head/sys/dev/usb/net/if_muge.c
Modified: head/sys/dev/usb/net/if_muge.c
==============================================================================
--- head/sys/dev/usb/net/if_muge.c Wed Jul 4 02:47:16 2018 (r335924)
+++ head/sys/dev/usb/net/if_muge.c Wed Jul 4 03:02:53 2018 (r335925)
@@ -95,6 +95,12 @@ __FBSDID("$FreeBSD$");
#include "opt_platform.h"
+#ifdef FDT
+#include <dev/fdt/fdt_common.h>
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+#endif
+
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
@@ -1427,30 +1433,117 @@ tr_setup:
}
}
+#ifdef FDT
/**
- * muge_attach_post - Called after the driver attached to the USB interface
- * @ue: the USB ethernet device
+ * muge_fdt_find_eth_node - find descendant node with required compatibility
+ * @start: start node
+ * @compatible: compatible string used to identify the node
*
- * This is where the chip is intialised for the first time. This is
- * different from the muge_init() function in that that one is designed to
- * setup the H/W to match the UE settings and can be called after a reset.
+ * Loop through all descendant nodes and return first match with required
+ * compatibility.
*
+ * RETURNS:
+ * Returns node's phandle on success -1 otherwise
*/
+static phandle_t
+muge_fdt_find_eth_node(phandle_t start, const char *compatible)
+{
+ phandle_t child, node;
+
+ /* Traverse through entire tree to find usb ethernet nodes. */
+ for (node = OF_child(start); node != 0; node = OF_peer(node)) {
+ if (ofw_bus_node_is_compatible(node, compatible))
+ return (node);
+ child = muge_fdt_find_eth_node(node, compatible);
+ if (child != -1)
+ return (child);
+ }
+
+ return (-1);
+}
+
+/**
+ * muge_fdt_read_mac_property - read MAC address from node
+ * @node: USB device node
+ * @mac: memory to store MAC address to
+ *
+ * Check for common properties that might contain MAC address
+ * passed by boot loader.
+ *
+ * RETURNS:
+ * Returns 0 on success, error code otherwise
+ */
+static int
+muge_fdt_read_mac_property(phandle_t node, unsigned char *mac)
+{
+ int len;
+
+ /* Check if there is property */
+ if ((len = OF_getproplen(node, "local-mac-address")) > 0) {
+ if (len != ETHER_ADDR_LEN)
+ return (EINVAL);
+
+ OF_getprop(node, "local-mac-address", mac,
+ ETHER_ADDR_LEN);
+ return (0);
+ }
+
+ if ((len = OF_getproplen(node, "mac-address")) > 0) {
+ if (len != ETHER_ADDR_LEN)
+ return (EINVAL);
+
+ OF_getprop(node, "mac-address", mac,
+ ETHER_ADDR_LEN);
+ return (0);
+ }
+
+ return (ENXIO);
+}
+
+/**
+ * muge_fdt_find_mac - read MAC address from node
+ * @compatible: compatible string for DTB node in the form "usb[N]NNN,[M]MMM"
+ * where NNN is vendor id and MMM is product id
+ * @mac: memory to store MAC address to
+ *
+ * Tries to find matching node in DTS and obtain MAC address info from it
+ *
+ * RETURNS:
+ * Returns 0 on success, error code otherwise
+ */
+static int
+muge_fdt_find_mac(const char *compatible, unsigned char *mac)
+{
+ phandle_t node, root;
+
+ root = OF_finddevice("/");
+ node = muge_fdt_find_eth_node(root, compatible);
+ if (node != -1) {
+ if (muge_fdt_read_mac_property(node, mac) == 0)
+ return (0);
+ }
+
+ return (ENXIO);
+}
+#endif
+
+/**
+ * muge_set_mac_addr - Initiailizes NIC MAC address
+ * @ue: the USB ethernet device
+ *
+ * Tries to obtain MAC address from number of sources: registers,
+ * EEPROM, DTB blob. If all sources fail - generates random MAC.
+ */
static void
-muge_attach_post(struct usb_ether *ue)
+muge_set_mac_addr(struct usb_ether *ue)
{
struct muge_softc *sc = uether_getsc(ue);
uint32_t mac_h, mac_l;
- muge_dbg_printf(sc, "Calling muge_attach_post.\n");
+#ifdef FDT
+ char compatible[16];
+ struct usb_attach_arg *uaa = device_get_ivars(ue->ue_dev);
+#endif
- /* Setup some of the basics */
- sc->sc_phyno = 1;
-
- /*
- * Attempt to get the mac address, if an EEPROM is not attached this
- * will just return FF:FF:FF:FF:FF:FF, so in such cases we invent a MAC
- * address based on urandom.
- */
memset(sc->sc_ue.ue_eaddr, 0xff, ETHER_ADDR_LEN);
uint32_t val;
@@ -1468,29 +1561,57 @@ muge_attach_post(struct usb_ether *ue)
}
/* If RX_ADDRx did not provide a valid MAC address, try EEPROM. */
- if (!ETHER_IS_VALID(sc->sc_ue.ue_eaddr)) {
- if ((lan78xx_eeprom_present(sc) &&
- lan78xx_eeprom_read_raw(sc, ETH_E2P_MAC_OFFSET,
- sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN) == 0) ||
- (lan78xx_otp_read(sc, OTP_MAC_OFFSET,
- sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN) == 0)) {
- if (ETHER_IS_VALID(sc->sc_ue.ue_eaddr)) {
- muge_dbg_printf(sc, "MAC read from EEPROM\n");
- } else {
- muge_dbg_printf(sc, "MAC assigned randomly\n");
- read_random(sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN);
- sc->sc_ue.ue_eaddr[0] &= ~0x01; /* unicast */
- sc->sc_ue.ue_eaddr[0] |= 0x02;/* locally administered */
- }
- } else {
- muge_dbg_printf(sc, "MAC assigned randomly\n");
- arc4rand(sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN, 0);
- sc->sc_ue.ue_eaddr[0] &= ~0x01; /* unicast */
- sc->sc_ue.ue_eaddr[0] |= 0x02; /* locally administered */
- }
- } else {
+ if (ETHER_IS_VALID(sc->sc_ue.ue_eaddr)) {
muge_dbg_printf(sc, "MAC assigned from registers\n");
+ return;
}
+
+ if ((lan78xx_eeprom_present(sc) &&
+ lan78xx_eeprom_read_raw(sc, ETH_E2P_MAC_OFFSET,
+ sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN) == 0) ||
+ (lan78xx_otp_read(sc, OTP_MAC_OFFSET,
+ sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN) == 0)) {
+ if (ETHER_IS_VALID(sc->sc_ue.ue_eaddr)) {
+ muge_dbg_printf(sc, "MAC read from EEPROM\n");
+ return;
+ }
+ }
+
+#ifdef FDT
+ snprintf(compatible, sizeof(compatible), "usb%x,%x",
+ uaa->info.idVendor, uaa->info.idProduct);
+ if (muge_fdt_find_mac(compatible, sc->sc_ue.ue_eaddr) == 0) {
+ muge_dbg_printf(sc, "MAC assigned from FDT blob\n");
+ return;
+ }
+#endif
+
+ muge_dbg_printf(sc, "MAC assigned randomly\n");
+ arc4rand(sc->sc_ue.ue_eaddr, ETHER_ADDR_LEN, 0);
+ sc->sc_ue.ue_eaddr[0] &= ~0x01; /* unicast */
+ sc->sc_ue.ue_eaddr[0] |= 0x02; /* locally administered */
+}
+
+/**
+ * muge_attach_post - Called after the driver attached to the USB interface
+ * @ue: the USB ethernet device
+ *
+ * This is where the chip is intialised for the first time. This is
+ * different from the muge_init() function in that that one is designed to
+ * setup the H/W to match the UE settings and can be called after a reset.
+ *
+ */
+static void
+muge_attach_post(struct usb_ether *ue)
+{
+ struct muge_softc *sc = uether_getsc(ue);
+
+ muge_dbg_printf(sc, "Calling muge_attach_post.\n");
+
+ /* Setup some of the basics */
+ sc->sc_phyno = 1;
+
+ muge_set_mac_addr(ue);
/* Initialise the chip for the first time */
lan78xx_chip_init(sc);
More information about the svn-src-head
mailing list