svn commit: r312290 - in head/sys: conf dev/gpio
Michael Zhilin
mizhka at FreeBSD.org
Mon Jan 16 15:36:38 UTC 2017
Author: mizhka
Date: Mon Jan 16 15:36:36 2017
New Revision: 312290
URL: https://svnweb.freebsd.org/changeset/base/312290
Log:
[gpioths] new driver for temperature/humidity sensor DHT11
This patch adds driver for temperature/humidity sensor connected via GPIO.
To compile it into kernel add "device gpioths". To activate driver, use
hints (.at and .pins) for gpiobus. As result it will provide temperature &
humidity values via sysctl.
DHT11 is cheap & popular temperature/humidity sensor used via GPIO on ARM
or MIPS devices like Raspberry Pi or Onion Omega.
Reviewed by: adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D9185
Added:
head/sys/dev/gpio/gpioths.c (contents, props changed)
Modified:
head/sys/conf/files
Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files Mon Jan 16 15:23:55 2017 (r312289)
+++ head/sys/conf/files Mon Jan 16 15:36:36 2017 (r312290)
@@ -1714,6 +1714,7 @@ dev/gpio/gpioled_fdt.c optional gpioled
dev/gpio/gpiopower.c optional gpiopower fdt
dev/gpio/gpioregulator.c optional gpioregulator fdt ext_resources
dev/gpio/gpiospi.c optional gpiospi
+dev/gpio/gpioths.c optional gpioths
dev/gpio/gpio_if.m optional gpio
dev/gpio/gpiobus_if.m optional gpio
dev/gpio/gpiopps.c optional gpiopps
Added: head/sys/dev/gpio/gpioths.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/gpio/gpioths.c Mon Jan 16 15:36:36 2017 (r312290)
@@ -0,0 +1,405 @@
+/*-
+ * Copyright (c) 2016 Michael Zhilin <mizhka at freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/module.h>
+#include <sys/errno.h>
+#include <sys/systm.h>
+#include <sys/sysctl.h>
+
+#include <machine/bus.h>
+#include <sys/rman.h>
+#include <sys/gpio.h>
+#include <machine/resource.h>
+
+#include "gpiobus_if.h"
+
+/*
+ * GPIOTHS - Temp/Humidity sensor over GPIO, e.g. DHT11/DHT22
+ * This is driver for Temperature & Humidity sensor which provides digital
+ * output over single-wire protocol from embedded 8-bit microcontroller.
+ *
+ * Temp/Humidity sensor can't be discovered automatically, please specify hints
+ * as part of loader or kernel configuration:
+ * hint.gpioths.0.at="gpiobus0"
+ * hint.gpioths.0.pins=<PIN>
+ */
+
+#define GPIOTHS_POLLTIME 5 /* in seconds */
+
+#define GPIOTHS_DHT_STARTCYCLE 20000 /* 20ms = 20000us */
+#define GPIOTHS_DHT_TIMEOUT 1000 /* 1ms = 1000us */
+#define GPIOTHS_DHT_CYCLES 41
+#define GPIOTHS_DHT_ONEBYTEMASK 0xFF
+#define GPIOTHS_DHT_TEMP_SHIFT 8
+#define GPIOTHS_DHT_HUM_SHIFT 24
+
+struct gpioths_softc {
+ device_t dev;
+ int temp;
+ int hum;
+ int fails;
+ struct sysctl_oid *temp_oid;
+ struct sysctl_oid *hum_oid;
+ struct sysctl_oid *fails_oid;
+ struct callout callout;
+};
+
+static devclass_t gpioths_devclass;
+
+/* Prototypes */
+static int gpioths_probe(device_t dev);
+static int gpioths_attach(device_t dev);
+static int gpioths_detach(device_t dev);
+static void gpioths_poll(void *arg);
+static int gpioths_temp_sysctl(SYSCTL_HANDLER_ARGS);
+static int gpioths_hum_sysctl(SYSCTL_HANDLER_ARGS);
+static int gpioths_fails_sysctl(SYSCTL_HANDLER_ARGS);
+
+/* DHT-specific methods */
+static int gpioths_dht_initread(device_t bus, device_t dev);
+static int gpioths_dht_readbytes(device_t bus, device_t dev);
+static int gpioths_dht_timeuntil(device_t bus, device_t dev,
+ uint32_t lev, uint32_t *time);
+
+/* Implementation */
+static int
+gpioths_probe(device_t dev)
+{
+ device_set_desc(dev, "Temperature and Humidity Sensor over GPIO");
+ return (0);
+}
+
+static int
+gpioths_dht_timeuntil(device_t bus, device_t dev, uint32_t lev, uint32_t *time)
+{
+ uint32_t cur_level;
+ int i;
+
+ for (i = 0; i < GPIOTHS_DHT_TIMEOUT; i++) {
+ GPIOBUS_PIN_GET(bus, dev, 0, &cur_level);
+ if (cur_level == lev) {
+ if (time != NULL)
+ *time = i;
+ return (0);
+ }
+ DELAY(1);
+ }
+
+ /* Timeout */
+ return (ETIMEDOUT);
+}
+
+static int
+gpioths_dht_initread(device_t bus, device_t dev)
+{
+ int err;
+
+ err = GPIOBUS_PIN_SETFLAGS(bus, dev, 0, GPIO_PIN_OUTPUT);
+ if (err != 0) {
+ device_printf(dev, "err(GPIOBUS_PIN_SETFLAGS, OUT) = %d\n", err);
+ return (err);
+ }
+ DELAY(1);
+
+ err = GPIOBUS_PIN_SET(bus, dev, 0, GPIO_PIN_LOW);
+ if (err != 0) {
+ device_printf(dev, "err(GPIOBUS_PIN_SET, LOW) = %d\n", err);
+ return (err);
+ }
+
+ /*
+ * According to specifications we need to wait no more than 18ms
+ * to start data transfer
+ */
+ DELAY(GPIOTHS_DHT_STARTCYCLE);
+ err = GPIOBUS_PIN_SET(bus, dev, 0, GPIO_PIN_HIGH);
+ if (err != 0) {
+ device_printf(dev, "err(GPIOBUS_PIN_SET, HIGH) = %d\n", err);
+ return (err);
+ }
+
+ DELAY(1);
+ err = GPIOBUS_PIN_SETFLAGS(bus, dev, 0, GPIO_PIN_INPUT) ;
+ if (err != 0) {
+ device_printf(dev, "err(GPIOBUS_PIN_SETFLAGS, IN) = %d\n", err);
+ return (err);
+ }
+
+ DELAY(1);
+ return (0);
+}
+
+static int
+gpioths_dht_readbytes(device_t bus, device_t dev)
+{
+ struct gpioths_softc *sc;
+ uint32_t calibrations[GPIOTHS_DHT_CYCLES];
+ uint32_t intervals[GPIOTHS_DHT_CYCLES];
+ uint32_t err, avglen, value;
+ uint8_t crc, calc;
+ int i, offset, size;
+
+ sc = device_get_softc(dev);
+
+ err = gpioths_dht_initread(bus,dev);
+ if (err) {
+ device_printf(dev, "gpioths_dht_initread error = %d\n", err);
+ goto error;
+ }
+
+ err = gpioths_dht_timeuntil(bus, dev, GPIO_PIN_LOW, NULL);
+ if (err) {
+ device_printf(dev, "err(START) = %d\n", err);
+ goto error;
+ }
+
+ /* reading - 41 cycles */
+ for (i = 0; i < GPIOTHS_DHT_CYCLES; i++) {
+ err = gpioths_dht_timeuntil(bus, dev, GPIO_PIN_HIGH,
+ &calibrations[i]);
+ if (err) {
+ device_printf(dev, "err(CAL, %d) = %d\n", i, err);
+ goto error;
+ }
+ err = gpioths_dht_timeuntil(bus, dev, GPIO_PIN_LOW,
+ &intervals[i]);
+ if (err) {
+ device_printf(dev, "err(INTERVAL, %d) = %d\n", i, err);
+ goto error;
+ }
+ }
+
+ err = GPIOBUS_PIN_SETFLAGS(bus, dev, 0, GPIO_PIN_OUTPUT);
+ if (err != 0) {
+ device_printf(dev, "err(FINAL_SETFLAGS, OUT) = %d\n", err);
+ goto error;
+ }
+ DELAY(1);
+
+ /* Calculate average data calibration cycle length */
+ avglen = 0;
+ for (i = 1; i < GPIOTHS_DHT_CYCLES; i++)
+ avglen += calibrations[i];
+
+ avglen = avglen / (GPIOTHS_DHT_CYCLES - 1);
+
+ /* Calculate data */
+ value = 0;
+ offset = 1;
+ size = sizeof(value) * 8;
+ for (i = offset; i < size + offset; i++) {
+ value <<= 1;
+ if (intervals[i] > avglen)
+ value += 1;
+ }
+
+ /* Calculate CRC */
+ crc = 0;
+ offset = sizeof(value) * 8 + 1;
+ size = sizeof(crc) * 8;
+ for (i = offset; i < size + offset; i++) {
+ crc <<= 1;
+ if (intervals[i] > avglen)
+ crc += 1;
+ }
+
+ calc = 0;
+ for (i = 0; i < sizeof(value); i++)
+ calc += (value >> (8*i)) & GPIOTHS_DHT_ONEBYTEMASK;
+
+#ifdef GPIOTHS_DEBUG
+ /* Debug bits */
+ for (i = 0; i < GPIOTHS_DHT_CYCLES; i++)
+ device_printf(dev, "%d: %d %d\n", i, calibrations[i],
+ intervals[i]);
+
+ device_printf(dev, "len=%d, data=%x, crc=%x/%x\n", avglen, value, crc,
+ calc);
+#endif /* GPIOTHS_DEBUG */
+
+ /* CRC check */
+ if (calc != crc) {
+ err = -1;
+ goto error;
+ }
+
+ sc->fails = 0;
+ sc->temp = (value >> GPIOTHS_DHT_TEMP_SHIFT) & GPIOTHS_DHT_ONEBYTEMASK;
+ sc->hum = (value >> GPIOTHS_DHT_HUM_SHIFT) & GPIOTHS_DHT_ONEBYTEMASK;
+
+#ifdef GPIOTHS_DEBUG
+ /* Debug bits */
+ device_printf(dev, "fails=%d, temp=%d, hum=%d\n", sc->fails,
+ sc->temp, sc->hum);
+#endif /* GPIOTHS_DEBUG */
+
+ return (0);
+error:
+ sc->fails++;
+ return (err);
+}
+
+static void
+gpioths_poll(void *arg)
+{
+ struct gpioths_softc *sc;
+ device_t dev;
+
+ dev = (device_t)arg;
+ sc = device_get_softc(dev);
+
+ gpioths_dht_readbytes(device_get_parent(dev), dev);
+ callout_schedule(&sc->callout, GPIOTHS_POLLTIME * hz);
+}
+
+static int
+gpioths_temp_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct gpioths_softc *sc;
+ int value;
+
+ sc = (struct gpioths_softc*)arg1;
+ value = sc->temp;
+
+ return (sysctl_handle_int(oidp, &value, 0, req));
+}
+
+static int
+gpioths_hum_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct gpioths_softc *sc;
+ int value;
+
+ sc = (struct gpioths_softc*)arg1;
+ value = sc->hum;
+
+ return (sysctl_handle_int(oidp, &value, 0, req));
+}
+
+
+static int
+gpioths_fails_sysctl(SYSCTL_HANDLER_ARGS)
+{
+ struct gpioths_softc *sc;
+ int value;
+
+ sc = (struct gpioths_softc*)arg1;
+ value = sc->fails;
+
+ return (sysctl_handle_int(oidp, &value, 0, req));
+}
+
+static int
+gpioths_attach(device_t dev)
+{
+ struct gpioths_softc *sc;
+ struct sysctl_ctx_list *ctx;
+ struct sysctl_oid *tree;
+
+ sc = device_get_softc(dev);
+ ctx = device_get_sysctl_ctx(dev);
+ tree = device_get_sysctl_tree(dev);
+
+ sc->dev = dev;
+
+ callout_init(&sc->callout, 1);
+ callout_reset(&sc->callout, GPIOTHS_POLLTIME * hz, gpioths_poll, dev);
+
+ sc->temp_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
+ "temperature", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
+ gpioths_temp_sysctl, "I", "temperature(C)");
+
+ sc->hum_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
+ "humidity", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
+ gpioths_hum_sysctl, "I", "humidity(%)");
+
+ sc->fails_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
+ "fails", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
+ gpioths_fails_sysctl, "I", "fails since last successful read");
+
+ return (0);
+}
+
+static int
+gpioths_detach(device_t dev)
+{
+
+ return (0);
+}
+
+/* DDB bits */
+#include "opt_ddb.h"
+#ifdef DDB
+#include <ddb/ddb.h>
+#include <ddb/db_lex.h>
+#include <sys/cons.h>
+
+static struct command_table db_gpioths_table = LIST_HEAD_INITIALIZER(db_t4_table);
+_DB_SET(_show, gpioths, NULL, db_show_table, 0, &db_gpioths_table);
+
+DB_FUNC(read, db_show_gpiothsread, db_gpioths_table, CS_OWN, NULL)
+{
+ device_t dev;
+ int t;
+ int init;
+
+ init = 0;
+ t = db_read_token();
+ if (t == tIDENT) {
+ dev = device_lookup_by_name(db_tok_string);
+ init = 1;
+ }
+
+ db_skip_to_eol();
+
+ if (init)
+ db_printf("read: 0x%x\n",
+ gpioths_dht_readbytes(dev, device_get_parent(dev)));
+ else
+ db_printf("usage: show gpioths read <gpiothsdevice>\n");
+
+return;
+}
+#endif /* DDB */
+
+/* Driver bits */
+static device_method_t gpioths_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, gpioths_probe),
+ DEVMETHOD(device_attach, gpioths_attach),
+ DEVMETHOD(device_detach, gpioths_detach),
+
+ DEVMETHOD_END
+};
+
+DEFINE_CLASS_0(gpioths, gpioths_driver, gpioths_methods, sizeof(struct gpioths_softc));
+DRIVER_MODULE(gpioths, gpiobus, gpioths_driver, gpioths_devclass, 0, 0);
More information about the svn-src-head
mailing list