svn commit: r295323 - head/sys/dev/e1000
Eric Joyner
erj at FreeBSD.org
Fri Feb 5 17:14:39 UTC 2016
Author: erj
Date: Fri Feb 5 17:14:37 2016
New Revision: 295323
URL: https://svnweb.freebsd.org/changeset/base/295323
Log:
Update em(4) to 7.6.1; update igb(4) to 2.5.3.
Major changes:
- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).
- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf
- Avoton (i354) PHY errata workaround added
And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.
Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation
Modified:
head/sys/dev/e1000/e1000_80003es2lan.c
head/sys/dev/e1000/e1000_82540.c
head/sys/dev/e1000/e1000_82541.c
head/sys/dev/e1000/e1000_82542.c
head/sys/dev/e1000/e1000_82543.c
head/sys/dev/e1000/e1000_82571.h
head/sys/dev/e1000/e1000_82575.c
head/sys/dev/e1000/e1000_82575.h
head/sys/dev/e1000/e1000_api.c
head/sys/dev/e1000/e1000_defines.h
head/sys/dev/e1000/e1000_hw.h
head/sys/dev/e1000/e1000_i210.c
head/sys/dev/e1000/e1000_ich8lan.c
head/sys/dev/e1000/e1000_ich8lan.h
head/sys/dev/e1000/e1000_mac.h
head/sys/dev/e1000/e1000_mbx.c
head/sys/dev/e1000/e1000_nvm.h
head/sys/dev/e1000/e1000_osdep.h
head/sys/dev/e1000/e1000_phy.c
head/sys/dev/e1000/e1000_regs.h
head/sys/dev/e1000/if_em.c
head/sys/dev/e1000/if_em.h
head/sys/dev/e1000/if_igb.c
Modified: head/sys/dev/e1000/e1000_80003es2lan.c
==============================================================================
--- head/sys/dev/e1000/e1000_80003es2lan.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_80003es2lan.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -851,11 +851,17 @@ static s32 e1000_reset_hw_80003es2lan(st
e1000_release_phy_80003es2lan(hw);
/* Disable IBIST slave mode (far-end loopback) */
- e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- &kum_reg_data);
- kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
- e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- kum_reg_data);
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_INBAND_PARAM, &kum_reg_data);
+ if (!ret_val) {
+ kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ kum_reg_data);
+ if (ret_val)
+ DEBUGOUT("Error disabling far-end loopback\n");
+ } else
+ DEBUGOUT("Error disabling far-end loopback\n");
ret_val = e1000_get_auto_rd_done_generic(hw);
if (ret_val)
@@ -911,11 +917,18 @@ static s32 e1000_init_hw_80003es2lan(str
return ret_val;
/* Disable IBIST slave mode (far-end loopback) */
- e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- &kum_reg_data);
- kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
- e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- kum_reg_data);
+ ret_val =
+ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ &kum_reg_data);
+ if (!ret_val) {
+ kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ kum_reg_data);
+ if (ret_val)
+ DEBUGOUT("Error disabling far-end loopback\n");
+ } else
+ DEBUGOUT("Error disabling far-end loopback\n");
/* Set the transmit descriptor write-back policy */
reg_data = E1000_READ_REG(hw, E1000_TXDCTL(0));
Modified: head/sys/dev/e1000/e1000_82540.c
==============================================================================
--- head/sys/dev/e1000/e1000_82540.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82540.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -66,7 +66,7 @@ static s32 e1000_read_mac_addr_82540(st
static s32 e1000_init_phy_params_82540(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
phy->addr = 1;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
@@ -329,7 +329,7 @@ static s32 e1000_init_hw_82540(struct e1
{
struct e1000_mac_info *mac = &hw->mac;
u32 txdctl, ctrl_ext;
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 i;
DEBUGFUNC("e1000_init_hw_82540");
@@ -411,7 +411,7 @@ static s32 e1000_init_hw_82540(struct e1
static s32 e1000_setup_copper_link_82540(struct e1000_hw *hw)
{
u32 ctrl;
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 data;
DEBUGFUNC("e1000_setup_copper_link_82540");
@@ -498,7 +498,7 @@ out:
**/
static s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 nvm_data;
DEBUGFUNC("e1000_adjust_serdes_amplitude_82540");
@@ -528,7 +528,7 @@ out:
**/
static s32 e1000_set_vco_speed_82540(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 default_page = 0;
u16 phy_data;
Modified: head/sys/dev/e1000/e1000_82541.c
==============================================================================
--- head/sys/dev/e1000/e1000_82541.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82541.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -85,7 +85,7 @@ static const u16 e1000_igp_cable_length_
static s32 e1000_init_phy_params_82541(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
DEBUGFUNC("e1000_init_phy_params_82541");
@@ -295,7 +295,7 @@ void e1000_init_function_pointers_82541(
**/
static s32 e1000_reset_hw_82541(struct e1000_hw *hw)
{
- u32 ledctl, ctrl, icr, manc;
+ u32 ledctl, ctrl, manc;
DEBUGFUNC("e1000_reset_hw_82541");
@@ -317,6 +317,7 @@ static s32 e1000_reset_hw_82541(struct e
/* Must reset the Phy before resetting the MAC */
if ((hw->mac.type == e1000_82541) || (hw->mac.type == e1000_82547)) {
E1000_WRITE_REG(hw, E1000_CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ E1000_WRITE_FLUSH(hw);
msec_delay(5);
}
@@ -359,7 +360,7 @@ static s32 e1000_reset_hw_82541(struct e
E1000_WRITE_REG(hw, E1000_IMC, 0xFFFFFFFF);
/* Clear any pending interrupt events. */
- icr = E1000_READ_REG(hw, E1000_ICR);
+ E1000_READ_REG(hw, E1000_ICR);
return E1000_SUCCESS;
}
Modified: head/sys/dev/e1000/e1000_82542.c
==============================================================================
--- head/sys/dev/e1000/e1000_82542.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82542.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -317,7 +317,7 @@ static s32 e1000_init_hw_82542(struct e1
static s32 e1000_setup_link_82542(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
DEBUGFUNC("e1000_setup_link_82542");
@@ -565,7 +565,7 @@ static void e1000_clear_hw_cntrs_82542(s
*
* Reads the device MAC address from the EEPROM and stores the value.
**/
-static s32 e1000_read_mac_addr_82542(struct e1000_hw *hw)
+s32 e1000_read_mac_addr_82542(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
u16 offset, nvm_data, i;
Modified: head/sys/dev/e1000/e1000_82543.c
==============================================================================
--- head/sys/dev/e1000/e1000_82543.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82543.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -900,7 +900,7 @@ static s32 e1000_phy_hw_reset_82543(stru
**/
static s32 e1000_reset_hw_82543(struct e1000_hw *hw)
{
- u32 ctrl, icr;
+ u32 ctrl;
s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_reset_hw_82543");
@@ -942,7 +942,7 @@ static s32 e1000_reset_hw_82543(struct e
/* Masking off and clearing any pending interrupts */
E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
- icr = E1000_READ_REG(hw, E1000_ICR);
+ E1000_READ_REG(hw, E1000_ICR);
return ret_val;
}
Modified: head/sys/dev/e1000/e1000_82571.h
==============================================================================
--- head/sys/dev/e1000/e1000_82571.h Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82571.h Fri Feb 5 17:14:37 2016 (r295323)
@@ -50,9 +50,10 @@
#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAC_MASK_82574 0x01F00000
-#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
+#define E1000_IVAR_INT_ALLOC_VALID 0x8
-#define E1000_RXCFGL 0x0B634 /* TimeSync Rx EtherType & Msg Type Reg - RW */
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM 0x6000
#define E1000_BASE1000T_STATUS 10
#define E1000_IDLE_ERROR_COUNT_MASK 0xFF
Modified: head/sys/dev/e1000/e1000_82575.c
==============================================================================
--- head/sys/dev/e1000/e1000_82575.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82575.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -278,6 +278,11 @@ static s32 e1000_init_phy_params_82575(s
if (ret_val)
goto out;
}
+ if (phy->id == M88E1543_E_PHY_ID) {
+ ret_val = e1000_initialize_M88E1543_phy(hw);
+ if (ret_val)
+ goto out;
+ }
break;
case IGP03E1000_E_PHY_ID:
case IGP04E1000_E_PHY_ID:
@@ -1235,7 +1240,7 @@ static s32 e1000_check_for_link_media_sw
DEBUGFUNC("e1000_check_for_link_media_swap");
- /* Check the copper medium. */
+ /* Check for copper. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
if (ret_val)
return ret_val;
@@ -1247,7 +1252,7 @@ static s32 e1000_check_for_link_media_sw
if (data & E1000_M88E1112_STATUS_LINK)
port = E1000_MEDIA_PORT_COPPER;
- /* Check the other medium. */
+ /* Check for other. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
if (ret_val)
return ret_val;
@@ -1256,11 +1261,6 @@ static s32 e1000_check_for_link_media_sw
if (ret_val)
return ret_val;
- /* reset page to 0 */
- ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
- if (ret_val)
- return ret_val;
-
if (data & E1000_M88E1112_STATUS_LINK)
port = E1000_MEDIA_PORT_OTHER;
@@ -1268,8 +1268,20 @@ static s32 e1000_check_for_link_media_sw
if (port && (hw->dev_spec._82575.media_port != port)) {
hw->dev_spec._82575.media_port = port;
hw->dev_spec._82575.media_changed = TRUE;
+ }
+
+ if (port == E1000_MEDIA_PORT_COPPER) {
+ /* reset page to 0 */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+ e1000_check_for_link_82575(hw);
} else {
- ret_val = e1000_check_for_link_82575(hw);
+ e1000_check_for_link_82575(hw);
+ /* reset page to 0 */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
}
return E1000_SUCCESS;
@@ -2136,7 +2148,13 @@ void e1000_rx_fifo_flush_82575(struct e1
u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
int i, ms_wait;
- DEBUGFUNC("e1000_rx_fifo_workaround_82575");
+ DEBUGFUNC("e1000_rx_fifo_flush_82575");
+
+ /* disable IPv6 options as per hardware errata */
+ rfctl = E1000_READ_REG(hw, E1000_RFCTL);
+ rfctl |= E1000_RFCTL_IPV6_EX_DIS;
+ E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
+
if (hw->mac.type != e1000_82575 ||
!(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
return;
@@ -2164,7 +2182,6 @@ void e1000_rx_fifo_flush_82575(struct e1
* incoming packets are rejected. Set enable and wait 2ms so that
* any packet that was coming in as RCTL.EN was set is flushed
*/
- rfctl = E1000_READ_REG(hw, E1000_RFCTL);
E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
rlpml = E1000_READ_REG(hw, E1000_RLPML);
@@ -2806,7 +2823,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *
* e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
* @hw: pointer to the HW structure
*
- * Initialize Marverl 1512 to work correctly with Avoton.
+ * Initialize Marvell 1512 to work correctly with Avoton.
**/
s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
{
@@ -2892,13 +2909,114 @@ out:
}
/**
+ * e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_initialize_M88E1543_phy");
+
+ /* Check if this is correct PHY. */
+ if (phy->id != M88E1543_E_PHY_ID)
+ goto out;
+
+ /* Switch to PHY page 0xFF. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+ if (ret_val)
+ goto out;
+
+ /* Switch to PHY page 0xFB. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D);
+ if (ret_val)
+ goto out;
+
+ /* Switch to PHY page 0x12. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+ if (ret_val)
+ goto out;
+
+ /* Change mode to SGMII-to-Copper */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+ if (ret_val)
+ goto out;
+
+ /* Switch to PHY page 1. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+ if (ret_val)
+ goto out;
+
+ /* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+ if (ret_val)
+ goto out;
+
+ /* Return the PHY to page 0. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.commit(hw);
+ if (ret_val) {
+ DEBUGOUT("Error committing the PHY changes\n");
+ return ret_val;
+ }
+
+ msec_delay(1000);
+out:
+ return ret_val;
+}
+
+/**
* e1000_set_eee_i350 - Enable/disable EEE support
* @hw: pointer to the HW structure
+ * @adv1g: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
*
* Enable/disable EEE based on setting in dev_spec structure.
*
**/
-s32 e1000_set_eee_i350(struct e1000_hw *hw)
+s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M)
{
u32 ipcnfg, eeer;
@@ -2914,7 +3032,16 @@ s32 e1000_set_eee_i350(struct e1000_hw *
if (!(hw->dev_spec._82575.eee_disable)) {
u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU);
- ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
+ if (adv100M)
+ ipcnfg |= E1000_IPCNFG_EEE_100M_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN;
+
+ if (adv1G)
+ ipcnfg |= E1000_IPCNFG_EEE_1G_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN;
+
eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
E1000_EEER_LPI_FC);
@@ -2938,11 +3065,13 @@ out:
/**
* e1000_set_eee_i354 - Enable/disable EEE support
* @hw: pointer to the HW structure
+ * @adv1g: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
*
* Enable/disable EEE legacy mode based on setting in dev_spec structure.
*
**/
-s32 e1000_set_eee_i354(struct e1000_hw *hw)
+s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val = E1000_SUCCESS;
@@ -2984,8 +3113,16 @@ s32 e1000_set_eee_i354(struct e1000_hw *
if (ret_val)
goto out;
- phy_data |= E1000_EEE_ADV_100_SUPPORTED |
- E1000_EEE_ADV_1000_SUPPORTED;
+ if (adv100M)
+ phy_data |= E1000_EEE_ADV_100_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_100_SUPPORTED;
+
+ if (adv1G)
+ phy_data |= E1000_EEE_ADV_1000_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED;
+
ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
E1000_EEE_ADV_DEV_I354,
phy_data);
Modified: head/sys/dev/e1000/e1000_82575.h
==============================================================================
--- head/sys/dev/e1000/e1000_82575.h Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_82575.h Fri Feb 5 17:14:37 2016 (r295323)
@@ -495,10 +495,11 @@ void e1000_rlpml_set_vf(struct e1000_hw
s32 e1000_promisc_set_vf(struct e1000_hw *, enum e1000_promisc_type type);
u16 e1000_rxpbs_adjust_82580(u32 data);
s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data);
-s32 e1000_set_eee_i350(struct e1000_hw *);
-s32 e1000_set_eee_i354(struct e1000_hw *);
+s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M);
+s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M);
s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *);
s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw);
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw);
/* I2C SDA and SCL timing parameters for standard mode */
#define E1000_I2C_T_HD_STA 4
Modified: head/sys/dev/e1000/e1000_api.c
==============================================================================
--- head/sys/dev/e1000/e1000_api.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_api.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -299,6 +299,13 @@ s32 e1000_set_mac_type(struct e1000_hw *
case E1000_DEV_ID_PCH_I218_V3:
mac->type = e1000_pch_lpt;
break;
+ case E1000_DEV_ID_PCH_SPT_I219_LM:
+ case E1000_DEV_ID_PCH_SPT_I219_V:
+ case E1000_DEV_ID_PCH_SPT_I219_LM2:
+ case E1000_DEV_ID_PCH_SPT_I219_V2:
+ case E1000_DEV_ID_PCH_LBG_I219_LM3:
+ mac->type = e1000_pch_spt;
+ break;
case E1000_DEV_ID_82575EB_COPPER:
case E1000_DEV_ID_82575EB_FIBER_SERDES:
case E1000_DEV_ID_82575GB_QUAD_COPPER:
@@ -449,6 +456,7 @@ s32 e1000_setup_init_funcs(struct e1000_
case e1000_pchlan:
case e1000_pch2lan:
case e1000_pch_lpt:
+ case e1000_pch_spt:
e1000_init_function_pointers_ich8lan(hw);
break;
case e1000_82575:
Modified: head/sys/dev/e1000/e1000_defines.h
==============================================================================
--- head/sys/dev/e1000/e1000_defines.h Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_defines.h Fri Feb 5 17:14:37 2016 (r295323)
@@ -197,6 +197,8 @@
#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */
+#define E1000_RCTL_RDMTS_HEX 0x00010000
+#define E1000_RCTL_RDMTS1_HEX E1000_RCTL_RDMTS_HEX
#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
@@ -753,6 +755,12 @@
#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */
#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */
+/* HH Time Sync */
+#define E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK 0x0000F000 /* max delay */
+#define E1000_TSYNCTXCTL_SYNC_COMP_ERR 0x20000000 /* sync err */
+#define E1000_TSYNCTXCTL_SYNC_COMP 0x40000000 /* sync complete */
+#define E1000_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */
+
#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */
#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */
#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
@@ -849,6 +857,7 @@
#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */
#define E1000_M88E1543_EEE_CTRL_1 0x0
#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */
+#define E1000_M88E1543_FIBER_CTRL 0x0 /* Fiber Control Register */
#define E1000_EEE_ADV_DEV_I354 7
#define E1000_EEE_ADV_ADDR_I354 60
#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */
@@ -1020,9 +1029,7 @@
/* NVM Addressing bits based on type 0=small, 1=large */
#define E1000_EECD_ADDR_BITS 0x00000400
#define E1000_EECD_TYPE 0x00002000 /* NVM Type (1-SPI, 0-Microwire) */
-#ifndef E1000_NVM_GRANT_ATTEMPTS
#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
-#endif
#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
#define E1000_EECD_SIZE_EX_SHIFT 11
Modified: head/sys/dev/e1000/e1000_hw.h
==============================================================================
--- head/sys/dev/e1000/e1000_hw.h Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_hw.h Fri Feb 5 17:14:37 2016 (r295323)
@@ -137,6 +137,11 @@ struct e1000_hw;
#define E1000_DEV_ID_PCH_I218_V2 0x15A1
#define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */
#define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_LM 0x156F /* Sunrise Point PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_V 0x1570 /* Sunrise Point PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_LM2 0x15B7 /* Sunrise Point-H PCH */
+#define E1000_DEV_ID_PCH_SPT_I219_V2 0x15B8 /* Sunrise Point-H PCH */
+#define E1000_DEV_ID_PCH_LBG_I219_LM3 0x15B9 /* LEWISBURG PCH */
#define E1000_DEV_ID_82576 0x10C9
#define E1000_DEV_ID_82576_FIBER 0x10E6
#define E1000_DEV_ID_82576_SERDES 0x10E7
@@ -222,6 +227,7 @@ enum e1000_mac_type {
e1000_pchlan,
e1000_pch2lan,
e1000_pch_lpt,
+ e1000_pch_spt,
e1000_82575,
e1000_82576,
e1000_82580,
@@ -805,7 +811,7 @@ struct e1000_mac_info {
enum e1000_serdes_link_state serdes_link_state;
bool serdes_has_link;
bool tx_pkt_filtering;
- u32 max_frame_size;
+ u32 max_frame_size;
};
struct e1000_phy_info {
Modified: head/sys/dev/e1000/e1000_i210.c
==============================================================================
--- head/sys/dev/e1000/e1000_i210.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_i210.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -883,6 +883,35 @@ static s32 e1000_pll_workaround_i210(str
}
/**
+ * e1000_get_cfg_done_i210 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 e1000_get_cfg_done_i210(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ DEBUGFUNC("e1000_get_cfg_done_i210");
+
+ while (timeout) {
+ if (E1000_READ_REG(hw, E1000_EEMNGCTL_I210) & mask)
+ break;
+ msec_delay(1);
+ timeout--;
+ }
+ if (!timeout)
+ DEBUGOUT("MNG configuration cycle has not completed.\n");
+
+ return E1000_SUCCESS;
+}
+
+/**
* e1000_init_hw_i210 - Init hw for I210/I211
* @hw: pointer to the HW structure
*
@@ -899,6 +928,7 @@ s32 e1000_init_hw_i210(struct e1000_hw *
if (ret_val != E1000_SUCCESS)
return ret_val;
}
+ hw->phy.ops.get_cfg_done = e1000_get_cfg_done_i210;
ret_val = e1000_init_hw_82575(hw);
return ret_val;
}
Modified: head/sys/dev/e1000/e1000_ich8lan.c
==============================================================================
--- head/sys/dev/e1000/e1000_ich8lan.c Fri Feb 5 16:48:03 2016 (r295322)
+++ head/sys/dev/e1000/e1000_ich8lan.c Fri Feb 5 17:14:37 2016 (r295323)
@@ -92,10 +92,13 @@ static s32 e1000_set_d3_lplu_state_ich8
bool active);
static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
+static s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw);
static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw);
+static s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw);
static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw,
u16 *data);
static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
@@ -123,6 +126,14 @@ static s32 e1000_read_flash_byte_ich8la
u32 offset, u8 *data);
static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
u8 size, u16 *data);
+static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset,
+ u32 *data);
+static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw,
+ u32 offset, u32 *data);
+static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw,
+ u32 offset, u32 data);
+static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw,
+ u32 offset, u32 dword);
static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw,
u32 offset, u16 *data);
static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
@@ -232,16 +243,21 @@ static bool e1000_phy_is_accessible_pchl
if (ret_val)
return FALSE;
out:
- if (hw->mac.type == e1000_pch_lpt) {
- /* Unforce SMBus mode in PHY */
- hw->phy.ops.read_reg_locked(hw, CV_SMB_CTRL, &phy_reg);
- phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
- hw->phy.ops.write_reg_locked(hw, CV_SMB_CTRL, phy_reg);
+ if ((hw->mac.type == e1000_pch_lpt) ||
+ (hw->mac.type == e1000_pch_spt)) {
+ /* Only unforce SMBus if ME is not active */
+ if (!(E1000_READ_REG(hw, E1000_FWSM) &
+ E1000_ICH_FWSM_FW_VALID)) {
+ /* Unforce SMBus mode in PHY */
+ hw->phy.ops.read_reg_locked(hw, CV_SMB_CTRL, &phy_reg);
+ phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ hw->phy.ops.write_reg_locked(hw, CV_SMB_CTRL, phy_reg);
- /* Unforce SMBus mode in MAC */
- mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
- mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
- E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg);
+ /* Unforce SMBus mode in MAC */
+ mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg);
+ }
}
return TRUE;
@@ -328,6 +344,7 @@ static s32 e1000_init_phy_workarounds_pc
*/
switch (hw->mac.type) {
case e1000_pch_lpt:
+ case e1000_pch_spt:
if (e1000_phy_is_accessible_pchlan(hw))
break;
@@ -475,6 +492,7 @@ static s32 e1000_init_phy_params_pchlan(
/* fall-through */
case e1000_pch2lan:
case e1000_pch_lpt:
+ case e1000_pch_spt:
/* In case the PHY needs to be in mdio slow mode,
* set slow mode and try to get the PHY id again.
*/
@@ -617,36 +635,57 @@ static s32 e1000_init_nvm_params_ich8lan
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u32 gfpreg, sector_base_addr, sector_end_addr;
u16 i;
+ u32 nvm_size;
DEBUGFUNC("e1000_init_nvm_params_ich8lan");
- /* Can't read flash registers if the register set isn't mapped. */
nvm->type = e1000_nvm_flash_sw;
- if (!hw->flash_address) {
- DEBUGOUT("ERROR: Flash registers not mapped\n");
- return -E1000_ERR_CONFIG;
- }
- gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG);
+ if (hw->mac.type == e1000_pch_spt) {
+ /* in SPT, gfpreg doesn't exist. NVM size is taken from the
+ * STRAP register. This is because in SPT the GbE Flash region
+ * is no longer accessed through the flash registers. Instead,
+ * the mechanism has changed, and the Flash region access
+ * registers are now implemented in GbE memory space.
+ */
+ nvm->flash_base_addr = 0;
+ nvm_size =
+ (((E1000_READ_REG(hw, E1000_STRAP) >> 1) & 0x1F) + 1)
+ * NVM_SIZE_MULTIPLIER;
+ nvm->flash_bank_size = nvm_size / 2;
+ /* Adjust to word count */
+ nvm->flash_bank_size /= sizeof(u16);
+ /* Set the base address for flash register access */
+ hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR;
+ } else {
+ /* Can't read flash registers if register set isn't mapped. */
+ if (!hw->flash_address) {
+ DEBUGOUT("ERROR: Flash registers not mapped\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG);
- /* sector_X_addr is a "sector"-aligned address (4096 bytes)
- * Add 1 to sector_end_addr since this sector is included in
- * the overall size.
- */
- sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
- sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
-
- /* flash_base_addr is byte-aligned */
- nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
-
- /* find total size of the NVM, then cut in half since the total
- * size represents two separate NVM banks.
- */
- nvm->flash_bank_size = ((sector_end_addr - sector_base_addr)
- << FLASH_SECTOR_ADDR_SHIFT);
- nvm->flash_bank_size /= 2;
- /* Adjust to word count */
- nvm->flash_bank_size /= sizeof(u16);
+ /* sector_X_addr is a "sector"-aligned address (4096 bytes)
+ * Add 1 to sector_end_addr since this sector is included in
+ * the overall size.
+ */
+ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
+ sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+
+ /* flash_base_addr is byte-aligned */
+ nvm->flash_base_addr = sector_base_addr
+ << FLASH_SECTOR_ADDR_SHIFT;
+
+ /* find total size of the NVM, then cut in half since the total
+ * size represents two separate NVM banks.
+ */
+ nvm->flash_bank_size = ((sector_end_addr - sector_base_addr)
+ << FLASH_SECTOR_ADDR_SHIFT);
+ nvm->flash_bank_size /= 2;
+ /* Adjust to word count */
+ nvm->flash_bank_size /= sizeof(u16);
+ }
nvm->word_size = E1000_SHADOW_RAM_WORDS;
@@ -662,8 +701,13 @@ static s32 e1000_init_nvm_params_ich8lan
/* Function Pointers */
nvm->ops.acquire = e1000_acquire_nvm_ich8lan;
nvm->ops.release = e1000_release_nvm_ich8lan;
- nvm->ops.read = e1000_read_nvm_ich8lan;
- nvm->ops.update = e1000_update_nvm_checksum_ich8lan;
+ if (hw->mac.type == e1000_pch_spt) {
+ nvm->ops.read = e1000_read_nvm_spt;
+ nvm->ops.update = e1000_update_nvm_checksum_spt;
+ } else {
+ nvm->ops.read = e1000_read_nvm_ich8lan;
+ nvm->ops.update = e1000_update_nvm_checksum_ich8lan;
+ }
nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan;
nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan;
nvm->ops.write = e1000_write_nvm_ich8lan;
@@ -681,9 +725,6 @@ static s32 e1000_init_nvm_params_ich8lan
static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
-#if defined(QV_RELEASE) || !defined(NO_PCH_LPT_B0_SUPPORT)
- u16 pci_cfg;
-#endif /* QV_RELEASE || !defined(NO_PCH_LPT_B0_SUPPORT) */
DEBUGFUNC("e1000_init_mac_params_ich8lan");
@@ -752,15 +793,12 @@ static s32 e1000_init_mac_params_ich8lan
mac->ops.rar_set = e1000_rar_set_pch2lan;
/* fall-through */
case e1000_pch_lpt:
+ case e1000_pch_spt:
/* multicast address update for pch2 */
mac->ops.update_mc_addr_list =
e1000_update_mc_addr_list_pch2lan;
+ /* fall-through */
case e1000_pchlan:
-#if defined(QV_RELEASE) || !defined(NO_PCH_LPT_B0_SUPPORT)
- /* save PCH revision_id */
- e1000_read_pci_cfg(hw, E1000_PCI_REVISION_ID_REG, &pci_cfg);
- hw->revision_id = (u8)(pci_cfg &= 0x000F);
-#endif /* QV_RELEASE || !defined(NO_PCH_LPT_B0_SUPPORT) */
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
/* ID LED init */
@@ -777,7 +815,8 @@ static s32 e1000_init_mac_params_ich8lan
break;
}
- if (mac->type == e1000_pch_lpt) {
+ if ((mac->type == e1000_pch_lpt) ||
+ (mac->type == e1000_pch_spt)) {
mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
mac->ops.rar_set = e1000_rar_set_pch_lpt;
mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt;
@@ -1007,8 +1046,9 @@ release:
/* clear FEXTNVM6 bit 8 on link down or 10/100 */
fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK;
- if (!link || ((status & E1000_STATUS_SPEED_100) &&
- (status & E1000_STATUS_FD)))
+ if ((hw->phy.revision > 5) || !link ||
+ ((status & E1000_STATUS_SPEED_100) &&
+ (status & E1000_STATUS_FD)))
goto update_fextnvm6;
ret_val = hw->phy.ops.read_reg(hw, I217_INBAND_CTRL, ®);
@@ -1221,6 +1261,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000
u32 mac_reg;
s32 ret_val = E1000_SUCCESS;
u16 phy_reg;
+ u16 oem_reg = 0;
if ((hw->mac.type < e1000_pch_lpt) ||
(hw->device_id == E1000_DEV_ID_PCH_LPT_I217_LM) ||
@@ -1276,6 +1317,25 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000
mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg);
+ /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable
+ * LPLU and disable Gig speed when entering ULP
+ */
+ if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) {
+ ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS,
+ &oem_reg);
+ if (ret_val)
+ goto release;
+
+ phy_reg = oem_reg;
+ phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS;
+
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+ phy_reg);
+
+ if (ret_val)
+ goto release;
+ }
+
/* Set Inband ULP Exit, Reset to SMBus mode and
* Disable SMBus Release on PERST# in PHY
*/
@@ -1287,10 +1347,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000
if (to_sx) {
if (E1000_READ_REG(hw, E1000_WUFC) & E1000_WUFC_LNKC)
phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+ else
+ phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;
phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+ phy_reg &= ~I218_ULP_CONFIG1_INBAND_EXIT;
} else {
phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+ phy_reg &= ~I218_ULP_CONFIG1_STICKY_ULP;
+ phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST;
}
e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
@@ -1302,6 +1367,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000
/* Commit ULP changes in PHY by starting auto ULP configuration */
phy_reg |= I218_ULP_CONFIG1_START;
e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) &&
+ to_sx && (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+ oem_reg);
+ if (ret_val)
+ goto release;
+ }
+
release:
hw->phy.ops.release(hw);
out:
@@ -1352,10 +1426,10 @@ s32 e1000_disable_ulp_lpt_lp(struct e100
E1000_WRITE_REG(hw, E1000_H2ME, mac_reg);
}
- /* Poll up to 100msec for ME to clear ULP_CFG_DONE */
+ /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */
while (E1000_READ_REG(hw, E1000_FWSM) &
E1000_FWSM_ULP_CFG_DONE) {
- if (i++ == 10) {
+ if (i++ == 30) {
ret_val = -E1000_ERR_PHY;
goto out;
}
@@ -1429,6 +1503,8 @@ s32 e1000_disable_ulp_lpt_lp(struct e100
I218_ULP_CONFIG1_RESET_TO_SMBUS |
I218_ULP_CONFIG1_WOL_HOST |
I218_ULP_CONFIG1_INBAND_EXIT |
+ I218_ULP_CONFIG1_EN_ULP_LANPHYPC |
+ I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST |
I218_ULP_CONFIG1_DISABLE_SMB_PERST);
e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
@@ -1467,7 +1543,8 @@ out:
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
+ s32 ret_val, tipg_reg = 0;
+ u16 emi_addr, emi_val = 0;
bool link;
u16 phy_reg;
@@ -1500,35 +1577,119 @@ static s32 e1000_check_for_copper_link_i
* the IPG and reduce Rx latency in the PHY.
*/
if (((hw->mac.type == e1000_pch2lan) ||
- (hw->mac.type == e1000_pch_lpt)) && link) {
- u32 reg;
- reg = E1000_READ_REG(hw, E1000_STATUS);
- if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) {
- u16 emi_addr;
-
- reg = E1000_READ_REG(hw, E1000_TIPG);
- reg &= ~E1000_TIPG_IPGT_MASK;
- reg |= 0xFF;
- E1000_WRITE_REG(hw, E1000_TIPG, reg);
+ (hw->mac.type == e1000_pch_lpt) ||
+ (hw->mac.type == e1000_pch_spt)) && link) {
+ u16 speed, duplex;
+
+ e1000_get_speed_and_duplex_copper_generic(hw, &speed, &duplex);
+ tipg_reg = E1000_READ_REG(hw, E1000_TIPG);
+ tipg_reg &= ~E1000_TIPG_IPGT_MASK;
+ if (duplex == HALF_DUPLEX && speed == SPEED_10) {
+ tipg_reg |= 0xFF;
/* Reduce Rx latency in analog PHY */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
+ emi_val = 0;
+ } else if (hw->mac.type == e1000_pch_spt &&
+ duplex == FULL_DUPLEX && speed != SPEED_1000) {
+ tipg_reg |= 0xC;
+ emi_val = 1;
+ } else {
+ /* Roll back the default values */
+ tipg_reg |= 0x08;
+ emi_val = 1;
+ }
- if (hw->mac.type == e1000_pch2lan)
- emi_addr = I82579_RX_CONFIG;
+ E1000_WRITE_REG(hw, E1000_TIPG, tipg_reg);
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->mac.type == e1000_pch2lan)
+ emi_addr = I82579_RX_CONFIG;
+ else
+ emi_addr = I217_RX_CONFIG;
+ ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val);
+
+ if (hw->mac.type == e1000_pch_lpt ||
+ hw->mac.type == e1000_pch_spt) {
+ u16 phy_reg;
+
+ hw->phy.ops.read_reg_locked(hw, I217_PLL_CLOCK_GATE_REG,
+ &phy_reg);
+ phy_reg &= ~I217_PLL_CLOCK_GATE_MASK;
+ if (speed == SPEED_100 || speed == SPEED_10)
+ phy_reg |= 0x3E8;
else
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-head
mailing list