svn commit: r309825 - head/sys/dev/usb/wlan
Andriy Voskoboinyk
avos at FreeBSD.org
Sat Dec 10 18:47:15 UTC 2016
Author: avos
Date: Sat Dec 10 18:47:13 2016
New Revision: 309825
URL: https://svnweb.freebsd.org/changeset/base/309825
Log:
rsu: add promiscuous mode support.
- Add partial promiscuous mode support (no management frames;
they cannot be received by the firmware and net80211 at the same time).
- Add monitor mode support (all frames).
Tested with Asus, USB-N10.
Modified:
head/sys/dev/usb/wlan/if_rsu.c
head/sys/dev/usb/wlan/if_rsureg.h
Modified: head/sys/dev/usb/wlan/if_rsu.c
==============================================================================
--- head/sys/dev/usb/wlan/if_rsu.c Sat Dec 10 18:29:39 2016 (r309824)
+++ head/sys/dev/usb/wlan/if_rsu.c Sat Dec 10 18:47:13 2016 (r309825)
@@ -23,7 +23,7 @@ __FBSDID("$FreeBSD$");
*
* TODO:
* o tx a-mpdu
- * o monitor / hostap / ibss / mesh
+ * o hostap / ibss / mesh
* o power-save operation
*/
@@ -175,6 +175,7 @@ static void rsu_getradiocaps(struct ieee
static void rsu_set_channel(struct ieee80211com *);
static void rsu_scan_curchan(struct ieee80211_scan_state *, unsigned long);
static void rsu_scan_mindwell(struct ieee80211_scan_state *);
+static void rsu_update_promisc(struct ieee80211com *);
static uint8_t rsu_get_multi_pos(const uint8_t[]);
static void rsu_set_multi(struct rsu_softc *);
static void rsu_update_mcast(struct ieee80211com *);
@@ -202,6 +203,9 @@ static int rsu_read_rom(struct rsu_softc
static int rsu_fw_cmd(struct rsu_softc *, uint8_t, void *, int);
static void rsu_calib_task(void *, int);
static void rsu_tx_task(void *, int);
+static void rsu_set_led(struct rsu_softc *, int);
+static int rsu_monitor_newstate(struct ieee80211vap *,
+ enum ieee80211_state, int);
static int rsu_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int rsu_key_alloc(struct ieee80211vap *, struct ieee80211_key *,
ieee80211_keyix *, ieee80211_keyix *);
@@ -244,6 +248,9 @@ static struct mbuf *
static void rsu_txeof(struct usb_xfer *, struct rsu_data *);
static int rsu_raw_xmit(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_bpf_params *);
+static void rsu_rxfilter_init(struct rsu_softc *);
+static void rsu_rxfilter_set(struct rsu_softc *, uint32_t, uint32_t);
+static void rsu_rxfilter_refresh(struct rsu_softc *);
static void rsu_init(struct rsu_softc *);
static int rsu_tx_start(struct rsu_softc *, struct ieee80211_node *,
struct mbuf *, struct rsu_data *);
@@ -536,6 +543,7 @@ rsu_attach(device_t self)
/* Set device capabilities. */
ic->ic_caps =
IEEE80211_C_STA | /* station mode */
+ IEEE80211_C_MONITOR | /* monitor mode supported */
#if 0
IEEE80211_C_BGSCAN | /* Background scan. */
#endif
@@ -582,6 +590,7 @@ rsu_attach(device_t self)
ic->ic_scan_mindwell = rsu_scan_mindwell;
ic->ic_vap_create = rsu_vap_create;
ic->ic_vap_delete = rsu_vap_delete;
+ ic->ic_update_promisc = rsu_update_promisc;
ic->ic_update_mcast = rsu_update_mcast;
ic->ic_parent = rsu_parent;
ic->ic_transmit = rsu_transmit;
@@ -688,7 +697,10 @@ rsu_vap_create(struct ieee80211com *ic,
/* override state transition machine */
uvp->newstate = vap->iv_newstate;
- vap->iv_newstate = rsu_newstate;
+ if (opmode == IEEE80211_M_MONITOR)
+ vap->iv_newstate = rsu_monitor_newstate;
+ else
+ vap->iv_newstate = rsu_newstate;
vap->iv_key_alloc = rsu_key_alloc;
vap->iv_key_set = rsu_key_set;
vap->iv_key_delete = rsu_key_delete;
@@ -759,9 +771,30 @@ rsu_getradiocaps(struct ieee80211com *ic
}
static void
-rsu_set_channel(struct ieee80211com *ic __unused)
+rsu_set_channel(struct ieee80211com *ic)
{
- /* We are unable to switch channels, yet. */
+ struct rsu_softc *sc = ic->ic_softc;
+
+ /*
+ * Only need to set the channel in Monitor mode. AP scanning and auth
+ * are already taken care of by their respective firmware commands.
+ */
+ if (ic->ic_opmode == IEEE80211_M_MONITOR) {
+ struct r92s_set_channel cmd;
+ int error;
+
+ cmd.channel = IEEE80211_CHAN2IEEE(ic->ic_curchan);
+
+ RSU_LOCK(sc);
+ error = rsu_fw_cmd(sc, R92S_CMD_SET_CHANNEL, &cmd,
+ sizeof(cmd));
+ if (error != 0) {
+ device_printf(sc->sc_dev,
+ "%s: error %d setting channel\n", __func__,
+ error);
+ }
+ RSU_UNLOCK(sc);
+ }
}
static void
@@ -782,6 +815,17 @@ rsu_scan_mindwell(struct ieee80211_scan_
/* NB: don't try to abort scan; wait for firmware to finish */
}
+static void
+rsu_update_promisc(struct ieee80211com *ic)
+{
+ struct rsu_softc *sc = ic->ic_softc;
+
+ RSU_LOCK(sc);
+ if (sc->sc_running)
+ rsu_rxfilter_refresh(sc);
+ RSU_UNLOCK(sc);
+}
+
/*
* The same as rtwn_get_multi_pos() / rtwn_set_multi().
*/
@@ -1343,6 +1387,47 @@ rsu_set_fw_power_state(struct rsu_softc
return (error);
}
+static void
+rsu_set_led(struct rsu_softc *sc, int on)
+{
+ rsu_write_1(sc, R92S_LEDCFG,
+ (rsu_read_1(sc, R92S_LEDCFG) & 0xf0) | (!on << 3));
+}
+
+static int
+rsu_monitor_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate,
+ int arg)
+{
+ struct ieee80211com *ic = vap->iv_ic;
+ struct rsu_softc *sc = ic->ic_softc;
+ struct rsu_vap *uvp = RSU_VAP(vap);
+
+ if (vap->iv_state != nstate) {
+ IEEE80211_UNLOCK(ic);
+ RSU_LOCK(sc);
+
+ switch (nstate) {
+ case IEEE80211_S_INIT:
+ sc->sc_vap_is_running = 0;
+ rsu_set_led(sc, 0);
+ break;
+ case IEEE80211_S_RUN:
+ sc->sc_vap_is_running = 1;
+ rsu_set_led(sc, 1);
+ break;
+ default:
+ /* NOTREACHED */
+ break;
+ }
+ rsu_rxfilter_refresh(sc);
+
+ RSU_UNLOCK(sc);
+ IEEE80211_LOCK(ic);
+ }
+
+ return (uvp->newstate(vap, nstate, arg));
+}
+
static int
rsu_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
@@ -1376,6 +1461,12 @@ rsu_newstate(struct ieee80211vap *vap, e
RSU_LOCK(sc);
/* Disassociate from our current BSS. */
rsu_disconnect(sc);
+ usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(10));
+
+ /* Refresh Rx filter (may be modified by firmware). */
+ sc->sc_vap_is_running = 0;
+ rsu_rxfilter_refresh(sc);
+
/* Reinstall static keys. */
if (sc->sc_running)
rsu_reinit_static_keys(sc);
@@ -2030,6 +2121,11 @@ rsu_event_join_bss(struct rsu_softc *sc,
__func__, ether_sprintf(rsp->bss.macaddr), tmp);
/* XXX is this required? What's the top two bits for again? */
ni->ni_associd = tmp | 0xc000;
+
+ /* Refresh Rx filter (was changed by firmware). */
+ sc->sc_vap_is_running = 1;
+ rsu_rxfilter_refresh(sc);
+
RSU_UNLOCK(sc);
ieee80211_new_state(vap, IEEE80211_S_RUN,
IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
@@ -3329,6 +3425,65 @@ rsu_raw_xmit(struct ieee80211_node *ni,
}
static void
+rsu_rxfilter_init(struct rsu_softc *sc)
+{
+ uint32_t reg;
+
+ RSU_ASSERT_LOCKED(sc);
+
+ /* Setup multicast filter. */
+ rsu_set_multi(sc);
+
+ /* Adjust Rx filter. */
+ reg = rsu_read_4(sc, R92S_RCR);
+ reg &= ~R92S_RCR_AICV;
+ reg |= R92S_RCR_APP_PHYSTS;
+ rsu_write_4(sc, R92S_RCR, reg);
+
+ /* Update dynamic Rx filter parts. */
+ rsu_rxfilter_refresh(sc);
+}
+
+static void
+rsu_rxfilter_set(struct rsu_softc *sc, uint32_t clear, uint32_t set)
+{
+ /* NB: firmware can touch this register too. */
+ rsu_write_4(sc, R92S_RCR,
+ (rsu_read_4(sc, R92S_RCR) & ~clear) | set);
+}
+
+static void
+rsu_rxfilter_refresh(struct rsu_softc *sc)
+{
+ struct ieee80211com *ic = &sc->sc_ic;
+ uint32_t mask_all, mask_min;
+
+ RSU_ASSERT_LOCKED(sc);
+
+ /* NB: RCR_AMF / RXFLTMAP_MGT are used by firmware. */
+ mask_all = R92S_RCR_ACF | R92S_RCR_AAP;
+ mask_min = R92S_RCR_APM;
+ if (sc->sc_vap_is_running)
+ mask_min |= R92S_RCR_CBSSID;
+ else
+ mask_all |= R92S_RCR_ADF;
+
+ if (ic->ic_opmode == IEEE80211_M_MONITOR) {
+ uint16_t rxfltmap;
+ if (sc->sc_vap_is_running)
+ rxfltmap = 0;
+ else
+ rxfltmap = R92S_RXFLTMAP_MGT_DEF;
+ rsu_write_2(sc, R92S_RXFLTMAP_MGT, rxfltmap);
+ }
+
+ if (ic->ic_promisc == 0 && ic->ic_opmode != IEEE80211_M_MONITOR)
+ rsu_rxfilter_set(sc, mask_all, mask_min);
+ else
+ rsu_rxfilter_set(sc, mask_min, mask_all);
+}
+
+static void
rsu_init(struct rsu_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
@@ -3394,12 +3549,8 @@ rsu_init(struct rsu_softc *sc)
goto fail;
}
- /* Append PHY status. */
- rsu_write_4(sc, R92S_RCR,
- rsu_read_4(sc, R92S_RCR) | 0x02000000);
-
- /* Setup multicast filter (must be done after firmware loading). */
- rsu_set_multi(sc);
+ /* Initialize Rx filter. */
+ rsu_rxfilter_init(sc);
/* Set PS mode fully active */
error = rsu_set_fw_power_state(sc, RSU_PWR_ACTIVE);
@@ -3433,6 +3584,7 @@ rsu_stop(struct rsu_softc *sc)
RSU_ASSERT_LOCKED(sc);
sc->sc_running = 0;
+ sc->sc_vap_is_running = 0;
sc->sc_calibrating = 0;
taskqueue_cancel_timeout(taskqueue_thread, &sc->calib_task, NULL);
taskqueue_cancel(taskqueue_thread, &sc->tx_task, NULL);
Modified: head/sys/dev/usb/wlan/if_rsureg.h
==============================================================================
--- head/sys/dev/usb/wlan/if_rsureg.h Sat Dec 10 18:29:39 2016 (r309824)
+++ head/sys/dev/usb/wlan/if_rsureg.h Sat Dec 10 18:47:13 2016 (r309825)
@@ -54,6 +54,12 @@
#define R92S_TIMECTRL 0x0080
#define R92S_TSFTR (R92S_TIMECTRL + 0x000)
+#define R92S_FIFOCTRL 0x00a0
+#define R92S_RXFLTMAP_MGT (R92S_FIFOCTRL + 0x076)
+#define R92S_RXFLTMAP_CTL (R92S_FIFOCTRL + 0x078)
+#define R92S_RXFLTMAP_DATA (R92S_FIFOCTRL + 0x07a)
+#define R92S_RXFLTMAP_MESH (R92S_FIFOCTRL + 0x07c)
+
#define R92S_SECURITY 0x0240
#define R92S_CAMCMD (R92S_SECURITY + 0x000)
#define R92S_CAMWRITE (R92S_SECURITY + 0x004)
@@ -63,6 +69,7 @@
#define R92S_GPIO_CTRL (R92S_GP + 0x00c)
#define R92S_GPIO_IO_SEL (R92S_GP + 0x00e)
#define R92S_MAC_PINMUX_CTRL (R92S_GP + 0x011)
+#define R92S_LEDCFG (R92S_GP + 0x012)
#define R92S_IOCMD_CTRL 0x0370
#define R92S_IOCMD_DATA 0x0374
@@ -141,6 +148,29 @@
#define R92S_TCR_IMEM_RDY 0x20
#define R92S_TCR_FWRDY 0x80
+/* Bits for R92S_RCR. */
+#define R92S_RCR_AAP 0x00000001
+#define R92S_RCR_APM 0x00000002
+#define R92S_RCR_AM 0x00000004
+#define R92S_RCR_AB 0x00000008
+#define R92S_RCR_ACRC32 0x00000020
+#define R92S_RCR_AICV 0x00001000
+#define R92S_RCR_APP_ICV 0x00010000
+#define R92S_RCR_APP_MIC 0x00020000
+#define R92S_RCR_ADF 0x00040000
+#define R92S_RCR_ACF 0x00080000
+#define R92S_RCR_AMF 0x00100000
+#define R92S_RCR_ADD3 0x00200000
+#define R92S_RCR_APWRMGT 0x00400000
+#define R92S_RCR_CBSSID 0x00800000
+#define R92S_RCR_APP_PHYSTS 0x02000000
+#define R92S_RCR_ENMBID 0x08000000
+
+/* Bits for R92S_RXFLTMAP*. */
+#define R92S_RXFLTMAP_MGT_DEF 0x3f3f
+#define R92S_RXFLTMAP_FW(subtype) \
+ (1 << ((subtype) >> IEEE80211_FC0_SUBTYPE_SHIFT))
+
/* Bits for R92S_GPIO_IO_SEL. */
#define R92S_GPIO_WPS 0x10
@@ -546,6 +576,11 @@ struct r92s_set_pwr_mode {
uint8_t bcn_pass_time;
} __packed;
+/* Structure for R92S_CMD_SET_CHANNEL. */
+struct r92s_set_channel {
+ uint32_t channel;
+} __packed;
+
/* Structure for event R92S_EVENT_JOIN_BSS. */
struct r92s_event_join_bss {
uint32_t next;
@@ -817,6 +852,7 @@ struct rsu_softc {
int sc_currssi;
u_int sc_running:1,
+ sc_vap_is_running:1,
sc_calibrating:1,
sc_active_scan:1,
sc_extra_scan:1;
More information about the svn-src-head
mailing list