svn commit: r266855 - head/sys/dev/uart
Olivier Houchard
cognet at FreeBSD.org
Thu May 29 19:57:52 UTC 2014
Author: cognet
Date: Thu May 29 19:57:51 2014
New Revision: 266855
URL: http://svnweb.freebsd.org/changeset/base/266855
Log:
In the grab function, keep the bit 6 on in the IER, on XScale, using 0
turns the UART off, which is unfortunate if one want to use it as a console.
Modified:
head/sys/dev/uart/uart_dev_ns8250.c
Modified: head/sys/dev/uart/uart_dev_ns8250.c
==============================================================================
--- head/sys/dev/uart/uart_dev_ns8250.c Thu May 29 19:48:18 2014 (r266854)
+++ head/sys/dev/uart/uart_dev_ns8250.c Thu May 29 19:57:51 2014 (r266855)
@@ -929,6 +929,7 @@ void
ns8250_bus_grab(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
+ struct ns8250_softc *ns8250 = (struct ns8250_softc*)sc;
/*
* turn off all interrupts to enter polling mode. Leave the
@@ -936,7 +937,11 @@ ns8250_bus_grab(struct uart_softc *sc)
* All pending interupt signals are reset when IER is set to 0.
*/
uart_lock(sc->sc_hwmtx);
- uart_setreg(bas, REG_IER, 0);
+ /*
+ * On XScale, bit 6 (0x40) is the UART Unit Enable, removing it
+ * turns the UART completely off, so make sure it is stays there.
+ */
+ uart_setreg(bas, REG_IER, ns8250->ier & 0x40);
uart_barrier(bas);
uart_unlock(sc->sc_hwmtx);
}
More information about the svn-src-head
mailing list