svn commit: r268240 - in head: sbin/camcontrol sys/cam/scsi
Kenneth D. Merry
ken at FreeBSD.org
Thu Jul 3 23:09:46 UTC 2014
Author: ken
Date: Thu Jul 3 23:09:44 2014
New Revision: 268240
URL: http://svnweb.freebsd.org/changeset/base/268240
Log:
Add persistent reservation support to camcontrol(8).
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.
sbin/camcontrol/Makefile:
Add persist.c.
sbin/camcontrol/persist.c:
New persistent reservation support for camcontrol(8).
We have support for all known operation modes for PERSISTENT RESERVE
IN and PERSISTENT RESERVE OUT.
exceptions noted above.
sbin/camcontrol/camcontrol.8:
Document the new 'persist' subcommand.
In the section on the Transport ID (-I) option, explain what
Transport IDs for each protocol should look like. At some point
some of this information could probably get moved off in a
separate man page, either on Transport IDs alone or a man page
documenting the Transport ID parsing code.
Add a number of examples of persistent reservation commands.
Persistent Reservations are complex enough that the average user
probably won't be able to get the commands exactly right by just
reading the man page. These examples show a few basic and
advanced examples of how to use persistent reservations.
sbin/camcontrol/camcontrol.h:
Move the definition for camcontrol_optret here, so we can use it
for the persistent reservation code.
Add a definition for the new scsipersist() function.
sbin/camcontrol/camcontrol.c:
Add 'persist' to the list of subcommands.
Document 'persist' in the help text.
sys/cam/scsi/scsi_all.c:
Add the scsi_persistent_reserve_in() and
scsi_persistent_reserve_out() CCB building functions.
Add a new function, scsi_transportid_sbuf(). This takes a
SCSI Transport ID (documented in SPC-4), and prints it to
an sbuf(9). There are some transports (like ATA, USB, and
SSA) for which there is no transport defined. We need to
come up with a reasonable thing to do if we're presented
with a Transport ID that claims to be for one of those
protocols.
Add new routines scsi_get_nv() and scsi_nv_to_str().
These functions do a table lookup to go between a string and an
integer. There are lots of table lookups needed in the
persistent reservation code in camcontrol(8).
Add a new function, scsi_parse_transportid(), along with leaf node
functions to parse:
FC, 1394 and SAS (scsi_parse_transportid_64bit())
iSCSI (scsi_parse_transportid_iscsi())
SPI (scsi_parse_transportid_spi())
RDMA (scsi_parse_transportid_rdma())
PCIe (scsi_parse_transportid_sop())
Transport IDs. Given a string with the general form proto,id these
functions create a SCSI Transport ID structure.
sys/cam/scsi/scsi_all.h:
Update the various persistent reservation data structures to
SPC4r36l, but also rename some fields that were previously
obsolete with the proper names from older SCSI specs. This
allows using older, obsolete persistent reservation types when
desired.
Add function prototypes for the new persistent reservation CCB
building functions.
Add a data strucure for the READ FULL STATUS service action
of the PERSISTENT RESERVE IN command.
Add Transport ID structures for all protocols described in SPC-4.
Add a new series of SCSI_PROTO_XXX definitions, and
redefine other defines in terms of these new definitions.
Add a prototype for scsi_transportid_sbuf().
Change a couple of "obsolete" persistent reservation data
structure fields into something more meaningful, based on
what the field was called when it was defined in the spec.
(e.g. SPC, SPC-2, etc.)
Create a new define, SPRI_MAX_LEN, for the maximum allocation
length allowed for the PERSISTENT RESERVE IN command.
Add data structures and enumerations for the new name/value
translation functions.
Add data structures for SCSI over PCIe Routing IDs.
Bring the PERSISTENT RESERVE OUT Register and Move parameter list
structure (struct scsi_per_res_out_parms) up to date with SPC-4.
Add a data structure for the transport IDs that can optionally be
appended to the basic PERSISTENT RESERVE OUT parameter list.
Move SCSI protocol macro definitions out of the VPD page 0x83
definition and combine them with the more up to date protocol
definitions higher in the file.
Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
scsi_parse_transportid_sop(), and scsi_parse_transportid().
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
Added:
head/sbin/camcontrol/persist.c (contents, props changed)
Modified:
head/sbin/camcontrol/Makefile
head/sbin/camcontrol/camcontrol.8
head/sbin/camcontrol/camcontrol.c
head/sbin/camcontrol/camcontrol.h
head/sys/cam/scsi/scsi_all.c
head/sys/cam/scsi/scsi_all.h
Modified: head/sbin/camcontrol/Makefile
==============================================================================
--- head/sbin/camcontrol/Makefile Thu Jul 3 22:25:59 2014 (r268239)
+++ head/sbin/camcontrol/Makefile Thu Jul 3 23:09:44 2014 (r268240)
@@ -3,7 +3,7 @@
PROG= camcontrol
SRCS= camcontrol.c util.c
.if !defined(RELEASE_CRUNCH)
-SRCS+= fwdownload.c modeedit.c progress.c
+SRCS+= fwdownload.c modeedit.c persist.c progress.c
.else
CFLAGS+= -DMINIMALISTIC
.endif
Modified: head/sbin/camcontrol/camcontrol.8
==============================================================================
--- head/sbin/camcontrol/camcontrol.8 Thu Jul 3 22:25:59 2014 (r268239)
+++ head/sbin/camcontrol/camcontrol.8 Thu Jul 3 23:09:44 2014 (r268240)
@@ -27,7 +27,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd September 6, 2013
+.Dd November 20, 2013
.Dt CAMCONTROL 8
.Os
.Sh NAME
@@ -269,6 +269,21 @@
.Op Fl U Ar pwd
.Op Fl y
.Nm
+.Ic persist
+.Op device id
+.Op generic args
+.Aq Fl i Ar action | Fl o Ar action
+.Op Fl a
+.Op Fl I Ar trans_id
+.Op Fl k Ar key
+.Op Fl K Ar sa_key
+.Op Fl p
+.Op Fl R Ar rel_tgt_port
+.Op Fl s Ar scope
+.Op Fl S
+.Op Fl T Ar res_type
+.Op Fl U
+.Nm
.Ic help
.Sh DESCRIPTION
The
@@ -1473,6 +1488,276 @@ to output a line for every firmware segm
fwdownload command
-- the same as the ones shown in simulation mode.
.El
+.It Ic persist
+Persistent reservation support.
+Persistent reservations are a way to reserve a particular
+.Tn SCSI
+LUN for use by one or more
+.Tn SCSI
+initiators.
+If the
+.Fl i
+option is specified,
+.Nm
+will issue the
+.Tn SCSI
+PERSISTENT RESERVE IN
+command using the requested service action.
+If the
+.Fl o
+option is specified,
+.Nm
+will issue the
+.Tn SCSI
+PERSISTENT RESERVE OUT
+command using the requested service action.
+One of those two options is required.
+.Pp
+Persistent reservations are complex, and fully explaining them is outside
+the scope of this manual.
+Please visit
+http://www.t10.org
+and download the latest SPC spec for a full explanation of persistent
+reservations.
+.Bl -tag -width 8n
+.It Fl i Ar mode
+Specify the service action for the PERSISTENT RESERVE IN command.
+Supported service actions:
+.Bl -tag -width 19n
+.It read_keys
+Report the current persistent reservation generation (PRgeneration) and any
+registered keys.
+.It read_reservation
+Report the persistent reservation, if any.
+.It report_capabilities
+Report the persistent reservation capabilities of the LUN.
+.It read_full_status
+Report the full status of persistent reservations on the LUN.
+.El
+.It Fl o Ar mode
+Specify the service action for the PERSISTENT RESERVE OUT command.
+For service actions like register that are components of other service
+action names, the entire name must be specified.
+Otherwise, enough of the service action name must be specified to
+distinguish it from other possible service actions.
+Supported service actions:
+.Bl -tag -width 15n
+.It register
+Register a reservation key with the LUN or unregister a reservation key.
+To register a key, specify the requested key as the Service Action
+Reservation Key.
+To unregister a key, specify the previously registered key as the
+Reservation Key.
+To change a key, specify the old key as the Reservation Key and the new
+key as the Service Action Reservation Key.
+.It register_ignore
+This is similar to the register subcommand, except that the Reservation Key
+is ignored.
+The Service Action Reservation Key will overwrite any previous key
+registered for the initiator.
+.It reserve
+Create a reservation.
+A key must be registered with the LUN before the LUN can be reserved, and
+it must be specified as the Reservation Key.
+The type of reservation must also be specified.
+The scope defaults to LUN scope (LU_SCOPE), but may be changed.
+.It release
+Release a reservation.
+The Reservation Key must be specified.
+.It clear
+Release a reservation and remove all keys from the device.
+The Reservation Key must be specified.
+.It preempt
+Remove a reservation belonging to another initiator.
+The Reservation Key must be specified.
+The Service Action Reservation Key may be specified, depending on the
+operation being performed.
+.It preempt_abort
+Remove a reservation belonging to another initiator and abort all
+outstanding commands from that initiator.
+The Reservation Key must be specified.
+The Service Action Reservation Key may be specified, depending on the
+operation being performed.
+.It register_move
+Register another initiator with the LUN, and establish a reservation on the
+LUN for that initiator.
+The Reservation Key and Service Action Reservation Key must be specified.
+.It replace_lost
+Replace Lost Reservation information.
+.El
+.It Fl a
+Set the All Target Ports (ALL_TG_PT) bit.
+This requests that the key registration be applied to all target ports and
+not just the particular target port that receives the command.
+This only applies to the register and register_ignore actions.
+.It Fl I Ar tid
+Specify a Transport ID.
+This only applies to the Register and Register and Move service actions for
+Persistent Reserve Out.
+Multiple Transport IDs may be specified with multiple
+.Fl I
+arguments.
+With the Register service action, specifying one or more Transport IDs
+implicitly enables the
+.Fl S
+option which turns on the SPEC_I_PT bit.
+Transport IDs generally have the format protocol,id.
+.Bl -tag -width 5n
+.It SAS
+A SAS Transport ID consists of
+.Dq sas,
+followed by a 64-bit SAS address.
+For example:
+.Pp
+.Dl sas,0x1234567812345678
+.It FC
+A Fibre Channel Transport ID consists of
+.Dq fcp,
+followed by a 64-bit Fibre Channel World Wide Name.
+For example:
+.Pp
+.Dl fcp,0x1234567812345678
+.It SPI
+A Parallel SCSI address consists of
+.Dq spi,
+followed by a SCSI target ID and a relative target port identifier.
+For example:
+.Pp
+.Dl spi,4,1
+.It 1394
+An IEEE 1394 (Firewire) Transport ID consists of
+.Dq sbp,
+followed by a 64-bit EUI-64 IEEE 1394 node unique identifier.
+For example:
+.Pp
+.Dl sbp,0x1234567812345678
+.It RDMA
+A SCSI over RDMA Transport ID consists of
+.Dq srp,
+followed by a 128-bit RDMA initiator port identifier.
+The port identifier must be exactly 32 or 34 (if the leading 0x is
+included) hexadecimal digits.
+Only hexadecimal (base 16) numbers are supported.
+For example:
+.Pp
+.Dl srp,0x12345678123456781234567812345678
+.It iSCSI
+An iSCSI Transport ID consists an iSCSI name and optionally a separator and
+iSCSI session ID.
+For example, if only the iSCSI name is specified:
+.Pp
+.Dl iqn.2012-06.com.example:target0
+.Pp
+If the iSCSI separator and initiator session ID are specified:
+.Pp
+.Dl iqn.2012-06.com.example:target0,i,0x123
+.It PCIe
+A SCSI over PCIe Transport ID consists of
+.Dq sop,
+followed by a PCIe Routing ID.
+The Routing ID consists of a bus, device and function or in the alternate
+form, a bus and function.
+The bus must be in the range of 0 to 255 inclusive and the device must be
+in the range of 0 to 31 inclusive.
+The function must be in the range of 0 to 7 inclusive if the standard form
+is used, and in the range of 0 to 255 inclusive if the alternate form is
+used.
+For example, if a bus, device and function are specified for the standard
+Routing ID form:
+.Pp
+.Dl sop,4,5,1
+.Pp
+If the alternate Routing ID form is used:
+.Pp
+.Dl sop,4,1
+.El
+.It Fl k Ar key
+Specify the Reservation Key.
+This may be in decimal, octal or hexadecimal format.
+The value is zero by default if not otherwise specified.
+The value must be between 0 and 2^64 - 1, inclusive.
+.It Fl K Ar key
+Specify the Service Action Reservation Key.
+This may be in decimal, octal or hexadecimal format.
+The value is zero by default if not otherwise specified.
+The value must be between 0 and 2^64 - 1, inclusive.
+.It Fl p
+Enable the Activate Persist Through Power Loss bit.
+This is only used for the register and register_ignore actions.
+This requests that the reservation persist across power loss events.
+.It Fl s Ar scope
+Specify the scope of the reservation.
+The scope may be specified by name or by number.
+The scope is ignored for register, register_ignore and clear.
+If the desired scope isn't available by name, you may specify the number.
+.Bl -tag -width 7n
+.It lun
+LUN scope (0x00).
+This encompasses the entire LUN.
+.It extent
+Extent scope (0x01).
+.It element
+Element scope (0x02).
+.El
+.It Fl R Ar rtp
+Specify the Relative Target Port.
+This only applies to the Register and Move service action of the Persistent
+Reserve Out command.
+.It Fl S
+Enable the SPEC_I_PT bit.
+This only applies to the Register service action of Persistent Reserve Out.
+You must also specify at least one Transport ID with
+.Fl I
+if this option is set.
+If you specify a Transport ID, this option is automatically set.
+It is an error to specify this option for any service action other than
+Register.
+.It Fl T Ar type
+Specify the reservation type.
+The reservation type may be specified by name or by number.
+If the desired reservation type isn't available by name, you may specify
+the number.
+Supported reservation type names:
+.Bl -tag -width 11n
+.It read_shared
+Read Shared mode.
+.It wr_ex
+Write Exclusive mode.
+May also be specified as
+.Dq write_exclusive .
+.It rd_ex
+Read Exclusive mode.
+May also be specified as
+.Dq read_exclusive .
+.It ex_ac
+Exclusive access mode.
+May also be specified as
+.Dq exclusive_access .
+.It wr_ex_ro
+Write Exclusive Registrants Only mode.
+May also be specified as
+.Dq write_exclusive_reg_only .
+.It ex_ac_ro
+Exclusive Access Registrants Only mode.
+May also be specified as
+.Dq exclusive_access_reg_only .
+.It wr_ex_ar
+Write Exclusive All Registrants mode.
+May also be specified as
+.Dq write_exclusive_all_regs .
+.It ex_ac_ar
+Exclusive Access All Registrants mode.
+May also be specified as
+.Dq exclusive_access_all_regs .
+.El
+.It Fl U
+Specify that the target should unregister the initiator that sent
+the Register and Move request.
+By default, the target will not unregister the initiator that sends the
+Register and Move request.
+This option only applies to the Register and Move service action of the
+Persistent Reserve Out command.
+.El
.It Ic help
Print out verbose usage information.
.El
@@ -1639,6 +1924,66 @@ power-on or hardware reset!
.Pp
.Em DO NOT
use this on a device which has an active filesystem!
+.Pp
+.Bd -literal -offset indent
+camcontrol persist da0 -v -i read_keys
+.Ed
+.Pp
+This will read any persistent reservation keys registered with da0, and
+display any errors encountered when sending the PERSISTENT RESERVE IN
+.Tn SCSI
+command.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -o register -a -K 0x12345678
+.Ed
+.Pp
+This will register the persistent reservation key 0x12345678 with da0,
+apply that registration to all ports on da0, and display any errors that
+occur when sending the PERSISTENT RESERVE OUT command.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -o reserve -s lun -k 0x12345678 -T ex_ac
+.Ed
+.Pp
+This will reserve da0 for the exlusive use of the initiator issuing the
+command.
+The scope of the reservation is the entire LUN.
+Any errors sending the PERSISTENT RESERVE OUT command will be displayed.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -i read_full
+.Ed
+.Pp
+This will display the full status of all reservations on da0 and print out
+status if there are any errors.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -o release -k 0x12345678 -T ex_ac
+.Ed
+.Pp
+This will release a reservation on da0 of the type ex_ac
+(Exclusive Access).
+The Reservation Key for this registration is 0x12345678.
+Any errors that occur will be displayed.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -o register -K 0x12345678 -S \e
+ -I sas,0x1234567812345678 -I sas,0x8765432187654321
+.Ed
+.Pp
+This will register the key 0x12345678 with da0, specifying that it applies
+to the SAS initiators with SAS addresses 0x1234567812345678 and
+0x8765432187654321.
+.Bd -literal -offset indent
+camcontrol persist da0 -v -o register_move -k 0x87654321 \e
+ -K 0x12345678 -U -p -R 2 -I fcp,0x1234567812345678
+.Ed
+.Pp
+This will move the registration from the current initiator, whose
+Registration Key is 0x87654321, to the Fibre Channel initiator with the
+Fiber Channel World Wide Node Name 0x1234567812345678.
+A new registration key, 0x12345678, will be registered for the initiator
+with the Fibre Channel World Wide Node Name 0x1234567812345678, and the
+current initiator will be unregistered from the target.
+The reservation will be moved to relative target port 2 on the target
+device.
+The registration will persist across power losses.
.Sh SEE ALSO
.Xr cam 3 ,
.Xr cam_cdbparse 3 ,
Modified: head/sbin/camcontrol/camcontrol.c
==============================================================================
--- head/sbin/camcontrol/camcontrol.c Thu Jul 3 22:25:59 2014 (r268239)
+++ head/sbin/camcontrol/camcontrol.c Thu Jul 3 23:09:44 2014 (r268240)
@@ -96,6 +96,7 @@ typedef enum {
CAM_CMD_SECURITY = 0x0000001d,
CAM_CMD_HPA = 0x0000001e,
CAM_CMD_SANITIZE = 0x0000001f,
+ CAM_CMD_PERSIST = 0x00000020
} cam_cmdmask;
typedef enum {
@@ -218,6 +219,7 @@ static struct camcontrol_opts option_tab
{"fwdownload", CAM_CMD_DOWNLOAD_FW, CAM_ARG_NONE, "f:ys"},
{"security", CAM_CMD_SECURITY, CAM_ARG_NONE, "d:e:fh:k:l:qs:T:U:y"},
{"hpa", CAM_CMD_HPA, CAM_ARG_NONE, "Pflp:qs:U:y"},
+ {"persist", CAM_CMD_PERSIST, CAM_ARG_NONE, "ai:I:k:K:o:ps:ST:U"},
#endif /* MINIMALISTIC */
{"help", CAM_CMD_USAGE, CAM_ARG_NONE, NULL},
{"-?", CAM_CMD_USAGE, CAM_ARG_NONE, NULL},
@@ -225,12 +227,6 @@ static struct camcontrol_opts option_tab
{NULL, 0, 0, NULL}
};
-typedef enum {
- CC_OR_NOT_FOUND,
- CC_OR_AMBIGUOUS,
- CC_OR_FOUND
-} camcontrol_optret;
-
struct cam_devitem {
struct device_match_result dev_match;
int num_periphs;
@@ -7826,6 +7822,9 @@ usage(int printlong)
" [-U <user|master>] [-y]\n"
" camcontrol hpa [dev_id][generic args] [-f] [-l] [-P] [-p pwd]\n"
" [-q] [-s max_sectors] [-U pwd] [-y]\n"
+" camcontrol persist [dev_id][generic args] <-i action|-o action>\n"
+" [-a][-I tid][-k key][-K sa_key][-p][-R rtp]\n"
+" [-s scope][-S][-T type][-U]\n"
#endif /* MINIMALISTIC */
" camcontrol help\n");
if (!printlong)
@@ -7862,8 +7861,9 @@ usage(int printlong)
"idle send the ATA IDLE command to the named device\n"
"standby send the ATA STANDBY command to the named device\n"
"sleep send the ATA SLEEP command to the named device\n"
-"fwdownload program firmware of the named device with the given image"
+"fwdownload program firmware of the named device with the given image\n"
"security report or send ATA security commands to the named device\n"
+"persist send the SCSI PERSISTENT RESERVE IN or OUT commands\n"
"help this message\n"
"Device Identifiers:\n"
"bus:target specify the bus and target, lun defaults to 0\n"
@@ -7998,6 +7998,22 @@ usage(int printlong)
" device\n"
"-U pwd unlock the HPA configuration of the device\n"
"-y don't ask any questions\n"
+"persist arguments:\n"
+"-i action specify read_keys, read_reservation, report_cap, or\n"
+" read_full_status\n"
+"-o action specify register, register_ignore, reserve, release,\n"
+" clear, preempt, preempt_abort, register_move, replace_lost\n"
+"-a set the All Target Ports (ALL_TG_PT) bit\n"
+"-I tid specify a Transport ID, e.g.: sas,0x1234567812345678\n"
+"-k key specify the Reservation Key\n"
+"-K sa_key specify the Service Action Reservation Key\n"
+"-p set the Activate Persist Through Power Loss bit\n"
+"-R rtp specify the Relative Target Port\n"
+"-s scope specify the scope: lun, extent, element or a number\n"
+"-S specify Transport ID for register, requires -I\n"
+"-T res_type specify the reservation type: read_shared, wr_ex, rd_ex,\n"
+" ex_ac, wr_ex_ro, ex_ac_ro, wr_ex_ar, ex_ac_ar\n"
+"-U unregister the current initiator for register_move\n"
);
#endif /* MINIMALISTIC */
}
@@ -8332,6 +8348,11 @@ main(int argc, char **argv)
error = scsisanitize(cam_dev, argc, argv,
combinedopt, retry_count, timeout);
break;
+ case CAM_CMD_PERSIST:
+ error = scsipersist(cam_dev, argc, argv, combinedopt,
+ retry_count, timeout, arglist & CAM_ARG_VERBOSE,
+ arglist & CAM_ARG_ERR_RECOVER);
+ break;
#endif /* MINIMALISTIC */
case CAM_CMD_USAGE:
usage(1);
Modified: head/sbin/camcontrol/camcontrol.h
==============================================================================
--- head/sbin/camcontrol/camcontrol.h Thu Jul 3 22:25:59 2014 (r268239)
+++ head/sbin/camcontrol/camcontrol.h Thu Jul 3 23:09:44 2014 (r268240)
@@ -30,6 +30,13 @@
#ifndef _CAMCONTROL_H
#define _CAMCONTROL_H
+
+typedef enum {
+ CC_OR_NOT_FOUND,
+ CC_OR_AMBIGUOUS,
+ CC_OR_FOUND
+} camcontrol_optret;
+
/*
* get_hook: Structure for evaluating args in a callback.
*/
@@ -56,6 +63,9 @@ void mode_list(struct cam_device *device
int retry_count, int timeout);
int scsidoinquiry(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout);
+int scsipersist(struct cam_device *device, int argc, char **argv,
+ char *combinedopt, int retry_count, int timeout, int verbose,
+ int err_recover);
char *cget(void *hook, char *name);
int iget(void *hook, char *name);
void arg_put(void *hook, int letter, void *arg, int count, char *name);
Added: head/sbin/camcontrol/persist.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sbin/camcontrol/persist.c Thu Jul 3 23:09:44 2014 (r268240)
@@ -0,0 +1,966 @@
+/*-
+ * Copyright (c) 2013 Spectra Logic Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * Authors: Ken Merry (Spectra Logic Corporation)
+ */
+/*
+ * SCSI Persistent Reservation support for camcontrol(8).
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/ioctl.h>
+#include <sys/stdint.h>
+#include <sys/types.h>
+#include <sys/endian.h>
+#include <sys/sbuf.h>
+#include <sys/queue.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <string.h>
+#include <strings.h>
+#include <fcntl.h>
+#include <ctype.h>
+#include <limits.h>
+#include <err.h>
+
+#include <cam/cam.h>
+#include <cam/cam_debug.h>
+#include <cam/cam_ccb.h>
+#include <cam/scsi/scsi_all.h>
+#include <cam/scsi/scsi_pass.h>
+#include <cam/scsi/scsi_message.h>
+#include <camlib.h>
+#include "camcontrol.h"
+
+struct persist_transport_id {
+ struct scsi_transportid_header *hdr;
+ unsigned int alloc_len;
+ STAILQ_ENTRY(persist_transport_id) links;
+};
+
+/*
+ * Service Actions for PERSISTENT RESERVE IN.
+ */
+static struct scsi_nv persist_in_actions[] = {
+ { "read_keys", SPRI_RK },
+ { "read_reservation", SPRI_RR },
+ { "report_capabilities", SPRI_RC },
+ { "read_full_status", SPRI_RS }
+};
+
+/*
+ * Service Actions for PERSISTENT RESERVE OUT.
+ */
+static struct scsi_nv persist_out_actions[] = {
+ { "register", SPRO_REGISTER },
+ { "reserve", SPRO_RESERVE },
+ { "release" , SPRO_RELEASE },
+ { "clear", SPRO_CLEAR },
+ { "preempt", SPRO_PREEMPT },
+ { "preempt_abort", SPRO_PRE_ABO },
+ { "register_ignore", SPRO_REG_IGNO },
+ { "register_move", SPRO_REG_MOVE },
+ { "replace_lost", SPRO_REPL_LOST_RES }
+};
+
+/*
+ * Known reservation scopes. As of SPC-4, only LU_SCOPE is used in the
+ * spec. The others are obsolete.
+ */
+static struct scsi_nv persist_scope_table[] = {
+ { "lun", SPR_LU_SCOPE },
+ { "extent", SPR_EXTENT_SCOPE },
+ { "element", SPR_ELEMENT_SCOPE }
+};
+
+/*
+ * Reservation types. The longer name for a given reservation type is
+ * listed first, so that it makes more sense when we print out the
+ * reservation type. We step through the table linearly when looking for
+ * the text name for a particular numeric reservation type value.
+ */
+static struct scsi_nv persist_type_table[] = {
+ { "read_shared", SPR_TYPE_RD_SHARED },
+ { "write_exclusive", SPR_TYPE_WR_EX },
+ { "wr_ex", SPR_TYPE_WR_EX },
+ { "read_exclusive", SPR_TYPE_RD_EX },
+ { "rd_ex", SPR_TYPE_RD_EX },
+ { "exclusive_access", SPR_TYPE_EX_AC },
+ { "ex_ac", SPR_TYPE_EX_AC },
+ { "write_exclusive_reg_only", SPR_TYPE_WR_EX_RO },
+ { "wr_ex_ro", SPR_TYPE_WR_EX_RO },
+ { "exclusive_access_reg_only", SPR_TYPE_EX_AC_RO },
+ { "ex_ac_ro", SPR_TYPE_EX_AC_RO },
+ { "write_exclusive_all_regs", SPR_TYPE_WR_EX_AR },
+ { "wr_ex_ar", SPR_TYPE_WR_EX_AR },
+ { "exclusive_access_all_regs", SPR_TYPE_EX_AC_AR },
+ { "ex_ac_ar", SPR_TYPE_EX_AC_AR }
+};
+
+/*
+ * Print out the standard scope/type field.
+ */
+static void
+persist_print_scopetype(uint8_t scopetype)
+{
+ const char *tmpstr;
+ int num_entries;
+
+ num_entries = sizeof(persist_scope_table) /
+ sizeof(persist_scope_table[0]);
+ tmpstr = scsi_nv_to_str(persist_scope_table, num_entries,
+ scopetype & SPR_SCOPE_MASK);
+ fprintf(stdout, "Scope: %s (%#x)\n", (tmpstr != NULL) ? tmpstr :
+ "Unknown", (scopetype & SPR_SCOPE_MASK) >> SPR_SCOPE_SHIFT);
+
+ num_entries = sizeof(persist_type_table) /
+ sizeof(persist_type_table[0]);
+ tmpstr = scsi_nv_to_str(persist_type_table, num_entries,
+ scopetype & SPR_TYPE_MASK);
+ fprintf(stdout, "Type: %s (%#x)\n", (tmpstr != NULL) ? tmpstr :
+ "Unknown", scopetype & SPR_TYPE_MASK);
+}
+
+static void
+persist_print_transportid(uint8_t *buf, uint32_t len)
+{
+ struct sbuf *sb;
+
+ sb = sbuf_new_auto();
+ if (sb == NULL)
+ fprintf(stderr, "Unable to allocate sbuf\n");
+
+ scsi_transportid_sbuf(sb, (struct scsi_transportid_header *)buf, len);
+
+ sbuf_finish(sb);
+
+ fprintf(stdout, "%s\n", sbuf_data(sb));
+
+ sbuf_delete(sb);
+}
+
+/*
+ * Print out a persistent reservation. This is used with the READ
+ * RESERVATION (0x01) service action of the PERSISTENT RESERVE IN command.
+ */
+static void
+persist_print_res(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
+{
+ uint32_t length;
+ struct scsi_per_res_in_rsrv *res;
+
+ length = scsi_4btoul(hdr->length);
+ length = MIN(length, valid_len);
+
+ res = (struct scsi_per_res_in_rsrv *)hdr;
+
+ if (length < sizeof(res->data) - sizeof(res->data.extent_length)) {
+ if (length == 0)
+ fprintf(stdout, "No reservations.\n");
+ else
+ warnx("unable to print reservation, only got %u "
+ "valid bytes", length);
+ return;
+ }
+ fprintf(stdout, "PRgeneration: %#x\n",
+ scsi_4btoul(res->header.generation));
+ fprintf(stdout, "Reservation Key: %#jx\n",
+ (uintmax_t)scsi_8btou64(res->data.reservation));
+ fprintf(stdout, "Scope address: %#x\n",
+ scsi_4btoul(res->data.scope_addr));
+
+ persist_print_scopetype(res->data.scopetype);
+
+ fprintf(stdout, "Extent length: %u\n",
+ scsi_2btoul(res->data.extent_length));
+}
+
+/*
+ * Print out persistent reservation keys. This is used with the READ KEYS
+ * service action of the PERSISTENT RESERVE IN command.
+ */
+static void
+persist_print_keys(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
+{
+ uint32_t length, num_keys, i;
+ struct scsi_per_res_key *key;
+
+ length = scsi_4btoul(hdr->length);
+ length = MIN(length, valid_len);
+
+ num_keys = length / sizeof(*key);
+
+ fprintf(stdout, "PRgeneration: %#x\n", scsi_4btoul(hdr->generation));
+ fprintf(stdout, "%u key%s%s\n", num_keys, (num_keys == 1) ? "" : "s",
+ (num_keys == 0) ? "." : ":");
+
+ for (i = 0, key = (struct scsi_per_res_key *)&hdr[1]; i < num_keys;
+ i++, key++) {
+ fprintf(stdout, "%u: %#jx\n", i,
+ (uintmax_t)scsi_8btou64(key->key));
+ }
+}
+
+/*
+ * Print out persistent reservation capabilities. This is used with the
+ * REPORT CAPABILITIES service action of the PERSISTENT RESERVE IN command.
+ */
+static void
+persist_print_cap(struct scsi_per_res_cap *cap, uint32_t valid_len)
+{
+ uint32_t length;
+ int check_type_mask = 0;
+
+ length = scsi_2btoul(cap->length);
+ length = MIN(length, valid_len);
+
+ if (length < __offsetof(struct scsi_per_res_cap, type_mask)) {
+ fprintf(stdout, "Insufficient data (%u bytes) to report "
+ "full capabilities\n", length);
+ return;
+ }
+ if (length >= __offsetof(struct scsi_per_res_cap, reserved))
+ check_type_mask = 1;
+
+ fprintf(stdout, "Replace Lost Reservation Capable (RLR_C): %d\n",
+ (cap->flags1 & SPRI_RLR_C) ? 1 : 0);
+ fprintf(stdout, "Compatible Reservation Handling (CRH): %d\n",
+ (cap->flags1 & SPRI_CRH) ? 1 : 0);
+ fprintf(stdout, "Specify Initiator Ports Capable (SIP_C): %d\n",
+ (cap->flags1 & SPRI_SIP_C) ? 1 : 0);
+ fprintf(stdout, "All Target Ports Capable (ATP_C): %d\n",
+ (cap->flags1 & SPRI_ATP_C) ? 1 : 0);
+ fprintf(stdout, "Persist Through Power Loss Capable (PTPL_C): %d\n",
+ (cap->flags1 & SPRI_PTPL_C) ? 1 : 0);
+ fprintf(stdout, "ALLOW COMMANDS field: (%#x)\n",
+ (cap->flags2 & SPRI_ALLOW_CMD_MASK) >> SPRI_ALLOW_CMD_SHIFT);
+ /*
+ * These cases are cut-and-pasted from SPC4r36l. There is no
+ * succinct way to describe these otherwise, and even with the
+ * verbose description, the user will probably have to refer to
+ * the spec to fully understand what is going on.
+ */
+ switch (cap->flags2 & SPRI_ALLOW_CMD_MASK) {
+ case SPRI_ALLOW_1:
+ fprintf(stdout,
+" The device server allows the TEST UNIT READY command through Write\n"
+" Exclusive type reservations and Exclusive Access type reservations\n"
+" and does not provide information about whether the following commands\n"
+" are allowed through Write Exclusive type reservations:\n"
+" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
+" command, RECEIVE COPY RESULTS command, RECEIVE DIAGNOSTIC\n"
+" RESULTS command, REPORT SUPPORTED OPERATION CODES command,\n"
+" and REPORT SUPPORTED TASK MANAGEMENT FUNCTION command; and\n"
+" b) the READ DEFECT DATA command (see SBC-3).\n");
+ break;
+ case SPRI_ALLOW_2:
+ fprintf(stdout,
+" The device server allows the TEST UNIT READY command through Write\n"
+" Exclusive type reservations and Exclusive Access type reservations\n"
+" and does not allow the following commands through Write Exclusive type\n"
+" reservations:\n"
+" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
+" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
+" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
+" FUNCTION command; and\n"
+" b) the READ DEFECT DATA command.\n"
+" The device server does not allow the RECEIVE COPY RESULTS command\n"
+" through Write Exclusive type reservations or Exclusive Access type\n"
+" reservations.\n");
+ break;
+ case SPRI_ALLOW_3:
+ fprintf(stdout,
+" The device server allows the TEST UNIT READY command through Write\n"
+" Exclusive type reservations and Exclusive Access type reservations\n"
+" and allows the following commands through Write Exclusive type\n"
+" reservations:\n"
+" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
+" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
+" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
+" FUNCTION command; and\n"
+" b) the READ DEFECT DATA command.\n"
+" The device server does not allow the RECEIVE COPY RESULTS command\n"
+" through Write Exclusive type reservations or Exclusive Access type\n"
+" reservations.\n");
+ break;
+ case SPRI_ALLOW_4:
+ fprintf(stdout,
+" The device server allows the TEST UNIT READY command and the RECEIVE\n"
+" COPY RESULTS command through Write Exclusive type reservations and\n"
+" Exclusive Access type reservations and allows the following commands\n"
+" through Write Exclusive type reservations:\n"
+" a) the MODE SENSE command, READ ATTRIBUTE command, READ BUFFER\n"
+" command, RECEIVE DIAGNOSTIC RESULTS command, REPORT SUPPORTED\n"
+" OPERATION CODES command, and REPORT SUPPORTED TASK MANAGEMENT\n"
+" FUNCTION command; and\n"
+" b) the READ DEFECT DATA command.\n");
+ break;
+ case SPRI_ALLOW_NA:
+ fprintf(stdout,
+" No information is provided about whether certain commands are allowed\n"
+" through certain types of persistent reservations.\n");
+ break;
+ default:
+ fprintf(stdout,
+" Unknown ALLOW COMMANDS value %#x\n",
+ (cap->flags2 & SPRI_ALLOW_CMD_MASK) >>
+ SPRI_ALLOW_CMD_SHIFT);
+ break;
+ }
+ fprintf(stdout, "Persist Through Power Loss Activated (PTPL_A): %d\n",
+ (cap->flags2 & SPRI_PTPL_A) ? 1 : 0);
+ if ((check_type_mask != 0)
+ && (cap->flags2 & SPRI_TMV)) {
+ fprintf(stdout, "Supported Persistent Reservation Types:\n");
+ fprintf(stdout, " Write Exclusive - All Registrants "
+ "(WR_EX_AR): %d\n",
+ (cap->type_mask[0] & SPRI_TM_WR_EX_AR)? 1 : 0);
+ fprintf(stdout, " Exclusive Access - Registrants Only "
+ "(EX_AC_RO): %d\n",
+ (cap->type_mask[0] & SPRI_TM_EX_AC_RO) ? 1 : 0);
+ fprintf(stdout, " Write Exclusive - Registrants Only "
+ "(WR_EX_RO): %d\n",
+ (cap->type_mask[0] & SPRI_TM_WR_EX_RO)? 1 : 0);
+ fprintf(stdout, " Exclusive Access (EX_AC): %d\n",
+ (cap->type_mask[0] & SPRI_TM_EX_AC) ? 1 : 0);
+ fprintf(stdout, " Write Exclusive (WR_EX): %d\n",
+ (cap->type_mask[0] & SPRI_TM_WR_EX) ? 1 : 0);
+ fprintf(stdout, " Exclusive Access - All Registrants "
+ "(EX_AC_AR): %d\n",
+ (cap->type_mask[1] & SPRI_TM_EX_AC_AR) ? 1 : 0);
+ } else {
+ fprintf(stdout, "Persistent Reservation Type Mask is NOT "
+ "valid\n");
+ }
+
+
+}
+
+static void
+persist_print_full(struct scsi_per_res_in_header *hdr, uint32_t valid_len)
+{
+ uint32_t length, len_to_go = 0;
+ struct scsi_per_res_in_full_desc *desc;
+ uint8_t *cur_pos;
+ int i;
+
+ length = scsi_4btoul(hdr->length);
+ length = MIN(length, valid_len);
+
+ if (length < sizeof(*desc)) {
+ if (length == 0)
+ fprintf(stdout, "No reservations.\n");
+ else
+ warnx("unable to print reservation, only got %u "
+ "valid bytes", length);
+ return;
+ }
+
+ fprintf(stdout, "PRgeneration: %#x\n", scsi_4btoul(hdr->generation));
+ cur_pos = (uint8_t *)&hdr[1];
+ for (len_to_go = length, i = 0,
+ desc = (struct scsi_per_res_in_full_desc *)cur_pos;
+ len_to_go >= sizeof(*desc);
+ desc = (struct scsi_per_res_in_full_desc *)cur_pos, i++) {
+ uint32_t additional_length, cur_length;
+
+
+ fprintf(stdout, "Reservation Key: %#jx\n",
+ (uintmax_t)scsi_8btou64(desc->res_key.key));
+ fprintf(stdout, "All Target Ports (ALL_TG_PT): %d\n",
+ (desc->flags & SPRI_FULL_ALL_TG_PT) ? 1 : 0);
+ fprintf(stdout, "Reservation Holder (R_HOLDER): %d\n",
+ (desc->flags & SPRI_FULL_R_HOLDER) ? 1 : 0);
+
+ if (desc->flags & SPRI_FULL_R_HOLDER)
+ persist_print_scopetype(desc->scopetype);
+
+ if ((desc->flags & SPRI_FULL_ALL_TG_PT) == 0)
+ fprintf(stdout, "Relative Target Port ID: %#x\n",
+ scsi_2btoul(desc->rel_trgt_port_id));
+
+ additional_length = scsi_4btoul(desc->additional_length);
+
+ persist_print_transportid(desc->transport_id,
+ additional_length);
+
+ cur_length = sizeof(*desc) + additional_length;
+ len_to_go -= cur_length;
+ cur_pos += cur_length;
+ }
+}
+
+int
+scsipersist(struct cam_device *device, int argc, char **argv, char *combinedopt,
+ int retry_count, int timeout, int verbosemode, int err_recover)
+{
+ union ccb *ccb = NULL;
+ int c, in = 0, out = 0;
+ int action = -1, num_ids = 0;
+ int error = 0;
+ uint32_t res_len = 0;
+ unsigned long rel_tgt_port = 0;
+ uint8_t *res_buf = NULL;
+ int scope = SPR_LU_SCOPE, res_type = 0, key_set = 0, sa_key_set = 0;
+ struct persist_transport_id *id, *id2;
+ STAILQ_HEAD(, persist_transport_id) transport_id_list;
+ uint64_t key = 0, sa_key = 0;
+ struct scsi_nv *table = NULL;
+ size_t table_size = 0, id_len = 0;
+ uint32_t valid_len = 0;
+ int all_tg_pt = 0, aptpl = 0, spec_i_pt = 0, unreg = 0,rel_port_set = 0;
+
+ STAILQ_INIT(&transport_id_list);
+
+ ccb = cam_getccb(device);
+ if (ccb == NULL) {
+ warnx("%s: error allocating CCB", __func__);
+ error = 1;
+ goto bailout;
+ }
+
+ bzero(&(&ccb->ccb_h)[1],
+ sizeof(union ccb) - sizeof(struct ccb_hdr));
+
+ while ((c = getopt(argc, argv, combinedopt)) != -1) {
+ switch (c) {
+ case 'a':
+ all_tg_pt = 1;
+ break;
+ case 'I': {
+ int error_str_len = 128;
+ char error_str[error_str_len];
+ char *id_str;
+
+ id = malloc(sizeof(*id));
+ if (id == NULL) {
+ warnx("%s: error allocating %zu bytes",
+ __func__, sizeof(*id));
+ error = 1;
+ goto bailout;
+ }
+ bzero(id, sizeof(*id));
+
+ id_str = strdup(optarg);
+ if (id_str == NULL) {
+ warnx("%s: error duplicating string %s",
+ __func__, optarg);
+ free(id);
+ error = 1;
+ goto bailout;
+ }
+ error = scsi_parse_transportid(id_str, &id->hdr,
+ &id->alloc_len, error_str, error_str_len);
+ if (error != 0) {
+ warnx("%s", error_str);
+ error = 1;
+ free(id);
+ free(id_str);
+ goto bailout;
+ }
+ free(id_str);
+
+ STAILQ_INSERT_TAIL(&transport_id_list, id, links);
+ num_ids++;
+ id_len += id->alloc_len;
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-head
mailing list