svn commit: r251499 - head/sys/dev/usb/controller

Hans Petter Selasky hselasky at FreeBSD.org
Fri Jun 7 14:30:08 UTC 2013


Author: hselasky
Date: Fri Jun  7 14:30:06 2013
New Revision: 251499
URL: http://svnweb.freebsd.org/changeset/base/251499

Log:
  Add support for polling the XHCI interrupt handler when
  the regular interrupt handler is not working properly or
  in case of MSI interrupts which are not yet supported.
  Remove interrupt setup code for FreeBSD versions older
  than 700031.
  
  MFC after:	1 week
  PR:		usb/179342

Modified:
  head/sys/dev/usb/controller/xhci.c
  head/sys/dev/usb/controller/xhci.h
  head/sys/dev/usb/controller/xhci_pci.c

Modified: head/sys/dev/usb/controller/xhci.c
==============================================================================
--- head/sys/dev/usb/controller/xhci.c	Fri Jun  7 14:23:11 2013	(r251498)
+++ head/sys/dev/usb/controller/xhci.c	Fri Jun  7 14:30:06 2013	(r251499)
@@ -90,6 +90,7 @@
 #ifdef USB_DEBUG
 static int xhcidebug;
 static int xhciroute;
+static int xhcipolling;
 
 static SYSCTL_NODE(_hw_usb, OID_AUTO, xhci, CTLFLAG_RW, 0, "USB XHCI");
 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, debug, CTLFLAG_RW | CTLFLAG_TUN,
@@ -98,6 +99,9 @@ TUNABLE_INT("hw.usb.xhci.debug", &xhcide
 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, xhci_port_route, CTLFLAG_RW | CTLFLAG_TUN,
     &xhciroute, 0, "Routing bitmap for switching EHCI ports to XHCI controller");
 TUNABLE_INT("hw.usb.xhci.xhci_port_route", &xhciroute);
+SYSCTL_INT(_hw_usb_xhci, OID_AUTO, use_polling, CTLFLAG_RW | CTLFLAG_TUN,
+    &xhcipolling, 0, "Set to enable software interrupt polling for XHCI controller");
+TUNABLE_INT("hw.usb.xhci.use_polling", &xhcipolling);
 #endif
 
 #define	XHCI_INTR_ENDPT 1
@@ -194,6 +198,16 @@ xhci_get_port_route(void)
 #endif
 }
 
+uint8_t
+xhci_use_polling(void)
+{
+#ifdef USB_DEBUG
+	return (xhcipolling != 0);
+#else
+	return (0);
+#endif
+}
+
 static void
 xhci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb)
 {

Modified: head/sys/dev/usb/controller/xhci.h
==============================================================================
--- head/sys/dev/usb/controller/xhci.h	Fri Jun  7 14:23:11 2013	(r251498)
+++ head/sys/dev/usb/controller/xhci.h	Fri Jun  7 14:30:06 2013	(r251499)
@@ -438,6 +438,8 @@ struct xhci_softc {
 	/* configure message */
 	struct usb_bus_msg	sc_config_msg[2];
 
+	struct usb_callout	sc_callout;
+
 	union xhci_hub_desc	sc_hub_desc;
 
 	struct cv		sc_cmd_cv;
@@ -500,6 +502,7 @@ struct xhci_softc {
 /* prototypes */
 
 uint32_t	xhci_get_port_route(void);
+uint8_t 	xhci_use_polling(void);
 usb_error_t xhci_halt_controller(struct xhci_softc *);
 usb_error_t xhci_init(struct xhci_softc *, device_t);
 usb_error_t xhci_start_controller(struct xhci_softc *);

Modified: head/sys/dev/usb/controller/xhci_pci.c
==============================================================================
--- head/sys/dev/usb/controller/xhci_pci.c	Fri Jun  7 14:23:11 2013	(r251498)
+++ head/sys/dev/usb/controller/xhci_pci.c	Fri Jun  7 14:30:06 2013	(r251499)
@@ -132,6 +132,16 @@ xhci_pci_probe(device_t self)
 	}
 }
 
+static void
+xhci_interrupt_poll(void *_sc)
+{
+	struct xhci_softc *sc = _sc;
+	USB_BUS_UNLOCK(&sc->sc_bus);
+	xhci_interrupt(sc);
+	USB_BUS_LOCK(&sc->sc_bus);
+	usb_callout_reset(&sc->sc_callout, 1, (void *)&xhci_interrupt_poll, sc);
+}
+
 static int
 xhci_pci_attach(device_t self)
 {
@@ -159,12 +169,13 @@ xhci_pci_attach(device_t self)
 	sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
 	sc->sc_io_size = rman_get_size(sc->sc_io_res);
 
+	usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
+
 	rid = 0;
 	sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
 	    RF_SHAREABLE | RF_ACTIVE);
 	if (sc->sc_irq_res == NULL) {
 		device_printf(self, "Could not allocate IRQ\n");
-		goto error;
 	}
 	sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
 	if (sc->sc_bus.bdev == NULL) {
@@ -175,18 +186,22 @@ xhci_pci_attach(device_t self)
 
 	sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
 
-#if (__FreeBSD_version >= 700031)
-	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
-#else
-	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
-	    (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
-#endif
-	if (err) {
-		device_printf(self, "Could not setup IRQ, err=%d\n", err);
-		sc->sc_intr_hdl = NULL;
-		goto error;
+	if (sc->sc_irq_res != NULL) {
+		err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
+		    NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
+		if (err != 0) {
+			device_printf(self, "Could not setup IRQ, err=%d\n", err);
+			sc->sc_intr_hdl = NULL;
+		}
 	}
+	if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL ||
+	    xhci_use_polling() != 0) {
+		device_printf(self, "Interrupt polling at %dHz\n", hz);
+		USB_BUS_LOCK(&sc->sc_bus);
+		xhci_interrupt_poll(sc);
+		USB_BUS_UNLOCK(&sc->sc_bus);
+	}
+
 	xhci_pci_take_controller(self);
 
 	err = xhci_halt_controller(sc);
@@ -222,12 +237,14 @@ xhci_pci_detach(device_t self)
 	/* during module unload there are lots of children leftover */
 	device_delete_children(self);
 
+	if (sc->sc_io_res) {
+		usb_callout_drain(&sc->sc_callout);
+		xhci_halt_controller(sc);
+	}
+
 	pci_disable_busmaster(self);
 
 	if (sc->sc_irq_res && sc->sc_intr_hdl) {
-
-		xhci_halt_controller(sc);
-
 		bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
 		sc->sc_intr_hdl = NULL;
 	}


More information about the svn-src-head mailing list