svn commit: r245955 - in head/sys: arm/conf boot/fdt/dts
Ian Lepore
ian at FreeBSD.org
Sun Jan 27 01:17:38 UTC 2013
Author: ian
Date: Sun Jan 27 01:17:37 2013
New Revision: 245955
URL: http://svnweb.freebsd.org/changeset/base/245955
Log:
Add support for the GlobalScale Technologies DreamPlug computer.
This adds support for version 10, revision 01, but it should also work
without changes for the 0901 model, at least until we get drivers for the
two different wifi chips involved.
Many users contributed to and tested the various patchsets floating around
for the past year that have eventually evolved into this checkin, most notably
Richard Neese who provided the bulk of the kernel config file.
Approved by: cognet (mentor)
Added:
head/sys/arm/conf/DREAMPLUG-1001 (contents, props changed)
head/sys/boot/fdt/dts/dreamplug-1001.dts (contents, props changed)
head/sys/boot/fdt/dts/dreamplug-1001N.dts (contents, props changed)
Added: head/sys/arm/conf/DREAMPLUG-1001
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/conf/DREAMPLUG-1001 Sun Jan 27 01:17:37 2013 (r245955)
@@ -0,0 +1,183 @@
+# Kernel config for GlobalScale Technologies DreamPlug version 1001.
+#
+# This is for units that are version 10, revision 01, with NOR SPI flash.
+# These units are identified with the number "1001" on the S/N label.
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+#
+
+ident DREAMPLUG-1001
+
+include "../mv/kirkwood/std.db88f6xxx"
+
+makeoptions FDT_DTS_FILE=dreamplug-1001.dts
+
+makeoptions MODULES_OVERRIDE=""
+
+options SOC_MV_KIRKWOOD
+
+options SCHED_4BSD #4BSD scheduler
+options INET #InterNETworking
+options INET6 #IPv6 communications protocols
+options SOFTUPDATES
+options CD9660 #ISO 9660 filesystem
+options FFS #Berkeley Fast Filesystem
+options MSDOSFS #MS DOS File System (FAT, FAT32)
+options NULLFS #NULL filesystem
+options TMPFS #Efficient memory filesystem
+options SYSVSHM #SYSV-style shared memory
+options SYSVMSG #SYSV-style message queues
+options SYSVSEM #SYSV-style semaphores
+options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+options GEOM_ELI # Disk encryption.
+options GEOM_LABEL # Providers labelization.
+options GEOM_PART_GPT # GPT partitioning
+
+# Flattened Device Tree
+device fdt
+options FDT
+options FDT_DTB_STATIC
+
+# Misc pseudo devices
+device bpf #Required for DHCP
+device faith #IPv6-to-IPv4 relaying (translation)
+device firmware #firmware(9) required for USB wlan
+device gif #IPv6 and IPv4 tunneling
+device loop #Network loopback
+device md #Memory/malloc disk
+device pty #BSD-style compatibility pseudo ttys
+device random #Entropy device
+device tun #Packet tunnel.
+device ether #Required for all ethernet devices
+device vlan #802.1Q VLAN support
+device wlan #802.11 WLAN support
+
+# cam support for umass and ahci
+device scbus
+device pass
+device da
+device cd
+
+# Serial ports
+device uart
+
+# Networking
+device mge # Marvell Gigabit Ethernet controller
+device mii
+device e1000phy
+
+# USB
+options USB_HOST_ALIGN=32 # Align DMA to cacheline
+#options USB_DEBUG # Compile in USB debug support
+device usb # Basic usb support
+device ehci # USB host controller
+device umass # Mass storage
+device uhid # Human-interface devices
+device rum # Ralink Technology RT2501USB wireless NICs
+device uath # Atheros AR5523 wireless NICs
+device ural # Ralink Technology RT2500USB wireless NICs
+device zyd # ZyDAS zb1211/zb1211b wireless NICs
+device urtw # Realtek RTL8187B/L USB
+device upgt # Conexant/Intersil PrismGT SoftMAC USB
+device u3g # USB-based 3G modems (Option, Huawei, Sierra)
+
+# I2C (TWSI)
+device iic
+device iicbus
+
+# SATA
+device mvs
+device ahci
+
+# Sound
+device sound
+device snd_uaudio
+
+#crypto
+device cesa # Marvell security engine
+device crypto
+device cryptodev
+
+# IPSec
+device enc
+options IPSEC
+options IPSEC_NAT_T
+options TCP_SIGNATURE #include support for RFC 2385
+
+# IPFW
+options IPFIREWALL
+options IPFIREWALL_DEFAULT_TO_ACCEPT
+options IPFIREWALL_VERBOSE
+options IPFIREWALL_VERBOSE_LIMIT=100
+options IPFIREWALL_NAT
+options LIBALIAS
+options DUMMYNET
+options IPDIVERT
+
+#PF
+device pf
+device pflog
+device pfsync
+
+# ALTQ, required for PF
+options ALTQ # Basic ALTQ support
+options ALTQ_CBQ # Class Based Queueing
+options ALTQ_RED # Random Early Detection
+options ALTQ_RIO # RED In/Out
+options ALTQ_HFSC # Hierarchical Packet Scheduler
+options ALTQ_CDNR # Traffic conditioner
+options ALTQ_PRIQ # Priority Queueing
+options ALTQ_NOPCC # Required if the TSC is unusable
+#options ALTQ_DEBUG
+
+# Debugging
+makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
+options BREAK_TO_DEBUGGER
+options ALT_BREAK_TO_DEBUGGER
+options DDB
+options KDB
+options DIAGNOSTIC
+options INVARIANTS #Enable calls of extra sanity checking
+options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
+#options WITNESS #Enable checks to detect deadlocks and cycles
+#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
+#options WITNESS_KDB
+
+# Enable these options for nfs root configured via BOOTP.
+options NFSCL #Network Filesystem Client
+options NFSLOCKD #Network Lock Manager
+#options NFS_ROOT #NFS usable as /, requires NFSCLIENT
+#options BOOTP
+#options BOOTP_NFSROOT
+#options BOOTP_NFSV3
+#options BOOTP_WIRED_TO=mge0
+
+# If not using BOOTP, use something like one of these...
+#options ROOTDEVNAME=\"ufs:/dev/da1a\"
+options ROOTDEVNAME=\"ufs:/dev/da1s1a\"
+#options ROOTDEVNAME=\"ufs:/dev/da1p10\"
+#options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\"
+
+# To use this configuration with the (rare) model 1001N (nand flash),
+# create a kernel config file that looks like this:
+#
+# include DREAMPLUG-1001
+# nomakeoptions FDT_DTS_FILE
+# makeoptions FDT_DTS_FILE=dreamplug-1001N.dts
+# device nand
+
Added: head/sys/boot/fdt/dts/dreamplug-1001.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/dreamplug-1001.dts Sun Jan 27 01:17:37 2013 (r245955)
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2013 Ian Lepore
+ * Copyright (c) 2010 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software substantially based on work developed by Semihalf
+ * under sponsorship from the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * GlobalScale Technologies DreamPlug Device Tree Source.
+ *
+ * This source is for version 10 revision 01 units with NOR SPI flash.
+ * These units are marked "1001" on the serial number label.
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GlobalScale Technologies Dreamplug v1001";
+ compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ mpp = &MPP;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ soc = &SOC;
+ sram = &SRAM;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "ARM,88FR131";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>; // 512M at 0x0
+ };
+
+ localbus at 0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "mrvl,lbc";
+ bank-count = <1>;
+
+ /* This reflects CPU decode windows setup. */
+ ranges = <0x0 0x1e 0xfa000000 0x00100000>;
+
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x00100000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+ };
+
+ SOC: soc88f6281 at f1000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0xf1000000 0x00100000>;
+ bus-frequency = <0>;
+
+ PIC: pic at 20200 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x3c>;
+ compatible = "mrvl,pic";
+ };
+
+ timer at 20300 {
+ compatible = "mrvl,timer";
+ reg = <0x20300 0x30>;
+ interrupts = <1>;
+ interrupt-parent = <&PIC>;
+ mrvl,has-wdt;
+ };
+
+ MPP: mpp at 10000 {
+ #pin-cells = <2>;
+ compatible = "mrvl,mpp";
+ reg = <0x10000 0x34>;
+ pin-count = <50>;
+ pin-map = <
+ 0 2 /* MPP[ 0]: SPI_SCn */
+ 1 2 /* MPP[ 1]: SPI_MOSI */
+ 2 2 /* MPP[ 2]: SPI_SCK */
+ 3 2 /* MPP[ 3]: SPI_MISO */
+ 4 1 /* MPP[ 4]: NF_IO[6] */
+ 5 1 /* MPP[ 5]: NF_IO[7] */
+ 6 1 /* MPP[ 6]: SYSRST_OUTn */
+ 7 0 /* MPP[ 7]: GPO[7] */
+ 8 1 /* MPP[ 8]: TW_SDA */
+ 9 1 /* MPP[ 9]: TW_SCK */
+ 10 3 /* MPP[10]: UA0_TXD */
+ 11 3 /* MPP[11]: US0_RXD */
+ 12 1 /* MPP[12]: SD_CLK */
+ 13 1 /* MPP[13]: SD_CMD */
+ 14 1 /* MPP[14]: SD_D[0] */
+ 15 1 /* MPP[15]: SD_D[1] */
+ 16 1 /* MPP[16]: SD_D[2] */
+ 17 1 /* MPP[17]: SD_D[3] */
+ 18 1 /* MPP[18]: NF_IO[0] */
+ 19 1 /* MPP[19]: NF_IO[1] */
+ 20 3 /* MPP[20]: GE1[ 0] */
+ 21 3 /* MPP[21]: GE1[ 1] */
+ 22 3 /* MPP[22]: GE1[ 2] */
+ 23 3 /* MPP[23]: GE1[ 3] */
+ 24 3 /* MPP[24]: GE1[ 4] */
+ 25 3 /* MPP[25]: GE1[ 5] */
+ 26 3 /* MPP[26]: GE1[ 6] */
+ 27 3 /* MPP[27]: GE1[ 7] */
+ 28 3 /* MPP[28]: GE1[ 8] */
+ 29 3 /* MPP[29]: GE1[ 9] */
+ 30 3 /* MPP[30]: GE1[10] */
+ 31 3 /* MPP[31]: GE1[11] */
+ 32 3 /* MPP[32]: GE1[12] */
+ 33 3 /* MPP[33]: GE1[13] */
+ 34 3 /* MPP[34]: GE1[14] */
+ 35 3 /* MPP[35]: GE1[15] */
+ 36 0 /* MPP[36]: GPIO[36] */
+ 37 0 /* MPP[37]: GPIO[37] */
+ 38 0 /* MPP[38]: GPIO[38] */
+ 39 0 /* MPP[39]: GPIO[39] */
+ 40 2 /* MPP[40]: TDM_SPI_SCK */
+ 41 2 /* MPP[41]: TDM_SPI_MISO */
+ 42 2 /* MPP[42]: TDM_SPI_MOSI */
+ 43 0 /* MPP[43]: GPIO[43] */
+ 44 0 /* MPP[44]: GPIO[44] */
+ 45 0 /* MPP[45]: GPIO[45] */
+ 46 0 /* MPP[46]: GPIO[46] */
+ 47 0 /* MPP[47]: GPIO[47] */
+ 48 0 /* MPP[48]: GPIO[48] */
+ 49 0 /* MPP[49]: GPIO[49] */
+ >;
+ };
+
+ GPIO: gpio at 10100 {
+ #gpio-cells = <3>;
+ compatible = "mrvl,gpio";
+ reg = <0x10100 0x20>;
+ gpio-controller;
+ interrupts = <35 36 37 38 39 40 41>;
+ interrupt-parent = <&PIC>;
+ pin-count = <50>;
+ };
+
+ gpioled at 0 {
+ compatible = "mrvl,gpioled";
+
+ gpios = <&GPIO 47 2 0 /* GPIO[47] BT LED: OUT */
+ &GPIO 48 2 0 /* GPIO[48] WLAN LED: OUT */
+ &GPIO 49 2 0>; /* GPIO[49] WLAN AP LED: OUT */
+ };
+
+ rtc at 10300 {
+ compatible = "mrvl,rtc";
+ reg = <0x10300 0x08>;
+ };
+
+ twsi at 11000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,twsi";
+ reg = <0x11000 0x20>;
+ interrupts = <43>;
+ interrupt-parent = <&PIC>;
+ };
+
+ enet0: ethernet at 72000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x72000 0x2000>;
+ ranges = <0x0 0x72000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <12 13 14 11 46>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+
+ mdio at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,mdio";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ };
+ };
+ };
+
+ enet1: ethernet at 76000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x76000 0x02000>;
+ ranges = <0x0 0x76000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <16 17 18 15 47>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ };
+
+ serial0: serial at 12000 {
+ compatible = "ns16550";
+ reg = <0x12000 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ };
+
+ serial1: serial at 12100 {
+ compatible = "ns16550";
+ reg = <0x12100 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <34>;
+ interrupt-parent = <&PIC>;
+ };
+
+ crypto at 30000 {
+ compatible = "mrvl,cesa";
+ reg = <0x30000 0x10000>;
+ interrupts = <22>;
+ interrupt-parent = <&PIC>;
+
+ sram-handle = <&SRAM>;
+ };
+
+ usb at 50000 {
+ compatible = "mrvl,usb-ehci", "usb-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <48 19>;
+ interrupt-parent = <&PIC>;
+ };
+
+ xor at 60000 {
+ compatible = "mrvl,xor";
+ reg = <0x60000 0x1000>;
+ interrupts = <5 6 7 8>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sata at 80000 {
+ compatible = "mrvl,sata";
+ reg = <0x80000 0x6000>;
+ interrupts = <21>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sdio at 90000 {
+ compatible = "mrvl,sdio";
+ reg = <0x90000 0x134>;
+ interrupts = <28>;
+ interrupt-parent = <&PIC>;
+ };
+ };
+
+ SRAM: sram at fd000000 {
+ compatible = "mrvl,cesa-sram";
+ reg = <0xfd000000 0x00100000>;
+ };
+
+ chosen {
+ stdin = "serial0";
+ stdout = "serial0";
+ };
+
+};
Added: head/sys/boot/fdt/dts/dreamplug-1001N.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/dreamplug-1001N.dts Sun Jan 27 01:17:37 2013 (r245955)
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2013 Ian Lepore
+ * Copyright (c) 2010 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software substantially based on work developed by Semihalf
+ * under sponsorship from the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * GlobalScale Technologies DreamPlug Device Tree Source.
+ *
+ * This source is for version 10 revision 01 units with NAND flash.
+ * These units are marked "1001N" on the serial number label.
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GlobalScale Technologies Dreamplug v1001N";
+ compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ mpp = &MPP;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ soc = &SOC;
+ sram = &SRAM;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "ARM,88FR131";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>; // 512M at 0x0
+ };
+
+ localbus at 0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "mrvl,lbc";
+ bank-count = <1>;
+
+ /* This reflects CPU decode windows setup. */
+ ranges = <0x0 0x2f 0xf9300000 0x00100000>;
+
+ nand at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mrvl,nfc";
+ reg = <0x0 0x0 0x00100000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ // Slice info reported by builtin linux when it boots...
+ //[ 11.161328] 0x00000000-0x00100000 : "u-boot"
+ //[ 11.167431] 0x00100000-0x00500000 : "uImage"
+ //[ 11.173471] 0x00500000-0x20000000 : "root"
+
+ slice at 0 {
+ reg = <0x0 0x100000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ slice at 200000 {
+ reg = <0x100000 0x40000>;
+ label = "uImage";
+ };
+
+ slice at 500000 {
+ reg = <0x500000 0x1FB00000>;
+ label = "root";
+ };
+ };
+ };
+
+ SOC: soc88f6281 at f1000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0xf1000000 0x00100000>;
+ bus-frequency = <0>;
+
+ PIC: pic at 20200 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x3c>;
+ compatible = "mrvl,pic";
+ };
+
+ timer at 20300 {
+ compatible = "mrvl,timer";
+ reg = <0x20300 0x30>;
+ interrupts = <1>;
+ interrupt-parent = <&PIC>;
+ mrvl,has-wdt;
+ };
+
+ MPP: mpp at 10000 {
+ #pin-cells = <2>;
+ compatible = "mrvl,mpp";
+ reg = <0x10000 0x34>;
+ pin-count = <50>;
+ pin-map = <
+ 0 1 /* MPP[ 0]: NF_IO[2] */
+ 1 1 /* MPP[ 1]: NF_IO[3] */
+ 2 1 /* MPP[ 2]: NF_IO[4] */
+ 3 1 /* MPP[ 3]: NF_IO[5] */
+ 4 1 /* MPP[ 4]: NF_IO[6] */
+ 5 1 /* MPP[ 5]: NF_IO[7] */
+ 6 1 /* MPP[ 6]: SYSRST_OUTn */
+ 7 0 /* MPP[ 7]: GPO[7] */
+ 8 1 /* MPP[ 8]: TW_SDA */
+ 9 1 /* MPP[ 9]: TW_SCK */
+ 10 3 /* MPP[10]: UA0_TXD */
+ 11 3 /* MPP[11]: US0_RXD */
+ 12 1 /* MPP[12]: SD_CLK */
+ 13 1 /* MPP[13]: SD_CMD */
+ 14 1 /* MPP[14]: SD_D[0] */
+ 15 1 /* MPP[15]: SD_D[1] */
+ 16 1 /* MPP[16]: SD_D[2] */
+ 17 1 /* MPP[17]: SD_D[3] */
+ 18 1 /* MPP[18]: NF_IO[0] */
+ 19 1 /* MPP[19]: NF_IO[1] */
+ 20 3 /* MPP[20]: GE1[ 0] */
+ 21 3 /* MPP[21]: GE1[ 1] */
+ 22 3 /* MPP[22]: GE1[ 2] */
+ 23 3 /* MPP[23]: GE1[ 3] */
+ 24 3 /* MPP[24]: GE1[ 4] */
+ 25 3 /* MPP[25]: GE1[ 5] */
+ 26 3 /* MPP[26]: GE1[ 6] */
+ 27 3 /* MPP[27]: GE1[ 7] */
+ 28 3 /* MPP[28]: GE1[ 8] */
+ 29 3 /* MPP[29]: GE1[ 9] */
+ 30 3 /* MPP[30]: GE1[10] */
+ 31 3 /* MPP[31]: GE1[11] */
+ 32 3 /* MPP[32]: GE1[12] */
+ 33 3 /* MPP[33]: GE1[13] */
+ 34 3 /* MPP[34]: GE1[14] */
+ 35 3 /* MPP[35]: GE1[15] */
+ 36 0 /* MPP[36]: GPIO[36] */
+ 37 0 /* MPP[37]: GPIO[37] */
+ 38 0 /* MPP[38]: GPIO[38] */
+ 39 0 /* MPP[39]: GPIO[39] */
+ 40 2 /* MPP[40]: TDM_SPI_SCK */
+ 41 2 /* MPP[41]: TDM_SPI_MISO */
+ 42 2 /* MPP[42]: TDM_SPI_MOSI */
+ 43 0 /* MPP[43]: GPIO[43] */
+ 44 0 /* MPP[44]: GPIO[44] */
+ 45 0 /* MPP[45]: GPIO[45] */
+ 46 0 /* MPP[46]: GPIO[46] */
+ 47 0 /* MPP[47]: GPIO[47] */
+ 48 0 /* MPP[48]: GPIO[48] */
+ 49 0 /* MPP[49]: GPIO[49] */
+ >;
+ };
+
+ GPIO: gpio at 10100 {
+ #gpio-cells = <3>;
+ compatible = "mrvl,gpio";
+ reg = <0x10100 0x20>;
+ gpio-controller;
+ interrupts = <35 36 37 38 39 40 41>;
+ interrupt-parent = <&PIC>;
+ pin-count = <50>;
+ };
+
+ gpioled at 0 {
+ compatible = "mrvl,gpioled";
+
+ gpios = <&GPIO 47 2 0 /* GPIO[47] BT LED: OUT */
+ &GPIO 48 2 0 /* GPIO[48] WLAN LED: OUT */
+ &GPIO 49 2 0>; /* GPIO[49] WLAN AP LED: OUT */
+ };
+
+ rtc at 10300 {
+ compatible = "mrvl,rtc";
+ reg = <0x10300 0x08>;
+ };
+
+ twsi at 11000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,twsi";
+ reg = <0x11000 0x20>;
+ interrupts = <43>;
+ interrupt-parent = <&PIC>;
+ };
+
+ enet0: ethernet at 72000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x72000 0x2000>;
+ ranges = <0x0 0x72000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <12 13 14 11 46>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+
+ mdio at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,mdio";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ };
+ };
+ };
+
+ enet1: ethernet at 76000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x76000 0x02000>;
+ ranges = <0x0 0x76000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <16 17 18 15 47>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ };
+
+ serial0: serial at 12000 {
+ compatible = "ns16550";
+ reg = <0x12000 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ };
+
+ serial1: serial at 12100 {
+ compatible = "ns16550";
+ reg = <0x12100 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <34>;
+ interrupt-parent = <&PIC>;
+ };
+
+ crypto at 30000 {
+ compatible = "mrvl,cesa";
+ reg = <0x30000 0x10000>;
+ interrupts = <22>;
+ interrupt-parent = <&PIC>;
+
+ sram-handle = <&SRAM>;
+ };
+
+ usb at 50000 {
+ compatible = "mrvl,usb-ehci", "usb-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <48 19>;
+ interrupt-parent = <&PIC>;
+ };
+
+ xor at 60000 {
+ compatible = "mrvl,xor";
+ reg = <0x60000 0x1000>;
+ interrupts = <5 6 7 8>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sata at 80000 {
+ compatible = "mrvl,sata";
+ reg = <0x80000 0x6000>;
+ interrupts = <21>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sdio at 90000 {
+ compatible = "mrvl,sdio";
+ reg = <0x90000 0x134>;
+ interrupts = <28>;
+ interrupt-parent = <&PIC>;
+ };
+ };
+
+ SRAM: sram at fd000000 {
+ compatible = "mrvl,cesa-sram";
+ reg = <0xfd000000 0x00100000>;
+ };
+
+ chosen {
+ stdin = "serial0";
+ stdout = "serial0";
+ };
+
+};
More information about the svn-src-head
mailing list