svn commit: r247366 - in head/sys/dev/ath: . ath_hal

[Adrian Chadd]

Author: adrian
Date: Wed Feb 27 00:25:44 2013
New Revision: 247366
URL: http://svnweb.freebsd.org/changeset/base/247366

Log:
  Add in the STBC TX/RX capability support into the HAL and driver.
  
  The HAL already included the STBC fields; it just needed to be exposed
  to the driver and net80211 stack.
  
  This should allow single-stream STBC TX and RX to be negotiated; however
  the driver and rate control code currently don't do anything with it.

Modified:
  head/sys/dev/ath/ath_hal/ah.c
  head/sys/dev/ath/ath_hal/ah.h
  head/sys/dev/ath/if_ath.c
  head/sys/dev/ath/if_athvar.h

Modified: head/sys/dev/ath/ath_hal/ah.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ah.c	Wed Feb 27 00:14:12 2013	(r247365)
+++ head/sys/dev/ath/ath_hal/ah.c	Wed Feb 27 00:25:44 2013	(r247366)
@@ -692,6 +692,10 @@ ath_hal_getcapability(struct ath_hal *ah
 		return pCap->hal4AddrAggrSupport ? HAL_OK : HAL_ENOTSUPP;
 	case HAL_CAP_EXT_CHAN_DFS:
 		return pCap->halExtChanDfsSupport ? HAL_OK : HAL_ENOTSUPP;
+	case HAL_CAP_RX_STBC:
+		return pCap->halRxStbcSupport ? HAL_OK : HAL_ENOTSUPP;
+	case HAL_CAP_TX_STBC:
+		return pCap->halTxStbcSupport ? HAL_OK : HAL_ENOTSUPP;
 	case HAL_CAP_COMBINED_RADAR_RSSI:
 		return pCap->halUseCombinedRadarRssi ? HAL_OK : HAL_ENOTSUPP;
 	case HAL_CAP_AUTO_SLEEP:

Modified: head/sys/dev/ath/ath_hal/ah.h
==============================================================================
--- head/sys/dev/ath/ath_hal/ah.h	Wed Feb 27 00:14:12 2013	(r247365)
+++ head/sys/dev/ath/ath_hal/ah.h	Wed Feb 27 00:25:44 2013	(r247366)
@@ -137,6 +137,9 @@ typedef enum {
 	HAL_CAP_RIFS_RX_ENABLED	= 53,
 	HAL_CAP_BB_DFS_HANG	= 54,
 
+	HAL_CAP_RX_STBC		= 58,
+	HAL_CAP_TX_STBC		= 59,
+
 	HAL_CAP_BT_COEX		= 60,	/* hardware is capable of bluetooth coexistence */
 	HAL_CAP_DYNAMIC_SMPS	= 61,	/* Dynamic MIMO Power Save hardware support */
 

Modified: head/sys/dev/ath/if_ath.c
==============================================================================
--- head/sys/dev/ath/if_ath.c	Wed Feb 27 00:14:12 2013	(r247365)
+++ head/sys/dev/ath/if_ath.c	Wed Feb 27 00:25:44 2013	(r247366)
@@ -781,6 +781,28 @@ ath_attach(u_int16_t devid, struct ath_s
 		ic->ic_txstream = txs;
 		ic->ic_rxstream = rxs;
 
+		/*
+		 * Setup TX and RX STBC based on what the HAL allows and
+		 * the currently configured chainmask set.
+		 * Ie - don't enable STBC TX if only one chain is enabled.
+		 * STBC RX is fine on a single RX chain; it just won't
+		 * provide any real benefit.
+		 */
+		if (ath_hal_getcapability(ah, HAL_CAP_RX_STBC, 0,
+		    NULL) == HAL_OK) {
+			sc->sc_rx_stbc = 1;
+			device_printf(sc->sc_dev,
+			    "[HT] 1 stream STBC receive enabled\n");
+			ic->ic_htcaps |= IEEE80211_HTCAP_RXSTBC_1STREAM;
+		}
+		if (txs > 1 && ath_hal_getcapability(ah, HAL_CAP_TX_STBC, 0,
+		    NULL) == HAL_OK) {
+			sc->sc_tx_stbc = 1;
+			device_printf(sc->sc_dev,
+			    "[HT] 1 stream STBC transmit enabled\n");
+			ic->ic_htcaps |= IEEE80211_HTCAP_TXSTBC;
+		}
+
 		(void) ath_hal_getcapability(ah, HAL_CAP_RTS_AGGR_LIMIT, 1,
 		    &sc->sc_rts_aggr_limit);
 		if (sc->sc_rts_aggr_limit != (64 * 1024))

Modified: head/sys/dev/ath/if_athvar.h
==============================================================================
--- head/sys/dev/ath/if_athvar.h	Wed Feb 27 00:14:12 2013	(r247365)
+++ head/sys/dev/ath/if_athvar.h	Wed Feb 27 00:25:44 2013	(r247366)
@@ -567,7 +567,9 @@ struct ath_softc {
 	/*
 	 * Second set of flags.
 	 */
-	u_int32_t		sc_use_ent  : 1;
+	u_int32_t		sc_use_ent  : 1,
+				sc_rx_stbc  : 1,
+				sc_tx_stbc  : 1;
 
 	/*
 	 * Enterprise mode configuration for AR9380 and later chipsets.