svn commit: r235680 - in head/sys: conf dev/ath modules/ath
Adrian Chadd
adrian at FreeBSD.org
Sun May 20 04:14:30 UTC 2012
Author: adrian
Date: Sun May 20 04:14:29 2012
New Revision: 235680
URL: http://svn.freebsd.org/changeset/base/235680
Log:
Migrate most of the beacon handling functions out to if_ath_beacon.c.
This is also in preparation for supporting AR9300 and later NICs.
Added:
head/sys/dev/ath/if_ath_beacon.c (contents, props changed)
Modified:
head/sys/conf/files
head/sys/dev/ath/if_ath.c
head/sys/dev/ath/if_ath_beacon.h
head/sys/dev/ath/if_ath_misc.h
head/sys/modules/ath/Makefile
Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files Sun May 20 02:49:42 2012 (r235679)
+++ head/sys/conf/files Sun May 20 04:14:29 2012 (r235680)
@@ -710,6 +710,8 @@ dev/ath/if_ath_ahb.c optional ath_ahb \
#
dev/ath/if_ath.c optional ath \
compile-with "${NORMAL_C} -I$S/dev/ath"
+dev/ath/if_ath_beacon.c optional ath \
+ compile-with "${NORMAL_C} -I$S/dev/ath"
dev/ath/if_ath_debug.c optional ath \
compile-with "${NORMAL_C} -I$S/dev/ath"
dev/ath/if_ath_keycache.c optional ath \
Modified: head/sys/dev/ath/if_ath.c
==============================================================================
--- head/sys/dev/ath/if_ath.c Sun May 20 02:49:42 2012 (r235679)
+++ head/sys/dev/ath/if_ath.c Sun May 20 04:14:29 2012 (r235680)
@@ -153,17 +153,9 @@ static void ath_key_update_begin(struct
static void ath_key_update_end(struct ieee80211vap *);
static void ath_update_mcast(struct ifnet *);
static void ath_update_promisc(struct ifnet *);
-static void ath_setslottime(struct ath_softc *);
static void ath_updateslot(struct ifnet *);
-static int ath_beaconq_setup(struct ath_hal *);
-static int ath_beacon_alloc(struct ath_softc *, struct ieee80211_node *);
-static void ath_beacon_update(struct ieee80211vap *, int item);
-static void ath_beacon_setup(struct ath_softc *, struct ath_buf *);
-static void ath_beacon_proc(void *, int);
static void ath_bstuck_proc(void *, int);
static void ath_reset_proc(void *, int);
-static void ath_beacon_return(struct ath_softc *, struct ath_buf *);
-static void ath_beacon_free(struct ath_softc *);
static void ath_descdma_cleanup(struct ath_softc *sc,
struct ath_descdma *, ath_bufhead *);
static int ath_desc_alloc(struct ath_softc *);
@@ -2541,7 +2533,7 @@ ath_mode_init(struct ath_softc *sc)
/*
* Set the slot time based on the current setting.
*/
-static void
+void
ath_setslottime(struct ath_softc *sc)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
@@ -2594,248 +2586,10 @@ ath_updateslot(struct ifnet *ifp)
}
/*
- * Setup a h/w transmit queue for beacons.
- */
-static int
-ath_beaconq_setup(struct ath_hal *ah)
-{
- HAL_TXQ_INFO qi;
-
- memset(&qi, 0, sizeof(qi));
- qi.tqi_aifs = HAL_TXQ_USEDEFAULT;
- qi.tqi_cwmin = HAL_TXQ_USEDEFAULT;
- qi.tqi_cwmax = HAL_TXQ_USEDEFAULT;
- /* NB: for dynamic turbo, don't enable any other interrupts */
- qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE;
- return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi);
-}
-
-/*
- * Setup the transmit queue parameters for the beacon queue.
- */
-int
-ath_beaconq_config(struct ath_softc *sc)
-{
-#define ATH_EXPONENT_TO_VALUE(v) ((1<<(v))-1)
- struct ieee80211com *ic = sc->sc_ifp->if_l2com;
- struct ath_hal *ah = sc->sc_ah;
- HAL_TXQ_INFO qi;
-
- ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi);
- if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
- ic->ic_opmode == IEEE80211_M_MBSS) {
- /*
- * Always burst out beacon and CAB traffic.
- */
- qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT;
- qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT;
- qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT;
- } else {
- struct wmeParams *wmep =
- &ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE];
- /*
- * Adhoc mode; important thing is to use 2x cwmin.
- */
- qi.tqi_aifs = wmep->wmep_aifsn;
- qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
- qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
- }
-
- if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) {
- device_printf(sc->sc_dev, "unable to update parameters for "
- "beacon hardware queue!\n");
- return 0;
- } else {
- ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
- return 1;
- }
-#undef ATH_EXPONENT_TO_VALUE
-}
-
-/*
- * Allocate and setup an initial beacon frame.
- */
-static int
-ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni)
-{
- struct ieee80211vap *vap = ni->ni_vap;
- struct ath_vap *avp = ATH_VAP(vap);
- struct ath_buf *bf;
- struct mbuf *m;
- int error;
-
- bf = avp->av_bcbuf;
- DPRINTF(sc, ATH_DEBUG_NODE, "%s: bf_m=%p, bf_node=%p\n",
- __func__, bf->bf_m, bf->bf_node);
- if (bf->bf_m != NULL) {
- bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
- m_freem(bf->bf_m);
- bf->bf_m = NULL;
- }
- if (bf->bf_node != NULL) {
- ieee80211_free_node(bf->bf_node);
- bf->bf_node = NULL;
- }
-
- /*
- * NB: the beacon data buffer must be 32-bit aligned;
- * we assume the mbuf routines will return us something
- * with this alignment (perhaps should assert).
- */
- m = ieee80211_beacon_alloc(ni, &avp->av_boff);
- if (m == NULL) {
- device_printf(sc->sc_dev, "%s: cannot get mbuf\n", __func__);
- sc->sc_stats.ast_be_nombuf++;
- return ENOMEM;
- }
- error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
- bf->bf_segs, &bf->bf_nseg,
- BUS_DMA_NOWAIT);
- if (error != 0) {
- device_printf(sc->sc_dev,
- "%s: cannot map mbuf, bus_dmamap_load_mbuf_sg returns %d\n",
- __func__, error);
- m_freem(m);
- return error;
- }
-
- /*
- * Calculate a TSF adjustment factor required for staggered
- * beacons. Note that we assume the format of the beacon
- * frame leaves the tstamp field immediately following the
- * header.
- */
- if (sc->sc_stagbeacons && avp->av_bslot > 0) {
- uint64_t tsfadjust;
- struct ieee80211_frame *wh;
-
- /*
- * The beacon interval is in TU's; the TSF is in usecs.
- * We figure out how many TU's to add to align the timestamp
- * then convert to TSF units and handle byte swapping before
- * inserting it in the frame. The hardware will then add this
- * each time a beacon frame is sent. Note that we align vap's
- * 1..N and leave vap 0 untouched. This means vap 0 has a
- * timestamp in one beacon interval while the others get a
- * timstamp aligned to the next interval.
- */
- tsfadjust = ni->ni_intval *
- (ATH_BCBUF - avp->av_bslot) / ATH_BCBUF;
- tsfadjust = htole64(tsfadjust << 10); /* TU -> TSF */
-
- DPRINTF(sc, ATH_DEBUG_BEACON,
- "%s: %s beacons bslot %d intval %u tsfadjust %llu\n",
- __func__, sc->sc_stagbeacons ? "stagger" : "burst",
- avp->av_bslot, ni->ni_intval,
- (long long unsigned) le64toh(tsfadjust));
-
- wh = mtod(m, struct ieee80211_frame *);
- memcpy(&wh[1], &tsfadjust, sizeof(tsfadjust));
- }
- bf->bf_m = m;
- bf->bf_node = ieee80211_ref_node(ni);
-
- return 0;
-}
-
-/*
- * Setup the beacon frame for transmit.
- */
-static void
-ath_beacon_setup(struct ath_softc *sc, struct ath_buf *bf)
-{
-#define USE_SHPREAMBLE(_ic) \
- (((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\
- == IEEE80211_F_SHPREAMBLE)
- struct ieee80211_node *ni = bf->bf_node;
- struct ieee80211com *ic = ni->ni_ic;
- struct mbuf *m = bf->bf_m;
- struct ath_hal *ah = sc->sc_ah;
- struct ath_desc *ds;
- int flags, antenna;
- const HAL_RATE_TABLE *rt;
- u_int8_t rix, rate;
-
- DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: m %p len %u\n",
- __func__, m, m->m_len);
-
- /* setup descriptors */
- ds = bf->bf_desc;
- bf->bf_last = bf;
- bf->bf_lastds = ds;
-
- flags = HAL_TXDESC_NOACK;
- if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) {
- ds->ds_link = bf->bf_daddr; /* self-linked */
- flags |= HAL_TXDESC_VEOL;
- /*
- * Let hardware handle antenna switching.
- */
- antenna = sc->sc_txantenna;
- } else {
- ds->ds_link = 0;
- /*
- * Switch antenna every 4 beacons.
- * XXX assumes two antenna
- */
- if (sc->sc_txantenna != 0)
- antenna = sc->sc_txantenna;
- else if (sc->sc_stagbeacons && sc->sc_nbcnvaps != 0)
- antenna = ((sc->sc_stats.ast_be_xmit / sc->sc_nbcnvaps) & 4 ? 2 : 1);
- else
- antenna = (sc->sc_stats.ast_be_xmit & 4 ? 2 : 1);
- }
-
- KASSERT(bf->bf_nseg == 1,
- ("multi-segment beacon frame; nseg %u", bf->bf_nseg));
- ds->ds_data = bf->bf_segs[0].ds_addr;
- /*
- * Calculate rate code.
- * XXX everything at min xmit rate
- */
- rix = 0;
- rt = sc->sc_currates;
- rate = rt->info[rix].rateCode;
- if (USE_SHPREAMBLE(ic))
- rate |= rt->info[rix].shortPreamble;
- ath_hal_setuptxdesc(ah, ds
- , m->m_len + IEEE80211_CRC_LEN /* frame length */
- , sizeof(struct ieee80211_frame)/* header length */
- , HAL_PKT_TYPE_BEACON /* Atheros packet type */
- , ni->ni_txpower /* txpower XXX */
- , rate, 1 /* series 0 rate/tries */
- , HAL_TXKEYIX_INVALID /* no encryption */
- , antenna /* antenna mode */
- , flags /* no ack, veol for beacons */
- , 0 /* rts/cts rate */
- , 0 /* rts/cts duration */
- );
- /* NB: beacon's BufLen must be a multiple of 4 bytes */
- ath_hal_filltxdesc(ah, ds
- , roundup(m->m_len, 4) /* buffer length */
- , AH_TRUE /* first segment */
- , AH_TRUE /* last segment */
- , ds /* first descriptor */
- );
-#if 0
- ath_desc_swap(ds);
-#endif
-#undef USE_SHPREAMBLE
-}
-
-static void
-ath_beacon_update(struct ieee80211vap *vap, int item)
-{
- struct ieee80211_beacon_offsets *bo = &ATH_VAP(vap)->av_boff;
-
- setbit(bo->bo_flags, item);
-}
-
-/*
* Append the contents of src to dst; both queues
* are assumed to be locked.
*/
-static void
+void
ath_txqmove(struct ath_txq *dst, struct ath_txq *src)
{
@@ -2852,255 +2606,6 @@ ath_txqmove(struct ath_txq *dst, struct
}
/*
- * Transmit a beacon frame at SWBA. Dynamic updates to the
- * frame contents are done as needed and the slot time is
- * also adjusted based on current state.
- */
-static void
-ath_beacon_proc(void *arg, int pending)
-{
- struct ath_softc *sc = arg;
- struct ath_hal *ah = sc->sc_ah;
- struct ieee80211vap *vap;
- struct ath_buf *bf;
- int slot, otherant;
- uint32_t bfaddr;
-
- DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: pending %u\n",
- __func__, pending);
- /*
- * Check if the previous beacon has gone out. If
- * not don't try to post another, skip this period
- * and wait for the next. Missed beacons indicate
- * a problem and should not occur. If we miss too
- * many consecutive beacons reset the device.
- */
- if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) {
- sc->sc_bmisscount++;
- sc->sc_stats.ast_be_missed++;
- DPRINTF(sc, ATH_DEBUG_BEACON,
- "%s: missed %u consecutive beacons\n",
- __func__, sc->sc_bmisscount);
- if (sc->sc_bmisscount >= ath_bstuck_threshold)
- taskqueue_enqueue(sc->sc_tq, &sc->sc_bstucktask);
- return;
- }
- if (sc->sc_bmisscount != 0) {
- DPRINTF(sc, ATH_DEBUG_BEACON,
- "%s: resume beacon xmit after %u misses\n",
- __func__, sc->sc_bmisscount);
- sc->sc_bmisscount = 0;
- }
-
- if (sc->sc_stagbeacons) { /* staggered beacons */
- struct ieee80211com *ic = sc->sc_ifp->if_l2com;
- uint32_t tsftu;
-
- tsftu = ath_hal_gettsf32(ah) >> 10;
- /* XXX lintval */
- slot = ((tsftu % ic->ic_lintval) * ATH_BCBUF) / ic->ic_lintval;
- vap = sc->sc_bslot[(slot+1) % ATH_BCBUF];
- bfaddr = 0;
- if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) {
- bf = ath_beacon_generate(sc, vap);
- if (bf != NULL)
- bfaddr = bf->bf_daddr;
- }
- } else { /* burst'd beacons */
- uint32_t *bflink = &bfaddr;
-
- for (slot = 0; slot < ATH_BCBUF; slot++) {
- vap = sc->sc_bslot[slot];
- if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) {
- bf = ath_beacon_generate(sc, vap);
- if (bf != NULL) {
- *bflink = bf->bf_daddr;
- bflink = &bf->bf_desc->ds_link;
- }
- }
- }
- *bflink = 0; /* terminate list */
- }
-
- /*
- * Handle slot time change when a non-ERP station joins/leaves
- * an 11g network. The 802.11 layer notifies us via callback,
- * we mark updateslot, then wait one beacon before effecting
- * the change. This gives associated stations at least one
- * beacon interval to note the state change.
- */
- /* XXX locking */
- if (sc->sc_updateslot == UPDATE) {
- sc->sc_updateslot = COMMIT; /* commit next beacon */
- sc->sc_slotupdate = slot;
- } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
- ath_setslottime(sc); /* commit change to h/w */
-
- /*
- * Check recent per-antenna transmit statistics and flip
- * the default antenna if noticeably more frames went out
- * on the non-default antenna.
- * XXX assumes 2 anntenae
- */
- if (!sc->sc_diversity && (!sc->sc_stagbeacons || slot == 0)) {
- otherant = sc->sc_defant & 1 ? 2 : 1;
- if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2)
- ath_setdefantenna(sc, otherant);
- sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0;
- }
-
- if (bfaddr != 0) {
- /*
- * Stop any current dma and put the new frame on the queue.
- * This should never fail since we check above that no frames
- * are still pending on the queue.
- */
- if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) {
- DPRINTF(sc, ATH_DEBUG_ANY,
- "%s: beacon queue %u did not stop?\n",
- __func__, sc->sc_bhalq);
- }
- /* NB: cabq traffic should already be queued and primed */
- ath_hal_puttxbuf(ah, sc->sc_bhalq, bfaddr);
- ath_hal_txstart(ah, sc->sc_bhalq);
-
- sc->sc_stats.ast_be_xmit++;
- }
-}
-
-struct ath_buf *
-ath_beacon_generate(struct ath_softc *sc, struct ieee80211vap *vap)
-{
- struct ath_vap *avp = ATH_VAP(vap);
- struct ath_txq *cabq = sc->sc_cabq;
- struct ath_buf *bf;
- struct mbuf *m;
- int nmcastq, error;
-
- KASSERT(vap->iv_state >= IEEE80211_S_RUN,
- ("not running, state %d", vap->iv_state));
- KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer"));
-
- /*
- * Update dynamic beacon contents. If this returns
- * non-zero then we need to remap the memory because
- * the beacon frame changed size (probably because
- * of the TIM bitmap).
- */
- bf = avp->av_bcbuf;
- m = bf->bf_m;
- /* XXX lock mcastq? */
- nmcastq = avp->av_mcastq.axq_depth;
-
- if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, nmcastq)) {
- /* XXX too conservative? */
- bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
- error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
- bf->bf_segs, &bf->bf_nseg,
- BUS_DMA_NOWAIT);
- if (error != 0) {
- if_printf(vap->iv_ifp,
- "%s: bus_dmamap_load_mbuf_sg failed, error %u\n",
- __func__, error);
- return NULL;
- }
- }
- if ((avp->av_boff.bo_tim[4] & 1) && cabq->axq_depth) {
- DPRINTF(sc, ATH_DEBUG_BEACON,
- "%s: cabq did not drain, mcastq %u cabq %u\n",
- __func__, nmcastq, cabq->axq_depth);
- sc->sc_stats.ast_cabq_busy++;
- if (sc->sc_nvaps > 1 && sc->sc_stagbeacons) {
- /*
- * CABQ traffic from a previous vap is still pending.
- * We must drain the q before this beacon frame goes
- * out as otherwise this vap's stations will get cab
- * frames from a different vap.
- * XXX could be slow causing us to miss DBA
- */
- ath_tx_draintxq(sc, cabq);
- }
- }
- ath_beacon_setup(sc, bf);
- bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
-
- /*
- * Enable the CAB queue before the beacon queue to
- * insure cab frames are triggered by this beacon.
- */
- if (avp->av_boff.bo_tim[4] & 1) {
- struct ath_hal *ah = sc->sc_ah;
-
- /* NB: only at DTIM */
- ATH_TXQ_LOCK(cabq);
- ATH_TXQ_LOCK(&avp->av_mcastq);
- if (nmcastq) {
- struct ath_buf *bfm;
-
- /*
- * Move frames from the s/w mcast q to the h/w cab q.
- * XXX MORE_DATA bit
- */
- bfm = TAILQ_FIRST(&avp->av_mcastq.axq_q);
- if (cabq->axq_link != NULL) {
- *cabq->axq_link = bfm->bf_daddr;
- } else
- ath_hal_puttxbuf(ah, cabq->axq_qnum,
- bfm->bf_daddr);
- ath_txqmove(cabq, &avp->av_mcastq);
-
- sc->sc_stats.ast_cabq_xmit += nmcastq;
- }
- /* NB: gated by beacon so safe to start here */
- if (! TAILQ_EMPTY(&(cabq->axq_q)))
- ath_hal_txstart(ah, cabq->axq_qnum);
- ATH_TXQ_UNLOCK(&avp->av_mcastq);
- ATH_TXQ_UNLOCK(cabq);
- }
- return bf;
-}
-
-static void
-ath_beacon_start_adhoc(struct ath_softc *sc, struct ieee80211vap *vap)
-{
- struct ath_vap *avp = ATH_VAP(vap);
- struct ath_hal *ah = sc->sc_ah;
- struct ath_buf *bf;
- struct mbuf *m;
- int error;
-
- KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer"));
-
- /*
- * Update dynamic beacon contents. If this returns
- * non-zero then we need to remap the memory because
- * the beacon frame changed size (probably because
- * of the TIM bitmap).
- */
- bf = avp->av_bcbuf;
- m = bf->bf_m;
- if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, 0)) {
- /* XXX too conservative? */
- bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
- error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
- bf->bf_segs, &bf->bf_nseg,
- BUS_DMA_NOWAIT);
- if (error != 0) {
- if_printf(vap->iv_ifp,
- "%s: bus_dmamap_load_mbuf_sg failed, error %u\n",
- __func__, error);
- return;
- }
- }
- ath_beacon_setup(sc, bf);
- bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
-
- /* NB: caller is known to have already stopped tx dma */
- ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr);
- ath_hal_txstart(ah, sc->sc_bhalq);
-}
-
-/*
* Reset the hardware, with no loss.
*
* This can't be used for a general case reset.
@@ -3140,255 +2645,6 @@ ath_bstuck_proc(void *arg, int pending)
ath_reset(ifp, ATH_RESET_NOLOSS);
}
-/*
- * Reclaim beacon resources and return buffer to the pool.
- */
-static void
-ath_beacon_return(struct ath_softc *sc, struct ath_buf *bf)
-{
-
- DPRINTF(sc, ATH_DEBUG_NODE, "%s: free bf=%p, bf_m=%p, bf_node=%p\n",
- __func__, bf, bf->bf_m, bf->bf_node);
- if (bf->bf_m != NULL) {
- bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
- m_freem(bf->bf_m);
- bf->bf_m = NULL;
- }
- if (bf->bf_node != NULL) {
- ieee80211_free_node(bf->bf_node);
- bf->bf_node = NULL;
- }
- TAILQ_INSERT_TAIL(&sc->sc_bbuf, bf, bf_list);
-}
-
-/*
- * Reclaim beacon resources.
- */
-static void
-ath_beacon_free(struct ath_softc *sc)
-{
- struct ath_buf *bf;
-
- TAILQ_FOREACH(bf, &sc->sc_bbuf, bf_list) {
- DPRINTF(sc, ATH_DEBUG_NODE,
- "%s: free bf=%p, bf_m=%p, bf_node=%p\n",
- __func__, bf, bf->bf_m, bf->bf_node);
- if (bf->bf_m != NULL) {
- bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
- m_freem(bf->bf_m);
- bf->bf_m = NULL;
- }
- if (bf->bf_node != NULL) {
- ieee80211_free_node(bf->bf_node);
- bf->bf_node = NULL;
- }
- }
-}
-
-/*
- * Configure the beacon and sleep timers.
- *
- * When operating as an AP this resets the TSF and sets
- * up the hardware to notify us when we need to issue beacons.
- *
- * When operating in station mode this sets up the beacon
- * timers according to the timestamp of the last received
- * beacon and the current TSF, configures PCF and DTIM
- * handling, programs the sleep registers so the hardware
- * will wakeup in time to receive beacons, and configures
- * the beacon miss handling so we'll receive a BMISS
- * interrupt when we stop seeing beacons from the AP
- * we've associated with.
- */
-void
-ath_beacon_config(struct ath_softc *sc, struct ieee80211vap *vap)
-{
-#define TSF_TO_TU(_h,_l) \
- ((((u_int32_t)(_h)) << 22) | (((u_int32_t)(_l)) >> 10))
-#define FUDGE 2
- struct ath_hal *ah = sc->sc_ah;
- struct ieee80211com *ic = sc->sc_ifp->if_l2com;
- struct ieee80211_node *ni;
- u_int32_t nexttbtt, intval, tsftu;
- u_int64_t tsf;
-
- if (vap == NULL)
- vap = TAILQ_FIRST(&ic->ic_vaps); /* XXX */
- ni = ieee80211_ref_node(vap->iv_bss);
-
- /* extract tstamp from last beacon and convert to TU */
- nexttbtt = TSF_TO_TU(LE_READ_4(ni->ni_tstamp.data + 4),
- LE_READ_4(ni->ni_tstamp.data));
- if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
- ic->ic_opmode == IEEE80211_M_MBSS) {
- /*
- * For multi-bss ap/mesh support beacons are either staggered
- * evenly over N slots or burst together. For the former
- * arrange for the SWBA to be delivered for each slot.
- * Slots that are not occupied will generate nothing.
- */
- /* NB: the beacon interval is kept internally in TU's */
- intval = ni->ni_intval & HAL_BEACON_PERIOD;
- if (sc->sc_stagbeacons)
- intval /= ATH_BCBUF;
- } else {
- /* NB: the beacon interval is kept internally in TU's */
- intval = ni->ni_intval & HAL_BEACON_PERIOD;
- }
- if (nexttbtt == 0) /* e.g. for ap mode */
- nexttbtt = intval;
- else if (intval) /* NB: can be 0 for monitor mode */
- nexttbtt = roundup(nexttbtt, intval);
- DPRINTF(sc, ATH_DEBUG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
- __func__, nexttbtt, intval, ni->ni_intval);
- if (ic->ic_opmode == IEEE80211_M_STA && !sc->sc_swbmiss) {
- HAL_BEACON_STATE bs;
- int dtimperiod, dtimcount;
- int cfpperiod, cfpcount;
-
- /*
- * Setup dtim and cfp parameters according to
- * last beacon we received (which may be none).
- */
- dtimperiod = ni->ni_dtim_period;
- if (dtimperiod <= 0) /* NB: 0 if not known */
- dtimperiod = 1;
- dtimcount = ni->ni_dtim_count;
- if (dtimcount >= dtimperiod) /* NB: sanity check */
- dtimcount = 0; /* XXX? */
- cfpperiod = 1; /* NB: no PCF support yet */
- cfpcount = 0;
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF and calculate dtim+cfp state for the result.
- */
- tsf = ath_hal_gettsf64(ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
- do {
- nexttbtt += intval;
- if (--dtimcount < 0) {
- dtimcount = dtimperiod - 1;
- if (--cfpcount < 0)
- cfpcount = cfpperiod - 1;
- }
- } while (nexttbtt < tsftu);
- memset(&bs, 0, sizeof(bs));
- bs.bs_intval = intval;
- bs.bs_nexttbtt = nexttbtt;
- bs.bs_dtimperiod = dtimperiod*intval;
- bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
- bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
- bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
- bs.bs_cfpmaxduration = 0;
-#if 0
- /*
- * The 802.11 layer records the offset to the DTIM
- * bitmap while receiving beacons; use it here to
- * enable h/w detection of our AID being marked in
- * the bitmap vector (to indicate frames for us are
- * pending at the AP).
- * XXX do DTIM handling in s/w to WAR old h/w bugs
- * XXX enable based on h/w rev for newer chips
- */
- bs.bs_timoffset = ni->ni_timoff;
-#endif
- /*
- * Calculate the number of consecutive beacons to miss
- * before taking a BMISS interrupt.
- * Note that we clamp the result to at most 10 beacons.
- */
- bs.bs_bmissthreshold = vap->iv_bmissthreshold;
- if (bs.bs_bmissthreshold > 10)
- bs.bs_bmissthreshold = 10;
- else if (bs.bs_bmissthreshold <= 0)
- bs.bs_bmissthreshold = 1;
-
- /*
- * Calculate sleep duration. The configuration is
- * given in ms. We insure a multiple of the beacon
- * period is used. Also, if the sleep duration is
- * greater than the DTIM period then it makes senses
- * to make it a multiple of that.
- *
- * XXX fixed at 100ms
- */
- bs.bs_sleepduration =
- roundup(IEEE80211_MS_TO_TU(100), bs.bs_intval);
- if (bs.bs_sleepduration > bs.bs_dtimperiod)
- bs.bs_sleepduration = roundup(bs.bs_sleepduration, bs.bs_dtimperiod);
-
- DPRINTF(sc, ATH_DEBUG_BEACON,
- "%s: tsf %ju tsf:tu %u intval %u nexttbtt %u dtim %u nextdtim %u bmiss %u sleep %u cfp:period %u maxdur %u next %u timoffset %u\n"
- , __func__
- , tsf, tsftu
- , bs.bs_intval
- , bs.bs_nexttbtt
- , bs.bs_dtimperiod
- , bs.bs_nextdtim
- , bs.bs_bmissthreshold
- , bs.bs_sleepduration
- , bs.bs_cfpperiod
- , bs.bs_cfpmaxduration
- , bs.bs_cfpnext
- , bs.bs_timoffset
- );
- ath_hal_intrset(ah, 0);
- ath_hal_beacontimers(ah, &bs);
- sc->sc_imask |= HAL_INT_BMISS;
- ath_hal_intrset(ah, sc->sc_imask);
- } else {
- ath_hal_intrset(ah, 0);
- if (nexttbtt == intval)
- intval |= HAL_BEACON_RESET_TSF;
- if (ic->ic_opmode == IEEE80211_M_IBSS) {
- /*
- * In IBSS mode enable the beacon timers but only
- * enable SWBA interrupts if we need to manually
- * prepare beacon frames. Otherwise we use a
- * self-linked tx descriptor and let the hardware
- * deal with things.
- */
- intval |= HAL_BEACON_ENA;
- if (!sc->sc_hasveol)
- sc->sc_imask |= HAL_INT_SWBA;
- if ((intval & HAL_BEACON_RESET_TSF) == 0) {
- /*
- * Pull nexttbtt forward to reflect
- * the current TSF.
- */
- tsf = ath_hal_gettsf64(ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
- do {
- nexttbtt += intval;
- } while (nexttbtt < tsftu);
- }
- ath_beaconq_config(sc);
- } else if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
- ic->ic_opmode == IEEE80211_M_MBSS) {
- /*
- * In AP/mesh mode we enable the beacon timers
- * and SWBA interrupts to prepare beacon frames.
- */
- intval |= HAL_BEACON_ENA;
- sc->sc_imask |= HAL_INT_SWBA; /* beacon prepare */
- ath_beaconq_config(sc);
- }
- ath_hal_beaconinit(ah, nexttbtt, intval);
- sc->sc_bmisscount = 0;
- ath_hal_intrset(ah, sc->sc_imask);
- /*
- * When using a self-linked beacon descriptor in
- * ibss mode load it once here.
- */
- if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol)
- ath_beacon_start_adhoc(sc, vap);
- }
- sc->sc_syncbeacon = 0;
- ieee80211_free_node(ni);
-#undef FUDGE
-#undef TSF_TO_TU
-}
-
static void
ath_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
Added: head/sys/dev/ath/if_ath_beacon.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/ath/if_ath_beacon.c Sun May 20 04:14:29 2012 (r235680)
@@ -0,0 +1,841 @@
+/*-
+ * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * Driver for the Atheros Wireless LAN controller.
+ *
+ * This software is derived from work of Atsushi Onoe; his contribution
+ * is greatly appreciated.
+ */
+
+#include "opt_inet.h"
+#include "opt_ath.h"
+/*
+ * This is needed for register operations which are performed
+ * by the driver - eg, calls to ath_hal_gettsf32().
+ *
+ * It's also required for any AH_DEBUG checks in here, eg the
+ * module dependencies.
+ */
+#include "opt_ah.h"
+#include "opt_wlan.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/sysctl.h>
+#include <sys/mbuf.h>
+#include <sys/malloc.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/kernel.h>
+#include <sys/socket.h>
+#include <sys/sockio.h>
+#include <sys/errno.h>
+#include <sys/callout.h>
+#include <sys/bus.h>
+#include <sys/endian.h>
+#include <sys/kthread.h>
+#include <sys/taskqueue.h>
+#include <sys/priv.h>
+#include <sys/module.h>
+#include <sys/ktr.h>
+#include <sys/smp.h> /* for mp_ncpus */
+
+#include <machine/bus.h>
+
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <net/if_media.h>
+#include <net/if_types.h>
+#include <net/if_arp.h>
+#include <net/ethernet.h>
+#include <net/if_llc.h>
+
+#include <net80211/ieee80211_var.h>
+#include <net80211/ieee80211_regdomain.h>
+#ifdef IEEE80211_SUPPORT_SUPERG
+#include <net80211/ieee80211_superg.h>
+#endif
+
+#include <net/bpf.h>
+
+#ifdef INET
+#include <netinet/in.h>
+#include <netinet/if_ether.h>
+#endif
+
+#include <dev/ath/if_athvar.h>
+
+#include <dev/ath/if_ath_debug.h>
+#include <dev/ath/if_ath_misc.h>
+#include <dev/ath/if_ath_tx.h>
+#include <dev/ath/if_ath_beacon.h>
+
+#ifdef ATH_TX99_DIAG
+#include <dev/ath/ath_tx99/ath_tx99.h>
+#endif
+
+/*
+ * Setup a h/w transmit queue for beacons.
+ */
+int
+ath_beaconq_setup(struct ath_hal *ah)
+{
+ HAL_TXQ_INFO qi;
+
+ memset(&qi, 0, sizeof(qi));
+ qi.tqi_aifs = HAL_TXQ_USEDEFAULT;
+ qi.tqi_cwmin = HAL_TXQ_USEDEFAULT;
+ qi.tqi_cwmax = HAL_TXQ_USEDEFAULT;
+ /* NB: for dynamic turbo, don't enable any other interrupts */
+ qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE;
+ return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi);
+}
+
+/*
+ * Setup the transmit queue parameters for the beacon queue.
+ */
+int
+ath_beaconq_config(struct ath_softc *sc)
+{
+#define ATH_EXPONENT_TO_VALUE(v) ((1<<(v))-1)
+ struct ieee80211com *ic = sc->sc_ifp->if_l2com;
+ struct ath_hal *ah = sc->sc_ah;
+ HAL_TXQ_INFO qi;
+
+ ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi);
+ if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
+ ic->ic_opmode == IEEE80211_M_MBSS) {
+ /*
+ * Always burst out beacon and CAB traffic.
+ */
+ qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT;
+ qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT;
+ qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT;
+ } else {
+ struct wmeParams *wmep =
+ &ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE];
+ /*
+ * Adhoc mode; important thing is to use 2x cwmin.
+ */
+ qi.tqi_aifs = wmep->wmep_aifsn;
+ qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
+ qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
+ }
+
+ if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) {
+ device_printf(sc->sc_dev, "unable to update parameters for "
+ "beacon hardware queue!\n");
+ return 0;
+ } else {
+ ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
+ return 1;
+ }
+#undef ATH_EXPONENT_TO_VALUE
+}
+
+/*
+ * Allocate and setup an initial beacon frame.
+ */
+int
+ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni)
+{
+ struct ieee80211vap *vap = ni->ni_vap;
+ struct ath_vap *avp = ATH_VAP(vap);
+ struct ath_buf *bf;
+ struct mbuf *m;
+ int error;
+
+ bf = avp->av_bcbuf;
+ DPRINTF(sc, ATH_DEBUG_NODE, "%s: bf_m=%p, bf_node=%p\n",
+ __func__, bf->bf_m, bf->bf_node);
+ if (bf->bf_m != NULL) {
+ bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
+ m_freem(bf->bf_m);
+ bf->bf_m = NULL;
+ }
+ if (bf->bf_node != NULL) {
+ ieee80211_free_node(bf->bf_node);
+ bf->bf_node = NULL;
+ }
+
+ /*
+ * NB: the beacon data buffer must be 32-bit aligned;
+ * we assume the mbuf routines will return us something
+ * with this alignment (perhaps should assert).
+ */
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-head
mailing list