svn commit: r233586 - head/sys/dev/fxp

Pyun YongHyeon yongari at FreeBSD.org
Wed Mar 28 01:27:28 UTC 2012


Author: yongari
Date: Wed Mar 28 01:27:27 2012
New Revision: 233586
URL: http://svn.freebsd.org/changeset/base/233586

Log:
  Load entire EEPROM contents in device attach time and verify
  whether the checksum of EEPROM is valid or not.  Because driver
  heavily relies on EEPROM information when it selectively enables
  features/workarounds, it would be helpful to know whether driver
  sees valid EEPROM.
  While I'm here remove all other EEPROM accesses since the entire
  EEPROM is loaded at device attach time.
  
  MFC after:	2 weeks

Modified:
  head/sys/dev/fxp/if_fxp.c
  head/sys/dev/fxp/if_fxpreg.h
  head/sys/dev/fxp/if_fxpvar.h

Modified: head/sys/dev/fxp/if_fxp.c
==============================================================================
--- head/sys/dev/fxp/if_fxp.c	Wed Mar 28 01:08:55 2012	(r233585)
+++ head/sys/dev/fxp/if_fxp.c	Wed Mar 28 01:27:27 2012	(r233586)
@@ -248,6 +248,7 @@ static uint16_t		fxp_eeprom_getword(stru
 static void 		fxp_eeprom_putword(struct fxp_softc *sc, int offset,
 			    uint16_t data);
 static void		fxp_autosize_eeprom(struct fxp_softc *sc);
+static void		fxp_load_eeprom(struct fxp_softc *sc);
 static void		fxp_read_eeprom(struct fxp_softc *sc, u_short *data,
 			    int offset, int words);
 static void		fxp_write_eeprom(struct fxp_softc *sc, u_short *data,
@@ -426,7 +427,7 @@ fxp_attach(device_t dev)
 	struct fxp_rx *rxp;
 	struct ifnet *ifp;
 	uint32_t val;
-	uint16_t data, myea[ETHER_ADDR_LEN / 2];
+	uint16_t data;
 	u_char eaddr[ETHER_ADDR_LEN];
 	int error, flags, i, pmc, prefer_iomap;
 
@@ -498,6 +499,7 @@ fxp_attach(device_t dev)
 	 * Find out how large of an SEEPROM we have.
 	 */
 	fxp_autosize_eeprom(sc);
+	fxp_load_eeprom(sc);
 
 	/*
 	 * Find out the chip revision; lump all 82557 revs together.
@@ -507,7 +509,7 @@ fxp_attach(device_t dev)
 		/* Assume ICH controllers are 82559. */
 		sc->revision = FXP_REV_82559_A0;
 	} else {
-		fxp_read_eeprom(sc, &data, 5, 1);
+		data = sc->eeprom[FXP_EEPROM_MAP_CNTR];
 		if ((data >> 8) == 1)
 			sc->revision = FXP_REV_82557;
 		else
@@ -519,7 +521,7 @@ fxp_attach(device_t dev)
 	 */
 	if (sc->revision >= FXP_REV_82558_A4 &&
 	    sc->revision != FXP_REV_82559S_A) {
-		fxp_read_eeprom(sc, &data, 10, 1);
+		data = sc->eeprom[FXP_EEPROM_MAP_ID];
 		if ((data & 0x20) != 0 &&
 		    pci_find_cap(sc->dev, PCIY_PMG, &pmc) == 0)
 			sc->flags |= FXP_FLAG_WOLCAP;
@@ -532,14 +534,14 @@ fxp_attach(device_t dev)
 		 * microcode is used for client-only featured 82550C
 		 * it locks up controller.
 		 */
-		fxp_read_eeprom(sc, &data, 3, 1);
+		data = sc->eeprom[FXP_EEPROM_MAP_COMPAT];
 		if ((data & 0x0400) == 0)
 			sc->flags |= FXP_FLAG_NO_UCODE;
 	}
 
 	/* Receiver lock-up workaround detection. */
 	if (sc->revision < FXP_REV_82558_A4) {
-		fxp_read_eeprom(sc, &data, 3, 1);
+		data = sc->eeprom[FXP_EEPROM_MAP_COMPAT];
 		if ((data & 0x03) != 0x03) {
 			sc->flags |= FXP_FLAG_RXBUG;
 			device_printf(dev, "Enabling Rx lock-up workaround\n");
@@ -549,7 +551,7 @@ fxp_attach(device_t dev)
 	/*
 	 * Determine whether we must use the 503 serial interface.
 	 */
-	fxp_read_eeprom(sc, &data, 6, 1);
+	data = sc->eeprom[FXP_EEPROM_MAP_PRI_PHY];
 	if (sc->revision == FXP_REV_82557 && (data & FXP_PHY_DEVICE_MASK) != 0
 	    && (data & FXP_PHY_SERIAL_ONLY))
 		sc->flags |= FXP_FLAG_SERIAL_MEDIA;
@@ -569,7 +571,7 @@ fxp_attach(device_t dev)
 	 */
 	if ((sc->ident->ich >= 2 && sc->ident->ich <= 3) ||
 	    (sc->ident->ich == 0 && sc->revision >= FXP_REV_82559_A0)) {
-		fxp_read_eeprom(sc, &data, 10, 1);
+		data = sc->eeprom[FXP_EEPROM_MAP_ID];
 		if (data & 0x02) {			/* STB enable */
 			uint16_t cksum;
 			int i;
@@ -577,20 +579,19 @@ fxp_attach(device_t dev)
 			device_printf(dev,
 			    "Disabling dynamic standby mode in EEPROM\n");
 			data &= ~0x02;
-			fxp_write_eeprom(sc, &data, 10, 1);
+			sc->eeprom[FXP_EEPROM_MAP_ID] = data;
+			fxp_write_eeprom(sc, &data, FXP_EEPROM_MAP_ID, 1);
 			device_printf(dev, "New EEPROM ID: 0x%x\n", data);
 			cksum = 0;
-			for (i = 0; i < (1 << sc->eeprom_size) - 1; i++) {
-				fxp_read_eeprom(sc, &data, i, 1);
-				cksum += data;
-			}
+			for (i = 0; i < (1 << sc->eeprom_size) - 1; i++)
+				cksum += sc->eeprom[i];
 			i = (1 << sc->eeprom_size) - 1;
 			cksum = 0xBABA - cksum;
-			fxp_read_eeprom(sc, &data, i, 1);
 			fxp_write_eeprom(sc, &cksum, i, 1);
 			device_printf(dev,
 			    "EEPROM checksum @ 0x%x: 0x%x -> 0x%x\n",
-			    i, data, cksum);
+			    i, sc->eeprom[i], cksum);
+			sc->eeprom[i] = cksum;
 #if 1
 			/*
 			 * If the user elects to continue, try the software
@@ -791,21 +792,20 @@ fxp_attach(device_t dev)
 	/*
 	 * Read MAC address.
 	 */
-	fxp_read_eeprom(sc, myea, 0, 3);
-	eaddr[0] = myea[0] & 0xff;
-	eaddr[1] = myea[0] >> 8;
-	eaddr[2] = myea[1] & 0xff;
-	eaddr[3] = myea[1] >> 8;
-	eaddr[4] = myea[2] & 0xff;
-	eaddr[5] = myea[2] >> 8;
+	eaddr[0] = sc->eeprom[FXP_EEPROM_MAP_IA0] & 0xff;
+	eaddr[1] = sc->eeprom[FXP_EEPROM_MAP_IA0] >> 8;
+	eaddr[2] = sc->eeprom[FXP_EEPROM_MAP_IA1] & 0xff;
+	eaddr[3] = sc->eeprom[FXP_EEPROM_MAP_IA1] >> 8;
+	eaddr[4] = sc->eeprom[FXP_EEPROM_MAP_IA2] & 0xff;
+	eaddr[5] = sc->eeprom[FXP_EEPROM_MAP_IA2] >> 8;
 	if (bootverbose) {
 		device_printf(dev, "PCI IDs: %04x %04x %04x %04x %04x\n",
 		    pci_get_vendor(dev), pci_get_device(dev),
 		    pci_get_subvendor(dev), pci_get_subdevice(dev),
 		    pci_get_revid(dev));
-		fxp_read_eeprom(sc, &data, 10, 1);
 		device_printf(dev, "Dynamic Standby mode is %s\n",
-		    data & 0x02 ? "enabled" : "disabled");
+		    sc->eeprom[FXP_EEPROM_MAP_ID] & 0x02 ? "enabled" :
+		    "disabled");
 	}
 
 	/*
@@ -1301,6 +1301,23 @@ fxp_write_eeprom(struct fxp_softc *sc, u
 		fxp_eeprom_putword(sc, offset + i, data[i]);
 }
 
+static void
+fxp_load_eeprom(struct fxp_softc *sc)
+{
+	int i;
+	uint16_t cksum;
+
+	fxp_read_eeprom(sc, sc->eeprom, 0, 1 << sc->eeprom_size);
+	cksum = 0;
+	for (i = 0; i < (1 << sc->eeprom_size) - 1; i++)
+		cksum += sc->eeprom[i];
+	cksum = 0xBABA - cksum;
+	if (cksum != sc->eeprom[(1 << sc->eeprom_size) - 1])
+		device_printf(sc->dev,
+		    "EEPROM checksum mismatch! (0x%04x -> 0x%04x)\n",
+		    cksum, sc->eeprom[(1 << sc->eeprom_size) - 1]);
+}
+
 /*
  * Grab the softc lock and call the real fxp_start_body() routine
  */

Modified: head/sys/dev/fxp/if_fxpreg.h
==============================================================================
--- head/sys/dev/fxp/if_fxpreg.h	Wed Mar 28 01:08:55 2012	(r233585)
+++ head/sys/dev/fxp/if_fxpreg.h	Wed Mar 28 01:27:27 2012	(r233586)
@@ -448,6 +448,24 @@ struct fxp_stats {
 #define FXP_EEPROM_OPC_READ	0x6
 
 /*
+ * EEPROM map
+ */
+#define	FXP_EEPROM_MAP_IA0	0x00		/* Station address */
+#define	FXP_EEPROM_MAP_IA1	0x01
+#define	FXP_EEPROM_MAP_IA2	0x02
+#define	FXP_EEPROM_MAP_COMPAT	0x03		/* Compatibility */
+#define	FXP_EEPROM_MAP_CNTR	0x05		/* Controller/connector type */
+#define	FXP_EEPROM_MAP_PRI_PHY	0x06		/* Primary PHY record */
+#define	FXP_EEPROM_MAP_SEC_PHY	0x07		/* Secondary PHY record */
+#define	FXP_EEPROM_MAP_PWA0	0x08		/* Printed wire assembly num. */
+#define	FXP_EEPROM_MAP_PWA1	0x09		/* Printed wire assembly num. */
+#define	FXP_EEPROM_MAP_ID	0x0A		/* EEPROM ID */
+#define	FXP_EEPROM_MAP_SUBSYS	0x0B		/* Subsystem ID */
+#define	FXP_EEPROM_MAP_SUBVEN	0x0C		/* Subsystem vendor ID */
+#define	FXP_EEPROM_MAP_CKSUM64	0x3F		/* 64-word EEPROM checksum */
+#define	FXP_EEPROM_MAP_CKSUM256	0xFF		/* 256-word EEPROM checksum */
+
+/*
  * Management Data Interface opcodes
  */
 #define FXP_MDI_WRITE		0x1

Modified: head/sys/dev/fxp/if_fxpvar.h
==============================================================================
--- head/sys/dev/fxp/if_fxpvar.h	Wed Mar 28 01:08:55 2012	(r233585)
+++ head/sys/dev/fxp/if_fxpvar.h	Wed Mar 28 01:27:27 2012	(r233586)
@@ -219,6 +219,7 @@ struct fxp_softc {
 	int if_flags;
 	uint8_t rfa_size;
 	uint32_t tx_cmd;
+	uint16_t eeprom[256];
 };
 
 #define FXP_FLAG_MWI_ENABLE	0x0001	/* MWI enable */


More information about the svn-src-head mailing list