svn commit: r227006 - in head: . sys/amd64/conf sys/conf sys/dev/esp sys/i386/conf sys/modules sys/modules/esp sys/pc98/conf sys/sparc64/conf

Marius Strobl marius at FreeBSD.org
Tue Nov 1 21:26:58 UTC 2011


Author: marius
Date: Tue Nov  1 21:26:57 2011
New Revision: 227006
URL: http://svn.freebsd.org/changeset/base/227006

Log:
  Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and
  replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel
  configuration files. Besides duplicating functionality, amd(4), which
  previously also supported the AMD Am53C974, unlike esp(4) is no longer
  maintained and has accumulated enough bit rot over time to always cause
  a panic during boot as long as at least one target is attached to it
  (see PR 124667).
  
  PR:		124667
  Obtained from:	NetBSD (based on)
  MFC after:	3 days

Added:
  head/sys/dev/esp/am53c974reg.h   (contents, props changed)
  head/sys/dev/esp/esp_pci.c   (contents, props changed)
Modified:
  head/UPDATING
  head/sys/amd64/conf/GENERIC
  head/sys/conf/NOTES
  head/sys/conf/files
  head/sys/i386/conf/GENERIC
  head/sys/modules/Makefile
  head/sys/modules/esp/Makefile
  head/sys/pc98/conf/GENERIC
  head/sys/sparc64/conf/GENERIC

Modified: head/UPDATING
==============================================================================
--- head/UPDATING	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/UPDATING	Tue Nov  1 21:26:57 2011	(r227006)
@@ -22,6 +22,10 @@ NOTE TO PEOPLE WHO THINK THAT FreeBSD 10
 	machines to maximize performance.  (To disable malloc debugging, run
 	ln -s aj /etc/malloc.conf.)
 
+20111101:
+	The broken amd(4) driver has been replaced with esp(4) in the amd64,
+	i386 and pc98 GENERIC kernel configuration files.
+
 20110930:
 	sysinstall has been removed
 

Modified: head/sys/amd64/conf/GENERIC
==============================================================================
--- head/sys/amd64/conf/GENERIC	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/amd64/conf/GENERIC	Tue Nov  1 21:26:57 2011	(r227006)
@@ -107,7 +107,7 @@ options 	AHC_REG_PRETTY_PRINT	# Print re
 device		ahd		# AHA39320/29320 and onboard AIC79xx devices
 options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
 					# output.  Adds ~215k to driver.
-device		amd		# AMD 53C974 (Tekram DC-390(T))
+device		esp		# AMD Am53C974 (Tekram DC-390(T))
 device		hptiop		# Highpoint RocketRaid 3xxx series
 device		isp		# Qlogic family
 #device		ispfw		# Firmware for QLogic HBAs- normally a module

Modified: head/sys/conf/NOTES
==============================================================================
--- head/sys/conf/NOTES	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/conf/NOTES	Tue Nov  1 21:26:57 2011	(r227006)
@@ -1459,7 +1459,9 @@ options 	TEKEN_UTF8		# UTF-8 output hand
 #      such as the Tekram DC-390(T).
 # bt:  Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
 #      BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
-# esp: NCR53c9x.  Only for SBUS hardware right now.
+# esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers
+#      including the AMD Am53C974 (found on devices such as the Tekram
+#      DC-390(T)) and the Sun ESP and FAS families of controllers
 # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
 #      ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
 #      ISP 12160 Ultra3 SCSI,

Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/conf/files	Tue Nov  1 21:26:57 2011	(r227006)
@@ -1064,6 +1064,7 @@ dev/ep/if_ep_eisa.c		optional ep eisa
 dev/ep/if_ep_isa.c		optional ep isa
 dev/ep/if_ep_mca.c		optional ep mca
 dev/ep/if_ep_pccard.c		optional ep pccard
+dev/esp/esp_pci.c		optional esp pci
 dev/esp/ncr53c9x.c		optional esp
 dev/ex/if_ex.c			optional ex
 dev/ex/if_ex_isa.c		optional ex isa

Added: head/sys/dev/esp/am53c974reg.h
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/dev/esp/am53c974reg.h	Tue Nov  1 21:26:57 2011	(r227006)
@@ -0,0 +1,72 @@
+/*	$NetBSD: pcscpreg.h,v 1.2 2008/04/28 20:23:55 martin Exp $	*/
+
+/*-
+ * Copyright (c) 1998 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Izumi Tsutsui.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef _AM53C974_H_
+#define	_AM53C974_H_
+
+/*
+ * Am53c974 DMA engine registers
+ */
+
+#define	DMA_CMD		0x40 		/* Command */
+#define	 DMACMD_RSVD	0xFFFFFF28	/* reserved */
+#define	 DMACMD_DIR	0x00000080	/* Transfer Direction (read:1) */
+#define	 DMACMD_INTE	0x00000040	/* DMA Interrupt Enable	*/
+#define	 DMACMD_MDL	0x00000010	/* Map to Memory Description List */
+#define	 DMACMD_DIAG	0x00000004	/* Diagnostic */
+#define	 DMACMD_CMD	0x00000003	/* Command Code Bit */
+#define	  DMACMD_IDLE	0x00000000	/*  Idle */
+#define	  DMACMD_BLAST	0x00000001	/*  Blast */
+#define	  DMACMD_ABORT	0x00000002	/*  Abort */
+#define	  DMACMD_START	0x00000003	/*  Start */
+
+#define	DMA_STC		0x44		/* Start Transfer Count */
+#define	DMA_SPA		0x48		/* Start Physical Address */
+#define	DMA_WBC		0x4C		/* Working Byte Counter */
+#define	DMA_WAC		0x50		/* Working Address Counter */
+
+#define	DMA_STAT	0x54		/* Status Register */
+#define	 DMASTAT_RSVD	0xFFFFFF80	/* reserved */
+#define	 DMASTAT_PABT	0x00000040	/* PCI master/target Abort */
+#define	 DMASTAT_BCMP	0x00000020	/* BLAST Complete */
+#define	 DMASTAT_SINT	0x00000010	/* SCSI Interrupt */
+#define	 DMASTAT_DONE	0x00000008	/* DMA Transfer Terminated */
+#define	 DMASTAT_ABT	0x00000004	/* DMA Transfer Aborted */
+#define	 DMASTAT_ERR	0x00000002	/* DMA Transfer Error */
+#define	 DMASTAT_PWDN	0x00000001	/* Power Down Indicator */
+
+#define	DMA_SMDLA	0x58	/* Starting Memory Descpritor List Address */
+#define	DMA_WMAC	0x5C	/* Working MDL Counter */
+#define	DMA_SBAC	0x70	/* SCSI Bus and Control */
+
+#endif /* _AM53C974_H_ */

Added: head/sys/dev/esp/esp_pci.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/dev/esp/esp_pci.c	Tue Nov  1 21:26:57 2011	(r227006)
@@ -0,0 +1,654 @@
+/*-
+ * Copyright (c) 2011 Marius Strobl <marius at FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*	$NetBSD: pcscp.c,v 1.45 2010/11/13 13:52:08 uebayasi Exp $	*/
+
+/*-
+ * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
+ * NASA Ames Research Center; Izumi Tsutsui.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * esp_pci.c: device dependent code for AMD Am53c974 (PCscsi-PCI)
+ * written by Izumi Tsutsui <tsutsui at NetBSD.org>
+ *
+ * Technical manual available at
+ * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/19113.pdf
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/endian.h>
+#include <sys/kernel.h>
+#include <sys/lock.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/resource.h>
+#include <sys/rman.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+
+#include <cam/cam.h>
+#include <cam/cam_ccb.h>
+#include <cam/scsi/scsi_all.h>
+
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+
+#include <dev/esp/ncr53c9xreg.h>
+#include <dev/esp/ncr53c9xvar.h>
+
+#include <dev/esp/am53c974reg.h>
+
+#define	PCI_DEVICE_ID_AMD53C974	0x20201022
+
+struct esp_pci_softc {
+	struct ncr53c9x_softc	sc_ncr53c9x;	/* glue to MI code */
+	struct device		*sc_dev;
+
+	struct resource *sc_res[2];
+#define	ESP_PCI_RES_INTR	0
+#define	ESP_PCI_RES_IO		1
+
+	bus_dma_tag_t		sc_pdmat;
+
+	bus_dma_tag_t		sc_xferdmat;	/* DMA tag for transfers */
+	bus_dmamap_t		sc_xferdmam;	/* DMA map for transfers */
+
+	void			*sc_ih;		/* interrupt handler */
+
+	size_t			sc_dmasize;	/* DMA size */
+	void			**sc_dmaaddr;	/* DMA address */
+	size_t			*sc_dmalen;	/* DMA length */
+	int			sc_active;	/* DMA state */
+	int			sc_datain;	/* DMA Data Direction */
+};
+
+static struct resource_spec esp_pci_res_spec[] = {
+	{ SYS_RES_IRQ, 0, RF_SHAREABLE | RF_ACTIVE },	/* ESP_PCI_RES_INTR */
+	{ SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE },	/* ESP_PCI_RES_IO */
+	{ -1, 0 }
+};
+
+#define	READ_DMAREG(sc, reg)						\
+	bus_read_4((sc)->sc_res[ESP_PCI_RES_IO], (reg))
+#define	WRITE_DMAREG(sc, reg, var)					\
+	bus_write_4((sc)->sc_res[ESP_PCI_RES_IO], (reg), (var))
+
+#define	READ_ESPREG(sc, reg)						\
+	bus_read_1((sc)->sc_res[ESP_PCI_RES_IO], (reg) << 2)
+#define	WRITE_ESPREG(sc, reg, val)					\
+	bus_write_1((sc)->sc_res[ESP_PCI_RES_IO], (reg) << 2, (val))
+
+static int	esp_pci_probe(device_t);
+static int	esp_pci_attach(device_t);
+static int	esp_pci_detach(device_t);
+static int	esp_pci_suspend(device_t);
+static int	esp_pci_resume(device_t);
+
+static device_method_t esp_pci_methods[] = {
+	DEVMETHOD(device_probe,		esp_pci_probe),
+	DEVMETHOD(device_attach,	esp_pci_attach),
+	DEVMETHOD(device_detach,	esp_pci_detach),
+	DEVMETHOD(device_suspend,	esp_pci_suspend),
+	DEVMETHOD(device_resume,	esp_pci_resume),
+
+	KOBJMETHOD_END
+};
+
+static driver_t esp_pci_driver = {
+	"esp",
+	esp_pci_methods,
+	sizeof(struct esp_pci_softc)
+};
+
+DRIVER_MODULE(esp, pci, esp_pci_driver, esp_devclass, 0, 0);
+MODULE_DEPEND(esp, pci, 1, 1, 1);
+
+/*
+ * Functions and the switch for the MI code
+ */
+static void	esp_pci_dma_go(struct ncr53c9x_softc *);
+static int	esp_pci_dma_intr(struct ncr53c9x_softc *);
+static int	esp_pci_dma_isactive(struct ncr53c9x_softc *);
+
+static int	esp_pci_dma_isintr(struct ncr53c9x_softc *);
+static void	esp_pci_dma_reset(struct ncr53c9x_softc *);
+static int	esp_pci_dma_setup(struct ncr53c9x_softc *, void **, size_t *,
+		    int, size_t *);
+static void	esp_pci_dma_stop(struct ncr53c9x_softc *);
+static void	esp_pci_write_reg(struct ncr53c9x_softc *, int, uint8_t);
+static uint8_t	esp_pci_read_reg(struct ncr53c9x_softc *, int);
+static void	esp_pci_xfermap(void *arg, bus_dma_segment_t *segs, int nseg,
+		    int error);
+
+static struct ncr53c9x_glue esp_pci_glue = {
+	esp_pci_read_reg,
+	esp_pci_write_reg,
+	esp_pci_dma_isintr,
+	esp_pci_dma_reset,
+	esp_pci_dma_intr,
+	esp_pci_dma_setup,
+	esp_pci_dma_go,
+	esp_pci_dma_stop,
+	esp_pci_dma_isactive,
+};
+
+static int
+esp_pci_probe(device_t dev)
+{
+
+	if (pci_get_devid(dev) == PCI_DEVICE_ID_AMD53C974) {
+		device_set_desc(dev, "AMD Am53C974 Fast-SCSI");
+		return (BUS_PROBE_DEFAULT);
+	}
+
+	return (ENXIO);
+}
+
+/*
+ * Attach this instance, and then all the sub-devices
+ */
+static int
+esp_pci_attach(device_t dev)
+{
+	struct esp_pci_softc *esc;
+	struct ncr53c9x_softc *sc;
+	int error;
+
+	esc = device_get_softc(dev);
+	sc = &esc->sc_ncr53c9x;
+
+	NCR_LOCK_INIT(sc);
+
+	esc->sc_dev = dev;
+	sc->sc_glue = &esp_pci_glue;
+
+	pci_enable_busmaster(dev);
+
+	error = bus_alloc_resources(dev, esp_pci_res_spec, esc->sc_res);
+	if (error != 0) {
+		device_printf(dev, "failed to allocate resources\n");
+		bus_release_resources(dev, esp_pci_res_spec, esc->sc_res);
+		return (error);
+	}
+
+	error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
+	    BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
+	    BUS_SPACE_MAXSIZE_32BIT, BUS_SPACE_UNRESTRICTED,
+	    BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &esc->sc_pdmat);
+	if (error != 0) {
+		device_printf(dev, "cannot create parent DMA tag\n");
+		goto fail_res;
+	}
+
+	/*
+	 * XXX More of this should be in ncr53c9x_attach(), but
+	 * XXX should we really poke around the chip that much in
+	 * XXX the MI code?  Think about this more...
+	 */
+
+	/*
+	 * Set up static configuration info.
+	 *
+	 * XXX we should read the configuration from the EEPROM.
+	 */
+	sc->sc_id = 7;
+	sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
+	sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE;
+	sc->sc_cfg3 = NCRAMDCFG3_IDM | NCRAMDCFG3_FCLK;
+	sc->sc_cfg4 = NCRAMDCFG4_GE12NS | NCRAMDCFG4_RADE;
+	sc->sc_rev = NCR_VARIANT_AM53C974;
+	sc->sc_features = NCR_F_FASTSCSI | NCR_F_DMASELECT;
+	sc->sc_cfg3_fscsi = NCRAMDCFG3_FSCSI;
+	sc->sc_freq = 40; /* MHz */
+
+	/*
+	 * This is the value used to start sync negotiations
+	 * Note that the NCR register "SYNCTP" is programmed
+	 * in "clocks per byte", and has a minimum value of 4.
+	 * The SCSI period used in negotiation is one-fourth
+	 * of the time (in nanoseconds) needed to transfer one byte.
+	 * Since the chip's clock is given in MHz, we have the following
+	 * formula: 4 * period = (1000 / freq) * 4
+	 */
+	sc->sc_minsync = 1000 / sc->sc_freq;
+
+	sc->sc_maxxfer = DFLTPHYS;	/* see below */
+	sc->sc_maxoffset = 15;
+	sc->sc_extended_geom = 1;
+
+#define	MDL_SEG_SIZE	0x1000	/* 4kbyte per segment */
+
+	/*
+	 * Create the DMA tag and map for the data transfers.
+	 *
+	 * Note: given that bus_dma(9) only adheres to the requested alignment
+	 * for the first segment (and that also only for bus_dmamem_alloc()ed
+	 * DMA maps) we can't use the Memory Descriptor List.  However, also
+	 * when not using the MDL, the maximum transfer size apparently is
+	 * limited to 4k so we have to split transfers up, which plain sucks.
+	 */
+	error = bus_dma_tag_create(esc->sc_pdmat, PAGE_SIZE, 0,
+	    BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
+	    MDL_SEG_SIZE, 1, MDL_SEG_SIZE, BUS_DMA_ALLOCNOW,
+	    busdma_lock_mutex, &sc->sc_lock, &esc->sc_xferdmat);
+	if (error != 0) {
+		device_printf(dev, "cannot create transfer DMA tag\n");
+		goto fail_pdmat;
+	}
+	error = bus_dmamap_create(esc->sc_xferdmat, 0, &esc->sc_xferdmam);
+	if (error != 0) {
+		device_printf(dev, "cannnot create transfer DMA map\n");
+		goto fail_xferdmat;
+	}
+
+	error = bus_setup_intr(dev, esc->sc_res[ESP_PCI_RES_INTR],
+	    INTR_MPSAFE | INTR_TYPE_CAM, NULL, ncr53c9x_intr, sc,
+	    &esc->sc_ih);
+	if (error != 0) {
+		device_printf(dev, "cannot set up interrupt\n");
+		goto fail_xferdmam;
+	}
+
+	/* Do the common parts of attachment. */
+	sc->sc_dev = esc->sc_dev;
+	error = ncr53c9x_attach(sc);
+	if (error != 0) {
+		device_printf(esc->sc_dev, "ncr53c9x_attach failed\n");
+		goto fail_intr;
+	}
+
+	return (0);
+
+ fail_intr:
+	 bus_teardown_intr(esc->sc_dev, esc->sc_res[ESP_PCI_RES_INTR],
+	    esc->sc_ih);
+ fail_xferdmam:
+	bus_dmamap_destroy(esc->sc_xferdmat, esc->sc_xferdmam);
+ fail_xferdmat:
+	bus_dma_tag_destroy(esc->sc_xferdmat);
+ fail_pdmat:
+	bus_dma_tag_destroy(esc->sc_pdmat);
+ fail_res:
+	bus_release_resources(dev, esp_pci_res_spec, esc->sc_res);
+	NCR_LOCK_DESTROY(sc);
+
+	return (error);
+}
+
+static int
+esp_pci_detach(device_t dev)
+{
+	struct ncr53c9x_softc *sc;
+	struct esp_pci_softc *esc;
+	int error;
+
+	esc = device_get_softc(dev);
+	sc = &esc->sc_ncr53c9x;
+
+	bus_teardown_intr(esc->sc_dev, esc->sc_res[ESP_PCI_RES_INTR],
+	    esc->sc_ih);
+	error = ncr53c9x_detach(sc);
+	if (error != 0)
+		return (error);
+	bus_dmamap_destroy(esc->sc_xferdmat, esc->sc_xferdmam);
+	bus_dma_tag_destroy(esc->sc_xferdmat);
+	bus_dma_tag_destroy(esc->sc_pdmat);
+	bus_release_resources(dev, esp_pci_res_spec, esc->sc_res);
+	NCR_LOCK_DESTROY(sc);
+
+	return (0);
+}
+
+static int
+esp_pci_suspend(device_t dev)
+{
+
+	return (ENXIO);
+}
+
+static int
+esp_pci_resume(device_t dev)
+{
+
+	return (ENXIO);
+}
+
+static void
+esp_pci_xfermap(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)arg;
+
+	if (error != 0)
+		return;
+
+	KASSERT(nsegs == 1, ("%s: bad transfer segment count %d", __func__,
+	    nsegs));
+	KASSERT(segs[0].ds_len <= MDL_SEG_SIZE,
+	    ("%s: bad transfer segment length %ld", __func__,
+	    (long)segs[0].ds_len));
+
+	/* Program the DMA Starting Physical Address. */
+	WRITE_DMAREG(esc, DMA_SPA, segs[0].ds_addr);
+}
+
+/*
+ * Glue functions
+ */
+
+static uint8_t
+esp_pci_read_reg(struct ncr53c9x_softc *sc, int reg)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	return (READ_ESPREG(esc, reg));
+}
+
+static void
+esp_pci_write_reg(struct ncr53c9x_softc *sc, int reg, uint8_t v)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	WRITE_ESPREG(esc, reg, v);
+}
+
+static int
+esp_pci_dma_isintr(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	return (READ_ESPREG(esc, NCR_STAT) & NCRSTAT_INT) != 0;
+}
+
+static void
+esp_pci_dma_reset(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE);
+
+	esc->sc_active = 0;
+}
+
+static int
+esp_pci_dma_intr(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+	bus_dma_tag_t xferdmat;
+	bus_dmamap_t xferdmam;
+	size_t dmasize;
+	int datain, i, resid, trans;
+	uint32_t dmastat;
+	char *p = NULL;
+
+	xferdmat = esc->sc_xferdmat;
+	xferdmam = esc->sc_xferdmam;
+	datain = esc->sc_datain;
+
+	dmastat = READ_DMAREG(esc, DMA_STAT);
+
+	if ((dmastat & DMASTAT_ERR) != 0) {
+		/* XXX not tested... */
+		WRITE_DMAREG(esc, DMA_CMD, DMACMD_ABORT | (datain != 0 ?
+		    DMACMD_DIR : 0));
+
+		device_printf(esc->sc_dev, "DMA error detected; Aborting.\n");
+		bus_dmamap_sync(xferdmat, xferdmam, datain != 0 ?
+		    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_unload(xferdmat, xferdmam);
+		return (-1);
+	}
+
+	if ((dmastat & DMASTAT_ABT) != 0) {
+		/* XXX what should be done? */
+		device_printf(esc->sc_dev, "DMA aborted.\n");
+		WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ?
+		    DMACMD_DIR : 0));
+		esc->sc_active = 0;
+		return (0);
+	}
+
+	KASSERT(esc->sc_active != 0, ("%s: DMA wasn't active", __func__));
+
+	/* DMA has stopped. */
+
+	esc->sc_active = 0;
+
+	dmasize = esc->sc_dmasize;
+	if (dmasize == 0) {
+		/* A "Transfer Pad" operation completed. */
+		NCR_DMA(("%s: discarded %d bytes (tcl=%d, tcm=%d)\n",
+		    __func__, READ_ESPREG(esc, NCR_TCL) |
+		    (READ_ESPREG(esc, NCR_TCM) << 8),
+		    READ_ESPREG(esc, NCR_TCL), READ_ESPREG(esc, NCR_TCM)));
+		return (0);
+	}
+
+	resid = 0;
+	/*
+	 * If a transfer onto the SCSI bus gets interrupted by the device
+	 * (e.g. for a SAVEPOINTER message), the data in the FIFO counts
+	 * as residual since the ESP counter registers get decremented as
+	 * bytes are clocked into the FIFO.
+	 */
+	if (datain == 0 &&
+	    (resid = (READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF)) != 0)
+		NCR_DMA(("%s: empty esp FIFO of %d ", __func__, resid));
+
+	if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
+		/*
+		 * "Terminal count" is off, so read the residue
+		 * out of the ESP counter registers.
+		 */
+		if (datain != 0) {
+			resid = READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF;
+			while (resid > 1)
+				resid =
+				    READ_ESPREG(esc, NCR_FFLAG) & NCRFIFO_FF;
+			WRITE_DMAREG(esc, DMA_CMD, DMACMD_BLAST | DMACMD_DIR);
+
+			for (i = 0; i < 0x8000; i++) /* XXX 0x8000 ? */
+				if ((READ_DMAREG(esc, DMA_STAT) &
+				    DMASTAT_BCMP) != 0)
+					break;
+
+			/* See the below comments... */
+			if (resid != 0)
+				p = *esc->sc_dmaaddr;
+		}
+
+		resid += READ_ESPREG(esc, NCR_TCL) |
+		    (READ_ESPREG(esc, NCR_TCM) << 8) |
+		    (READ_ESPREG(esc, NCR_TCH) << 16);
+	} else
+		while ((dmastat & DMASTAT_DONE) == 0)
+			dmastat = READ_DMAREG(esc, DMA_STAT);
+
+	WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ?
+	    DMACMD_DIR : 0));
+
+	/* Sync the transfer buffer. */
+	bus_dmamap_sync(xferdmat, xferdmam, datain != 0 ?
+	    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
+	bus_dmamap_unload(xferdmat, xferdmam);
+
+	trans = dmasize - resid;
+
+	/*
+	 * From the technical manual notes:
+	 *
+	 * "In some odd byte conditions, one residual byte will be left
+	 *  in the SCSI FIFO, and the FIFO flags will never count to 0.
+	 *  When this happens, the residual byte should be retrieved
+	 *  via PIO following completion of the BLAST operation."
+	 */
+	if (p != NULL) {
+		p += trans;
+		*p = READ_ESPREG(esc, NCR_FIFO);
+		trans++;
+	}
+
+	if (trans < 0) {			/* transferred < 0 ? */
+#if 0
+		/*
+		 * This situation can happen in perfectly normal operation
+		 * if the ESP is reselected while using DMA to select
+		 * another target.  As such, don't print the warning.
+		 */
+		device_printf(dev, "xfer (%d) > req (%d)\n", trans, dmasize);
+#endif
+		trans = dmasize;
+	}
+
+	NCR_DMA(("%s: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n", __func__,
+	    READ_ESPREG(esc, NCR_TCL), READ_ESPREG(esc, NCR_TCM),
+	    READ_ESPREG(esc, NCR_TCH), trans, resid));
+
+	*esc->sc_dmalen -= trans;
+	*esc->sc_dmaaddr = (char *)*esc->sc_dmaaddr + trans;
+
+	return (0);
+}
+
+static int
+esp_pci_dma_setup(struct ncr53c9x_softc *sc, void **addr, size_t *len,
+    int datain, size_t *dmasize)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+	int error;
+
+	WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain != 0 ? DMACMD_DIR :
+	    0));
+
+	*dmasize = esc->sc_dmasize = ulmin(*dmasize, MDL_SEG_SIZE);
+	esc->sc_dmaaddr = addr;
+	esc->sc_dmalen = len;
+	esc->sc_datain = datain;
+
+	/*
+	 * There's no need to set up DMA for a "Transfer Pad" operation.
+	 */
+	if (*dmasize == 0)
+		return (0);
+
+	/* Set the transfer length. */
+	WRITE_DMAREG(esc, DMA_STC, *dmasize);
+
+	/*
+	 * Load the transfer buffer and program the DMA address.
+	 * Note that the NCR53C9x core can't handle EINPROGRESS so we set
+	 * BUS_DMA_NOWAIT.
+	 */
+	error = bus_dmamap_load(esc->sc_xferdmat, esc->sc_xferdmam,
+	    *esc->sc_dmaaddr, *dmasize, esp_pci_xfermap, sc, BUS_DMA_NOWAIT);
+
+	return (error);
+}
+
+static void
+esp_pci_dma_go(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+	int datain;
+
+	datain = esc->sc_datain;
+
+	/* No DMA transfer for a "Transfer Pad" operation */
+	if (esc->sc_dmasize == 0)
+		return;
+
+	/* Sync the transfer buffer. */
+	bus_dmamap_sync(esc->sc_xferdmat, esc->sc_xferdmam, datain != 0 ?
+	    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
+
+	/* Set the DMA engine to the IDLE state. */
+	/* XXX DMA Transfer Interrupt Enable bit is broken? */
+	WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | /* DMACMD_INTE | */
+	    (datain != 0 ? DMACMD_DIR : 0));
+
+	/* Issue a DMA start command. */
+	WRITE_DMAREG(esc, DMA_CMD, DMACMD_START | /* DMACMD_INTE | */
+	    (datain != 0 ? DMACMD_DIR : 0));
+
+	esc->sc_active = 1;
+}
+
+static void
+esp_pci_dma_stop(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	/* DMA stop */
+	/* XXX what should we do here ? */
+	WRITE_DMAREG(esc, DMA_CMD,
+	    DMACMD_ABORT | (esc->sc_datain != 0 ? DMACMD_DIR : 0));
+	bus_dmamap_unload(esc->sc_xferdmat, esc->sc_xferdmam);
+
+	esc->sc_active = 0;
+}
+
+static int
+esp_pci_dma_isactive(struct ncr53c9x_softc *sc)
+{
+	struct esp_pci_softc *esc = (struct esp_pci_softc *)sc;
+
+	/* XXX should we check esc->sc_active? */
+	if ((READ_DMAREG(esc, DMA_CMD) & DMACMD_CMD) != DMACMD_IDLE)
+		return (1);
+
+	return (0);
+}

Modified: head/sys/i386/conf/GENERIC
==============================================================================
--- head/sys/i386/conf/GENERIC	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/i386/conf/GENERIC	Tue Nov  1 21:26:57 2011	(r227006)
@@ -110,7 +110,7 @@ options 	AHC_REG_PRETTY_PRINT	# Print re
 device		ahd		# AHA39320/29320 and onboard AIC79xx devices
 options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
 					# output.  Adds ~215k to driver.
-device		amd		# AMD 53C974 (Tekram DC-390(T))
+device		esp		# AMD Am53C974 (Tekram DC-390(T))
 device		hptiop		# Highpoint RocketRaid 3xxx series
 device		isp		# Qlogic family
 #device		ispfw		# Firmware for QLogic HBAs- normally a module

Modified: head/sys/modules/Makefile
==============================================================================
--- head/sys/modules/Makefile	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/modules/Makefile	Tue Nov  1 21:26:57 2011	(r227006)
@@ -89,6 +89,7 @@ SUBDIR=	${_3dfx} \
 	en \
 	${_ep} \
 	${_epic} \
+	esp \
 	${_et} \
 	${_ex} \
 	${_exca} \

Modified: head/sys/modules/esp/Makefile
==============================================================================
--- head/sys/modules/esp/Makefile	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/modules/esp/Makefile	Tue Nov  1 21:26:57 2011	(r227006)
@@ -3,7 +3,8 @@
 .PATH: ${.CURDIR}/../../dev/esp
 
 KMOD=	esp
-SRCS=	device_if.h ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if} opt_cam.h
+SRCS=	device_if.h esp_pci.c ${esp_sbus} bus_if.h ncr53c9x.c ${ofw_bus_if}
+SRCS+=	opt_cam.h pci_if.h
 
 .if ${MACHINE} == "sparc64"
 ofw_bus_if=	ofw_bus_if.h

Modified: head/sys/pc98/conf/GENERIC
==============================================================================
--- head/sys/pc98/conf/GENERIC	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/pc98/conf/GENERIC	Tue Nov  1 21:26:57 2011	(r227006)
@@ -101,7 +101,7 @@ device		siis		# SiliconImage SiI3124/SiI
 # SCSI Controllers
 device		adv		# Advansys SCSI adapters
 device		ahc		# AHA2940 and onboard AIC7xxx devices
-device		amd		# AMD 53C974 (Tekram DC-390(T))
+device		esp		# AMD Am53C974 (Tekram DC-390(T))
 device		isp		# Qlogic family
 #device		ncr		# NCR/Symbios Logic
 device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')

Modified: head/sys/sparc64/conf/GENERIC
==============================================================================
--- head/sys/sparc64/conf/GENERIC	Tue Nov  1 21:21:36 2011	(r227005)
+++ head/sys/sparc64/conf/GENERIC	Tue Nov  1 21:26:57 2011	(r227006)
@@ -103,11 +103,11 @@ device		ahc		# AHA2940 and onboard AIC7x
 options 	AHC_ALLOW_MEMIO	# Attempt to use memory mapped I/O
 options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
 					# output.  Adds ~128k to driver.
+device		esp		# AMD Am53C974, Sun ESP and FAS	families
 device		isp		# Qlogic family
 device		ispfw		# Firmware module for Qlogic host adapters
 device		mpt		# LSI-Logic MPT-Fusion
 device		sym		# NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D
-device		esp		# NCR53c9x (FEPS/FAS366)
 
 # ATA/SCSI peripherals
 device		scbus		# SCSI bus (required for ATA/SCSI)


More information about the svn-src-head mailing list