svn commit: r215334 - in head: share/doc/papers/jail
share/doc/smm/01.setup share/man/man8 sys/dev/firewire
sys/dev/tdfx usr.sbin/config/SMM.doc
Doug Barton
dougb at FreeBSD.org
Mon Nov 15 05:25:52 UTC 2010
Author: dougb
Date: Mon Nov 15 05:25:51 2010
New Revision: 215334
URL: http://svn.freebsd.org/changeset/base/215334
Log:
Remove references to MAKEDEV(8)
Deleted:
head/share/man/man8/MAKEDEV.8
Modified:
head/share/doc/papers/jail/mgt.ms
head/share/doc/smm/01.setup/2.t
head/share/doc/smm/01.setup/4.t
head/share/doc/smm/01.setup/5.t
head/share/doc/smm/01.setup/spell.ok
head/share/man/man8/Makefile
head/sys/dev/firewire/00README
head/sys/dev/tdfx/tdfx_pci.c
head/usr.sbin/config/SMM.doc/6.t
head/usr.sbin/config/SMM.doc/spell.ok
Modified: head/share/doc/papers/jail/mgt.ms
==============================================================================
--- head/share/doc/papers/jail/mgt.ms Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/doc/papers/jail/mgt.ms Mon Nov 15 05:25:51 2010 (r215334)
@@ -56,8 +56,6 @@ FreeBSD build environment.
.PP
One notable difference from the default FreeBSD install is that only
a limited set of device nodes should be created.
-MAKEDEV(8) has been modified to accept a ``jail'' argument that creates
-the correct set of nodes.
.PP
To improve storage efficiency, a fair number of the binaries in the system tree
may be deleted, as they are not relevant in a jail environment.
Modified: head/share/doc/smm/01.setup/2.t
==============================================================================
--- head/share/doc/smm/01.setup/2.t Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/doc/smm/01.setup/2.t Mon Nov 15 05:25:51 2010 (r215334)
@@ -482,13 +482,7 @@ lw(2i) l.
\fB#\fP \fImount_mfs -s 1000 -T type /dev/null /tmp\fP (create a writable filesystem)
(\fItype\fP is the disk type as determined from /etc/disktab)
\fB#\fP \fIcd /tmp\fP (connect to that directory)
-\fB#\fP \fI../dev/MAKEDEV \*(Dk#\fP (create special files for root disk)
-(\fI\*(Dk\fP is the disk type, \fI#\fP is the unit number)
-(ignore warning from ``sh'')
\fB#\fP \fImount \-uw /tmp/\*(Dk#a /\fP (read-write mount root filesystem)
-\fB#\fP \fIcd /dev\fP (go to device directory)
-\fB#\fP \fI./MAKEDEV \*(Dk#\fP (create permanent special files for root disk)
-(again, ignore warning from ``sh'')
.TE
.DE
.Sh 4 "Step 4: (optional) restoring the root filesystem"
@@ -513,8 +507,6 @@ To really create the root filesystem on
you should first label the disk as described in step 5 below.
Then run the following commands:
.DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fI./MAKEDEV \*(Dk1a\fP
\fB#\fP\|\fInewfs /dev/r\*(Dk1a\fP
\fB#\fP\|\fImount /dev/\*(Dk1a /mnt\fP
\fB#\fP\|\fIcd /mnt\fP
@@ -1393,8 +1385,6 @@ To make the
.Pn /var
filesystem we would do:
.DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fIMAKEDEV \*(Dk1\fP
\fB#\fP \fIdisklabel -wr \*(Dk1 "disk type" "disk name"\fP
\fB#\fP \fInewfs \*(Dk1f\fP
(information about filesystem prints out)
Modified: head/share/doc/smm/01.setup/4.t
==============================================================================
--- head/share/doc/smm/01.setup/4.t Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/doc/smm/01.setup/4.t Mon Nov 15 05:25:51 2010 (r215334)
@@ -30,6 +30,7 @@
.\" SUCH DAMAGE.
.\"
.\" @(#)4.t 8.1 (Berkeley) 7/29/93
+.\" $FreeBSD$
.\"
.ds LH "Installing/Operating \*(4B
.ds CF \*(Dy
@@ -152,38 +153,11 @@ directory.
For all the devices supported by the distribution system, the
files in
.Pn /dev
-are created by the
-.Pn /dev/MAKEDEV
-shell script.
+are created by devfs.
.PP
Determine the set of devices that you have and create a new
.Pn /dev
-directory by running the MAKEDEV script.
-First create a new directory
-.Pn /newdev ,
-copy MAKEDEV into it, edit the file MAKEDEV.local
-to provide an entry for local needs,
-and run it to generate a
-.Pn /newdev directory.
-For instance,
-.DS
-\fB#\fP \fIcd /\fP
-\fB#\fP \fImkdir newdev\fP
-\fB#\fP \fIcp dev/MAKEDEV newdev/MAKEDEV\fP
-\fB#\fP \fIcd newdev\fP
-\fB#\fP \fIMAKEDEV \*(Dk0 pt0 std LOCAL\fP
-.DE
-Note the ``std'' argument causes standard devices such as
-.Pn /dev/console ,
-the machine console, to be created.
-.PP
-You can then do
-.DS
-\fB#\fP \fIcd /\fP
-\fB#\fP \fImv dev olddev ; mv newdev dev\fP
-\fB#\fP \fIsync\fP
-.DE
-to install the new device directory.
+directory by mounting devfs.
.Sh 3 "Building new system images"
.PP
The kernel configuration of each UNIX system is described by
@@ -232,8 +206,8 @@ the file
must be edited.
.PP
To add a new terminal device, be sure the device is configured into the system
-and that the special files for the device have been made by
-.Pn /dev/MAKEDEV .
+and that the special files for the device exist in
+.Pn /dev .
Then, enable the appropriate lines of
.Pn /etc/ttys
by setting the ``status''
@@ -335,9 +309,6 @@ Finally note that you should change the
terminals to ttyd?
where ? is in [0-9a-zA-Z], as some programs use this property of the
names to determine if a terminal is a dialup.
-Shell commands to do this should be put in the
-.Pn /dev/MAKEDEV.local
-script.
.PP
While it is possible to use truly arbitrary strings for terminal names,
the accounting and noticeably the
Modified: head/share/doc/smm/01.setup/5.t
==============================================================================
--- head/share/doc/smm/01.setup/5.t Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/doc/smm/01.setup/5.t Mon Nov 15 05:25:51 2010 (r215334)
@@ -30,6 +30,7 @@
.\" SUCH DAMAGE.
.\"
.\" @(#)5.t 8.1 (Berkeley) 7/27/93
+.\" $FreeBSD$
.\"
.ds lq ``
.ds rq ''
@@ -111,35 +112,6 @@ translations for machines that do not pa
command.
Additional information is provided in the manual page describing
.Xr ESIS (4).
-.PP
-To use the pseudo terminals just configured, device
-entries must be created in the
-.Pn /dev
-directory. To create 32
-pseudo terminals (plenty, unless you have a heavy network load)
-execute the following commands.
-.DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fIMAKEDEV pty0 pty1\fP
-.DE
-More pseudo terminals may be made by specifying
-.Pn pty2 ,
-.Pn pty3 ,
-etc. The kernel normally includes support for 32 pseudo terminals
-unless the configuration file specifies a different number.
-Each pseudo terminal really consists of two files in
-.Pn /dev :
-a master and a slave. The master pseudo terminal file is named
-.Pn /dev/ptyp? ,
-while the slave side is
-.Pn /dev/ttyp? .
-Pseudo terminals are also used by several programs not related to the network.
-In addition to creating the pseudo terminals,
-be sure to install them in the
-.Pn /etc/ttys
-file (with a `none' in the second column so no
-.Xr getty
-is started).
.Sh 2 "Local subnets"
.PP
In \*(4B the Internet support
Modified: head/share/doc/smm/01.setup/spell.ok
==============================================================================
--- head/share/doc/smm/01.setup/spell.ok Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/doc/smm/01.setup/spell.ok Mon Nov 15 05:25:51 2010 (r215334)
@@ -1,3 +1,4 @@
+# $FreeBSD$
A1096A
AA
ACU
@@ -91,7 +92,6 @@ LK201
LOGFILE
Leffler
Luna
-MAKEDEV.local
MB
MC68040
MFS
Modified: head/share/man/man8/Makefile
==============================================================================
--- head/share/man/man8/Makefile Mon Nov 15 03:13:36 2010 (r215333)
+++ head/share/man/man8/Makefile Mon Nov 15 05:25:51 2010 (r215334)
@@ -4,7 +4,6 @@
MAN= crash.8 \
diskless.8 \
intro.8 \
- MAKEDEV.8 \
nanobsd.8 \
picobsd.8 \
rc.8 \
Modified: head/sys/dev/firewire/00README
==============================================================================
--- head/sys/dev/firewire/00README Mon Nov 15 03:13:36 2010 (r215333)
+++ head/sys/dev/firewire/00README Mon Nov 15 05:25:51 2010 (r215334)
@@ -44,10 +44,6 @@ IEEE 1394 support for FreeBSD-5.X and 4.
- make install
- make load
- For FreeBSD-4 user:
-
- - ./MAKEDEV
-
3. SBP-II support (sbp)
- You need CAM(SCSI) support in your kernel.
Modified: head/sys/dev/tdfx/tdfx_pci.c
==============================================================================
--- head/sys/dev/tdfx/tdfx_pci.c Mon Nov 15 03:13:36 2010 (r215333)
+++ head/sys/dev/tdfx/tdfx_pci.c Mon Nov 15 05:25:51 2010 (r215334)
@@ -250,7 +250,7 @@ tdfx_attach(device_t dev) {
/*
* make_dev registers the cdev to access the 3dfx card from /dev
* use hex here for the dev num, simply to provide better support if > 10
- * voodoo cards, for the mad. The user must set the link, or use MAKEDEV.
+ * voodoo cards, for the mad. The user must set the link.
* Why would we want that many voodoo cards anyhow?
*/
tdfx_info->devt = make_dev(&tdfx_cdev, device_get_unit(dev),
Modified: head/usr.sbin/config/SMM.doc/6.t
==============================================================================
--- head/usr.sbin/config/SMM.doc/6.t Mon Nov 15 03:13:36 2010 (r215333)
+++ head/usr.sbin/config/SMM.doc/6.t Mon Nov 15 05:25:51 2010 (r215334)
@@ -30,6 +30,7 @@
.\" SUCH DAMAGE.
.\"
.\" @(#)6.t 8.1 (Berkeley) 6/8/93
+.\" $FreeBSD$
.\"
.\".ds RH "Adding New Devices
.ne 2i
@@ -230,10 +231,3 @@ Remember that the position in the
device table specifies the major device number.
The block major number is needed in the ``devices.machine'' file
if the device is a disk.
-.PP
-With the configuration information in place, your configuration
-file appropriately modified, and a system reconfigured and rebooted
-you should incorporate the shell commands needed to install the special
-files in the file system to the file ``/dev/MAKEDEV'' or
-``/dev/MAKEDEV.local''. This is discussed in the document ``Installing
-and Operating 4.4BSD''.
Modified: head/usr.sbin/config/SMM.doc/spell.ok
==============================================================================
--- head/usr.sbin/config/SMM.doc/spell.ok Mon Nov 15 03:13:36 2010 (r215333)
+++ head/usr.sbin/config/SMM.doc/spell.ok Mon Nov 15 05:25:51 2010 (r215334)
@@ -1,3 +1,4 @@
+# $FreeBSD$
ACC
ANSEL
ARP
@@ -38,8 +39,6 @@ Info
Karels
LH
Leffler
-MAKEDEV
-MAKEDEV.local
MASSBUS
MAXDSIZ
MAXTSIZ
More information about the svn-src-head
mailing list