svn commit: r211763 - head/usr.sbin/acpi/acpiconf

[Alexander Motin]

Author: mav
Date: Tue Aug 24 18:07:59 2010
New Revision: 211763
URL: http://svn.freebsd.org/changeset/base/211763

Log:
  When ACPI reports current battery consumption rate in mAmps, print it also
  in mWatts. Values in mAmps are not always suitable, because they depend on
  battery voltage, which depends on battery type and charge level.

Modified:
  head/usr.sbin/acpi/acpiconf/acpiconf.c

Modified: head/usr.sbin/acpi/acpiconf/acpiconf.c
==============================================================================
--- head/usr.sbin/acpi/acpiconf/acpiconf.c	Tue Aug 24 17:48:22 2010	(r211762)
+++ head/usr.sbin/acpi/acpiconf/acpiconf.c	Tue Aug 24 18:07:59 2010	(r211763)
@@ -86,7 +86,8 @@ acpi_battinfo(int num)
 {
 	union acpi_battery_ioctl_arg battio;
 	const char *pwr_units;
-	int hours, min;
+	int hours, min, amp;
+	uint32_t volt;
 
 	if (num < 0 || num > 64)
 		err(EX_USAGE, "invalid battery %d", num);
@@ -95,11 +96,8 @@ acpi_battinfo(int num)
 	battio.unit = num;
 	if (ioctl(acpifd, ACPIIO_BATT_GET_BIF, &battio) == -1)
 		err(EX_IOERR, "get battery info (%d) failed", num);
-	if (battio.bif.units == 0)
-		pwr_units = "mW";
-	else
-		pwr_units = "mA";
-
+	amp = battio.bif.units;
+	pwr_units = amp ? "mA" : "mW";
 	if (battio.bif.dcap == UNKNOWN_CAP)
 		printf("Design capacity:\tunknown\n");
 	else
@@ -125,6 +123,14 @@ acpi_battinfo(int num)
 	printf("Type:\t\t\t%s\n", battio.bif.type);
 	printf("OEM info:\t\t%s\n", battio.bif.oeminfo);
 
+	/* Fetch battery voltage information. */
+	volt = UNKNOWN_VOLTAGE;
+	battio.unit = num;
+	if (ioctl(acpifd, ACPIIO_BATT_GET_BST, &battio) == -1)
+		err(EX_IOERR, "get battery status (%d) failed", num);
+	if (battio.bst.state != ACPI_BATT_STAT_NOT_PRESENT)
+		volt = battio.bst.volt;
+
 	/* Print current battery state information. */
 	battio.unit = num;
 	if (ioctl(acpifd, ACPIIO_BATT_GET_BATTINFO, &battio) == -1)
@@ -154,22 +160,21 @@ acpi_battinfo(int num)
 		}
 		if (battio.battinfo.rate == -1)
 			printf("Present rate:\t\tunknown\n");
-		else
+		else if (amp && volt != UNKNOWN_VOLTAGE) {
+			printf("Present rate:\t\t%d mA (%d mW)\n",
+			    battio.battinfo.rate,
+			    battio.battinfo.rate * volt / 1000);
+		} else
 			printf("Present rate:\t\t%d %s\n",
 			    battio.battinfo.rate, pwr_units);
 	} else
 		printf("State:\t\t\tnot present\n");
 
 	/* Print battery voltage information. */
-	battio.unit = num;
-	if (ioctl(acpifd, ACPIIO_BATT_GET_BST, &battio) == -1)
-		err(EX_IOERR, "get battery status (%d) failed", num);
-	if (battio.bst.state != ACPI_BATT_STAT_NOT_PRESENT) {
-		if (battio.bst.volt == UNKNOWN_VOLTAGE)
-			printf("Voltage:\t\tunknown\n");
-		else
-			printf("Voltage:\t\t%d mV\n", battio.bst.volt);
-	}
+	if (volt == UNKNOWN_VOLTAGE)
+		printf("Present voltage:\tunknown\n");
+	else
+		printf("Present voltage:\t%d mV\n", volt);
 
 	return (0);
 }