svn commit: r188633 - head/usr.sbin/dumpcis
Warner Losh
imp at FreeBSD.org
Sat Feb 14 19:21:38 PST 2009
Author: imp
Date: Sun Feb 15 03:21:37 2009
New Revision: 188633
URL: http://svn.freebsd.org/changeset/base/188633
Log:
Move sys/pccard/*.h here.
Added:
head/usr.sbin/dumpcis/cardinfo.h (props changed)
- copied unchanged from r188632, head/sys/pccard/cardinfo.h
head/usr.sbin/dumpcis/cis.h (props changed)
- copied unchanged from r188632, head/sys/pccard/cis.h
Modified:
head/usr.sbin/dumpcis/printcis.c
head/usr.sbin/dumpcis/readcis.c
Copied: head/usr.sbin/dumpcis/cardinfo.h (from r188632, head/sys/pccard/cardinfo.h)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/usr.sbin/dumpcis/cardinfo.h Sun Feb 15 03:21:37 2009 (r188633, copy of r188632, head/sys/pccard/cardinfo.h)
@@ -0,0 +1,205 @@
+/*
+ * Include file for PCMCIA user process interface
+ *
+ *-------------------------------------------------------------------------
+ */
+/*-
+ * Copyright (c) 1995 Andrew McRae. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef _PCCARD_CARDINFO_H_
+#define _PCCARD_CARDINFO_H_
+
+#ifndef _KERNEL
+#include <sys/types.h>
+#endif
+#include <sys/ioccom.h>
+
+#define PIOCGSTATE _IOR('P', 1, struct slotstate) /* Get slot state */
+#define PIOCGMEM _IOWR('P', 2, struct mem_desc) /* Get memory map */
+#define PIOCSMEM _IOW('P', 3, struct mem_desc) /* Set memory map */
+#define PIOCGIO _IOWR('P', 4, struct io_desc) /* Get I/O map */
+#define PIOCSIO _IOW('P', 5, struct io_desc) /* Set I/O map */
+#define PIOCSDRV _IOWR('P', 6, struct dev_desc) /* Set driver */
+#define PIOCRWFLAG _IOW('P', 7, int) /* Set flags for drv use */
+#define PIOCRWMEM _IOWR('P', 8, unsigned long) /* Set mem for drv use */
+#define PIOCSPOW _IOW('P', 9, struct power) /* Set power structure */
+#define PIOCSVIR _IOW('P', 10, int) /* Virtual insert/remove */
+#define PIOCSBEEP _IOW('P', 11, int) /* Select Beep */
+#define PIOCSRESOURCE _IOWR('P', 12, struct pccard_resource) /* get resource info */
+/*
+ * Debug codes.
+ */
+#define PIOCGREG _IOWR('P',100, struct pcic_reg) /* get reg */
+#define PIOCSREG _IOW('P', 101, struct pcic_reg) /* Set reg */
+
+/*
+ * Slot states for PIOCGSTATE
+ *
+ * Here's a state diagram of all the possible states:
+ *
+ * power x 1
+ * -------------------
+ * / \
+ * / v
+ * resume +----------+ power x 0 +----------+
+ * ------->| inactive |<--------------| filled |
+ * / +----------+ +----------+
+ * / / \ ^ |
+ * nil <--------- \ insert or | | suspend or
+ * suspend \ power x 1 | | eject
+ * \ | v
+ * \ +----------+
+ * ----------->| empty |
+ * eject +----------+
+ *
+ * Note, the above diagram is for the state. On suspend, the laststate
+ * gets set to suspend to tell pccardd what happened. Also the nil state
+ * means that when the no state change has happened. Note: if you eject
+ * while suspended in the inactive state, you will return to the
+ * empty state if you do not insert a new card and to the inactive state
+ * if you do insert a new card.
+ *
+ * Some might argue that inactive should be sticky forever and
+ * eject/insert shouldn't take it out of that state. They might be
+ * right. On the other hand, some would argue that eject resets all
+ * state. They might be right. They both can't be right. The above
+ * represents a reasonable compromise between the two.
+ *
+ * Some bridges allow one to query to see if the card was changed while
+ * we were suspended. Others do not. We make no use of this functionality
+ * at this time.
+ */
+enum cardstate { noslot, empty, suspend, filled, inactive };
+
+/*
+ * Descriptor structure for memory map.
+ */
+struct mem_desc {
+ int window; /* Memory map window number (0-4) */
+ int flags; /* Flags - see below */
+ caddr_t start; /* System memory start */
+ int size; /* Size of memory area */
+ unsigned long card; /* Card memory address */
+};
+
+#define MDF_16BITS 0x01 /* Memory is 16 bits wide */
+#define MDF_ZEROWS 0x02 /* Set no wait states for memory */
+#define MDF_WS0 0x04 /* Wait state flags */
+#define MDF_WS1 0x08
+#define MDF_ATTR 0x10 /* Memory is attribute memory */
+#define MDF_WP 0x20 /* Write protect memory */
+#define MDF_ACTIVE 0x40 /* Context active (read-only) */
+
+/*
+ * Descriptor structure for I/O map
+ */
+struct io_desc {
+ int window; /* I/O map number (0-1) */
+ int flags; /* Flags - see below */
+ int start; /* I/O port start */
+ int size; /* Number of port addresses */
+};
+
+#define IODF_WS 0x01 /* Set wait states for 16 bit I/O access */
+#define IODF_16BIT 0x02 /* I/O access are 16 bit */
+#define IODF_CS16 0x04 /* Allow card selection of 16 bit access */
+#define IODF_ZEROWS 0x08 /* No wait states for 8 bit I/O */
+#define IODF_ACTIVE 0x10 /* Context active (read-only) */
+
+/*
+ * Device descriptor for allocation of driver.
+ */
+#define DEV_MISC_LEN 36
+#define DEV_MAX_CIS_LEN 40
+struct dev_desc {
+ char name[16]; /* Driver name */
+ int unit; /* Driver unit number */
+ unsigned long mem; /* Memory address of driver */
+ int memsize; /* Memory size (if used) */
+ int iobase; /* base of I/O ports */
+ int iosize; /* Length of I/O ports */
+ int irqmask; /* Interrupt number(s) to allocate */
+ int flags; /* Device flags */
+ uint8_t misc[DEV_MISC_LEN]; /* For any random info */
+ uint8_t manufstr[DEV_MAX_CIS_LEN];
+ uint8_t versstr[DEV_MAX_CIS_LEN];
+ uint8_t cis3str[DEV_MAX_CIS_LEN];
+ uint8_t cis4str[DEV_MAX_CIS_LEN];
+ uint32_t manufacturer; /* Manufacturer ID */
+ uint32_t product; /* Product ID */
+ uint32_t prodext; /* Product ID (extended) */
+};
+#define DEV_DESC_HAS_SIZE 1
+
+struct pcic_reg {
+ unsigned char reg;
+ unsigned char value;
+};
+
+/*
+ * Slot information. Used to read current status of slot.
+ */
+struct slotstate {
+ enum cardstate state; /* Current state of slot */
+ enum cardstate laststate; /* Previous state of slot */
+ int maxmem; /* Max allowed memory windows */
+ int maxio; /* Max allowed I/O windows */
+ int irqs; /* Bitmap of IRQs allowed */
+ int flags; /* Capability flags */
+};
+
+/*
+ * The power values are in volts * 10, e.g. 5V is 50, 3.3V is 33.
+ */
+struct power {
+ int vcc;
+ int vpp;
+};
+
+/*
+ * The PC-Card resource IOC_GET_RESOURCE_RANGE
+ */
+struct pccard_resource {
+ int type;
+ u_long size;
+ u_long min;
+ u_long max;
+ u_long resource_addr;
+};
+
+
+/*
+ * Other system limits
+ */
+#define MAXSLOT 16
+#define NUM_MEM_WINDOWS 10
+#define NUM_IO_WINDOWS 6
+#define CARD_DEVICE "/dev/card%d" /* String for snprintf */
+#define PCCARD_MEMSIZE (4*1024)
+
+#endif /* !_PCCARD_CARDINFO_H_ */
Copied: head/usr.sbin/dumpcis/cis.h (from r188632, head/sys/pccard/cis.h)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/usr.sbin/dumpcis/cis.h Sun Feb 15 03:21:37 2009 (r188633, copy of r188632, head/sys/pccard/cis.h)
@@ -0,0 +1,279 @@
+/*
+ * PCMCIA card structures and defines.
+ * These defines relate to the user level
+ * structures and card information, not
+ * driver/process communication.
+ *-------------------------------------------------------------------------
+ */
+/*-
+ * Copyright (c) 1995 Andrew McRae. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ *
+ */
+
+/*
+ * Card Information Structure tuples definitions
+ * The structure of a tuple is basically:
+ *
+ * Tuple_code
+ * Tuple_data_length
+ * Tuple_data ...
+ *
+ * Tuples are contiguous in attribute memory, and
+ * are terminated with a 0xFF for the tuple code or
+ * the tuple length.
+ */
+#ifndef _PCCARD_CIS_H
+#define _PCCARD_CIS_H
+
+#define CIS_NULL 0 /* Empty tuple */
+#define CIS_MEM_COMMON 0x01 /* Device descriptor, common memory */
+#define CIS_LONGLINK_CB 0x02 /* Long link to next chain for CardBus */
+#define CIS_INDIRECT 0x03 /* Indirect access */
+#define CIS_CONF_MAP_CB 0x04 /* Card Configuration map for CardBus */
+#define CIS_CONFIG_CB 0x05 /* Card Configuration entry for CardBus */
+#define CIS_LONGLINK_MFC 0x06 /* Long link to next chain for Multi function card */
+#define CIS_BAR 0x07 /* Base address register for CardBus */
+#define CIS_CHECKSUM 0x10 /* Checksum */
+#define CIS_LONGLINK_A 0x11 /* Link to Attribute memory */
+#define CIS_LONGLINK_C 0x12 /* Link to Common memory */
+#define CIS_LINKTARGET 0x13 /* Linked tuple must start with this. */
+#define CIS_NOLINK 0x14 /* Assume no common memory link tuple. */
+#define CIS_INFO_V1 0x15 /* Card info data, version 1 */
+#define CIS_ALTSTR 0x16 /* Alternate language string tuple. */
+#define CIS_MEM_ATTR 0x17 /* Device descriptor, Attribute memory */
+#define CIS_JEDEC_C 0x18 /* JEDEC descr for common memory */
+#define CIS_JEDEC_A 0x19 /* JEDEC descr for Attribute memory */
+#define CIS_CONF_MAP 0x1A /* Card Configuration map */
+#define CIS_CONFIG 0x1B /* Card Configuration entry */
+#define CIS_DEVICE_OC 0x1C /* Other conditions info - common memory */
+#define CIS_DEVICE_OA 0x1D /* Other conditions info - attribute memory */
+#define CIS_DEVICEGEO 0x1E /* Geometry info for common memory */
+#define CIS_DEVICEGEO_A 0x1F /* Geometry info for attribute memory */
+#define CIS_MANUF_ID 0x20 /* Card manufacturer's ID */
+#define CIS_FUNC_ID 0x21 /* Function of card */
+#define CIS_FUNC_EXT 0x22 /* Functional extension */
+/*
+ * Data recording format tuples.
+ */
+#define CIS_SW_INTERLV 0x23 /* Software interleave */
+#define CIS_VERS_2 0x40 /* Card info data, version 2 */
+#define CIS_FORMAT 0x41 /* Memory card format */
+#define CIS_GEOMETRY 0x42 /* Disk sector layout */
+#define CIS_BYTEORDER 0x43 /* Byte order of memory data */
+#define CIS_DATE 0x44 /* Format data/time */
+#define CIS_BATTERY 0x45 /* Battery replacement date */
+#define CIS_ORG 0x46 /* Organization of data on card */
+#define CIS_END 0xFF /* Termination code */
+
+/*
+ * Internal tuple definitions.
+ *
+ * Device descriptor for memory (CIS_MEM_ATTR, CIS_MEM_COMMON)
+ *
+ * Byte 1:
+ * 0xF0 - Device type
+ * 0x08 - Write protect switch
+ * 0x07 - Speed index (7 = extended speed)
+ * Byte 2: Extended speed (bit 7 = another follows)
+ * Byte 3: (ignored if 0xFF)
+ * 0xF8 - Addressable units (0's numbered)
+ * 0x07 - Unit size
+ * The three byte sequence is repeated until byte 1 == 0xFF
+ */
+
+/*
+ * CIS_INFO_V1 - Version one card information.
+ *
+ * Byte 1: Major version number (should be 4)
+ * Byte 2: Minor version number (should be 1)
+ * Byte 3-x: Null terminated Manufacturer name
+ * Byte x-x: Null terminated product name
+ * Byte x-x: Null terminated additional info 1
+ * Byte x-x: Null terminated additional info 2
+ * Byte x: final byte must be 0xFF
+ */
+#define CIS_MAJOR_VERSION 4
+#define CIS_MINOR_VERSION 1
+
+/*
+ * CIS_CONF_MAP - Provides an address map for the card
+ * configuration register(s), and a max value
+ * identifying the last configuration tuple.
+ *
+ * Byte 1:
+ * 0x3C - Register mask size (0's numbered)
+ * 0x03 - Register address size (0's numbered)
+ * Byte 2:
+ * 0x3F - ID of last configuration.
+ * Byte 3-n: Card register address (size is determined by
+ * the value in byte 1).
+ * Byte x-x: Card register masks (size determined by the
+ * value in byte 1)
+ */
+
+/*
+ * CIS_CONFIG - Card configuration entry. Multiple tuples may
+ * exist of this type, each one describing a different
+ * memory/I-O map that can be used to address this card.
+ * The first one usually has extra config data about the
+ * card features. The final configuration tuple number
+ * is stored in the CIS_CONF_MAP tuple so that the complete
+ * list can be scanned.
+ *
+ * Byte 1:
+ * 0x3F - Configuration ID number.
+ * 0x40 - Indicates this is the default configuration
+ * 0x80 - Interface byte exists
+ * Byte 2: (exists only if bit 0x80 set in byte 1)
+ * 0x0F - Interface type value
+ * 0x10 - Battery voltage detect
+ * 0x20 - Write protect active
+ * 0x40 - RdyBsy active bit
+ * 0x80 - Wait signal required
+ * Byte 3: (features byte)
+ * 0x03 - Power sub-tuple(s) exists
+ * 0x04 - Timing sub-tuple exists
+ * 0x08 - I/O space sub-tuple exists
+ * 0x10 - IRQ sub-tuple exists
+ * 0x60 - Memory space sub-tuple(s) exists
+ * 0x80 - Miscellaneous sub-tuple exists
+ */
+#define CIS_FEAT_POWER(x) ((x) & 0x3)
+#define CIS_FEAT_TIMING 0x4
+#define CIS_FEAT_I_O 0x8
+#define CIS_FEAT_IRQ 0x10
+#define CIS_FEAT_MEMORY(x) (((x) >> 5) & 0x3)
+#define CIS_FEAT_MISC 0x80
+/*
+ * Depending on whether the "features" byte has the corresponding
+ * bit set, a number of sub-tuples follow. Some features have
+ * more than one sub-tuple, depending on the count within the
+ * features byte (e.g power feature bits allows up to 3 sub-tuples).
+ *
+ * Power structure sub-tuple:
+ * Byte 1: parameter exists - Each bit (starting from 0x01) indicates
+ * that a parameter block exists - up to 8 parameter blocks
+ * are therefore allowed).
+ * Byte 2:
+ * 0x7F - Parameter data
+ * 0x80 - More bytes follow (0 = last byte)
+ *
+ * Timing sub-tuple
+ * Byte 1:
+ * 0x03 - Wait scale
+ * 0x1C - Ready scale
+ * 0xE0 - Reserved scale
+ * Byte 2: extended wait scale if wait scale != 3
+ * Byte 3: extended ready scale if ready scale != 7
+ * Byte 4: extended reserved scale if reserved scale != 7
+ */
+#define CIS_WAIT_SCALE(x) ((x) & 0x3)
+#define CIS_READY_SCALE(x) (((x)>>2) & 0x7)
+#define CIS_RESERVED_SCALE(x) (((x)>>5) & 0x7)
+/*
+ * I/O mapping sub-tuple:
+ * Byte 1:
+ * 0x1F - I/O address lines
+ * 0x20 - 8 bit I/O
+ * 0x40 - 16 bit I/O
+ * 0x80 - I/O range??
+ * Byte 2:
+ * 0x0F - 0's numbered count of I/O block subtuples following.
+ * 0x30 - Size of I/O address value within subtuple. Values
+ * can be 1 (8 bits), 2 (16 bits) or 3 (32 bits).
+ * 0xC0 - Size of I/O port block size value within subtuple.
+ * I/O block sub-tuples, count from previous block:
+ * Byte 1-n: I/O start address
+ * Byte x-x: Size of I/O port block.
+ */
+#define CIS_IO_ADDR(x) ((x) & 0x1F)
+#define CIS_IO_8BIT 0x20
+#define CIS_IO_16BIT 0x40
+#define CIS_IO_RANGE 0x80
+#define CIS_IO_BLKS(x) ((x) & 0xF)
+#define CIS_IO_ADSZ(x) (((x)>>4) & 3)
+#define CIS_IO_BLKSZ(x) (((x)>>6) & 3)
+/*
+ * IRQ sub-tuple.
+ * Byte 1:
+ * 0x0F - Irq number or mask bits
+ * 0x10 - IRQ mask values exist
+ * 0x20 - Level triggered interrupts
+ * 0x40 - Pulse triggered requests
+ * 0x80 - Interrupt sharing.
+ * Byte 2-3: Interrupt req mask (if 0x10 of byte 1 set).
+ */
+#define CIS_IRQ_IRQN(x) ((x) & 0xF)
+#define CIS_IRQ_MASK 0x10
+#define CIS_IRQ_LEVEL 0x20
+#define CIS_IRQ_PULSE 0x40
+#define CIS_IRQ_SHARING 0x80
+/*
+ * Memory block subtuple. Depending on the features bits, the
+ * following subtuples are used:
+ * mem features == 1
+ * Byte 1-2: upper 16 bits of 24 bit memory length.
+ * mem features == 2
+ * Byte 1-2: upper 16 bits of 24 bit memory length.
+ * Byte 3-4: upper 16 bits of 24 bit memory address.
+ * mem_features == 3
+ * Byte 1:
+ * 0x07 - 0's numbered count of memory sub-tuples
+ * 0x18 - Memory length size (1's numbered)
+ * 0x60 - Memory address size (1's numbered)
+ * 0x80 - Host address value exists
+ * Memory sub-tuples follow:
+ * Byte 1-n: Memory length value (<< 8)
+ * Byte n-n: Memory card address value (<< 8)
+ * Byte n-n: Memory host address value (<< 8)
+ */
+#define CIS_FEAT_MEM_NONE 0 /* No memory config */
+#define CIS_FEAT_MEM_LEN 1 /* Just length */
+#define CIS_FEAT_MEM_ADDR 2 /* Card address & length */
+#define CIS_FEAT_MEM_WIN 3 /* Multiple windows */
+
+#define CIS_MEM_WINS(x) (((x) & 0x7)+1)
+#define CIS_MEM_LENSZ(x) (((x) >> 3) & 0x3)
+#define CIS_MEM_ADDRSZ(x) (((x) >> 5) & 0x3)
+#define CIS_MEM_HOST 0x80
+/*
+ * Misc sub-tuple.
+ * Byte 1:
+ * Byte 2:
+ * 0x0c - DMA Request Signal
+ * 00 - not support DMA
+ * 01 - use SPKR# line
+ * 10 - use IOIS16# line
+ * 11 - use INPACK# line
+ * 0x10 - DMA Width
+ * 0 - 8 bit DMA
+ * 1 - 16 bit DMA
+ */
+#define CIS_MISC_DMA_WIDTH(x) (((x) & 0x10) >> 4)
+#define CIS_MISC_DMA_REQ(x) (((x) >> 2) & 0x3)
+
+#endif /* _PCCARD_CIS_H */
Modified: head/usr.sbin/dumpcis/printcis.c
==============================================================================
--- head/usr.sbin/dumpcis/printcis.c Sun Feb 15 03:12:46 2009 (r188632)
+++ head/usr.sbin/dumpcis/printcis.c Sun Feb 15 03:21:37 2009 (r188633)
@@ -41,8 +41,7 @@ static const char rcsid[] =
#include <unistd.h>
#include <sys/ioctl.h>
-#include <pccard/cis.h>
-
+#include "cis.h"
#include "readcis.h"
static void dump_config_map(struct tuple *tp);
Modified: head/usr.sbin/dumpcis/readcis.c
==============================================================================
--- head/usr.sbin/dumpcis/readcis.c Sun Feb 15 03:12:46 2009 (r188632)
+++ head/usr.sbin/dumpcis/readcis.c Sun Feb 15 03:21:37 2009 (r188633)
@@ -40,9 +40,8 @@ static const char rcsid[] =
#include <string.h>
#include <unistd.h>
-#include <pccard/cardinfo.h>
-#include <pccard/cis.h>
-
+#include "cardinfo.h"
+#include "cis.h"
#include "readcis.h"
static int ck_linktarget(int, off_t, int);
More information about the svn-src-head
mailing list