svn commit: r365207 - head/sys/dev/mii

Mateusz Guzik mjg at FreeBSD.org
Tue Sep 1 22:08:02 UTC 2020


Author: mjg
Date: Tue Sep  1 22:07:59 2020
New Revision: 365207
URL: https://svnweb.freebsd.org/changeset/base/365207

Log:
  mii: clean up empty lines in .c and .h files

Modified:
  head/sys/dev/mii/amphyreg.h
  head/sys/dev/mii/bmtphyreg.h
  head/sys/dev/mii/brgphy.c
  head/sys/dev/mii/brgphyreg.h
  head/sys/dev/mii/icsphyreg.h
  head/sys/dev/mii/mlphy.c
  head/sys/dev/mii/nsphyterreg.h
  head/sys/dev/mii/qsphy.c
  head/sys/dev/mii/rlswitch.c
  head/sys/dev/mii/tdkphyreg.h
  head/sys/dev/mii/tlphyreg.h

Modified: head/sys/dev/mii/amphyreg.h
==============================================================================
--- head/sys/dev/mii/amphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/amphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -41,7 +41,6 @@
  * AMD Am79C873 registers.
  */
 
-
 #define MII_AMPHY_DSCR		0x10	/* Specified configuration register */a
 #define DSCR_BP4B5B		0x8000	/* Bypass 4B5B encoding */
 #define DSCR_BPSCR		0x4000	/* Bypass scrambler */

Modified: head/sys/dev/mii/bmtphyreg.h
==============================================================================
--- head/sys/dev/mii/bmtphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/bmtphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -49,7 +49,6 @@
 #define	AUX_CTL_BASEWANDER_DIS	0x0040	/* disable baseline wander correction */
 #define	AUX_CTL_FEF_EN		0x0020	/* far-end fault enable */
 
-
 #define	MII_BMTPHY_AUX_STS	0x11	/* auxiliary status */
 #define	AUX_STS_FX_MODE		0x0400	/* 100base-FX mode (strap pin) */
 #define	AUX_STS_LOCKED		0x0200	/* descrambler locked */
@@ -63,22 +62,17 @@
 #define	AUX_STS_LOCKERROR	0x0002	/* lock error detected */
 #define	AUX_STS_MLT3ERROR	0x0001	/* MLT3 code error detected */
 
-
 #define	MII_BMTPHY_RXERROR_CTR	0x12	/* 100base-X Rx error counter */
 #define	RXERROR_CTR_MASK	0x00ff
 
-
 #define	MII_BMTPHY_FCS_CTR	0x13	/* 100base-X false carrier counter */
 #define	FCS_CTR_MASK		0x00ff
 
-
 #define	MII_BMTPHY_DIS_CTR	0x14	/* 100base-X disconnect counter */
 #define	DIS_CTR_MASK		0x00ff
 
-
 #define	MII_BMTPHY_PTEST	0x17	/* PTEST */
 
-
 #define	MII_BMTPHY_AUX_CSR	0x18	/* auxiliary control/status */
 #define	AUX_CSR_JABBER_DIS	0x8000	/* jabber disable */
 #define	AUX_CSR_FLINK		0x4000	/* force 10baseT link pass */
@@ -91,7 +85,6 @@
 #define	AUX_CSR_SPEED		0x0002	/* 1 = 100, 0 = 10 */
 #define	AUX_CSR_FDX		0x0001	/* full-duplex */
 
-
 #define	MII_BMTPHY_AUX_SS	0x19	/* auxiliary status summary */
 #define	AUX_SS_ACOMP		0x8000	/* auto-negotiation complete */
 #define	AUX_SS_ACOMP_ACK	0x4000	/* auto-negotiation compl. ack */
@@ -114,7 +107,6 @@
 #define	AUX_SS_ANEN		0x0002	/* auto-neg. enabled */
 #define	AUX_SS_JABBER		0x0001	/* jabber detected */
 
-
 #define	MII_BMTPHY_INTR		0x1a	/* interrupt register */
 #define	INTR_FDX_LED		0x8000	/* full-duplex led enable */
 #define	INTR_INTR_EN		0x4000	/* interrupt enable */
@@ -127,7 +119,6 @@
 #define	INTR_LINK_CHANGE	0x0002	/* link change */
 #define	INTR_INTR_STATUS	0x0001	/* interrupt status */
 
-
 #define	MII_BMTPHY_AUX2		0x1b	/* auliliary mode 2 */
 #define	AUX2_BLOCK_RXDV		0x0200	/* block RXDV mode enabled */
 #define	AUX2_ANPDQ		0x0100	/* auto-neg parallel detection Q mode */
@@ -138,7 +129,6 @@
 #define	AUX2_TWOLINK_LED	0x0004	/* two link LEDs */
 #define	AUX2_SQE_DIS		0x0002	/* disable SQE pulse */
 
-
 #define	MII_BMTPHY_AUXERR	0x1c	/* auxiliary error */
 #define	AUXERR_MANCHESTER	0x0400	/* Manchester code error */
 #define	AUXERR_EOF		0x0200	/* EOF detection error */
@@ -148,13 +138,11 @@
 #define	AUXERR_SPEED		0x0002	/* 1 = 100, 0 = 10 */
 #define	AUXERR_FDX		0x0001	/* full-duplex */
 
-
 #define	MII_BMTPHY_AUXMODE	0x1d	/* auxiliary mode */
 #define	AUXMODE_ACT_LED_DIS	0x0010	/* activity LED disable */
 #define	AUXMODE_LINK_LED_DIS	0x0008	/* link LED disable */
 #define	AUXMODE_BLOCK_TXEN	0x0002	/* enable block TXEN */
 
-
 #define	MII_BMTPHY_AUXMPHY	0x1e	/* auxiliary multiple phy register */
 #define	AUXMPHY_HCD_TX_FDX	0x8000	/* res. is 100baseTX-FDX */
 #define	AUXMPHY_HCD_T4		0x4000	/* res. is 100baseT4 */
@@ -169,8 +157,6 @@
 #define	AUXMPHY_SUPER_ISO	0x0008	/* super-isolate mode */
 #define	AUXMPHY_10T_SERIAL	0x0002	/* 10baseT serial mode */
 
-
 #define	MII_BMTPHY_TEST		0x1d	/* Broadcom test register */
-
 
 #endif /* _DEV_MII_BMTPHYREG_H_ */

Modified: head/sys/dev/mii/brgphy.c
==============================================================================
--- head/sys/dev/mii/brgphy.c	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/brgphy.c	Tue Sep  1 22:07:59 2020	(r365207)
@@ -381,7 +381,6 @@ brgphy_service(struct mii_softc *sc, struct mii_data *
 		if (sc->mii_ticks <= sc->mii_anegticks)
 			break;
 
-
 		/* Retry autonegotiation */
 		sc->mii_ticks = 0;
 		brgphy_mii_phy_auto(sc, ife->ifm_media);
@@ -1031,7 +1030,6 @@ brgphy_reset(struct mii_softc *sc)
 	} else if (bce_sc) {
 		if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5708 &&
 			(bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) {
-
 			/* Store autoneg capabilities/results in digital block (Page 0) */
 			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2);
 			PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0,
@@ -1080,7 +1078,6 @@ brgphy_reset(struct mii_softc *sc)
 			}
 		} else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709 &&
 			(bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) {
-
 			/* Select the SerDes Digital block of the AN MMD. */
 			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG);
 			val = PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1);

Modified: head/sys/dev/mii/brgphyreg.h
==============================================================================
--- head/sys/dev/mii/brgphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/brgphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -360,7 +360,6 @@
 #define	BRGPHY_5708S_PG0_1000X_STAT1_SPEED_1G	(0x2 << 3)
 #define	BRGPHY_5708S_PG0_1000X_STAT1_SPEED_25G	(0x3 << 3)
 
-
 #define	BRGPHY_5708S_PG0_1000X_CTL2		0x11
 #define	BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN	0x0001
 

Modified: head/sys/dev/mii/icsphyreg.h
==============================================================================
--- head/sys/dev/mii/icsphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/icsphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -94,7 +94,6 @@
 #define	TTR_NOLINK		0x0002	/* Disable Link check */
 #define	TTR_NOSQUELCH		0x0001	/* Disable squelch */
 
-
 /*
  * Extended Control Register 2
  *

Modified: head/sys/dev/mii/mlphy.c
==============================================================================
--- head/sys/dev/mii/mlphy.c	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/mlphy.c	Tue Sep  1 22:07:59 2020	(r365207)
@@ -237,7 +237,6 @@ mlphy_service(xsc, mii, cmd)
 			break;
 		default:
 			return (EINVAL);
-
 		}
 		break;
 

Modified: head/sys/dev/mii/nsphyterreg.h
==============================================================================
--- head/sys/dev/mii/nsphyterreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/nsphyterreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -71,14 +71,12 @@
 #define	PHYSTS_MP_JABBER	0x0020	/* jabber detect */
 #define	PHYSTS_MP_NWAYCOMP	0x0010	/* NWAY complete */
 
-
 #define	MII_NSPHYTER_MIPSCR	0x11	/* MII interrupt PHY specific
 					   control */
 
 #define	MIPSCR_INTEN		0x0002	/* interrupt enable */
 #define	MIPSCR_TINT		0x0001	/* test interrupt */
 
-
 #define	MII_NSPHYTER_MIPGSR	0x12	/* MII interrupt PHY generic
 					   status */
 #define	MIPGSR_MINT		0x8000	/* MII interrupt pending */
@@ -96,7 +94,6 @@
 
 #define	MII_NSPHYTER_RECR	0x15	/* Receive error counter */
 
-
 #define	MII_NSPHYTER_PCSR	0x16	/* PCS configuration and status */
 #define	PCSR_SINGLE_SD		0x8000	/* single-ended SD mode */
 #define	PCSR_FEFI_EN		0x4000	/* far end fault indication mode */
@@ -121,7 +118,6 @@
 #define	PCSR_MP_SD_OPTION	0x0100	/* enhanced signal detection alg. */
 #define	PCSR_MP_NRZI_BYPASS	0x0004	/* NRZI bypass enabled */
 
-
 	/* The bits below are not on MacPHYTER. */
 #define	MII_NSPHYTER_LBR	0x17	/* loopback and bypass */
 #define	LBR_BP_STRETCH		0x4000	/* bypass LED stretching */
@@ -133,7 +129,6 @@
 #define	LBR_TW_LBEN		0x0020	/* TWISTER loopback enable */
 #define	LBR_10_ENDEC_LB		0x0010	/* 10Mb/s ENDEC loopback */
 
-
 	/* The bits below are not on MacPHYTER. */
 #define	MII_NSPHYTER_10BTSCR	0x18	/* 10baseT status and control */
 #define	BTSCR_AUI_TPI		0x2000	/* TREX operating mode */
@@ -150,7 +145,6 @@
 #define	BTSCR_THIN_SEL		0x0008	/* thin ethernet select */
 #define	BTSCR_TX_FILT_DS	0x0004	/* TPI receive filter disable */
 
-
 #define	MII_NSPHYTER_PHYCTRL	0x19	/* PHY control */
 #define	PHYCTRL_TW_EQSEL	0x3000	/* TWISTER e.q. select */
 #define	PHYCTRL_BLW_DS		0x0800	/* TWISTER base line wander disable */
@@ -165,7 +159,6 @@
 #define	PHYCTRL_MP_BIST_START	0x0200	/* start BIST */
 #define	PHYCTRL_MP_BP_STRETCH	0x0100	/* bypass LED stretching */
 #define	PHYCTRL_MP_PAUSE_STS	0x0080	/* pause status */
-
 
 	/* The bits below are MacPHYTER only. */
 #define	MII_MACPHYTER_TBTCTL	0x1a	/* 10baseT Control */

Modified: head/sys/dev/mii/qsphy.c
==============================================================================
--- head/sys/dev/mii/qsphy.c	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/qsphy.c	Tue Sep  1 22:07:59 2020	(r365207)
@@ -32,7 +32,7 @@
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
- 
+
 /*-
  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
  *

Modified: head/sys/dev/mii/rlswitch.c
==============================================================================
--- head/sys/dev/mii/rlswitch.c	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/rlswitch.c	Tue Sep  1 22:07:59 2020	(r365207)
@@ -136,7 +136,7 @@ rlswitch_attach(device_t dev)
 #ifdef RL_DEBUG
 	rlswitch_phydump(dev);
 #endif
-	
+
 #ifdef RL_VLAN
 	int val;
 

Modified: head/sys/dev/mii/tdkphyreg.h
==============================================================================
--- head/sys/dev/mii/tdkphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/tdkphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -72,13 +72,11 @@
 #define	INT_CTRL_RXERR	0x4000
 #define	INT_CTRL_JABBER	0x8000
 
-
 #define	MII_DIAG	18
 #define	DIAG_RLOCK	0x0100
 #define	DIAG_RPASS	0x0200
 #define	DIAG_RATE_100	0x0400
 #define	DIAG_DUPLEX	0x0800
 #define	DIAG_NEGFAIL	0x1000
-
 
 #endif

Modified: head/sys/dev/mii/tlphyreg.h
==============================================================================
--- head/sys/dev/mii/tlphyreg.h	Tue Sep  1 22:07:37 2020	(r365206)
+++ head/sys/dev/mii/tlphyreg.h	Tue Sep  1 22:07:59 2020	(r365207)
@@ -1,5 +1,5 @@
 /*	$NetBSD: tlphyreg.h,v 1.1 1998/08/10 23:59:58 thorpej Exp $	*/
- 
+
 /*-
  * SPDX-License-Identifier: BSD-2-Clause-NetBSD
  *


More information about the svn-src-all mailing list