svn commit: r361486 - in head/sys: contrib/dev/ath/ath_hal/ar9300 dev/ath dev/ath/ath_hal/ar5416 dev/ath/ath_hal/ar9001 dev/ath/ath_hal/ar9002
Adrian Chadd
adrian at FreeBSD.org
Mon May 25 22:31:49 UTC 2020
Author: adrian
Date: Mon May 25 22:31:45 2020
New Revision: 361486
URL: https://svnweb.freebsd.org/changeset/base/361486
Log:
[ath] [ath_hal] Propagate the HAL_RESET_TYPE through to the chip reset; set it during ath_reset()
Although I added the reset type field to ath_hal_reset() years ago,
I never finished adding it both throughout the HALs and in if_ath.c.
This will eventually deprecate the ath_hal force_full_reset option
because it can be requested at the driver layer.
So:
* Teach ar5416ChipReset() and ar9300_chip_reset() about the HAL type
* Use it in ar5416Reset() and ar9300_reset() when doing a full chip reset
* Extend ath_reset() to include the HAL_RESET_TYPE parameter added in the above functions
* Use HAL_RESET_NORMAL in most calls to ath_reset()
* .. but use HAL_RESET_BBPANIC for the BB panics, and HAL_RESET_FORCE_COLD during fatal, beacon miss and other hardware related hangs.
This should be a glorified no-op outside of actual hardware issues.
I've tested things with ath_hal force_full_reset set to 1 for years now,
so I know that feature and a full reset works (albeit much slower than
a warm reset!) and it does unwedge hardware.
The eventual aim is to use this for all the places where the driver
detects a potential hang as well as if long calibration - ie, noise floor
calibration - fails to complete. That's one of the big hardware related
things that causes station mode operation to hang without easy recovery.
Differential Revision: https://reviews.freebsd.org/D24981
Modified:
head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300.h
head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c
head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c
head/sys/dev/ath/ath_hal/ar5416/ar5416.h
head/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c
head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c
head/sys/dev/ath/ath_hal/ar9001/ar9130_attach.c
head/sys/dev/ath/ath_hal/ar9001/ar9160_attach.c
head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c
head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c
head/sys/dev/ath/if_ath.c
head/sys/dev/ath/if_ath_misc.h
head/sys/dev/ath/if_ath_sysctl.c
Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300.h
==============================================================================
--- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300.h Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300.h Mon May 25 22:31:45 2020 (r361486)
@@ -1390,7 +1390,7 @@ extern void ar9300_wowoffload_download_ns_info(struct
extern HAL_BOOL ar9300_reset(struct ath_hal *ah, HAL_OPMODE opmode,
struct ieee80211_channel *chan, HAL_HT_MACMODE macmode, u_int8_t txchainmask,
u_int8_t rxchainmask, HAL_HT_EXTPROTSPACING extprotspacing,
- HAL_BOOL b_channel_change, HAL_STATUS *status, int is_scan);
+ HAL_BOOL b_channel_change, HAL_STATUS *status, HAL_RESET_TYPE reset_type, int is_scan);
extern HAL_BOOL ar9300_lean_channel_change(struct ath_hal *ah, HAL_OPMODE opmode, struct ieee80211_channel *chan,
HAL_HT_MACMODE macmode, u_int8_t txchainmask, u_int8_t rxchainmask);
extern HAL_BOOL ar9300_set_reset_reg(struct ath_hal *ah, u_int32_t type);
@@ -1400,7 +1400,7 @@ extern u_int16_t ar9300_is_single_ant_power_save_poss
extern void ar9300_set_operating_mode(struct ath_hal *ah, int opmode);
extern HAL_BOOL ar9300_phy_disable(struct ath_hal *ah);
extern HAL_BOOL ar9300_disable(struct ath_hal *ah);
-extern HAL_BOOL ar9300_chip_reset(struct ath_hal *ah, struct ieee80211_channel *);
+extern HAL_BOOL ar9300_chip_reset(struct ath_hal *ah, struct ieee80211_channel *, HAL_RESET_TYPE type);
extern HAL_BOOL ar9300_calibration(struct ath_hal *ah, struct ieee80211_channel *chan,
u_int8_t rxchainmask, HAL_BOOL longcal, HAL_BOOL *isIQdone, int is_scan, u_int32_t *sched_cals);
extern void ar9300_reset_cal_valid(struct ath_hal *ah,
Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c
==============================================================================
--- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Mon May 25 22:31:45 2020 (r361486)
@@ -543,6 +543,7 @@ ar9300_reset_freebsd(struct ath_hal *ah, HAL_OPMODE op
HAL_HT_EXTPROTSPACING_20, /* always 20Mhz channel spacing */
bChannelChange,
status,
+ resetType,
AH_FALSE); /* XXX should really extend ath_hal_reset() */
return (r);
Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c
==============================================================================
--- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_reset.c Mon May 25 22:31:45 2020 (r361486)
@@ -2064,7 +2064,7 @@ ar9300_set_rf_mode(struct ath_hal *ah, struct ieee8021
* Places the hardware into reset and then pulls it out of reset
*/
HAL_BOOL
-ar9300_chip_reset(struct ath_hal *ah, struct ieee80211_channel *chan)
+ar9300_chip_reset(struct ath_hal *ah, struct ieee80211_channel *chan, HAL_RESET_TYPE reset_type)
{
struct ath_hal_9300 *ahp = AH9300(ah);
int type = HAL_RESET_WARM;
@@ -2080,8 +2080,13 @@ ar9300_chip_reset(struct ath_hal *ah, struct ieee80211
*/
if (ahp->ah_chip_full_sleep ||
(ah->ah_config.ah_force_full_reset == 1) ||
+ (reset_type == HAL_RESET_FORCE_COLD) ||
+ (reset_type == HAL_RESET_BBPANIC) ||
OS_REG_READ(ah, AR_Q_TXE) ||
(OS_REG_READ(ah, AR_CR) & AR_CR_RXE)) {
+ HALDEBUG(ah, HAL_DEBUG_RESET,
+ "%s: full reset; reset_type=%d, full_sleep=%d\n",
+ __func__, reset_type, ahp->ah_chip_full_sleep);
type = HAL_RESET_COLD;
}
@@ -4510,7 +4515,7 @@ HAL_BOOL
ar9300_reset(struct ath_hal *ah, HAL_OPMODE opmode, struct ieee80211_channel *chan,
HAL_HT_MACMODE macmode, u_int8_t txchainmask, u_int8_t rxchainmask,
HAL_HT_EXTPROTSPACING extprotspacing, HAL_BOOL b_channel_change,
- HAL_STATUS *status, int is_scan)
+ HAL_STATUS *status, HAL_RESET_TYPE reset_type, int is_scan)
{
#define FAIL(_code) do { ecode = _code; goto bad; } while (0)
u_int32_t save_led_state;
@@ -4864,7 +4869,7 @@ ar9300_reset(struct ath_hal *ah, HAL_OPMODE opmode, st
/* Mark PHY inactive prior to reset, to be undone in ar9300_init_bb () */
ar9300_mark_phy_inactive(ah);
- if (!ar9300_chip_reset(ah, chan)) {
+ if (!ar9300_chip_reset(ah, chan, reset_type)) {
HALDEBUG(ah, HAL_DEBUG_RESET, "%s: chip reset failed\n", __func__);
FAIL(HAL_EIO);
}
Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416.h
==============================================================================
--- head/sys/dev/ath/ath_hal/ar5416/ar5416.h Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar5416/ar5416.h Mon May 25 22:31:45 2020 (r361486)
@@ -306,7 +306,8 @@ extern HAL_BOOL ar5416PhyDisable(struct ath_hal *ah);
extern HAL_RFGAIN ar5416GetRfgain(struct ath_hal *ah);
extern HAL_BOOL ar5416Disable(struct ath_hal *ah);
extern HAL_BOOL ar5416ChipReset(struct ath_hal *ah,
- const struct ieee80211_channel *);
+ const struct ieee80211_channel *,
+ HAL_RESET_TYPE);
extern int ar5416GetRegChainOffset(struct ath_hal *ah, int i);
extern HAL_BOOL ar5416SetBoardValues(struct ath_hal *,
const struct ieee80211_channel *);
Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -376,7 +376,7 @@ ar5416Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n",
__func__);
ecode = HAL_EIO;
Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c Mon May 25 22:31:45 2020 (r361486)
@@ -170,13 +170,15 @@ ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode,
if (AR_SREV_HOWL(ah) ||
(AR_SREV_MERLIN(ah) &&
ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) ||
+ (resetType == HAL_RESET_FORCE_COLD) ||
+ (resetType == HAL_RESET_BBPANIC) ||
(ah->ah_config.ah_force_full_reset))
tsf = ar5416GetTsf64(ah);
/* Mark PHY as inactive; marked active in ar5416InitBB() */
ar5416MarkPhyInactive(ah);
- if (!ar5416ChipReset(ah, chan)) {
+ if (!ar5416ChipReset(ah, chan, resetType)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
FAIL(HAL_EIO);
}
@@ -775,7 +777,8 @@ ar5416SetRfMode(struct ath_hal *ah, const struct ieee8
* Places the hardware into reset and then pulls it out of reset
*/
HAL_BOOL
-ar5416ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan)
+ar5416ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan,
+ HAL_RESET_TYPE resetType)
{
OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->ic_freq : 0);
/*
@@ -786,6 +789,13 @@ ar5416ChipReset(struct ath_hal *ah, const struct ieee8
if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
return AH_FALSE;
} else if (ah->ah_config.ah_force_full_reset) {
+ if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
+ return AH_FALSE;
+ } else if ((resetType == HAL_RESET_FORCE_COLD) ||
+ (resetType == HAL_RESET_BBPANIC)) {
+ HALDEBUG(ah, HAL_DEBUG_RESET,
+ "%s: full reset; resetType=%d\n",
+ __func__, resetType);
if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
return AH_FALSE;
} else {
Modified: head/sys/dev/ath/ath_hal/ar9001/ar9130_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9001/ar9130_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar9001/ar9130_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -173,7 +173,7 @@ ar9130Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
Modified: head/sys/dev/ath/ath_hal/ar9001/ar9160_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9001/ar9160_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar9001/ar9160_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -200,7 +200,7 @@ ar9160Attach(uint16_t devid, HAL_SOFTC sc,
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar9160PciePhy, 2);
ar5416AttachPCIE(ah);
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
Modified: head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -259,7 +259,7 @@ ar9280Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
Modified: head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -249,7 +249,7 @@ ar9285Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n",
__func__);
ecode = HAL_EIO;
Modified: head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c Mon May 25 22:31:45 2020 (r361486)
@@ -242,7 +242,7 @@ ar9287Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
- if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
+ if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
Modified: head/sys/dev/ath/if_ath.c
==============================================================================
--- head/sys/dev/ath/if_ath.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/if_ath.c Mon May 25 22:31:45 2020 (r361486)
@@ -2380,7 +2380,7 @@ ath_fatal_proc(void *arg, int pending)
"0x%08x 0x%08x 0x%08x, 0x%08x 0x%08x 0x%08x\n", state[0],
state[1] , state[2], state[3], state[4], state[5]);
}
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_FORCE_COLD);
}
static void
@@ -2491,11 +2491,11 @@ ath_bmiss_proc(void *arg, int pending)
* to clear.
*/
if (ath_hal_gethangstate(sc->sc_ah, 0xff, &hangs) && hangs != 0) {
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_BBPANIC);
device_printf(sc->sc_dev,
"bb hang detected (0x%x), resetting\n", hangs);
} else {
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_FORCE_COLD);
ieee80211_beacon_miss(&sc->sc_ic);
}
@@ -2894,7 +2894,8 @@ ath_reset_grablock(struct ath_softc *sc, int dowait)
* to reset or reload hardware state.
*/
int
-ath_reset(struct ath_softc *sc, ATH_RESET_TYPE reset_type)
+ath_reset(struct ath_softc *sc, ATH_RESET_TYPE reset_type,
+ HAL_RESET_TYPE ah_reset_type)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ath_hal *ah = sc->sc_ah;
@@ -2962,7 +2963,7 @@ ath_reset(struct ath_softc *sc, ATH_RESET_TYPE reset_t
ath_hal_setchainmasks(sc->sc_ah, sc->sc_cur_txchainmask,
sc->sc_cur_rxchainmask);
if (!ath_hal_reset(ah, sc->sc_opmode, ic->ic_curchan, AH_TRUE,
- HAL_RESET_NORMAL, &status))
+ ah_reset_type, &status))
device_printf(sc->sc_dev,
"%s: unable to reset hardware; hal status %u\n",
__func__, status);
@@ -3098,7 +3099,7 @@ ath_reset_vap(struct ieee80211vap *vap, u_long cmd)
return 0;
}
/* XXX? Full or NOLOSS? */
- return ath_reset(sc, ATH_RESET_FULL);
+ return ath_reset(sc, ATH_RESET_FULL, HAL_RESET_NORMAL);
}
struct ath_buf *
@@ -3778,7 +3779,7 @@ ath_reset_proc(void *arg, int pending)
#if 0
device_printf(sc->sc_dev, "%s: resetting\n", __func__);
#endif
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_FORCE_COLD);
}
/*
@@ -3805,7 +3806,7 @@ ath_bstuck_proc(void *arg, int pending)
* This assumes that there's no simultaneous channel mode change
* occurring.
*/
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_FORCE_COLD);
}
static int
@@ -5460,6 +5461,10 @@ ath_calibrate(void *arg)
* infinite NIC restart. Ideally we'd not restart if we
* failed the first NF cal - that /can/ fail sometimes in
* a noisy environment.
+ *
+ * Instead, we should likely temporarily shorten the longCal
+ * period to happen pretty quickly and if a subsequent one
+ * fails, do a full reset.
*/
if (shortCal)
sc->sc_lastshortcal = ticks;
Modified: head/sys/dev/ath/if_ath_misc.h
==============================================================================
--- head/sys/dev/ath/if_ath_misc.h Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/if_ath_misc.h Mon May 25 22:31:45 2020 (r361486)
@@ -58,7 +58,8 @@ extern void ath_freebuf(struct ath_softc *sc, struct a
extern void ath_returnbuf_head(struct ath_softc *sc, struct ath_buf *bf);
extern void ath_returnbuf_tail(struct ath_softc *sc, struct ath_buf *bf);
-extern int ath_reset(struct ath_softc *, ATH_RESET_TYPE);
+extern int ath_reset(struct ath_softc *, ATH_RESET_TYPE,
+ HAL_RESET_TYPE ah_reset_type);
extern void ath_tx_default_comp(struct ath_softc *sc, struct ath_buf *bf,
int fail);
extern void ath_tx_update_ratectrl(struct ath_softc *sc,
Modified: head/sys/dev/ath/if_ath_sysctl.c
==============================================================================
--- head/sys/dev/ath/if_ath_sysctl.c Mon May 25 22:30:44 2020 (r361485)
+++ head/sys/dev/ath/if_ath_sysctl.c Mon May 25 22:31:45 2020 (r361486)
@@ -382,7 +382,8 @@ ath_sysctl_tpscale(SYSCTL_HANDLER_ARGS)
goto finish;
error = !ath_hal_settpscale(sc->sc_ah, scale) ? EINVAL :
- (sc->sc_running) ? ath_reset(sc, ATH_RESET_NOLOSS) : 0;
+ (sc->sc_running) ? ath_reset(sc, ATH_RESET_NOLOSS,
+ HAL_RESET_NORMAL) : 0;
finish:
ATH_LOCK(sc);
@@ -443,7 +444,8 @@ ath_sysctl_rfkill(SYSCTL_HANDLER_ARGS)
error = EINVAL;
goto finish;
}
- error = sc->sc_running ? ath_reset(sc, ATH_RESET_FULL) : 0;
+ error = sc->sc_running ? ath_reset(sc, ATH_RESET_FULL,
+ HAL_RESET_NORMAL) : 0;
finish:
ATH_LOCK(sc);
@@ -670,7 +672,7 @@ ath_sysctl_intmit(SYSCTL_HANDLER_ARGS)
* things in an inconsistent state.
*/
if (sc->sc_running)
- ath_reset(sc, ATH_RESET_NOLOSS);
+ ath_reset(sc, ATH_RESET_NOLOSS, HAL_RESET_NORMAL);
error = 0;
More information about the svn-src-all
mailing list