svn commit: r346594 - head/sbin/camcontrol
Steven Hartland
smh at FreeBSD.org
Tue Sep 3 14:08:19 UTC 2019
Author: smh
Date: Tue Apr 23 07:46:38 2019
New Revision: 346594
URL: https://svnweb.freebsd.org/changeset/base/346594
Log:
Add ATA power mode support to camcontrol
Add the ability to report ATA device power mode with the cmmand 'powermode'
to compliment the existing ability to set it using idle, standby and sleep
commands.
MFC after: 2 weeks
Sponsored by: Multiplay
Modified:
head/sbin/camcontrol/camcontrol.8
head/sbin/camcontrol/camcontrol.c
Modified: head/sbin/camcontrol/camcontrol.8
==============================================================================
--- head/sbin/camcontrol/camcontrol.8 Tue Apr 23 06:36:32 2019 (r346593)
+++ head/sbin/camcontrol/camcontrol.8 Tue Apr 23 07:46:38 2019 (r346594)
@@ -27,7 +27,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd March 12, 2019
+.Dd April 22, 2019
.Dt CAMCONTROL 8
.Os
.Sh NAME
@@ -243,6 +243,10 @@
.Op device id
.Op generic args
.Nm
+.Ic powermode
+.Op device id
+.Op generic args
+.Nm
.Ic apm
.Op device id
.Op generic args
@@ -1388,6 +1392,8 @@ Value 0 disables timer.
Put ATA device into SLEEP state.
Note that the only way get device out of
this state may be reset.
+.It Ic powermode
+Report ATA device power mode.
.It Ic apm
It optional parameter
.Pq Fl l
Modified: head/sbin/camcontrol/camcontrol.c
==============================================================================
--- head/sbin/camcontrol/camcontrol.c Tue Apr 23 06:36:32 2019 (r346593)
+++ head/sbin/camcontrol/camcontrol.c Tue Apr 23 07:46:38 2019 (r346594)
@@ -109,7 +109,8 @@ typedef enum {
CAM_CMD_ZONE = 0x00000026,
CAM_CMD_EPC = 0x00000027,
CAM_CMD_TIMESTAMP = 0x00000028,
- CAM_CMD_MMCSD_CMD = 0x00000029
+ CAM_CMD_MMCSD_CMD = 0x00000029,
+ CAM_CMD_POWER_MODE = 0x0000002a,
} cam_cmdmask;
typedef enum {
@@ -236,6 +237,7 @@ static struct camcontrol_opts option_table[] = {
{"idle", CAM_CMD_IDLE, CAM_ARG_NONE, "t:"},
{"standby", CAM_CMD_STANDBY, CAM_ARG_NONE, "t:"},
{"sleep", CAM_CMD_SLEEP, CAM_ARG_NONE, ""},
+ {"powermode", CAM_CMD_POWER_MODE, CAM_ARG_NONE, ""},
{"apm", CAM_CMD_APM, CAM_ARG_NONE, "l:"},
{"aam", CAM_CMD_AAM, CAM_ARG_NONE, "l:"},
{"fwdownload", CAM_CMD_DOWNLOAD_FW, CAM_ARG_NONE, "f:qsy"},
@@ -8885,6 +8887,61 @@ bailout:
}
static int
+atapm_proc_resp(struct cam_device *device, union ccb *ccb)
+{
+ struct ata_res *res;
+
+ res = &ccb->ataio.res;
+ if (res->status & ATA_STATUS_ERROR) {
+ if (arglist & CAM_ARG_VERBOSE) {
+ cam_error_print(device, ccb, CAM_ESF_ALL,
+ CAM_EPF_ALL, stderr);
+ printf("error = 0x%02x, sector_count = 0x%04x, "
+ "device = 0x%02x, status = 0x%02x\n",
+ res->error, res->sector_count,
+ res->device, res->status);
+ }
+
+ return (1);
+ }
+
+ if (arglist & CAM_ARG_VERBOSE) {
+ fprintf(stdout, "%s%d: Raw native check power data:\n",
+ device->device_name, device->dev_unit_num);
+ /* res is 4 byte aligned */
+ dump_data((uint16_t*)(uintptr_t)res, sizeof(struct ata_res));
+
+ printf("error = 0x%02x, sector_count = 0x%04x, device = 0x%02x, "
+ "status = 0x%02x\n", res->error, res->sector_count,
+ res->device, res->status);
+ }
+
+ printf("%s%d: ", device->device_name, device->dev_unit_num);
+ switch (res->sector_count) {
+ case 0x00:
+ printf("Standby mode\n");
+ break;
+ case 0x40:
+ printf("NV Cache Power Mode and the spindle is spun down or spinning down\n");
+ break;
+ case 0x41:
+ printf("NV Cache Power Mode and the spindle is spun up or spinning up\n");
+ break;
+ case 0x80:
+ printf("Idle mode\n");
+ break;
+ case 0xff:
+ printf("Active or Idle mode\n");
+ break;
+ default:
+ printf("Unknown mode 0x%02x\n", res->sector_count);
+ break;
+ }
+
+ return (0);
+}
+
+static int
atapm(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout)
{
@@ -8892,6 +8949,7 @@ atapm(struct cam_device *device, int argc, char **argv
int retval = 0;
int t = -1;
int c;
+ u_int8_t ata_flags = 0;
u_char cmd, sc;
ccb = cam_getccb(device);
@@ -8920,6 +8978,10 @@ atapm(struct cam_device *device, int argc, char **argv
cmd = ATA_STANDBY_IMMEDIATE;
else
cmd = ATA_STANDBY_CMD;
+ } else if (strcmp(argv[1], "powermode") == 0) {
+ cmd = ATA_CHECK_POWER_MODE;
+ ata_flags = AP_FLAG_CHK_COND;
+ t = -1;
} else {
cmd = ATA_SLEEP;
t = -1;
@@ -8937,11 +8999,12 @@ atapm(struct cam_device *device, int argc, char **argv
else
sc = 253;
- retval = ata_do_28bit_cmd(device,
+ retval = ata_do_cmd(device,
ccb,
/*retries*/retry_count,
/*flags*/CAM_DIR_NONE,
/*protocol*/AP_PROTO_NON_DATA,
+ /*ata_flags*/ata_flags,
/*tag_action*/MSG_SIMPLE_Q_TAG,
/*command*/cmd,
/*features*/0,
@@ -8953,7 +9016,11 @@ atapm(struct cam_device *device, int argc, char **argv
/*quiet*/1);
cam_freeccb(ccb);
- return (retval);
+
+ if (retval || cmd != ATA_CHECK_POWER_MODE)
+ return (retval);
+
+ return (atapm_proc_resp(device, ccb));
}
static int
@@ -9566,6 +9633,7 @@ usage(int printlong)
" camcontrol idle [dev_id][generic args][-t time]\n"
" camcontrol standby [dev_id][generic args][-t time]\n"
" camcontrol sleep [dev_id][generic args]\n"
+" camcontrol powermode [dev_id][generic args]\n"
" camcontrol apm [dev_id][generic args][-l level]\n"
" camcontrol aam [dev_id][generic args][-l level]\n"
" camcontrol fwdownload [dev_id][generic args] <-f fw_image> [-q]\n"
@@ -9629,6 +9697,7 @@ usage(int printlong)
"idle send the ATA IDLE command to the named device\n"
"standby send the ATA STANDBY command to the named device\n"
"sleep send the ATA SLEEP command to the named device\n"
+"powermode send the ATA CHECK POWER MODE command to the named device\n"
"fwdownload program firmware of the named device with the given image\n"
"security report or send ATA security commands to the named device\n"
"persist send the SCSI PERSISTENT RESERVE IN or OUT commands\n"
@@ -10199,6 +10268,7 @@ main(int argc, char **argv)
case CAM_CMD_IDLE:
case CAM_CMD_STANDBY:
case CAM_CMD_SLEEP:
+ case CAM_CMD_POWER_MODE:
error = atapm(cam_dev, argc, argv,
combinedopt, retry_count, timeout);
break;
More information about the svn-src-all
mailing list