svn commit: r327976 - in head/sys: arm/broadcom/bcm2835 dts/arm modules/rpi_pwm
Poul-Henning Kamp
phk at FreeBSD.org
Sun Jan 14 20:36:23 UTC 2018
Author: phk
Date: Sun Jan 14 20:36:21 2018
New Revision: 327976
URL: https://svnweb.freebsd.org/changeset/base/327976
Log:
Add a rudimentary PWM driver for the RaspberryPi.
Control is through sysctl, only GPIO12 supported.
bootverbose creates sysctls for direct mangling of relevant registers.
Only tested on RPI2
Added:
head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c (contents, props changed)
head/sys/modules/rpi_pwm/
head/sys/modules/rpi_pwm/Makefile (contents, props changed)
Modified:
head/sys/dts/arm/bcm2836.dtsi
Added: head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/broadcom/bcm2835/bcm2835_pwm.c Sun Jan 14 20:36:21 2018 (r327976)
@@ -0,0 +1,439 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2017 Poul-Henning Kamp <phk at freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/lock.h>
+#include <sys/sysctl.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+#include <machine/intr.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <arm/broadcom/bcm2835/bcm2835_gpio.h>
+
+static struct ofw_compat_data compat_data[] = {
+ {"broadcom,bcm2835-pwm", 1},
+ {"brcm,bcm2835-pwm", 1},
+ {NULL, 0}
+};
+
+struct bcm_pwm_softc {
+ device_t sc_dev;
+
+ struct resource * sc_mem_res;
+ bus_space_tag_t sc_m_bst;
+ bus_space_handle_t sc_m_bsh;
+
+ struct resource * sc_clk_res;
+ bus_space_tag_t sc_c_bst;
+ bus_space_handle_t sc_c_bsh;
+
+ uint32_t freq;
+ uint32_t period;
+ uint32_t ratio;
+ uint32_t mode;
+
+};
+
+#define BCM_PWM_MEM_WRITE(_sc, _off, _val) \
+ bus_space_write_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off, _val)
+#define BCM_PWM_MEM_READ(_sc, _off) \
+ bus_space_read_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off)
+#define BCM_PWM_CLK_WRITE(_sc, _off, _val) \
+ bus_space_write_4(_sc->sc_c_bst, _sc->sc_c_bsh, _off, _val)
+#define BCM_PWM_CLK_READ(_sc, _off) \
+ bus_space_read_4(_sc->sc_c_bst, _sc->sc_c_bsh, _off)
+
+#define W_CTL(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x00, _val)
+#define R_CTL(_sc) BCM_PWM_MEM_READ(_sc, 0x00)
+#define W_STA(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x04, _val)
+#define R_STA(_sc) BCM_PWM_MEM_READ(_sc, 0x04)
+#define W_RNG(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x10, _val)
+#define R_RNG(_sc) BCM_PWM_MEM_READ(_sc, 0x10)
+#define W_DAT(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x14, _val)
+#define R_DAT(_sc) BCM_PWM_MEM_READ(_sc, 0x14)
+
+#define W_CMCLK(_sc, _val) BCM_PWM_CLK_WRITE(_sc, 0x00, 0x5a000000 | (_val))
+#define R_CMCLK(_sc) BCM_PWM_CLK_READ(_sc, 0x00)
+#define W_CMDIV(_sc, _val) BCM_PWM_CLK_WRITE(_sc, 0x04, 0x5a000000 | (_val))
+#define R_CMDIV(_s) BCM_PWM_CLK_READ(_sc, 0x04)
+
+static int
+bcm_pwm_reconf(struct bcm_pwm_softc *sc)
+{
+ int i;
+ uint32_t u;
+ device_t gpio;
+
+ /* Disable PWM */
+ W_CTL(sc, 0);
+
+ /* Stop PWM clock */
+ W_CMCLK(sc, 6);
+ for (i = 0; i < 10; i++) {
+ u = R_CMCLK(sc);
+ if (!(u&0x80))
+ break;
+ DELAY(1000);
+ }
+ if (u&0x80) {
+ device_printf(sc->sc_dev, "Failed to stop clock\n");
+ return(EIO);
+ }
+
+ if (sc->mode == 0) {
+ // XXX: GPIO cfg ?
+ return (0);
+ }
+
+ /* Ask GPIO0 to set ALT0 for pin 12 */
+ gpio = devclass_get_device(devclass_find("gpio"), 0);
+ if (!gpio) {
+ device_printf(sc->sc_dev, "cannot find gpio0\n");
+ return (ENXIO);
+ }
+ bcm_gpio_set_alternate(gpio, 12, BCM_GPIO_ALT0);
+
+ /* Configure divider */
+ u = 500000000/sc->freq;
+ if (u < 4) {
+ device_printf(sc->sc_dev, "Freq too high (max 125MHz)\n");
+ return(EINVAL);
+ }
+ if (u > 0xfff) {
+ device_printf(sc->sc_dev, "Freq too low (min 123Hz)\n");
+ return(EINVAL);
+ }
+ sc->freq = 500000000/u;
+ W_CMDIV(sc, u << 12);
+
+ /* Start PWM clock */
+ W_CMCLK(sc, 0x16);
+ for (i = 0; i < 10; i++) {
+ u = R_CMCLK(sc);
+ if ((u&0x80))
+ break;
+ DELAY(1000);
+ }
+ if (!(u&0x80)) {
+ device_printf(sc->sc_dev, "Failed to start clock\n");
+ return(EIO);
+ }
+
+ /* Config PWM */
+ W_RNG(sc, sc->period);
+ W_DAT(sc, sc->ratio);
+
+ /* Start PWM */
+ if (sc->mode == 1)
+ W_CTL(sc, 0x81);
+ else
+ W_CTL(sc, 0x1);
+
+ return (0);
+}
+
+static int
+bcm_pwm_pwm_freq_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ uint32_t r;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ if (sc->mode == 1)
+ r = sc->freq / sc->period;
+ else
+ r = 0;
+ error = sysctl_handle_int(oidp, &r, sizeof(r), req);
+ return (error);
+}
+
+
+static int
+bcm_pwm_mode_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ uint32_t r;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ r = sc->mode;
+ error = sysctl_handle_int(oidp, &r, sizeof(r), req);
+ if (error != 0 || req->newptr == NULL)
+ return (error);
+ if (r > 2)
+ return (EINVAL);
+ sc->mode = r;
+ return (bcm_pwm_reconf(sc));
+}
+
+static int
+bcm_pwm_freq_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ uint32_t r;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ r = sc->freq;
+ error = sysctl_handle_int(oidp, &r, sizeof(r), req);
+ if (error != 0 || req->newptr == NULL)
+ return (error);
+ if (r > 125000000)
+ return (EINVAL);
+ sc->freq = r;
+ return (bcm_pwm_reconf(sc));
+}
+
+static int
+bcm_pwm_period_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ error = sysctl_handle_int(oidp, &sc->period, sizeof(sc->period), req);
+ if (error != 0 || req->newptr == NULL)
+ return (error);
+ return (bcm_pwm_reconf(sc));
+}
+
+static int
+bcm_pwm_ratio_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ uint32_t r;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ r = sc->ratio;
+ error = sysctl_handle_int(oidp, &r, sizeof(r), req);
+ if (error != 0 || req->newptr == NULL)
+ return (error);
+ if (r > sc->period) // XXX >= ?
+ return (EINVAL);
+ sc->ratio = r;
+ BCM_PWM_MEM_WRITE(sc, 0x14, sc->ratio);
+ return (0);
+}
+
+static int
+bcm_pwm_reg_proc(SYSCTL_HANDLER_ARGS)
+{
+ struct bcm_pwm_softc *sc;
+ uint32_t reg;
+ int error;
+
+ sc = (struct bcm_pwm_softc *)arg1;
+ if (arg2 & 0x100)
+ reg = BCM_PWM_CLK_READ(sc, arg2 & 0xff);
+ else
+ reg = BCM_PWM_MEM_READ(sc, arg2 & 0xff);
+
+ error = sysctl_handle_int(oidp, ®, sizeof(reg), req);
+ if (error != 0 || req->newptr == NULL)
+ return (error);
+
+ if (arg2 & 0x100)
+ BCM_PWM_CLK_WRITE(sc, arg2 & 0xff, reg);
+ else
+ BCM_PWM_MEM_WRITE(sc, arg2, reg);
+ return (0);
+}
+
+static void
+bcm_pwm_sysctl_init(struct bcm_pwm_softc *sc)
+{
+ struct sysctl_ctx_list *ctx;
+ struct sysctl_oid *tree_node;
+ struct sysctl_oid_list *tree;
+
+ /*
+ * Add system sysctl tree/handlers.
+ */
+ ctx = device_get_sysctl_ctx(sc->sc_dev);
+ tree_node = device_get_sysctl_tree(sc->sc_dev);
+ tree = SYSCTL_CHILDREN(tree_node);
+ if (bootverbose) {
+#define RR(x,y) \
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, y, \
+ CTLFLAG_RW | CTLTYPE_UINT, sc, 0x##x, \
+ bcm_pwm_reg_proc, "IU", "Register 0x" #x " " y);
+
+ RR(100, "PWMCTL")
+ RR(104, "PWMDIV")
+ RR(24, "DAT2")
+ RR(20, "RNG2")
+ RR(18, "FIF1")
+ RR(14, "DAT1")
+ RR(10, "RNG1")
+ RR(08, "DMAC")
+ RR(04, "STA")
+ RR(00, "CTL")
+#undef RR
+ }
+
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "pwm_freq",
+ CTLFLAG_RD | CTLTYPE_UINT, sc, 0,
+ bcm_pwm_pwm_freq_proc, "IU", "PWM frequency (Hz)");
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "period",
+ CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
+ bcm_pwm_period_proc, "IU", "PWM period (#clocks)");
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "ratio",
+ CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
+ bcm_pwm_ratio_proc, "IU", "PWM ratio (0...period)");
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "freq",
+ CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
+ bcm_pwm_freq_proc, "IU", "PWM clock (Hz)");
+ SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "mode",
+ CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
+ bcm_pwm_mode_proc, "IU", "PWM mode (0=off, 1=pwm, 2=dither)");
+}
+
+static int
+bcm_pwm_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+ return (ENXIO);
+
+ device_set_desc(dev, "BCM2708/2835 PWM controller");
+
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+bcm_pwm_attach(device_t dev)
+{
+ struct bcm_pwm_softc *sc;
+ int rid;
+
+ if (device_get_unit(dev) != 0) {
+ device_printf(dev, "only one PWM controller supported\n");
+ return (ENXIO);
+ }
+
+ sc = device_get_softc(dev);
+ sc->sc_dev = dev;
+
+ rid = 0;
+ sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (!sc->sc_mem_res) {
+ device_printf(dev, "cannot allocate memory window\n");
+ return (ENXIO);
+ }
+
+ sc->sc_m_bst = rman_get_bustag(sc->sc_mem_res);
+ sc->sc_m_bsh = rman_get_bushandle(sc->sc_mem_res);
+
+ rid = 1;
+ sc->sc_clk_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+ RF_ACTIVE);
+ if (!sc->sc_clk_res) {
+ device_printf(dev, "cannot allocate clock window\n");
+ return (ENXIO);
+ }
+ sc->sc_c_bst = rman_get_bustag(sc->sc_clk_res);
+ sc->sc_c_bsh = rman_get_bushandle(sc->sc_clk_res);
+
+ /* Add sysctl nodes. */
+ bcm_pwm_sysctl_init(sc);
+
+ sc->freq = 125000000;
+ sc->period = 10000;
+ sc->ratio = 2500;
+
+
+ return (bus_generic_attach(dev));
+}
+
+static int
+bcm_pwm_detach(device_t dev)
+{
+ struct bcm_pwm_softc *sc;
+
+ bus_generic_detach(dev);
+
+ sc = device_get_softc(dev);
+ sc->mode = 0;
+ (void)bcm_pwm_reconf(sc);
+ if (sc->sc_mem_res)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
+ if (sc->sc_clk_res)
+ bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_clk_res);
+
+ return (0);
+}
+
+static phandle_t
+bcm_pwm_get_node(device_t bus, device_t dev)
+{
+
+ /* We only have one child, the SPI bus, which needs our own node. */
+ return (ofw_bus_get_node(bus));
+}
+
+static device_method_t bcm_pwm_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, bcm_pwm_probe),
+ DEVMETHOD(device_attach, bcm_pwm_attach),
+ DEVMETHOD(device_detach, bcm_pwm_detach),
+
+ /* ofw_bus interface */
+ DEVMETHOD(ofw_bus_get_node, bcm_pwm_get_node),
+
+ DEVMETHOD_END
+};
+
+static devclass_t bcm_pwm_devclass;
+
+static driver_t bcm_pwm_driver = {
+ "pwm",
+ bcm_pwm_methods,
+ sizeof(struct bcm_pwm_softc),
+};
+
+DRIVER_MODULE(bcm2835_pwm, simplebus, bcm_pwm_driver, bcm_pwm_devclass, 0, 0);
Modified: head/sys/dts/arm/bcm2836.dtsi
==============================================================================
--- head/sys/dts/arm/bcm2836.dtsi Sun Jan 14 20:30:58 2018 (r327975)
+++ head/sys/dts/arm/bcm2836.dtsi Sun Jan 14 20:36:21 2018 (r327976)
@@ -425,6 +425,11 @@
interrupt-parent = <&intc>;
};
+ pwm0 {
+ compatible = "broadcom,bcm2835-pwm";
+ reg = <0x20c000 0x28>,<0x1010a0 8>;
+ };
+
dma: dma {
compatible = "broadcom,bcm2835-dma",
"broadcom,bcm2708-dma";
Added: head/sys/modules/rpi_pwm/Makefile
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/modules/rpi_pwm/Makefile Sun Jan 14 20:36:21 2018 (r327976)
@@ -0,0 +1,10 @@
+# $FreeBSD$
+
+.PATH: ${SRCTOP}/sys/arm/broadcom/bcm2835/
+
+KMOD= rpi_pwm
+SRCS= bcm2835_pwm.c
+
+SRCS+= bus_if.h device_if.h ofw_bus_if.h
+
+.include <bsd.kmod.mk>
More information about the svn-src-all
mailing list