svn commit: r337719 - head/sys/dev/ichiic
Oleksandr Tymoshenko
gonzo at FreeBSD.org
Mon Aug 13 18:53:16 UTC 2018
Author: gonzo
Date: Mon Aug 13 18:53:14 2018
New Revision: 337719
URL: https://svnweb.freebsd.org/changeset/base/337719
Log:
[ig4] Fix initialization sequence for newer ig4 chips
Newer chips may require assert/deassert after power down for proper
startup. Check respective flag in DEVIDLE_CTRL and perform operation
if neccesssary.
PR: 221777
Submitted by: marc.priggemeyer at gmail.com
Obtained from: DragonFly BSD
Tested on: Thinkpad T470
Modified:
head/sys/dev/ichiic/ig4_iic.c
head/sys/dev/ichiic/ig4_reg.h
Modified: head/sys/dev/ichiic/ig4_iic.c
==============================================================================
--- head/sys/dev/ichiic/ig4_iic.c Mon Aug 13 17:24:31 2018 (r337718)
+++ head/sys/dev/ichiic/ig4_iic.c Mon Aug 13 18:53:14 2018 (r337719)
@@ -525,6 +525,16 @@ ig4iic_attach(ig4iic_softc_t *sc)
mtx_init(&sc->io_lock, "IG4 I/O lock", NULL, MTX_DEF);
sx_init(&sc->call_lock, "IG4 call lock");
+ v = reg_read(sc, IG4_REG_DEVIDLE_CTRL);
+ if (sc->version == IG4_SKYLAKE && (v & IG4_RESTORE_REQUIRED) ) {
+ reg_write(sc, IG4_REG_DEVIDLE_CTRL, IG4_DEVICE_IDLE | IG4_RESTORE_REQUIRED);
+ reg_write(sc, IG4_REG_DEVIDLE_CTRL, 0);
+
+ reg_write(sc, IG4_REG_RESETS_SKL, IG4_RESETS_ASSERT_SKL);
+ reg_write(sc, IG4_REG_RESETS_SKL, IG4_RESETS_DEASSERT_SKL);
+ DELAY(1000);
+ }
+
if (sc->version == IG4_ATOM)
v = reg_read(sc, IG4_REG_COMP_TYPE);
Modified: head/sys/dev/ichiic/ig4_reg.h
==============================================================================
--- head/sys/dev/ichiic/ig4_reg.h Mon Aug 13 17:24:31 2018 (r337718)
+++ head/sys/dev/ichiic/ig4_reg.h Mon Aug 13 18:53:14 2018 (r337719)
@@ -78,6 +78,7 @@
#define IG4_REG_CTL 0x0000 /* RW Control Register */
#define IG4_REG_TAR_ADD 0x0004 /* RW Target Address */
+#define IG4_REG_HS_MADDR 0x000C /* RW High Speed Master Mode Code Address*/
#define IG4_REG_DATA_CMD 0x0010 /* RW Data Buffer and Command */
#define IG4_REG_SS_SCL_HCNT 0x0014 /* RW Std Speed clock High Count */
#define IG4_REG_SS_SCL_LCNT 0x0018 /* RW Std Speed clock Low Count */
@@ -92,7 +93,9 @@
#define IG4_REG_CLR_RX_UNDER 0x0044 /* RO Clear RX_Under Interrupt */
#define IG4_REG_CLR_RX_OVER 0x0048 /* RO Clear RX_Over Interrupt */
#define IG4_REG_CLR_TX_OVER 0x004C /* RO Clear TX_Over Interrupt */
+#define IG4_REG_CLR_RD_REQ 0x0050 /* RO Clear RD_Req Interrupt */
#define IG4_REG_CLR_TX_ABORT 0x0054 /* RO Clear TX_Abort Interrupt */
+#define IG4_REG_CLR_RX_DONE 0x0058 /* RO Clear RX_Done Interrupt */
#define IG4_REG_CLR_ACTIVITY 0x005C /* RO Clear Activity Interrupt */
#define IG4_REG_CLR_STOP_DET 0x0060 /* RO Clear STOP Detection Int */
#define IG4_REG_CLR_START_DET 0x0064 /* RO Clear START Detection Int */
@@ -108,6 +111,7 @@
#define IG4_REG_DMA_TDLR 0x008C /* RW DMA Transmit Data Level */
#define IG4_REG_DMA_RDLR 0x0090 /* RW DMA Receive Data Level */
#define IG4_REG_SDA_SETUP 0x0094 /* RW SDA Setup */
+#define IG4_REG_ACK_GENERAL_CALL 0x0098 /* RW I2C ACK General Call */
#define IG4_REG_ENABLE_STATUS 0x009C /* RO Enable Status */
/* Available at least on Atom SoCs and Haswell mobile. */
#define IG4_REG_COMP_PARAM1 0x00F4 /* RO Component Parameter */
@@ -118,6 +122,9 @@
#define IG4_REG_RESETS_SKL 0x0204 /* RW Reset Register */
#define IG4_REG_ACTIVE_LTR_VALUE 0x0210 /* RW Active LTR Value */
#define IG4_REG_IDLE_LTR_VALUE 0x0214 /* RW Idle LTR Value */
+#define IG4_REG_TX_ACK_COUNT 0x0218 /* RO TX ACK Count */
+#define IG4_REG_RX_BYTE_COUNT 0x021C /* RO RX ACK Count */
+#define IG4_REG_DEVIDLE_CTRL 0x024C /* RW Device Control */
/* Available at least on Atom SoCs */
#define IG4_REG_CLK_PARMS 0x0800 /* RW Clock Parameters */
/* Available at least on Atom SoCs and Haswell mobile */
@@ -581,6 +588,17 @@
/* Skylake-U/Y and Kaby Lake-U/Y have the reset bits inverted */
#define IG4_RESETS_DEASSERT_SKL 0x0003
#define IG4_RESETS_ASSERT_SKL 0x0000
+
+/* Newer versions of the I2C controller allow to check whether
+ * the above ASSERT/DEASSERT is necessary by querying the DEVIDLE_CONTROL
+ * register.
+ *
+ * the RESTORE_REQUIRED bit can be cleared by writing 1
+ * the DEVICE_IDLE status can be set to put the controller in an idle state
+ *
+ */
+#define IG4_RESTORE_REQUIRED 0x0008
+#define IG4_DEVICE_IDLE 0x0004
/*
* GENERAL - (RW) General Reigster 22.2.38
More information about the svn-src-all
mailing list