svn commit: r325231 - head/sys/mips/mediatek

[Michael Zhilin]

Author: mizhka
Date: Tue Oct 31 11:29:16 2017
New Revision: 325231
URL: https://svnweb.freebsd.org/changeset/base/325231

Log:
  [mips] Pin control configuration for MediaTek RT2880
  
  RT2880 is MIPS4Kc SoC used in many SOHO routers. This commits adds GPIO pin
  control configuration of RT2880.
  
  Submitted by:	Hiroki Mori <yamori83 at yahoo.co.jp>
  Reviewed by:	mizhka, sgalabov
  Differential Revision:	https://reviews.freebsd.org/D12648

Modified:
  head/sys/mips/mediatek/mtk_pinctrl.c
  head/sys/mips/mediatek/mtk_pinctrl.h

Modified: head/sys/mips/mediatek/mtk_pinctrl.c
==============================================================================
--- head/sys/mips/mediatek/mtk_pinctrl.c	Tue Oct 31 11:09:39 2017	(r325230)
+++ head/sys/mips/mediatek/mtk_pinctrl.c	Tue Oct 31 11:29:16 2017	(r325231)
@@ -169,6 +169,9 @@ mtk_pinctrl_configure(device_t dev, phandle_t cfgxref)
 	socid = mtk_soc_get_socid();
 
 	switch (socid) {
+	case MTK_SOC_RT2880:
+		pintable = rt2880_pintable;
+		break;
 	case MTK_SOC_RT3050: /* fallthrough */
 	case MTK_SOC_RT3052:
 	case MTK_SOC_RT3350:

Modified: head/sys/mips/mediatek/mtk_pinctrl.h
==============================================================================
--- head/sys/mips/mediatek/mtk_pinctrl.h	Tue Oct 31 11:09:39 2017	(r325230)
+++ head/sys/mips/mediatek/mtk_pinctrl.h	Tue Oct 31 11:29:16 2017	(r325231)
@@ -118,6 +118,14 @@ DECL_FUNC(gex_func) = {
 	FUNC("ge1", 0), FUNC("ge2", 0), FUNC("gpio", 1)
 };
 
+DECL_FUNC(rt2880_uartf_func) = {
+	FUNC("uartf", 0), FUNC("gpio", 1)
+};
+
+DECL_FUNC(rt2880_pci_func) = {
+	FUNC("pci", 0), FUNC("gpio", 1)
+};
+
 DECL_FUNC(rt3883_pci_func) = {
 	FUNC("pci-dev", 0), FUNC("pci-host2", 1), FUNC("pci-host1", 2),
 	FUNC("pci-fnc", 3), FUNC("gpio", 7)
@@ -295,6 +303,18 @@ DECL_TABLE(mt7620_pintable) = {
 	GROUP("nd_sd", SYSCTL_GPIOMODE, 18, 3, nd_sd_func),
 	GROUP("pa", SYSCTL_GPIOMODE, 20, 1, pa_func),
 	GROUP("wdt", SYSCTL_GPIOMODE, 21, 3, wdt_func),
+	GROUP_END
+};
+
+DECL_TABLE(rt2880_pintable) = {
+	GROUP("i2c", SYSCTL_GPIOMODE, 0, 1, i2c_func),
+	GROUP("uartf", SYSCTL_GPIOMODE, 1, 1, rt2880_uartf_func),
+	GROUP("spi", SYSCTL_GPIOMODE, 2, 1, spi_func),
+	GROUP("uartlite", SYSCTL_GPIOMODE, 3, 1, uartlite_func),
+	GROUP("jtag", SYSCTL_GPIOMODE, 4, 1, jtag_func),
+	GROUP("mdio", SYSCTL_GPIOMODE, 5, 1, mdio_func),
+	GROUP("sdram", SYSCTL_GPIOMODE, 6, 1, sdram_func),
+	GROUP("pci", SYSCTL_GPIOMODE, 7, 1, rt2880_pci_func),
 	GROUP_END
 };