svn commit: r308822 - in head/sys/arm: conf ti ti/am335x ti/omap4

Olivier Houchard cognet at FreeBSD.org
Sat Nov 19 01:51:58 UTC 2016


Author: cognet
Date: Sat Nov 19 01:51:56 2016
New Revision: 308822
URL: https://svnweb.freebsd.org/changeset/base/308822

Log:
  Resolv the remaining conflicting symbols between omap4 and am335x, and
  add omap4/pandaboard into the GENERIC kernel.

Modified:
  head/sys/arm/conf/GENERIC
  head/sys/arm/ti/am335x/am335x_scm_padconf.c
  head/sys/arm/ti/am335x/am335x_scm_padconf.h
  head/sys/arm/ti/omap4/omap4_scm_padconf.c
  head/sys/arm/ti/omap4/omap4_scm_padconf.h
  head/sys/arm/ti/ti_machdep.c
  head/sys/arm/ti/ti_pinmux.c

Modified: head/sys/arm/conf/GENERIC
==============================================================================
--- head/sys/arm/conf/GENERIC	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/conf/GENERIC	Sat Nov 19 01:51:56 2016	(r308822)
@@ -43,6 +43,7 @@ files		"../nvidia/tegra124/files.tegra12
 files		"../qemu/files.qemu"
 files		"../ti/files.ti"
 files		"../ti/am335x/files.am335x"
+files		"../ti/omap4/files.omap4"
 
 options 	SOC_ALLWINNER_A10
 options 	SOC_ALLWINNER_A13
@@ -53,6 +54,7 @@ options 	SOC_ALLWINNER_A83T
 options 	SOC_ALLWINNER_H3
 options 	SOC_BCM2836
 options		SOC_TI_AM335X
+options		SOC_OMAP4
 
 options 	SCHED_ULE		# ULE scheduler
 options 	SMP			# Enable multiple cores
@@ -80,6 +82,7 @@ device		pmu
 
 # ARM Generic Timer
 device		generic_timer
+device		mpcore_timer
 
 # MMC/SD/SDIO Card slot support
 device		sdhci			# SD controller
@@ -129,6 +132,9 @@ device		ti_i2c
 device		am335x_pmic		# AM335x Power Management IC (TPC65217)
 device		am335x_rtc		# RTC support (power management only)
 #define 	am335x_dmtpps		# Pulse Per Second capture driver
+device		twl			# TI TWLX0X0/TPS659x0 Power Management
+device		twl_vreg		# twl voltage regulation
+device		twl_clks		# twl external clocks
 
 # GPIO
 device		gpio
@@ -214,9 +220,12 @@ device		ti_pruss
 # Mailbox support
 device		ti_mbox
 
+# DMA controller
+device		ti_sdma
+
 # Extensible Firmware Interface
 options 	EFI
 
 # Flattened Device Tree
 options 	FDT			# Configure using FDT/DTB data
-makeoptions	MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/nvidia dtb/rpi"
+makeoptions	MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/nvidia dtb/rpi dtb/omap4"

Modified: head/sys/arm/ti/am335x/am335x_scm_padconf.c
==============================================================================
--- head/sys/arm/ti/am335x/am335x_scm_padconf.c	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/am335x/am335x_scm_padconf.c	Sat Nov 19 01:51:56 2016	(r308822)
@@ -293,7 +293,7 @@ const static struct ti_pinmux_padconf ti
 	{  .ballname = NULL  },
 };
 
-const struct ti_pinmux_device ti_pinmux_dev = {
+const struct ti_pinmux_device ti_am335x_pinmux_dev = {
 	.padconf_muxmode_mask	= 0x7,
 	.padconf_sate_mask	= 0x78,
 	.padstate		= ti_padstate_devmap,

Modified: head/sys/arm/ti/am335x/am335x_scm_padconf.h
==============================================================================
--- head/sys/arm/ti/am335x/am335x_scm_padconf.h	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/am335x/am335x_scm_padconf.h	Sat Nov 19 01:51:56 2016	(r308822)
@@ -42,4 +42,6 @@
 #define PADCONF_INPUT_PULLDOWN		(RXACTIVE)
 #define PADCONF_INPUT_PULLUP_SLOW	(PADCONF_INPUT_PULLUP | SLEWCTRL)
 
+extern const struct ti_pinmux_device ti_am335x_pinmux_dev;
+
 #endif /* AM335X_SCM_PADCONF_H */

Modified: head/sys/arm/ti/omap4/omap4_scm_padconf.c
==============================================================================
--- head/sys/arm/ti/omap4/omap4_scm_padconf.c	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/omap4/omap4_scm_padconf.c	Sat Nov 19 01:51:56 2016	(r308822)
@@ -295,7 +295,7 @@ const static struct ti_pinmux_padconf ti
 	{  .ballname = NULL  },
 };
 
-const struct ti_pinmux_device ti_pinmux_dev = {
+const struct ti_pinmux_device omap4_pinmux_dev = {
 	.padconf_muxmode_mask	= CONTROL_PADCONF_MUXMODE_MASK,
 	.padconf_sate_mask	= CONTROL_PADCONF_SATE_MASK,
 	.padstate		= ti_padstate_devmap,

Modified: head/sys/arm/ti/omap4/omap4_scm_padconf.h
==============================================================================
--- head/sys/arm/ti/omap4/omap4_scm_padconf.h	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/omap4/omap4_scm_padconf.h	Sat Nov 19 01:51:56 2016	(r308822)
@@ -78,4 +78,6 @@
                                         | CONTROL_PADCONF_OFF_PULL_ENABLE)
 #define PADCONF_PIN_OFF_WAKEUPENABLE	CONTROL_PADCONF_WAKEUP_ENABLE
 
+extern const struct ti_pinmux_device omap4_pinmux_dev;
+
 #endif /* OMAP4_SCM_PADCONF_H */

Modified: head/sys/arm/ti/ti_machdep.c
==============================================================================
--- head/sys/arm/ti/ti_machdep.c	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/ti_machdep.c	Sat Nov 19 01:51:56 2016	(r308822)
@@ -139,7 +139,7 @@ static platform_method_t omap4_methods[]
 #endif
 	PLATFORMMETHOD_END,
 };
-FDT_PLATFORM_DEF(omap4, "omap4", 0, "ti,omap4430", 0);
+FDT_PLATFORM_DEF(omap4, "omap4", 0, "ti,omap4430", 200);
 #endif
 
 #if defined(SOC_TI_AM335X)

Modified: head/sys/arm/ti/ti_pinmux.c
==============================================================================
--- head/sys/arm/ti/ti_pinmux.c	Sat Nov 19 01:36:44 2016	(r308821)
+++ head/sys/arm/ti/ti_pinmux.c	Sat Nov 19 01:51:56 2016	(r308822)
@@ -54,6 +54,9 @@ __FBSDID("$FreeBSD$");
 #include <dev/ofw/ofw_bus_subr.h>
 #include <dev/fdt/fdt_pinctrl.h>
 
+#include <arm/ti/omap4/omap4_scm_padconf.h>
+#include <arm/ti/am335x/am335x_scm_padconf.h>
+#include <arm/ti/ti_cpuid.h>
 #include "ti_pinmux.h"
 
 struct pincfg {
@@ -85,7 +88,7 @@ static struct ti_pinmux_softc *ti_pinmux
  *	files and is specific to the given SoC platform. Each entry in the array
  *	corresponds to an individual pin.
  */
-extern const struct ti_pinmux_device ti_pinmux_dev;
+static const struct ti_pinmux_device *ti_pinmux_dev;
 
 
 /**
@@ -101,7 +104,7 @@ ti_pinmux_padconf_from_name(const char *
 {
 	const struct ti_pinmux_padconf *padconf;
 
-	padconf = ti_pinmux_dev.padconf;
+	padconf = ti_pinmux_dev->padconf;
 	while (padconf->ballname != NULL) {
 		if (strcmp(ballname, padconf->ballname) == 0)
 			return(padconf);
@@ -134,7 +137,7 @@ ti_pinmux_padconf_set_internal(struct ti
 	uint16_t reg_val;
 
 	/* populate the new value for the PADCONF register */
-	reg_val = (uint16_t)(state & ti_pinmux_dev.padconf_sate_mask);
+	reg_val = (uint16_t)(state & ti_pinmux_dev->padconf_sate_mask);
 
 	/* find the new mode requested */
 	for (mode = 0; mode < 8; mode++) {
@@ -151,7 +154,7 @@ ti_pinmux_padconf_set_internal(struct ti
 	}
 
 	/* set the mux mode */
-	reg_val |= (uint16_t)(mode & ti_pinmux_dev.padconf_muxmode_mask);
+	reg_val |= (uint16_t)(mode & ti_pinmux_dev->padconf_muxmode_mask);
 
 	if (bootverbose)
 		device_printf(sc->sc_dev, "setting internal %x for %s\n",
@@ -226,11 +229,11 @@ ti_pinmux_padconf_get(const char *padnam
 
 	/* save the state */
 	if (state)
-		*state = (reg_val & ti_pinmux_dev.padconf_sate_mask);
+		*state = (reg_val & ti_pinmux_dev->padconf_sate_mask);
 
 	/* save the mode */
 	if (muxmode)
-		*muxmode = padconf->muxmodes[(reg_val & ti_pinmux_dev.padconf_muxmode_mask)];
+		*muxmode = padconf->muxmodes[(reg_val & ti_pinmux_dev->padconf_muxmode_mask)];
 
 	return (0);
 }
@@ -259,7 +262,7 @@ ti_pinmux_padconf_set_gpiomode(uint32_t 
 		return (ENXIO);
 
 	/* find the gpio pin in the padconf array */
-	padconf = ti_pinmux_dev.padconf;
+	padconf = ti_pinmux_dev->padconf;
 	while (padconf->ballname != NULL) {
 		if (padconf->gpio_pin == gpio)
 			break;
@@ -269,10 +272,10 @@ ti_pinmux_padconf_set_gpiomode(uint32_t 
 		return (EINVAL);
 
 	/* populate the new value for the PADCONF register */
-	reg_val = (uint16_t)(state & ti_pinmux_dev.padconf_sate_mask);
+	reg_val = (uint16_t)(state & ti_pinmux_dev->padconf_sate_mask);
 
 	/* set the mux mode */
-	reg_val |= (uint16_t)(padconf->gpio_mode & ti_pinmux_dev.padconf_muxmode_mask);
+	reg_val |= (uint16_t)(padconf->gpio_mode & ti_pinmux_dev->padconf_muxmode_mask);
 
 	/* write the register value (16-bit writes) */
 	ti_pinmux_write_2(ti_pinmux_sc, padconf->reg_off, reg_val);
@@ -304,7 +307,7 @@ ti_pinmux_padconf_get_gpiomode(uint32_t 
 		return (ENXIO);
 
 	/* find the gpio pin in the padconf array */
-	padconf = ti_pinmux_dev.padconf;
+	padconf = ti_pinmux_dev->padconf;
 	while (padconf->ballname != NULL) {
 		if (padconf->gpio_pin == gpio)
 			break;
@@ -317,12 +320,12 @@ ti_pinmux_padconf_get_gpiomode(uint32_t 
 	reg_val = ti_pinmux_read_2(ti_pinmux_sc, padconf->reg_off);
 
 	/* check to make sure the pins is configured as GPIO in the first state */
-	if ((reg_val & ti_pinmux_dev.padconf_muxmode_mask) != padconf->gpio_mode)
+	if ((reg_val & ti_pinmux_dev->padconf_muxmode_mask) != padconf->gpio_mode)
 		return (EINVAL);
 
 	/* read and store the reset of the state, i.e. pull-up, pull-down, etc */
 	if (state)
-		*state = (reg_val & ti_pinmux_dev.padconf_sate_mask);
+		*state = (reg_val & ti_pinmux_dev->padconf_sate_mask);
 
 	return (0);
 }
@@ -381,6 +384,22 @@ ti_pinmux_probe(device_t dev)
 		    __func__);
 		return (EEXIST);
 	}
+	switch (ti_chip()) {
+#ifdef SOC_OMAP4
+	case CHIP_OMAP_4:
+		ti_pinmux_dev = &omap4_pinmux_dev;
+		break;
+#endif
+#ifdef SOC_TI_AM335X
+	case CHIP_AM335X:
+		ti_pinmux_dev = &ti_am335x_pinmux_dev;
+		break;
+#endif
+	default:
+		printf("Unknown CPU in pinmux\n");
+		return (ENXIO);
+	}
+
 
 	device_set_desc(dev, "TI Pinmux Module");
 	return (BUS_PROBE_DEFAULT);


More information about the svn-src-all mailing list