svn commit: r298932 - in head/sys/dev/usb: . controller input misc net serial storage template wlan
Pedro F. Giffuni
pfg at FreeBSD.org
Mon May 2 17:44:07 UTC 2016
Author: pfg
Date: Mon May 2 17:44:03 2016
New Revision: 298932
URL: https://svnweb.freebsd.org/changeset/base/298932
Log:
dev/usb: minor spelling fixes in comments.
No functional change.
Reviewed by: hselasky
Modified:
head/sys/dev/usb/controller/at91dci.c
head/sys/dev/usb/controller/dwc_otg.c
head/sys/dev/usb/controller/ehci.c
head/sys/dev/usb/controller/ohci.c
head/sys/dev/usb/controller/uhci.c
head/sys/dev/usb/controller/xhcireg.h
head/sys/dev/usb/input/ums.c
head/sys/dev/usb/input/wsp.c
head/sys/dev/usb/misc/udbp.c
head/sys/dev/usb/net/if_cue.c
head/sys/dev/usb/net/if_rue.c
head/sys/dev/usb/net/if_urndis.c
head/sys/dev/usb/serial/ulpt.c
head/sys/dev/usb/serial/umcs.h
head/sys/dev/usb/serial/uvisor.c
head/sys/dev/usb/storage/rio500_usb.h
head/sys/dev/usb/storage/umass.c
head/sys/dev/usb/template/usb_template.c
head/sys/dev/usb/usb_cdc.h
head/sys/dev/usb/usb_dev.c
head/sys/dev/usb/usb_device.c
head/sys/dev/usb/usb_handle_request.c
head/sys/dev/usb/usb_hid.c
head/sys/dev/usb/usb_hub.c
head/sys/dev/usb/usb_transfer.c
head/sys/dev/usb/usbdevs
head/sys/dev/usb/usbdi.h
head/sys/dev/usb/wlan/if_run.c
Modified: head/sys/dev/usb/controller/at91dci.c
==============================================================================
--- head/sys/dev/usb/controller/at91dci.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/at91dci.c Mon May 2 17:44:03 2016 (r298932)
@@ -1330,7 +1330,7 @@ at91dci_clear_stall_sub(struct at91dci_s
/*
* NOTE: One would assume that a FIFO reset would release the
- * FIFO banks aswell, but it doesn't! We have to do this
+ * FIFO banks as well, but it doesn't! We have to do this
* manually!
*/
Modified: head/sys/dev/usb/controller/dwc_otg.c
==============================================================================
--- head/sys/dev/usb/controller/dwc_otg.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/dwc_otg.c Mon May 2 17:44:03 2016 (r298932)
@@ -3332,7 +3332,7 @@ dwc_otg_setup_standard_chain(struct usb_
* type in general, as a means to workaround
* that. This trick should work for both FULL and LOW
* speed USB traffic going through a TT. For non-TT
- * traffic it works aswell. The reason for using
+ * traffic it works as well. The reason for using
* CONTROL type instead of BULK is that some TTs might
* reject LOW speed BULK traffic.
*/
Modified: head/sys/dev/usb/controller/ehci.c
==============================================================================
--- head/sys/dev/usb/controller/ehci.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/ehci.c Mon May 2 17:44:03 2016 (r298932)
@@ -2995,7 +2995,7 @@ struct usb_device_descriptor ehci_devd =
UDPROTO_HSHUBSTT, /* protocol */
64, /* max packet */
{0}, {0}, {0x00, 0x01}, /* device id */
- 1, 2, 0, /* string indicies */
+ 1, 2, 0, /* string indexes */
1 /* # of configurations */
};
Modified: head/sys/dev/usb/controller/ohci.c
==============================================================================
--- head/sys/dev/usb/controller/ohci.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/ohci.c Mon May 2 17:44:03 2016 (r298932)
@@ -2043,7 +2043,7 @@ struct usb_device_descriptor ohci_devd =
UDPROTO_FSHUB, /* protocol */
64, /* max packet */
{0}, {0}, {0x00, 0x01}, /* device id */
- 1, 2, 0, /* string indicies */
+ 1, 2, 0, /* string indexes */
1 /* # of configurations */
};
Modified: head/sys/dev/usb/controller/uhci.c
==============================================================================
--- head/sys/dev/usb/controller/uhci.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/uhci.c Mon May 2 17:44:03 2016 (r298932)
@@ -2321,7 +2321,7 @@ struct usb_device_descriptor uhci_devd =
UDPROTO_FSHUB, /* protocol */
64, /* max packet */
{0}, {0}, {0x00, 0x01}, /* device id */
- 1, 2, 0, /* string indicies */
+ 1, 2, 0, /* string indexes */
1 /* # of configurations */
};
Modified: head/sys/dev/usb/controller/xhcireg.h
==============================================================================
--- head/sys/dev/usb/controller/xhcireg.h Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/controller/xhcireg.h Mon May 2 17:44:03 2016 (r298932)
@@ -45,16 +45,16 @@
#define XHCI_HCIVERSION 0x02 /* RO Interface version number */
#define XHCI_HCIVERSION_0_9 0x0090 /* xHCI version 0.9 */
#define XHCI_HCIVERSION_1_0 0x0100 /* xHCI version 1.0 */
-#define XHCI_HCSPARAMS1 0x04 /* RO structual parameters 1 */
+#define XHCI_HCSPARAMS1 0x04 /* RO structural parameters 1 */
#define XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xFF)
#define XHCI_HCS1_IRQ_MAX(x) (((x) >> 8) & 0x3FF)
#define XHCI_HCS1_N_PORTS(x) (((x) >> 24) & 0xFF)
-#define XHCI_HCSPARAMS2 0x08 /* RO structual parameters 2 */
+#define XHCI_HCSPARAMS2 0x08 /* RO structural parameters 2 */
#define XHCI_HCS2_IST(x) ((x) & 0xF)
#define XHCI_HCS2_ERST_MAX(x) (((x) >> 4) & 0xF)
#define XHCI_HCS2_SPR(x) (((x) >> 24) & 0x1)
#define XHCI_HCS2_SPB_MAX(x) (((x) >> 27) & 0x7F)
-#define XHCI_HCSPARAMS3 0x0C /* RO structual parameters 3 */
+#define XHCI_HCSPARAMS3 0x0C /* RO structural parameters 3 */
#define XHCI_HCS3_U1_DEL(x) ((x) & 0xFF)
#define XHCI_HCS3_U2_DEL(x) (((x) >> 16) & 0xFFFF)
#define XHCI_HCSPARAMS0 0x10 /* RO capability parameters */
Modified: head/sys/dev/usb/input/ums.c
==============================================================================
--- head/sys/dev/usb/input/ums.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/input/ums.c Mon May 2 17:44:03 2016 (r298932)
@@ -572,7 +572,7 @@ ums_attach(device_t dev)
* The Microsoft Wireless Notebook Optical Mouse seems to be in worse
* shape than the Wireless Intellimouse 2.0, as its X, Y, wheel, and
* all of its other button positions are all off. It also reports that
- * it has two addional buttons and a tilt wheel.
+ * it has two additional buttons and a tilt wheel.
*/
if (usb_test_quirk(uaa, UQ_MS_BAD_CLASS)) {
Modified: head/sys/dev/usb/input/wsp.c
==============================================================================
--- head/sys/dev/usb/input/wsp.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/input/wsp.c Mon May 2 17:44:03 2016 (r298932)
@@ -1040,7 +1040,7 @@ wsp_intr_callback(struct usb_xfer *xfer,
if (sc->o_ntouch != ntouch)
dx = dy = 0;
- /* Ignore unexpeted movment when typing */
+ /* Ignore unexpeted movement when typing */
if (ntouch == 1 && sc->index[0]->tool_major > 1200)
dx = dy = 0;
Modified: head/sys/dev/usb/misc/udbp.c
==============================================================================
--- head/sys/dev/usb/misc/udbp.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/misc/udbp.c Mon May 2 17:44:03 2016 (r298932)
@@ -744,7 +744,7 @@ ng_udbp_rcvdata(hook_p hook, item_p item
/*
* Do local shutdown processing..
- * We are a persistant device, we refuse to go away, and
+ * We are a persistent device, we refuse to go away, and
* only remove our links and reset ourself.
*/
static int
Modified: head/sys/dev/usb/net/if_cue.c
==============================================================================
--- head/sys/dev/usb/net/if_cue.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/net/if_cue.c Mon May 2 17:44:03 2016 (r298932)
@@ -47,7 +47,7 @@ __FBSDID("$FreeBSD$");
* RX filter uses a 512-bit multicast hash table, single perfect entry
* for the station address, and promiscuous mode. Unlike the ADMtek
* and KLSI chips, the CATC ASIC supports read and write combining
- * mode where multiple packets can be transfered using a single bulk
+ * mode where multiple packets can be transferred using a single bulk
* transaction, which helps performance a great deal.
*/
Modified: head/sys/dev/usb/net/if_rue.c
==============================================================================
--- head/sys/dev/usb/net/if_rue.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/net/if_rue.c Mon May 2 17:44:03 2016 (r298932)
@@ -693,7 +693,7 @@ rue_bulk_read_callback(struct usb_xfer *
usbd_copy_out(pc, actlen - 4, &status, sizeof(status));
actlen -= 4;
- /* check recieve packet was valid or not */
+ /* check receive packet was valid or not */
status = le16toh(status);
if ((status & RUE_RXSTAT_VALID) == 0) {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
Modified: head/sys/dev/usb/net/if_urndis.c
==============================================================================
--- head/sys/dev/usb/net/if_urndis.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/net/if_urndis.c Mon May 2 17:44:03 2016 (r298932)
@@ -709,7 +709,7 @@ urndis_ctrl_halt(struct urndis_softc *sc
}
/*
- * NB: Querying a device has the requirment of using an input buffer the size
+ * NB: Querying a device has the requirement of using an input buffer the size
* of the expected reply or larger, except for variably sized replies.
*/
static uint32_t
Modified: head/sys/dev/usb/serial/ulpt.c
==============================================================================
--- head/sys/dev/usb/serial/ulpt.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/serial/ulpt.c Mon May 2 17:44:03 2016 (r298932)
@@ -419,7 +419,7 @@ ulpt_open(struct usb_fifo *fifo, int ffl
if (sc->sc_fflags == 0) {
- /* reset USB paralell port */
+ /* reset USB parallel port */
ulpt_reset(sc);
}
Modified: head/sys/dev/usb/serial/umcs.h
==============================================================================
--- head/sys/dev/usb/serial/umcs.h Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/serial/umcs.h Mon May 2 17:44:03 2016 (r298932)
@@ -107,28 +107,28 @@
* 4, R/W */
#define MCS7840_DEV_REG_BI_FIFO_STAT1 0x32 /* Bulk-In FIFO Stat for Port
* 1, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BO_FIFO_STAT1 0x33 /* Bulk-out FIFO Stat for Port
* 1, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BI_FIFO_STAT2 0x34 /* Bulk-In FIFO Stat for Port
* 2, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BO_FIFO_STAT2 0x35 /* Bulk-out FIFO Stat for Port
* 2, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BI_FIFO_STAT3 0x36 /* Bulk-In FIFO Stat for Port
* 3, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BO_FIFO_STAT3 0x37 /* Bulk-out FIFO Stat for Port
* 3, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BI_FIFO_STAT4 0x38 /* Bulk-In FIFO Stat for Port
* 4, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_BO_FIFO_STAT4 0x39 /* Bulk-out FIFO Stat for Port
* 4, contains number of
- * availiable bytes, R/Only */
+ * available bytes, R/Only */
#define MCS7840_DEV_REG_ZERO_PERIOD1 0x3a /* Period between zero out
* frames for Port 1, R/W */
#define MCS7840_DEV_REG_ZERO_PERIOD2 0x3b /* Period between zero out
@@ -139,28 +139,28 @@
* frames for Port 1, R/W */
#define MCS7840_DEV_REG_ZERO_ENABLE 0x3e /* Enable/disable of zero out
* frames, R/W */
-#define MCS7840_DEV_REG_THR_VAL_LOW1 0x3f /* Low 8 bits of threshhold
+#define MCS7840_DEV_REG_THR_VAL_LOW1 0x3f /* Low 8 bits of threshold
* value for Bulk-Out for Port
* 1, R/W */
-#define MCS7840_DEV_REG_THR_VAL_HIGH1 0x40 /* High 1 bit of threshhold
+#define MCS7840_DEV_REG_THR_VAL_HIGH1 0x40 /* High 1 bit of threshold
* value for Bulk-Out and
* enable flag for Port 1, R/W */
-#define MCS7840_DEV_REG_THR_VAL_LOW2 0x41 /* Low 8 bits of threshhold
+#define MCS7840_DEV_REG_THR_VAL_LOW2 0x41 /* Low 8 bits of threshold
* value for Bulk-Out for Port
* 2, R/W */
-#define MCS7840_DEV_REG_THR_VAL_HIGH2 0x42 /* High 1 bit of threshhold
+#define MCS7840_DEV_REG_THR_VAL_HIGH2 0x42 /* High 1 bit of threshold
* value for Bulk-Out and
* enable flag for Port 2, R/W */
-#define MCS7840_DEV_REG_THR_VAL_LOW3 0x43 /* Low 8 bits of threshhold
+#define MCS7840_DEV_REG_THR_VAL_LOW3 0x43 /* Low 8 bits of threshold
* value for Bulk-Out for Port
* 3, R/W */
-#define MCS7840_DEV_REG_THR_VAL_HIGH3 0x44 /* High 1 bit of threshhold
+#define MCS7840_DEV_REG_THR_VAL_HIGH3 0x44 /* High 1 bit of threshold
* value for Bulk-Out and
* enable flag for Port 3, R/W */
-#define MCS7840_DEV_REG_THR_VAL_LOW4 0x45 /* Low 8 bits of threshhold
+#define MCS7840_DEV_REG_THR_VAL_LOW4 0x45 /* Low 8 bits of threshold
* value for Bulk-Out for Port
* 4, R/W */
-#define MCS7840_DEV_REG_THR_VAL_HIGH4 0x46 /* High 1 bit of threshhold
+#define MCS7840_DEV_REG_THR_VAL_HIGH4 0x46 /* High 1 bit of threshold
* value for Bulk-Out and
* enable flag for Port 4, R/W */
Modified: head/sys/dev/usb/serial/uvisor.c
==============================================================================
--- head/sys/dev/usb/serial/uvisor.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/serial/uvisor.c Mon May 2 17:44:03 2016 (r298932)
@@ -100,7 +100,7 @@ SYSCTL_INT(_hw_usb_uvisor, OID_AUTO, deb
/* From the Linux driver */
/*
* UVISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
- * are available to be transfered to the host for the specified endpoint.
+ * are available to be transferred to the host for the specified endpoint.
* Currently this is not used, and always returns 0x0001
*/
#define UVISOR_REQUEST_BYTES_AVAILABLE 0x01
Modified: head/sys/dev/usb/storage/rio500_usb.h
==============================================================================
--- head/sys/dev/usb/storage/rio500_usb.h Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/storage/rio500_usb.h Mon May 2 17:44:03 2016 (r298932)
@@ -5,7 +5,7 @@
Redistribution and use in source and binary forms, with or without
modification, are permitted under any licence of your choise which
- meets the open source licence definiton
+ meets the open source licence definition
http://www.opensource.org/opd.html such as the GNU licence or the
BSD licence.
Modified: head/sys/dev/usb/storage/umass.c
==============================================================================
--- head/sys/dev/usb/storage/umass.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/storage/umass.c Mon May 2 17:44:03 2016 (r298932)
@@ -2721,7 +2721,7 @@ umass_rbc_transform(struct umass_softc *
cmd_len = 12;
}
sc->sc_transfer.cmd_len = cmd_len;
- return (1); /* sucess */
+ return (1); /* success */
/* All other commands are not legal in RBC */
default:
Modified: head/sys/dev/usb/template/usb_template.c
==============================================================================
--- head/sys/dev/usb/template/usb_template.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/template/usb_template.c Mon May 2 17:44:03 2016 (r298932)
@@ -522,8 +522,8 @@ usb_make_device_desc(struct usb_temp_set
* usb_hw_ep_match
*
* Return values:
- * 0: The endpoint profile does not match the criterias
- * Else: The endpoint profile matches the criterias
+ * 0: The endpoint profile does not match the criteria
+ * Else: The endpoint profile matches the criteria
*------------------------------------------------------------------------*/
static uint8_t
usb_hw_ep_match(const struct usb_hw_ep_profile *pf,
Modified: head/sys/dev/usb/usb_cdc.h
==============================================================================
--- head/sys/dev/usb/usb_cdc.h Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_cdc.h Mon May 2 17:44:03 2016 (r298932)
@@ -161,7 +161,7 @@ struct usb_cdc_notification {
#define UCDC_NOTIFICATION_LENGTH 8
/*
- * Bits set in the SERIAL STATE notifcation (first byte of data)
+ * Bits set in the SERIAL STATE notification (first byte of data)
*/
#define UCDC_N_SERIAL_OVERRUN 0x40
Modified: head/sys/dev/usb/usb_dev.c
==============================================================================
--- head/sys/dev/usb/usb_dev.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_dev.c Mon May 2 17:44:03 2016 (r298932)
@@ -179,7 +179,7 @@ usb_loc_fill(struct usb_fs_privdata* pd,
*
* This function is used to atomically refer an USB device by its
* device location. If this function returns success the USB device
- * will not dissappear until the USB device is unreferenced.
+ * will not disappear until the USB device is unreferenced.
*
* Return values:
* 0: Success, refcount incremented on the given USB device.
Modified: head/sys/dev/usb/usb_device.c
==============================================================================
--- head/sys/dev/usb/usb_device.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_device.c Mon May 2 17:44:03 2016 (r298932)
@@ -190,7 +190,7 @@ usbd_get_ep_by_addr(struct usb_device *u
ea_val &= EA_MASK;
/*
- * Iterate accross all the USB endpoints searching for a match
+ * Iterate across all the USB endpoints searching for a match
* based on the endpoint address:
*/
for (; ep != ep_end; ep++) {
@@ -300,7 +300,7 @@ usbd_get_endpoint(struct usb_device *ude
}
/*
- * Iterate accross all the USB endpoints searching for a match
+ * Iterate across all the USB endpoints searching for a match
* based on the endpoint address. Note that we are searching
* the endpoints from the beginning of the "udev->endpoints" array.
*/
Modified: head/sys/dev/usb/usb_handle_request.c
==============================================================================
--- head/sys/dev/usb/usb_handle_request.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_handle_request.c Mon May 2 17:44:03 2016 (r298932)
@@ -313,7 +313,7 @@ tr_repeat:
case UR_SET_INTERFACE:
/*
* We assume that the endpoints are the same
- * accross the alternate settings.
+ * across the alternate settings.
*
* Reset the endpoints, because re-attaching
* only a part of the device is not possible.
Modified: head/sys/dev/usb/usb_hid.c
==============================================================================
--- head/sys/dev/usb/usb_hid.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_hid.c Mon May 2 17:44:03 2016 (r298932)
@@ -576,7 +576,7 @@ hid_report_size(const void *buf, usb_siz
for (d = hid_start_parse(buf, len, 1 << k); hid_get_item(d, &h);) {
if (h.kind == k) {
- /* check for ID-byte presense */
+ /* check for ID-byte presence */
if ((h.report_ID != 0) && !any_id) {
if (id != NULL)
*id = h.report_ID;
Modified: head/sys/dev/usb/usb_hub.c
==============================================================================
--- head/sys/dev/usb/usb_hub.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_hub.c Mon May 2 17:44:03 2016 (r298932)
@@ -1766,7 +1766,7 @@ done:
* The USB Transaction Translator:
* ===============================
*
- * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed
+ * When doing LOW- and FULL-speed USB transfers across a HIGH-speed
* USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT
* USB transfers. To utilize bandwidth dynamically the "scatter and
* gather" principle must be applied. This means that bandwidth must
@@ -1838,7 +1838,7 @@ usb_intr_find_best_slot(usb_size_t *ptr,
/*------------------------------------------------------------------------*
* usb_hs_bandwidth_adjust
*
- * This function will update the bandwith usage for the microframe
+ * This function will update the bandwidth usage for the microframe
* having index "slot" by "len" bytes. "len" can be negative. If the
* "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX"
* the "slot" argument will be replaced by the slot having least used
@@ -2310,7 +2310,7 @@ usb_needs_explore_all(void)
return;
}
/*
- * Explore all USB busses in parallell.
+ * Explore all USB busses in parallel.
*/
max = devclass_get_maxunit(dc);
while (max >= 0) {
Modified: head/sys/dev/usb/usb_transfer.c
==============================================================================
--- head/sys/dev/usb/usb_transfer.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usb_transfer.c Mon May 2 17:44:03 2016 (r298932)
@@ -615,7 +615,7 @@ usbd_transfer_setup_sub(struct usb_setup
/*
* NOTE: we do not allow "max_packet_size" or "max_frame_size"
* to be equal to zero when setting up USB transfers, hence
- * this leads to alot of extra code in the USB kernel.
+ * this leads to a lot of extra code in the USB kernel.
*/
if ((xfer->max_frame_size == 0) ||
@@ -2448,7 +2448,7 @@ done:
*
* This function is called when the DMA delay has been exectuded, and
* will make sure that the callback is called to complete the USB
- * transfer. This code path is ususally only used when there is an USB
+ * transfer. This code path is usually only used when there is an USB
* error like USB_ERR_CANCELLED.
*------------------------------------------------------------------------*/
void
Modified: head/sys/dev/usb/usbdevs
==============================================================================
--- head/sys/dev/usb/usbdevs Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usbdevs Mon May 2 17:44:03 2016 (r298932)
@@ -134,7 +134,7 @@ vendor MEGATRENDS 0x046b American Megatr
vendor LOGITECH 0x046d Logitech
vendor BTC 0x046e Behavior Tech. Computer
vendor PHILIPS 0x0471 Philips
-vendor SUN2 0x0472 Sun Microsystems (offical)
+vendor SUN2 0x0472 Sun Microsystems (official)
vendor SANYO 0x0474 Sanyo Electric
vendor SEAGATE 0x0477 Seagate
vendor CONNECTIX 0x0478 Connectix
Modified: head/sys/dev/usb/usbdi.h
==============================================================================
--- head/sys/dev/usb/usbdi.h Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/usbdi.h Mon May 2 17:44:03 2016 (r298932)
@@ -241,7 +241,7 @@ struct usb_config {
/*
* Use these macro when defining USB device ID arrays if you want to
* have your driver module automatically loaded in host, device or
- * both modes respectivly:
+ * both modes respectively:
*/
#if USB_HAVE_ID_SECTION
#define STRUCT_USB_HOST_ID \
Modified: head/sys/dev/usb/wlan/if_run.c
==============================================================================
--- head/sys/dev/usb/wlan/if_run.c Mon May 2 16:47:28 2016 (r298931)
+++ head/sys/dev/usb/wlan/if_run.c Mon May 2 17:44:03 2016 (r298932)
@@ -1030,7 +1030,7 @@ run_vap_delete(struct ieee80211vap *vap)
* There are numbers of functions need to be called in context thread.
* Rather than creating taskqueue event for each of those functions,
* here is all-for-one taskqueue callback function. This function
- * gurantees deferred functions are executed in the same order they
+ * guarantees deferred functions are executed in the same order they
* were enqueued.
* '& RUN_CMDQ_MASQ' is to loop cmdq[].
*/
@@ -3372,7 +3372,7 @@ run_tx(struct run_softc *sc, struct mbuf
/*
* Unlike PCI based devices, we don't get any interrupt from
* USB devices, so we simulate FIFO-is-full interrupt here.
- * Ralink recomends to drain FIFO stats every 100 ms, but 16 slots
+ * Ralink recommends to drain FIFO stats every 100 ms, but 16 slots
* quickly get fulled. To prevent overflow, increment a counter on
* every FIFO stat request, so we know how many slots are left.
* We do this only in HOSTAP or multiple vap mode since FIFO stats
@@ -4884,7 +4884,7 @@ run_update_beacon_cb(void *arg)
/*
* No need to call ieee80211_beacon_update(), run_update_beacon()
- * is taking care of apropriate calls.
+ * is taking care of appropriate calls.
*/
if (rvp->beacon_mbuf == NULL) {
rvp->beacon_mbuf = ieee80211_beacon_alloc(ni);
More information about the svn-src-all
mailing list