svn commit: r296105 - head/sys/arm/conf

[Andrew Turner]

Author: andrew
Date: Fri Feb 26 18:54:26 2016
New Revision: 296105
URL: https://svnweb.freebsd.org/changeset/base/296105

Log:
  Make the CUBIEBOARD config include the A10 config with a few needed
  additions. This is used by the release scripts so we need to keep it
  around for now.
  
  Sponsored by:	ABT Systems Ltd

Modified:
  head/sys/arm/conf/CUBIEBOARD

Modified: head/sys/arm/conf/CUBIEBOARD
==============================================================================
--- head/sys/arm/conf/CUBIEBOARD	Fri Feb 26 18:52:06 2016	(r296104)
+++ head/sys/arm/conf/CUBIEBOARD	Fri Feb 26 18:54:26 2016	(r296105)
@@ -19,97 +19,15 @@
 #
 # $FreeBSD$
 
-ident		CUBIEBOARD
-
-include 	"std.armv6"
-include 	"../allwinner/std.a10"
-
-options 	SOC_ALLWINNER_A10
-
-options 	HZ=100
-options 	SCHED_4BSD		# 4BSD scheduler
-options 	PLATFORM
-
-# Debugging for use in -current
-makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
-options 	ALT_BREAK_TO_DEBUGGER
-#options 	VERBOSE_SYSINIT		# Enable verbose sysinit messages
-options 	KDB			# Enable kernel debugger support
-# For minimum debugger support (stable branch) use:
-#options 	KDB_TRACE		# Print a stack trace for a panic
-# For full debugger support use this instead:
-options 	DDB			# Enable the kernel debugger
-options 	INVARIANTS		# Enable calls of extra sanity checking
-options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
-options 	WITNESS			# Enable checks to detect deadlocks and cycles
-options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
-#options 	DIAGNOSTIC
+#NO_UNIVERSE
 
-# NFS root from boopt/dhcp
-#options 	BOOTP
-#options 	BOOTP_NFSROOT
-#options 	BOOTP_COMPAT
-#options 	BOOTP_NFSV3
-#options 	BOOTP_WIRED_TO=cpsw0
+include 	"A10"
+ident		CUBIEBOARD
 
 # Boot device is 2nd slice on MMC/SD card
 options 	ROOTDEVNAME=\"ufs:/dev/da0s2\"
 
-# MMC/SD/SDIO Card slot support
-device		mmc			# mmc/sd bus
-device		mmcsd			# mmc/sd flash cards
-
-# ATA controllers
-device		ahci			# AHCI-compatible SATA controllers
-#device		ata			# Legacy ATA/SATA controllers
-
-# Console and misc
-device		uart
-device		uart_ns8250
-device		pty
-device		snp
-device		md
-device		random			# Entropy device
-
-# I2C support
-#device		iicbus
-#device		iic
-
-# GPIO
-device		gpio
-
-device		scbus			# SCSI bus (required for ATA/SCSI)
-device		da			# Direct Access (disks)
-device		pass			# Passthrough device (direct ATA/SCSI access)
-
-# USB support
-options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
-device		usb
-options 	USB_DEBUG
-#options 	USB_REQ_DEBUG
-#options 	USB_VERBOSE
-#device		uhci
-#device		ohci
-device		ehci
-
-device		umass
-
-# Ethernet
-device		loop
-device		ether
-device		mii
-device		bpf
-
-device		emac
-
-# USB ethernet support, requires miibus
-device		miibus
-
-# Pinmux
-device		fdt_pinctrl
-
 # Flattened Device Tree
-options 	FDT			# Configure using FDT/DTB data
+options 	FDT
 options 	FDT_DTB_STATIC
 makeoptions	FDT_DTS_FILE=cubieboard.dts
-makeoptions	MODULES_EXTRA=dtb/allwinner