svn commit: r295528 - stable/10/sys/dev/ixgbe
Steven Hartland
smh at FreeBSD.org
Thu Feb 11 16:54:25 UTC 2016
Author: smh
Date: Thu Feb 11 16:54:23 2016
New Revision: 295528
URL: https://svnweb.freebsd.org/changeset/base/295528
Log:
MFC r294734, r295093 & r295094 ixgbe fixes
MFC r294734
Fix ixgbe compliation with DBG 1
MFC r295093
Configure ixgbe phy & gbic power
MFC r295094
Fix ixgbe flow control autoneg reporting
Approved by: re (marius)
Sponsored by: Multiplay
Modified:
stable/10/sys/dev/ixgbe/if_ix.c
stable/10/sys/dev/ixgbe/ixgbe_common.c
stable/10/sys/dev/ixgbe/ixgbe_osdep.h
stable/10/sys/dev/ixgbe/ixgbe_phy.c
stable/10/sys/dev/ixgbe/ixgbe_type.h
stable/10/sys/dev/ixgbe/ixgbe_x540.c
stable/10/sys/dev/ixgbe/ixgbe_x550.c
Directory Properties:
stable/10/ (props changed)
Modified: stable/10/sys/dev/ixgbe/if_ix.c
==============================================================================
--- stable/10/sys/dev/ixgbe/if_ix.c Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/if_ix.c Thu Feb 11 16:54:23 2016 (r295528)
@@ -582,6 +582,12 @@ ixgbe_attach(device_t dev)
if (error)
goto err_late;
+ /* Enable the optics for 82599 SFP+ fiber */
+ ixgbe_enable_tx_laser(hw);
+
+ /* Enable power to the phy. */
+ ixgbe_set_phy_power(hw, TRUE);
+
/* Setup OS specific network interface */
if (ixgbe_setup_interface(dev, adapter) != 0)
goto err_late;
@@ -1250,6 +1256,9 @@ ixgbe_init_locked(struct adapter *adapte
device_printf(dev, "Error setting up EEE: %d\n", err);
}
+ /* Enable power to the phy. */
+ ixgbe_set_phy_power(hw, TRUE);
+
/* Config/Enable Link */
ixgbe_config_link(adapter);
@@ -3970,6 +3979,9 @@ ixgbe_setup_low_power_mode(struct adapte
mtx_assert(&adapter->core_mtx, MA_OWNED);
+ if (!hw->wol_enabled)
+ ixgbe_set_phy_power(hw, FALSE);
+
/* Limit power management flow to X550EM baseT */
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T
&& hw->phy.ops.enter_lplu) {
Modified: stable/10/sys/dev/ixgbe/ixgbe_common.c
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_common.c Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_common.c Thu Feb 11 16:54:23 2016 (r295528)
@@ -199,9 +199,12 @@ bool ixgbe_device_supports_autoneg_fc(st
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ if (!supported) {
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
"Device %x does not support flow control autoneg",
hw->device_id);
+ }
+
return supported;
}
Modified: stable/10/sys/dev/ixgbe/ixgbe_osdep.h
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_osdep.h Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_osdep.h Thu Feb 11 16:54:23 2016 (r295528)
@@ -57,6 +57,15 @@
#define ASSERT(x) if(!(x)) panic("IXGBE: x")
#define EWARN(H, W, S) printf(W)
+enum {
+ IXGBE_ERROR_SOFTWARE,
+ IXGBE_ERROR_POLLING,
+ IXGBE_ERROR_INVALID_STATE,
+ IXGBE_ERROR_UNSUPPORTED,
+ IXGBE_ERROR_ARGUMENT,
+ IXGBE_ERROR_CAUTION,
+};
+
/* The happy-fun DELAY macro is defined in /usr/src/sys/i386/include/clock.h */
#define usec_delay(x) DELAY(x)
#define msec_delay(x) DELAY(1000*(x))
@@ -73,9 +82,23 @@
#define DEBUGOUT5(S,A,B,C,D,E) printf(S "\n",A,B,C,D,E)
#define DEBUGOUT6(S,A,B,C,D,E,F) printf(S "\n",A,B,C,D,E,F)
#define DEBUGOUT7(S,A,B,C,D,E,F,G) printf(S "\n",A,B,C,D,E,F,G)
- #define ERROR_REPORT1(S,A) printf(S "\n",A)
- #define ERROR_REPORT2(S,A,B) printf(S "\n",A,B)
- #define ERROR_REPORT3(S,A,B,C) printf(S "\n",A,B,C)
+ #define ERROR_REPORT1 ERROR_REPORT
+ #define ERROR_REPORT2 ERROR_REPORT
+ #define ERROR_REPORT3 ERROR_REPORT
+ #define ERROR_REPORT(level, format, arg...) do { \
+ switch (level) { \
+ case IXGBE_ERROR_SOFTWARE: \
+ case IXGBE_ERROR_CAUTION: \
+ case IXGBE_ERROR_POLLING: \
+ case IXGBE_ERROR_INVALID_STATE: \
+ case IXGBE_ERROR_UNSUPPORTED: \
+ case IXGBE_ERROR_ARGUMENT: \
+ device_printf(ixgbe_dev_from_hw(hw), format, ## arg); \
+ break; \
+ default: \
+ break; \
+ } \
+ } while (0)
#else
#define DEBUGOUT(S)
#define DEBUGOUT1(S,A)
Modified: stable/10/sys/dev/ixgbe/ixgbe_phy.c
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_phy.c Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_phy.c Thu Feb 11 16:54:23 2016 (r295528)
@@ -2734,6 +2734,9 @@ s32 ixgbe_set_copper_phy_power(struct ix
u32 status;
u16 reg;
+ if (!on && ixgbe_mng_present(hw))
+ return 0;
+
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
®);
Modified: stable/10/sys/dev/ixgbe/ixgbe_type.h
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_type.h Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_type.h Thu Feb 11 16:54:23 2016 (r295528)
@@ -1479,7 +1479,10 @@ struct ixgbe_dmac_config {
#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK 0xFF01 /* int chip-wide mask */
#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG 0xFC01 /* int chip-wide mask */
#define IXGBE_MDIO_GLOBAL_ALARM_1 0xCC00 /* Global alarm 1 */
+#define IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT 0x0010 /* device fault */
#define IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL 0x4000 /* high temp failure */
+#define IXGBE_MDIO_GLOBAL_FAULT_MSG 0xC850 /* Global Fault Message */
+#define IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP 0x8007 /* high temp failure */
#define IXGBE_MDIO_GLOBAL_INT_MASK 0xD400 /* Global int mask */
#define IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN 0x1000 /* autoneg vendor alarm int enable */
#define IXGBE_MDIO_GLOBAL_ALARM_1_INT 0x4 /* int in Global alarm 1 */
Modified: stable/10/sys/dev/ixgbe/ixgbe_x540.c
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_x540.c Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_x540.c Thu Feb 11 16:54:23 2016 (r295528)
@@ -82,8 +82,7 @@ s32 ixgbe_init_ops_X540(struct ixgbe_hw
/* PHY */
phy->ops.init = ixgbe_init_phy_ops_generic;
phy->ops.reset = NULL;
- if (!ixgbe_mng_present(hw))
- phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
+ phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
/* MAC */
mac->ops.reset_hw = ixgbe_reset_hw_X540;
Modified: stable/10/sys/dev/ixgbe/ixgbe_x550.c
==============================================================================
--- stable/10/sys/dev/ixgbe/ixgbe_x550.c Thu Feb 11 16:43:23 2016 (r295527)
+++ stable/10/sys/dev/ixgbe/ixgbe_x550.c Thu Feb 11 16:54:23 2016 (r295528)
@@ -965,7 +965,7 @@ void ixgbe_restore_mdd_vf_X550(struct ix
num_qs = 4; /* 32 VFs / pools */
bitmask = 0x0000000F;
break;
- default: /* 64 VFs / pools */
+ default: /* 64 VFs / pools */
num_qs = 2;
bitmask = 0x00000003;
break;
@@ -1264,7 +1264,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(s
IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
return status;
- /* High temperature failure alarm triggered */
+ /* Global alarm triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
®);
@@ -1277,6 +1277,21 @@ static s32 ixgbe_get_lasi_ext_t_x550em(s
/* power down the PHY in case the PHY FW didn't already */
ixgbe_set_copper_phy_power(hw, FALSE);
return IXGBE_ERR_OVERTEMP;
+ } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
+ /* device fault alarm triggered */
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* if device fault was due to high temp alarm handle and exit */
+ if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
+ /* power down the PHY in case the PHY FW didn't */
+ ixgbe_set_copper_phy_power(hw, FALSE);
+ return IXGBE_ERR_OVERTEMP;
+ }
}
/* Vendor alarm 2 triggered */
More information about the svn-src-all
mailing list