svn commit: r298167 - vendor/openresolv/dist
Pedro F. Giffuni
pfg at FreeBSD.org
Sun Apr 17 21:55:11 UTC 2016
Author: pfg
Date: Sun Apr 17 21:55:09 2016
New Revision: 298167
URL: https://svnweb.freebsd.org/changeset/base/298167
Log:
Import openresolv 3.8.0
Obtained from: http://roy.marples.name/projects/openresolv
Modified:
vendor/openresolv/dist/Makefile
vendor/openresolv/dist/configure
vendor/openresolv/dist/dnsmasq.in
vendor/openresolv/dist/libc.in
vendor/openresolv/dist/named.in
vendor/openresolv/dist/resolvconf.8.in
vendor/openresolv/dist/resolvconf.conf.5.in
vendor/openresolv/dist/resolvconf.in
vendor/openresolv/dist/unbound.in
Modified: vendor/openresolv/dist/Makefile
==============================================================================
--- vendor/openresolv/dist/Makefile Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/Makefile Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,5 +1,4 @@
PKG= openresolv
-VERSION= 3.7.3
# Nasty hack so that make clean works without configure being run
_CONFIG_MK!= test -e config.mk && echo config.mk || echo config-null.mk
@@ -10,14 +9,12 @@ SBINDIR?= /sbin
SYSCONFDIR?= /etc
LIBEXECDIR?= /libexec/resolvconf
VARDIR?= /var/run/resolvconf
-RCDIR?= /etc/rc.d
-RESTARTCMD?= if ${RCDIR}/\1 status >/dev/null 2>\&1; then \
- ${RCDIR}/\1 restart; \
- fi
INSTALL?= install
SED?= sed
+VERSION!= ${SED} -n 's/OPENRESOLV_VERSION="\(.*\)".*/\1/p' resolvconf.in
+
BINMODE?= 0755
DOCMODE?= 0644
MANMODE?= 0444
@@ -33,7 +30,9 @@ SED_SYSCONFDIR= -e 's:@SYSCONFDIR@:${SY
SED_LIBEXECDIR= -e 's:@LIBEXECDIR@:${LIBEXECDIR}:g'
SED_VARDIR= -e 's:@VARDIR@:${VARDIR}:g'
SED_RCDIR= -e 's:@RCDIR@:${RCDIR}:g'
-SED_RESTARTCMD= -e 's:@RESTARTCMD \(.*\)@:${RESTARTCMD}:g'
+SED_RESTARTCMD= -e 's:@RESTARTCMD@:${RESTARTCMD}:g'
+SED_RCDIR= -e 's:@RCDIR@:${RCDIR}:g'
+SED_STATUSARG= -e 's:@STATUSARG@:${STATUSARG}:g'
DISTPREFIX?= ${PKG}-${VERSION}
DISTFILEGZ?= ${DISTPREFIX}.tar.gz
@@ -44,9 +43,10 @@ FOSSILID?= current
all: ${TARGET}
-.in:
+.in: Makefile ${CONFIG_MK}
${SED} ${SED_SBINDIR} ${SED_SYSCONFDIR} ${SED_LIBEXECDIR} \
- ${SED_VARDIR} ${SED_RCDIR} ${SED_RESTARTCMD} \
+ ${SED_VARDIR} \
+ ${SED_RCDIR} ${SED_RESTARTCMD} ${SED_RCDIR} ${SED_STATUSARG} \
$< > $@
clean:
Modified: vendor/openresolv/dist/configure
==============================================================================
--- vendor/openresolv/dist/configure Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/configure Sun Apr 17 21:55:09 2016 (r298167)
@@ -8,6 +8,7 @@ HOST=
TARGET=
RESTARTCMD=
RCDIR=
+STATUSARG=
for x do
opt=${x%%=*}
@@ -33,6 +34,8 @@ for x do
--target) TARGET=$var;;
--libdir) LIBDIR=$var;;
--restartcmd) RESTARTCMD=$var;;
+ --rcdir) RCDIR=$var;;
+ --statusarg) STATUSARG=$var;;
--includedir) eval INCLUDEDIR="$INCLUDEDIR${INCLUDEDIR:+ }$var";;
--datadir|--infodir) ;; # ignore autotools
--disable-maintainer-mode|--disable-dependency-tracking) ;;
@@ -117,7 +120,17 @@ echo "Configuring openresolv for ... $OS
rm -rf $CONFIG_MK
echo "# $OS" >$CONFIG_MK
-for x in SYSCONFDIR SBINDIR LIBEXECDIR VARDIR MANDIR; do
+# On FreeBSD, /etc/init.d/foo status returns 0 if foo is not enabled
+# regardless of if it's not running.
+# So we force onestatus to work around this silly bug.
+if [ -z "$STATUSARG" ]; then
+ case "$OS" in
+ freebsd*) STATUSARG="onestatus";;
+ esac
+fi
+
+for x in SYSCONFDIR SBINDIR LIBEXECDIR VARDIR MANDIR RESTARTCMD RCDIR STATUSARG
+do
eval v=\$$x
# Make files look nice for import
l=$((10 - ${#x}))
@@ -126,96 +139,6 @@ for x in SYSCONFDIR SBINDIR LIBEXECDIR V
echo "$x=$t $v" >>$CONFIG_MK
done
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for systemd ... "
- if [ -x /bin/systemctl ]; then
- RESTARTCMD="/bin/systemctl try-restart \1"
- echo "yes"
- elif [ -x /usr/bin/systemctl ]; then
- RESTARTCMD="/usr/bin/systemctl try-restart \1"
- echo "yes"
- else
- echo "no"
- fi
-fi
-
-# Arch upgraded to systemd, so this check has to be just after systemd
-# but higher than the others
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for Arch ... "
- if [ -e /etc/arch-release -a -d /etc/rc.d ]; then
- RCDIR=/etc/rc.d
- RESTARTCMD="[ -e /var/run/daemons/\1 ] \&\& /etc/rc.d/\1 restart"
- echo "yes"
- else
- echo "no"
- fi
-fi
-
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for OpenRC ... "
- if [ -x /sbin/rc-service ]; then
- RESTARTCMD="if /sbin/rc-service -e \1; then /sbin/rc-service \1 -- -Ds restart; fi"
- echo "yes"
- else
- echo "no"
- fi
-fi
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for invoke-rc.d ... "
- if [ -x /usr/sbin/invoke-rc.d ]; then
- RCDIR=/etc/init.d
- RESTARTCMD="if /usr/sbin/invoke-rc.d --quiet \1 status >/dev/null 2>\&1; then /usr/sbin/invoke-rc.d \1 restart; fi"
- echo "yes"
- else
- echo "no"
- fi
-fi
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for service ... "
- if [ -x /sbin/service ]; then
- RCDIR=/etc/init.d
- RESTARTCMD="if /sbin/service \1; then /sbin/service \1 restart; fi"
- echo "yes"
- else
- echo "no"
- fi
-fi
-if [ -z "$RESTARTCMD" ]; then
- printf "Checking for runit... "
- if [ -x /bin/sv ]; then
- RESTARTCMD="/bin/sv try-restart \1"
- echo "yes"
- elif [ -x /usr/bin/sv ]; then
- RESTARTCMD="/usr/bin/sv try-restart \1"
- echo "yes"
- else
- echo "no"
- fi
-fi
-if [ -z "$RESTARTCMD" ]; then
- for x in /etc/init.d/rc.d /etc/rc.d /etc/init.d; do
- printf "Checking for $x ... "
- if [ -d $x ]; then
- RCDIR=$x
- RESTARTCMD="if $x/\1 status >/dev/null 2>\&1; then $x/\1 restart; fi"
- echo "yes"
- break
- else
- echo "no"
- fi
- done
-fi
-
-if [ -z "$RESTARTCMD" ]; then
- echo "$0: WARNING: No means of interacting with system services detected!"
- exit 1
-fi
-
-echo "RCDIR= $RCDIR" >>$CONFIG_MK
-# Work around bug in the dash shell as "echo 'foo \1'" does bad things
-printf "%s\n" "RESTARTCMD= $RESTARTCMD" >>$CONFIG_MK
-
echo
echo " SYSCONFDIR = $SYSCONFDIR"
echo " SBINDIR = $SBINDIR"
@@ -223,3 +146,7 @@ echo " LIBEXECDIR = $LIBEXECDIR"
echo " VARDIR = $RUNDIR"
echo " MANDIR = $MANDIR"
echo
+echo " RESTARTCMD = $RESTARTCMD"
+echo " RCDIR = $RCDIR"
+echo " STATUSARG = $STATUSARG"
+echo
Modified: vendor/openresolv/dist/dnsmasq.in
==============================================================================
--- vendor/openresolv/dist/dnsmasq.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/dnsmasq.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,5 +1,5 @@
#!/bin/sh
-# Copyright (c) 2007-2012 Roy Marples
+# Copyright (c) 2007-2016 Roy Marples
# All rights reserved
# dnsmasq subscriber for resolvconf
@@ -37,7 +37,6 @@ NL="
[ -s "$dnsmasq_pid" ] || dnsmasq_pid=/var/run/dnsmasq/dnsmasq.pid
[ -s "$dnsmasq_pid" ] || unset dnsmasq_pid
: ${dnsmasq_service:=dnsmasq}
-: ${dnsmasq_restart:=@RESTARTCMD ${dnsmasq_service}@}
newconf="# Generated by resolvconf$NL"
newresolv="$newconf"
@@ -180,7 +179,15 @@ if [ -n "$dnsmasq_resolv" ]; then
fi
if $changed; then
- eval $dnsmasq_restart
+ # dnsmasq does not re-read the configuration file on SIGHUP
+ if [ -n "$dnsmasq_restart" ]; then
+ eval $dnsmasq_restart
+ elif [ -n "$RESTARTCMD" ]; then
+ set -- ${dnsmasq_service}
+ eval $RESTARTCMD
+ else
+ @SBINDIR@/resolvconf -r ${dnsmasq_service}
+ fi
fi
if $dbus; then
if [ -s "$dnsmasq_pid" ]; then
Modified: vendor/openresolv/dist/libc.in
==============================================================================
--- vendor/openresolv/dist/libc.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/libc.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,5 +1,5 @@
#!/bin/sh
-# Copyright (c) 2007-2014 Roy Marples
+# Copyright (c) 2007-2016 Roy Marples
# All rights reserved
# libc subscriber for resolvconf
@@ -97,7 +97,6 @@ elif [ -d "$SYSCONFDIR"/resolvconf ]; th
fi
: ${resolv_conf:=/etc/resolv.conf}
: ${libc_service:=nscd}
-: ${libc_restart:=@RESTARTCMD ${libc_service}@}
: ${list_resolv:=@SBINDIR@/resolvconf -l}
if [ "${resolv_conf_head-x}" = x -a -f "$SYSCONFDIR"/resolv.conf.head ]; then
resolv_conf_head="$(cat "${SYSCONFDIR}"/resolv.conf.head)"
@@ -229,7 +228,14 @@ fi
# Create our resolv.conf now
(umask 022; printf %s "$newconf" >"$resolv_conf")
-eval $libc_restart
+if [ -n "$libc_restart" ]; then
+ eval $libc_restart
+elif [ -n "$RESTARTCMD" ]; then
+ set -- ${libc_service}
+ eval $RESTARTCMD
+else
+ @SBINDIR@/resolvconf -r ${libc_service}
+fi
retval=0
# Notify users of the resolver
Modified: vendor/openresolv/dist/named.in
==============================================================================
--- vendor/openresolv/dist/named.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/named.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,5 +1,5 @@
#!/bin/sh
-# Copyright (c) 2007-2012 Roy Marples
+# Copyright (c) 2007-2016 Roy Marples
# All rights reserved
# named subscriber for resolvconf
@@ -35,18 +35,22 @@ NL="
# Platform specific kludges
if [ -z "$named_service" -a -z "$named_restart" -a \
- -d "@RCDIR@" -a ! -x "@RCDIR@"/named ]
+ -d "$RCDIR" -a ! -x "$RCDIR"/named ]
then
- if [ -x "@RCDIR@"/bind9 ]; then
+ if [ -x "$RCDIR"/bind9 ]; then
# Debian and derivatives
named_service=bind9
- elif [ -x "@RCDIR@"/rc.bind ]; then
+ elif [ -x "$RCDIR"/rc.bind ]; then
# Slackware
named_service=rc.bind
fi
fi
: ${named_service:=named}
-: ${named_restart:=@RESTARTCMD ${named_service}@}
+
+: ${named_pid:=/var/run/$named_service.pid}
+[ -s "$named_pid" ] || named_pid=/var/run/$named_service/$named_service.pid
+[ -s "$named_pid" ] || unset named_pid
+
newoptions="# Generated by resolvconf$NL"
newzones="$newoptions"
@@ -101,6 +105,14 @@ if [ -n "$named_zones" ]; then
fi
fi
+# named does not seem to work with SIGHUP which is a same
if $changed; then
- eval $named_restart
+ if [ -n "$named_restart" ]; then
+ eval $named_restart
+ elif [ -n "$RESTARTCMD" ]; then
+ set -- ${named_service}
+ eval $RESTARTCMD
+ else
+ @SBINDIR@/resolvconf -r ${named_service}
+ fi
fi
Modified: vendor/openresolv/dist/resolvconf.8.in
==============================================================================
--- vendor/openresolv/dist/resolvconf.8.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/resolvconf.8.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2015 Roy Marples
+.\" Copyright (c) 2007-2016 Roy Marples
.\" All rights reserved
.\"
.\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
-.Dd April 27, 2015
+.Dd February 23, 2016
.Dt RESOLVCONF 8
.Os
.Sh NAME
@@ -125,24 +125,28 @@ file(s) for all the
on the
.Ar interface .
.Pp
-Here are some more options that
-.Nm
-has:-
+Here are some options for the above commands:-
.Bl -tag -width indent
-.It Fl I
-Initialise the state directory
-.Pa @VARDIR@ .
-This only needs to be called if the initial system boot sequence does not
-automatically clean it out; for example the state directory is moved
-somewhere other than
-.Pa /var/run .
-If used, it should only be called once as early in the system boot sequence
-as possible and before
-.Nm
-is used to add interfaces.
.It Fl f
Ignore non existant interfaces.
Only really useful for deleting interfaces.
+.It Fl m Ar metric
+Set the metric of the interface when adding it, default of 0.
+Lower metrics take precedence.
+This affects the default order of interfaces when listed.
+.It Fl p
+Marks the interface
+.Pa resolv.conf
+as private.
+.It Fl x
+Mark the interface
+.Pa resolv.conf
+as exclusive when adding, otherwise only use the latest exclusive interface.
+.El
+.Pp
+.Nm
+has some more commands for general usage:-
+.Bl -tag -width indent
.It Fl i Ar pattern
List the interfaces and protocols, optionally matching
.Ar pattern ,
@@ -157,14 +161,6 @@ If
.Ar pattern
is specified then we list the files for the interfaces and protocols
that match it.
-.It Fl m Ar metric
-Set the metric of the interface when adding it, default of 0.
-Lower metrics take precedence.
-This affects the default order of interfaces when listed.
-.It Fl p
-Marks the interface
-.Pa resolv.conf
-as private.
.It Fl u
Force
.Nm
@@ -172,15 +168,31 @@ to update all its subscribers.
.Nm
does not update the subscribers when adding a resolv.conf that matches
what it already has for that interface.
-.It Fl x
-Mark the interface
-.Pa resolv.conf
-as exclusive when adding, otherwise only use the latest exclusive interface.
.El
.Pp
.Nm
-also has some options designed to be used by its subscribers:-
+also has some commands designed to be used by it's subscribers and
+system startup:-
.Bl -tag -width indent
+.It Fl I
+Initialise the state directory
+.Pa @VARDIR@ .
+This only needs to be called if the initial system boot sequence does not
+automatically clean it out; for example the state directory is moved
+somewhere other than
+.Pa /var/run .
+If used, it should only be called once as early in the system boot sequence
+as possible and before
+.Nm
+is used to add interfaces.
+.It Fl R
+Echo the command used to restart a service.
+.It Fl r Ar service
+If the
+.Ar service
+is running then restart it.
+If the service does not exist or is not running then zero is returned,
+otherwise the result of restarting the service.
.It Fl v
Echo variables DOMAINS, SEARCH and NAMESERVERS so that the subscriber can
configure the resolver easily.
Modified: vendor/openresolv/dist/resolvconf.conf.5.in
==============================================================================
--- vendor/openresolv/dist/resolvconf.conf.5.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/resolvconf.conf.5.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -22,7 +22,7 @@
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
-.Dd February 21, 2016
+.Dd February 23, 2016
.Dt RESOLVCONF.CONF 5
.Os
.Sh NAME
@@ -284,23 +284,23 @@ variables, documented below.
.Pp
.Bl -tag -width indent
.It Sy dnsmasq_service
-Location of the dnsmasq service.
+Name of the dnsmasq service.
.It Sy dnsmasq_restart
Command to restart the dnsmasq service.
.It Sy dnsmasq_pid
Location of the dnsmasq pidfile.
.It Sy libc_service
-Location of the libc service.
+Name of the libc service.
.It Sy libc_restart
Command to restart the libc service.
.It Sy named_service
-Location of the named service.
+Name of the named service.
.It Sy named_restart
Command to restart the named service.
.It Sy pdnsd_restart
Command to restart the pdnsd service.
.It Sy unbound_service
-Location of the unbound service.
+Name of the unbound service.
.It Sy unbound_restart
Command to restart the unbound service.
.It Sy unbound_pid
Modified: vendor/openresolv/dist/resolvconf.in
==============================================================================
--- vendor/openresolv/dist/resolvconf.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/resolvconf.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -25,9 +25,12 @@
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
RESOLVCONF="$0"
+OPENRESOLV_VERSION="3.8.0"
SYSCONFDIR=@SYSCONFDIR@
LIBEXECDIR=@LIBEXECDIR@
VARDIR=@VARDIR@
+RCDIR=@RCDIR@
+RESTARTCMD=@RESTARTCMD@
# Disregard dhcpcd setting
unset interface_order state_dir
@@ -71,55 +74,45 @@ error_exit()
usage()
{
cat <<-EOF
- Usage: ${RESOLVCONF##*/} [options]
+ Usage: ${RESOLVCONF##*/} [options] command [argument]
Inform the system about any DNS updates.
- Options:
+ Commands:
-a \$INTERFACE Add DNS information to the specified interface
(DNS supplied via stdin in resolv.conf format)
- -m metric Give the added DNS information a metric
- -p Mark the interface as private
- -x Mark the interface as exclusive
-d \$INTERFACE Delete DNS information from the specified interface
- -f Ignore non existant interfaces
- -I Init the state dir
- -u Run updates from our current DNS information
- -l [\$PATTERN] Show DNS information, optionally from interfaces
- that match the specified pattern
+ -h Show this help cruft
-i [\$PATTERN] Show interfaces that have supplied DNS information
optionally from interfaces that match the specified
pattern
+ -l [\$PATTERN] Show DNS information, optionally from interfaces
+ that match the specified pattern
+
+ -u Run updates from our current DNS information
+
+ Options:
+ -f Ignore non existant interfaces
+ -m metric Give the added DNS information a metric
+ -p Mark the interface as private
+ -x Mark the interface as exclusive
+
+ Subscriber and System Init Commands:
+ -I Init the state dir
+ -r \$SERVICE Restart the system service
+ (restarting a non-existent or non-running service
+ should have no output and return 0)
+ -R Show the system service restart command
-v [\$PATTERN] echo NEWDOMAIN, NEWSEARCH and NEWNS variables to
the console
- -h Show this help cruft
+ -V [\$PATTERN] Same as -v, but only uses configuration in
+ $SYSCONFDIR/resolvconf.conf
EOF
[ -z "$1" ] && exit 0
echo
error_exit "$*"
}
-echo_resolv()
-{
- local line= OIFS="$IFS"
-
- [ -n "$1" -a -f "$IFACEDIR/$1" ] || return 1
- echo "# resolv.conf from $1"
- # Our variable maker works of the fact each resolv.conf per interface
- # is separated by blank lines.
- # So we remove them when echoing them.
- while read -r line; do
- IFS="$OIFS"
- if [ -n "$line" ]; then
- # We need to set IFS here to preserve any whitespace
- IFS=''
- printf "%s\n" "$line"
- fi
- done < "$IFACEDIR/$1"
- echo
- IFS="$OIFS"
-}
-
# Strip any trailing dot from each name as a FQDN does not belong
# in resolv.conf(5)
# If you think otherwise, capture a DNS trace and you'll see libc
@@ -261,6 +254,108 @@ config_mkdirs()
return $e
}
+# With the advent of alternative init systems, it's possible to have
+# more than one installed. So we need to try and guess what one we're
+# using unless overriden by configure.
+# Note that restarting a service is a last resort - the subscribers
+# should make a reasonable attempt to reconfigre the service via some
+# method, normally SIGHUP.
+detect_init()
+{
+ [ -n "$RESTARTCMD" ] && return 0
+
+ # Detect the running init system.
+ # As systemd and OpenRC can be installed on top of legacy init
+ # systems we try to detect them first.
+ local status="@STATUSARG@"
+ : ${status:=status}
+ if [ -x /bin/systemctl -a -S /run/systemd/private ]; then
+ RESTARTCMD="if /bin/systemctl --quiet is-active; then
+ /bin/systemctl restart \$1.service;
+fi"
+ elif [ -x /usr/bin/systemctl -a -S /run/systemd/private ]; then
+ RESTARTCMD="if /usr/bin/systemctl --quiet is-active; then
+ /usr/bin/systemctl restart \$1.service;
+fi"
+ elif [ -x /sbin/rc-service -a \
+ -s /libexec/rc/init.d/softlevel -o -s /run/openrc/softlevel ]
+ then
+ RESTARTCMD="/sbin/rc-service -i \$1 -- -Ds restart"
+ elif [ -x /usr/sbin/invoke-rc.d ]; then
+ RCDIR=/etc/init.d
+ RESTARTCMD="if /usr/sbin/invoke-rc.d --quiet \$1 status 1>/dev/null 2>&1; then
+ /usr/sbin/invoke-rc.d \$1 restart;
+fi"
+ elif [ -x /sbin/service ]; then
+ # Old RedHat
+ RCDIR=/etc/init.d
+ RESTARTCMD="if /sbin/service \$1; then
+ /sbin/service \$1 restart;
+fi"
+ elif [ -x /usr/sbin/service ]; then
+ # Could be FreeBSD
+ RESTARTCMD="if /usr/sbin/service \$1 $status 1>/dev/null 2>&1; then
+ /usr/sbin/service \$1 restart;
+fi"
+ elif [ -x /bin/sv ]; then
+ RESTARTCMD="/bin/sv try-restart \$1"
+ elif [ -x /usr/bin/sv ]; then
+ RESTARTCMD="/usr/bin/sv try-restart \$1"
+ elif [ -e /etc/arch-release -a -d /etc/rc.d ]; then
+ RCDIR=/etc/rc.d
+ RESTARTCMD="if [ -e /var/run/daemons/\$1 ]; then
+ /etc/rc.d/\$1 restart;
+fi"
+ elif [ -e /etc/slackware-version -a -d /etc/rc.d ]; then
+ RESTARTCMD="if /etc/rc.d/rc.\$1 status 1>/dev/null 2>&1; then
+ /etc/rc.d/rc.\$1 restart;
+fi"
+ elif [ -e /etc/rc.d/rc.subr -a -d /etc/rc.d ]; then
+ # OpenBSD
+ RESTARTCMD="if /etc/rc.d/\$1 check 1>/dev/null 2>&1; then
+ /etc/rc.d/\$1 restart;
+fi"
+ else
+ for x in /etc/init.d/rc.d /etc/rc.d /etc/init.d; do
+ [ -d $x ] || continue
+ RESTARTCMD="if $x/\$1 $status 1>/dev/null 2>&1; then
+ $x/\$1 restart;
+fi"
+ break
+ done
+ fi
+
+ if [ -z "$RESTARTCMD" ]; then
+ if [ "$NOINIT_WARNED" != true ]; then
+ warn "could not detect a useable init system"
+ _NOINIT_WARNED=true
+ fi
+ return 1
+ fi
+ _NOINIT_WARNED=
+ return 0
+}
+
+echo_resolv()
+{
+ local line= OIFS="$IFS"
+
+ [ -n "$1" -a -f "$IFACEDIR/$1" ] || return 1
+ echo "# resolv.conf from $1"
+ # Our variable maker works of the fact each resolv.conf per interface
+ # is separated by blank lines.
+ # So we remove them when echoing them.
+ while read -r line; do
+ IFS="$OIFS"
+ if [ -n "$line" ]; then
+ # We need to set IFS here to preserve any whitespace
+ IFS=''
+ printf "%s\n" "$line"
+ fi
+ done < "$IFACEDIR/$1"
+ IFS="$OIFS"
+}
+
list_resolv()
{
[ -d "$IFACEDIR" ] || return 0
@@ -320,6 +415,7 @@ list_resolv()
cd "$IFACEDIR"
retval=1
+ excl=true
for i in $(uniqify $list); do
# Only list interfaces which we really have
if ! [ -f "$i" ]; then
@@ -334,6 +430,7 @@ list_resolv()
printf %s "$i "
else
echo_resolv "$i"
+ echo
fi
[ $? = 0 -a "$retval" = 1 ] && retval=0
done
@@ -499,7 +596,7 @@ make_vars()
force=false
VFLAG=
-while getopts a:Dd:fhIilm:puvVx OPT; do
+while getopts a:Dd:fhIilm:pRruvVx OPT; do
case "$OPT" in
f) force=true;;
h) usage;;
@@ -541,6 +638,18 @@ if [ "$cmd" = l -o "$cmd" = i ]; then
exit $?
fi
+# Restart a service or echo the command to restart a service
+if [ "$cmd" = r -o "$cmd" = R ]; then
+ detect_init || exit 1
+ if [ "$cmd" = r ]; then
+ set -- $args
+ eval $RESTARTCMD
+ else
+ echo "$RESTARTCMD"
+ fi
+ exit $?
+fi
+
# Not normally needed, but subscribers should be able to run independently
if [ "$cmd" = v -o -n "$VFLAG" ]; then
make_vars "$iface"
@@ -765,6 +874,10 @@ case "${resolvconf:-YES}" in
*) exit 0;;
esac
+# Try and detect a suitable init system for our scripts
+detect_init
+export RESTARTCMD RCDIR _NOINIT_WARNED
+
eval "$(make_vars)"
export RESOLVCONF DOMAINS SEARCH NAMESERVERS LOCALNAMESERVERS
: ${list_resolv:=list_resolv -l}
Modified: vendor/openresolv/dist/unbound.in
==============================================================================
--- vendor/openresolv/dist/unbound.in Sun Apr 17 21:30:40 2016 (r298166)
+++ vendor/openresolv/dist/unbound.in Sun Apr 17 21:55:09 2016 (r298167)
@@ -1,5 +1,5 @@
#!/bin/sh
-# Copyright (c) 2009-2014 Roy Marples
+# Copyright (c) 2009-2016 Roy Marples
# All rights reserved
# unbound subscriber for resolvconf
@@ -37,7 +37,6 @@ NL="
: ${unbound_pid:=/var/run/unbound.pid}
: ${unbound_service:=unbound}
-: ${unbound_restart:=@RESTARTCMD ${unbound_service}@}
newconf="# Generated by resolvconf$NL"
for d in $DOMAINS; do
@@ -71,6 +70,18 @@ else
@SBINDIR@/resolvconf -D "$unbound_conf"
fi
+restart_unbound()
+{
+ if [ -n "$unbound_restart" ]; then
+ eval $unbound_restart
+ elif [ -n "$RESTARTCMD" ]; then
+ set -- ${unbound_service}
+ eval $RESTARTCMD
+ else
+ @SBINDIR@/resolvconf -r ${unbound_service}
+ fi
+}
+
if [ ! -f "$unbound_conf" ] || \
[ "$(cat "$unbound_conf")" != "$(printf %s "$newconf")" ]
then
@@ -78,9 +89,9 @@ then
# If we can't sent a HUP then force a restart
if [ -s "$unbound_pid" ]; then
if ! kill -HUP $(cat "$unbound_pid") 2>/dev/null; then
- eval $unbound_restart
+ restart_unbound
fi
else
- eval $unbound_restart
+ restart_unbound
fi
fi
More information about the svn-src-all
mailing list