svn commit: r272956 - head/sys/dev/mse

John Baldwin jhb at FreeBSD.org
Sat Oct 11 19:37:01 UTC 2014


Author: jhb
Date: Sat Oct 11 19:36:59 2014
New Revision: 272956
URL: https://svnweb.freebsd.org/changeset/base/272956

Log:
  Add locking and mark MPSAFE.
  - Add a mutex to protect the softc.
  - Use callout(9) instead of timeout(9).
  - Consolidate duplicated detach routines into a bus-independent detach
    routine.
  - Add an extra sleep lock flag (MSESC_READING) to prevent other readers
    from reading while the first reader is copying data out of sc_bytes[]
    via uiomove().
  - Use bus_*() instead of bus_space_*().
  
  Tested by:	nyan

Modified:
  head/sys/dev/mse/mse.c
  head/sys/dev/mse/mse_cbus.c
  head/sys/dev/mse/mse_isa.c
  head/sys/dev/mse/msevar.h

Modified: head/sys/dev/mse/mse.c
==============================================================================
--- head/sys/dev/mse/mse.c	Sat Oct 11 19:34:41 2014	(r272955)
+++ head/sys/dev/mse/mse.c	Sat Oct 11 19:36:59 2014	(r272956)
@@ -99,7 +99,6 @@ static	d_poll_t	msepoll;
 
 static struct cdevsw mse_cdevsw = {
 	.d_version =	D_VERSION,
-	.d_flags =	D_NEEDGIANT,
 	.d_open =	mseopen,
 	.d_close =	mseclose,
 	.d_read =	mseread,
@@ -109,9 +108,10 @@ static struct cdevsw mse_cdevsw = {
 };
 
 static	void		mseintr(void *);
-static	timeout_t	msetimeout;
+static	void		mseintr_locked(mse_softc_t *sc);
+static	void		msetimeout(void *);
 
-#define	MSE_NBLOCKIO(dev)	dev2unit(dev)
+#define	MSE_NBLOCKIO(dev)	(dev2unit(dev) != 0)
 
 #define	MSEPRI	(PZERO + 3)
 
@@ -123,32 +123,68 @@ mse_common_attach(device_t dev)
 
 	sc = device_get_softc(dev);
 	unit = device_get_unit(dev);
+	mtx_init(&sc->sc_lock, "mse", NULL, MTX_DEF);
+	callout_init_mtx(&sc->sc_callout, &sc->sc_lock, 0);
 
 	rid = 0;
 	sc->sc_intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
 					     RF_ACTIVE);
 	if (sc->sc_intr == NULL) {
 		bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
+		mtx_destroy(&sc->sc_lock);
 		return ENXIO;
 	}
 
-	if (bus_setup_intr(dev, sc->sc_intr,
-	    INTR_TYPE_TTY, NULL, mseintr, sc, &sc->sc_ih)) {
+	if (bus_setup_intr(dev, sc->sc_intr, INTR_TYPE_TTY | INTR_MPSAFE,
+	    NULL, mseintr, sc, &sc->sc_ih)) {
 		bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
 		bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
+		mtx_destroy(&sc->sc_lock);
 		return ENXIO;
 	}
 	flags = device_get_flags(dev);
 	sc->mode.accelfactor = (flags & MSE_CONFIG_ACCEL) >> 4;
-	callout_handle_init(&sc->sc_callout);
 
-	sc->sc_dev = make_dev(&mse_cdevsw, 0, 0, 0, 0600, "mse%d", unit);
+	sc->sc_dev = make_dev(&mse_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600,
+	    "mse%d", unit);
 	sc->sc_dev->si_drv1 = sc;
-	sc->sc_ndev = make_dev(&mse_cdevsw, 1, 0, 0, 0600, "nmse%d", unit);
+	sc->sc_ndev = make_dev(&mse_cdevsw, 1, UID_ROOT, GID_WHEEL, 0600,
+	    "nmse%d", unit);
 	sc->sc_ndev->si_drv1 = sc;
 	return 0;
 }
 
+int
+mse_detach(device_t dev)
+{
+	mse_softc_t *sc;
+	int rid;
+
+	sc = device_get_softc(dev);
+	MSE_LOCK(sc);
+	if (sc->sc_flags & MSESC_OPEN) {
+		MSE_UNLOCK(sc);
+		return EBUSY;
+	}
+
+	/* Sabotage subsequent opens. */
+	sc->sc_mousetype = MSE_NONE;
+	MSE_UNLOCK(sc);
+
+	destroy_dev(sc->sc_dev);
+	destroy_dev(sc->sc_ndev);
+
+	rid = 0;
+	bus_teardown_intr(dev, sc->sc_intr, sc->sc_ih);
+	bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
+	bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
+
+	callout_drain(&sc->sc_callout);
+	mtx_destroy(&sc->sc_lock);
+
+	return 0;
+}
+
 /*
  * Exclusive open the mouse, initialize it and enable interrupts.
  */
@@ -156,18 +192,22 @@ static	int
 mseopen(struct cdev *dev, int flags, int fmt, struct thread *td)
 {
 	mse_softc_t *sc = dev->si_drv1;
-	int s;
 
-	if (sc->sc_mousetype == MSE_NONE)
+	MSE_LOCK(sc);
+	if (sc->sc_mousetype == MSE_NONE) {
+		MSE_UNLOCK(sc);
 		return (ENXIO);
-	if (sc->sc_flags & MSESC_OPEN)
+	}
+	if (sc->sc_flags & MSESC_OPEN) {
+		MSE_UNLOCK(sc);
 		return (EBUSY);
+	}
 	sc->sc_flags |= MSESC_OPEN;
 	sc->sc_obuttons = sc->sc_buttons = MOUSE_MSC_BUTTONS;
 	sc->sc_deltax = sc->sc_deltay = 0;
 	sc->sc_bytesread = sc->mode.packetsize = MOUSE_MSC_PACKETSIZE;
 	sc->sc_watchdog = FALSE;
-	sc->sc_callout = timeout(msetimeout, dev, hz*2);
+	callout_reset(&sc->sc_callout, hz * 2, msetimeout, dev);
 	sc->mode.level = 0;
 	sc->status.flags = 0;
 	sc->status.button = sc->status.obutton = 0;
@@ -176,9 +216,8 @@ mseopen(struct cdev *dev, int flags, int
 	/*
 	 * Initialize mouse interface and enable interrupts.
 	 */
-	s = spltty();
-	(*sc->sc_enablemouse)(sc->sc_iot, sc->sc_ioh);
-	splx(s);
+	(*sc->sc_enablemouse)(sc->sc_port);
+	MSE_UNLOCK(sc);
 	return (0);
 }
 
@@ -189,14 +228,12 @@ static	int
 mseclose(struct cdev *dev, int flags, int fmt, struct thread *td)
 {
 	mse_softc_t *sc = dev->si_drv1;
-	int s;
 
-	untimeout(msetimeout, dev, sc->sc_callout);
-	callout_handle_init(&sc->sc_callout);
-	s = spltty();
-	(*sc->sc_disablemouse)(sc->sc_iot, sc->sc_ioh);
+	MSE_LOCK(sc);
+	callout_stop(&sc->sc_callout);
+	(*sc->sc_disablemouse)(sc->sc_port);
 	sc->sc_flags &= ~MSESC_OPEN;
-	splx(s);
+	MSE_UNLOCK(sc);
 	return(0);
 }
 
@@ -209,27 +246,38 @@ static	int
 mseread(struct cdev *dev, struct uio *uio, int ioflag)
 {
 	mse_softc_t *sc = dev->si_drv1;
-	int xfer, s, error;
+	int xfer, error;
 
 	/*
 	 * If there are no protocol bytes to be read, set up a new protocol
 	 * packet.
 	 */
-	s = spltty(); /* XXX Should be its own spl, but where is imlXX() */
+	MSE_LOCK(sc);
+	while (sc->sc_flags & MSESC_READING) {
+		if (MSE_NBLOCKIO(dev)) {
+			MSE_UNLOCK(sc);
+			return (0);
+		}
+		sc->sc_flags |= MSESC_WANT;
+		error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH, "mseread",
+		    0);
+		if (error) {
+			MSE_UNLOCK(sc);
+			return (error);
+		}
+	}
+	sc->sc_flags |= MSESC_READING;
+	xfer = 0;
 	if (sc->sc_bytesread >= sc->mode.packetsize) {
 		while (sc->sc_deltax == 0 && sc->sc_deltay == 0 &&
 		       (sc->sc_obuttons ^ sc->sc_buttons) == 0) {
-			if (MSE_NBLOCKIO(dev)) {
-				splx(s);
-				return (0);
-			}
+			if (MSE_NBLOCKIO(dev))
+				goto out;
 			sc->sc_flags |= MSESC_WANT;
-			error = tsleep(sc, MSEPRI | PCATCH,
+			error = mtx_sleep(sc, &sc->sc_lock, MSEPRI | PCATCH,
 				"mseread", 0);
-			if (error) {
-				splx(s);
-				return (error);
-			}
+			if (error)
+				goto out;
 		}
 
 		/*
@@ -257,13 +305,21 @@ mseread(struct cdev *dev, struct uio *ui
 		sc->sc_deltax = sc->sc_deltay = 0;
 		sc->sc_bytesread = 0;
 	}
-	splx(s);
 	xfer = min(uio->uio_resid, sc->mode.packetsize - sc->sc_bytesread);
+	MSE_UNLOCK(sc);
 	error = uiomove(&sc->sc_bytes[sc->sc_bytesread], xfer, uio);
-	if (error)
-		return (error);
-	sc->sc_bytesread += xfer;
-	return(0);
+	MSE_LOCK(sc);
+out:
+	sc->sc_flags &= ~MSESC_READING;
+	if (error == 0)
+		sc->sc_bytesread += xfer;
+	if (sc->sc_flags & MSESC_WANT) {
+		sc->sc_flags &= ~MSESC_WANT;
+		MSE_UNLOCK(sc);
+		wakeup(sc);
+	} else
+		MSE_UNLOCK(sc);
+	return (error);
 }
 
 /*
@@ -275,20 +331,19 @@ mseioctl(struct cdev *dev, u_long cmd, c
 	mse_softc_t *sc = dev->si_drv1;
 	mousestatus_t status;
 	int err = 0;
-	int s;
 
 	switch (cmd) {
 
 	case MOUSE_GETHWINFO:
-		s = spltty();
+		MSE_LOCK(sc);
 		*(mousehw_t *)addr = sc->hw;
 		if (sc->mode.level == 0)
 			((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
-		splx(s);
+		MSE_UNLOCK(sc);
 		break;
 
 	case MOUSE_GETMODE:
-		s = spltty();
+		MSE_LOCK(sc);
 		*(mousemode_t *)addr = sc->mode;
 		switch (sc->mode.level) {
 		case 0:
@@ -299,7 +354,7 @@ mseioctl(struct cdev *dev, u_long cmd, c
 	    		((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
 			break;
 		}
-		splx(s);
+		MSE_UNLOCK(sc);
 		break;
 
 	case MOUSE_SETMODE:
@@ -310,9 +365,11 @@ mseioctl(struct cdev *dev, u_long cmd, c
 		default:
 			return (EINVAL);
 		}
-		if (((mousemode_t *)addr)->accelfactor < -1)
+		MSE_LOCK(sc);
+		if (((mousemode_t *)addr)->accelfactor < -1) {
+			MSE_UNLOCK(sc);
 			return (EINVAL);
-		else if (((mousemode_t *)addr)->accelfactor >= 0)
+		} else if (((mousemode_t *)addr)->accelfactor >= 0)
 			sc->mode.accelfactor = 
 			    ((mousemode_t *)addr)->accelfactor;
 		sc->mode.level = ((mousemode_t *)addr)->level;
@@ -326,23 +383,30 @@ mseioctl(struct cdev *dev, u_long cmd, c
 			    = MOUSE_SYS_PACKETSIZE;
 			break;
 		}
+		MSE_UNLOCK(sc);
 		break;
 
 	case MOUSE_GETLEVEL:
+		MSE_LOCK(sc);
 		*(int *)addr = sc->mode.level;
+		MSE_UNLOCK(sc);
 		break;
 
 	case MOUSE_SETLEVEL:
 		switch (*(int *)addr) {
 		case 0:
+			MSE_LOCK(sc);
 			sc->mode.level = *(int *)addr;
 			sc->sc_bytesread = sc->mode.packetsize 
 			    = MOUSE_MSC_PACKETSIZE;
+			MSE_UNLOCK(sc);
 			break;
 		case 1:
+			MSE_LOCK(sc);
 			sc->mode.level = *(int *)addr;
 			sc->sc_bytesread = sc->mode.packetsize 
 			    = MOUSE_SYS_PACKETSIZE;
+			MSE_UNLOCK(sc);
 			break;
 		default:
 			return (EINVAL);
@@ -350,7 +414,7 @@ mseioctl(struct cdev *dev, u_long cmd, c
 		break;
 
 	case MOUSE_GETSTATUS:
-		s = spltty();
+		MSE_LOCK(sc);
 		status = sc->status;
 		sc->status.flags = 0;
 		sc->status.obutton = sc->status.button;
@@ -358,7 +422,7 @@ mseioctl(struct cdev *dev, u_long cmd, c
 		sc->status.dx = 0;
 		sc->status.dy = 0;
 		sc->status.dz = 0;
-		splx(s);
+		MSE_UNLOCK(sc);
 		*(mousestatus_t *)addr = status;
 		break;
 
@@ -385,24 +449,18 @@ static	int
 msepoll(struct cdev *dev, int events, struct thread *td)
 {
 	mse_softc_t *sc = dev->si_drv1;
-	int s;
 	int revents = 0;
 
-	s = spltty();
+	MSE_LOCK(sc);
 	if (events & (POLLIN | POLLRDNORM)) {
 		if (sc->sc_bytesread != sc->mode.packetsize ||
 		    sc->sc_deltax != 0 || sc->sc_deltay != 0 ||
 		    (sc->sc_obuttons ^ sc->sc_buttons) != 0)
 			revents |= events & (POLLIN | POLLRDNORM);
-		else {
-			/*
-			 * Since this is an exclusive open device, any previous
-			 * proc pointer is trash now, so we can just assign it.
-			 */
+		else
 			selrecord(td, &sc->sc_selp);
-		}
 	}
-	splx(s);
+	MSE_UNLOCK(sc);
 	return (revents);
 }
 
@@ -417,13 +475,14 @@ msetimeout(void *arg)
 
 	dev = (struct cdev *)arg;
 	sc = dev->si_drv1;
+	MSE_ASSERT_LOCKED(sc);
 	if (sc->sc_watchdog) {
 		if (bootverbose)
 			printf("%s: lost interrupt?\n", devtoname(dev));
-		mseintr(sc);
+		mseintr_locked(sc);
 	}
 	sc->sc_watchdog = TRUE;
-	sc->sc_callout = timeout(msetimeout, dev, hz);
+	callout_schedule(&sc->sc_callout, hz);
 }
 
 /*
@@ -432,6 +491,16 @@ msetimeout(void *arg)
 static void
 mseintr(void *arg)
 {
+	mse_softc_t *sc = arg;
+
+	MSE_LOCK(sc);
+	mseintr_locked(sc);
+	MSE_UNLOCK(sc);
+}
+
+static void
+mseintr_locked(mse_softc_t *sc)
+{
 	/*
 	 * the table to turn MouseSystem button bits (MOUSE_MSC_BUTTON?UP)
 	 * into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
@@ -446,7 +515,6 @@ mseintr(void *arg)
 		MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
         	MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
 	};
-	mse_softc_t *sc = arg;
 	int dx, dy, but;
 	int sign;
 
@@ -458,7 +526,7 @@ mseintr(void *arg)
 	if ((sc->sc_flags & MSESC_OPEN) == 0)
 		return;
 
-	(*sc->sc_getmouse)(sc->sc_iot, sc->sc_ioh, &dx, &dy, &but);
+	(*sc->sc_getmouse)(sc->sc_port, &dx, &dy, &but);
 	if (sc->mode.accelfactor > 0) {
 		sign = (dx < 0);
 		dx = dx * dx / sc->mode.accelfactor;

Modified: head/sys/dev/mse/mse_cbus.c
==============================================================================
--- head/sys/dev/mse/mse_cbus.c	Sat Oct 11 19:34:41 2014	(r272955)
+++ head/sys/dev/mse/mse_cbus.c	Sat Oct 11 19:36:59 2014	(r272956)
@@ -91,12 +91,11 @@
 
 static	int		mse_cbus_probe(device_t dev);
 static	int		mse_cbus_attach(device_t dev);
-static	int		mse_cbus_detach(device_t dev);
 
 static	device_method_t	mse_methods[] = {
 	DEVMETHOD(device_probe,		mse_cbus_probe),
 	DEVMETHOD(device_attach,	mse_cbus_attach),
-	DEVMETHOD(device_detach,	mse_cbus_detach),
+	DEVMETHOD(device_detach,	mse_detach),
 	{ 0, 0 }
 };
 
@@ -136,10 +135,10 @@ static struct isa_pnp_id mse_ids[] = {
 static	bus_addr_t	mse_port[] = {0, 2, 4, 6};
 
 static	int		mse_probe98m(device_t dev, mse_softc_t *sc);
-static	void		mse_disable98m(bus_space_tag_t t, bus_space_handle_t h);
-static	void		mse_get98m(bus_space_tag_t t, bus_space_handle_t h,
+static	void		mse_disable98m(struct resource *port);
+static	void		mse_get98m(struct resource *port,
 			    int *dx, int *dy, int *but);
-static	void		mse_enable98m(bus_space_tag_t t, bus_space_handle_t h);
+static	void		mse_enable98m(struct resource *port);
 
 static struct mse_types mse_types[] = {
 	{ MSE_98BUSMOUSE,
@@ -173,8 +172,6 @@ mse_cbus_probe(device_t dev)
 		bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
 		return ENXIO;
 	}
-	sc->sc_iot = rman_get_bustag(sc->sc_port);
-	sc->sc_ioh = rman_get_bushandle(sc->sc_port);
 
 	/*
 	 * Check for each mouse type in the table.
@@ -216,33 +213,10 @@ mse_cbus_attach(device_t dev)
 		bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
 		return ENXIO;
 	}
-	sc->sc_iot = rman_get_bustag(sc->sc_port);
-	sc->sc_ioh = rman_get_bushandle(sc->sc_port);
 
 	return (mse_common_attach(dev));
 }
 
-static int
-mse_cbus_detach(device_t dev)
-{
-	mse_softc_t *sc;
-	int rid;
-
-	sc = device_get_softc(dev);
-	if (sc->sc_flags & MSESC_OPEN)
-		return EBUSY;
-
-	rid = 0;
-	BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->sc_intr, sc->sc_ih);
-	bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
-	bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
-
-	destroy_dev(sc->sc_dev);
-	destroy_dev(sc->sc_ndev);
-
-	return 0;
-}
-
 /*
  * Routines for the PC98 bus mouse.
  */
@@ -255,15 +229,15 @@ static int
 mse_probe98m(device_t dev, mse_softc_t *sc)
 {
 	/* mode set */
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, MODE, 0x93);
+	bus_write_1(sc->sc_port, MODE, 0x93);
 
 	/* initialize */
 	/* INT disable */
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, INT, INT_DISABLE);
+	bus_write_1(sc->sc_port, INT, INT_DISABLE);
 	/* HC = 0 */
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, HC, HC_NO_CLEAR);
+	bus_write_1(sc->sc_port, HC, HC_NO_CLEAR);
 	/* HC = 1 */
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, HC, HC_CLEAR);
+	bus_write_1(sc->sc_port, HC, HC_CLEAR);
 
 	return (1);
 }
@@ -272,57 +246,56 @@ mse_probe98m(device_t dev, mse_softc_t *
  * Initialize PC98 bus mouse and enable interrupts.
  */
 static void
-mse_enable98m(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_enable98m(struct resource *port)
 {
-	bus_space_write_1(tag, handle, INT, INT_ENABLE);    /* INT enable */
-	bus_space_write_1(tag, handle, HC, HC_NO_CLEAR);    /* HC = 0 */
-	bus_space_write_1(tag, handle, HC, HC_CLEAR);       /* HC = 1 */
+	bus_write_1(port, INT, INT_ENABLE);    /* INT enable */
+	bus_write_1(port, HC, HC_NO_CLEAR);    /* HC = 0 */
+	bus_write_1(port, HC, HC_CLEAR);       /* HC = 1 */
 }
  
 /*
  * Disable interrupts for PC98 Bus mouse.
  */
 static void
-mse_disable98m(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_disable98m(struct resource *port)
 {
-	bus_space_write_1(tag, handle, INT, INT_DISABLE);   /* INT disable */
-	bus_space_write_1(tag, handle, HC, HC_NO_CLEAR);    /* HC = 0 */
-	bus_space_write_1(tag, handle, HC, HC_CLEAR);       /* HC = 1 */
+	bus_write_1(port, INT, INT_DISABLE);   /* INT disable */
+	bus_write_1(port, HC, HC_NO_CLEAR);    /* HC = 0 */
+	bus_write_1(port, HC, HC_CLEAR);       /* HC = 1 */
 }
 
 /*
  * Get current dx, dy and up/down button state.
  */
 static void
-mse_get98m(bus_space_tag_t tag, bus_space_handle_t handle, int *dx, int *dy,
-    int *but)
+mse_get98m(struct resource *port, int *dx, int *dy, int *but)
 {
 	register char x, y;
 
-	bus_space_write_1(tag, handle, INT, INT_DISABLE);   /* INT disable */
+	bus_write_1(port, INT, INT_DISABLE);   /* INT disable */
 
-	bus_space_write_1(tag, handle, HC, HC_CLEAR);       /* HC = 1 */
+	bus_write_1(port, HC, HC_CLEAR);       /* HC = 1 */
 
 	/* X low */
-	bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | XL);
-	x = bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f;
+	bus_write_1(port, MSE_PORTC, 0x90 | XL);
+	x = bus_read_1(port, MSE_PORTA) & 0x0f;
 	/* X high */
-	bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | XH);
-	x |= ((bus_space_read_1(tag, handle, MSE_PORTA)  & 0x0f) << 4);
+	bus_write_1(port, MSE_PORTC, 0x90 | XH);
+	x |= ((bus_read_1(port, MSE_PORTA)  & 0x0f) << 4);
 
 	/* Y low */
-	bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | YL);
-	y = (bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f);
+	bus_write_1(port, MSE_PORTC, 0x90 | YL);
+	y = (bus_read_1(port, MSE_PORTA) & 0x0f);
 	/* Y high */
-	bus_space_write_1(tag, handle, MSE_PORTC, 0x90 | YH);
-	y |= ((bus_space_read_1(tag, handle, MSE_PORTA) & 0x0f) << 4);
+	bus_write_1(port, MSE_PORTC, 0x90 | YH);
+	y |= ((bus_read_1(port, MSE_PORTA) & 0x0f) << 4);
 
-	*but = (bus_space_read_1(tag, handle, MSE_PORTA) >> 5) & 7;
+	*but = (bus_read_1(port, MSE_PORTA) >> 5) & 7;
 
 	*dx = x;
 	*dy = y;
 
-	bus_space_write_1(tag, handle, HC, HC_NO_CLEAR);    /* HC = 0 */
+	bus_write_1(port, HC, HC_NO_CLEAR);    /* HC = 0 */
 
-	bus_space_write_1(tag, handle, INT, INT_ENABLE);    /* INT enable */
+	bus_write_1(port, INT, INT_ENABLE);    /* INT enable */
 }

Modified: head/sys/dev/mse/mse_isa.c
==============================================================================
--- head/sys/dev/mse/mse_isa.c	Sat Oct 11 19:34:41 2014	(r272955)
+++ head/sys/dev/mse/mse_isa.c	Sat Oct 11 19:36:59 2014	(r272956)
@@ -91,12 +91,11 @@
 
 static	int		mse_isa_probe(device_t dev);
 static	int		mse_isa_attach(device_t dev);
-static	int		mse_isa_detach(device_t dev);
 
 static	device_method_t	mse_methods[] = {
 	DEVMETHOD(device_probe,		mse_isa_probe),
 	DEVMETHOD(device_attach,	mse_isa_attach),
-	DEVMETHOD(device_detach,	mse_isa_detach),
+	DEVMETHOD(device_detach,	mse_detach),
 	{ 0, 0 }
 };
 
@@ -156,12 +155,10 @@ static struct isa_pnp_id mse_ids[] = {
 #define MSE_INTREN	0x00
 
 static	int		mse_probelogi(device_t dev, mse_softc_t *sc);
-static	void		mse_disablelogi(bus_space_tag_t t,
-			    bus_space_handle_t h);
-static	void		mse_getlogi(bus_space_tag_t t, bus_space_handle_t h,
-			    int *dx, int *dy, int *but);
-static	void		mse_enablelogi(bus_space_tag_t t,
-			    bus_space_handle_t h);
+static	void		mse_disablelogi(struct resource *port);
+static	void		mse_getlogi(struct resource *port, int *dx, int *dy,
+			    int *but);
+static	void		mse_enablelogi(struct resource *port);
 
 /*
  * ATI Inport mouse definitions
@@ -175,10 +172,10 @@ static	void		mse_enablelogi(bus_space_ta
 #define	MSE_INPORT_INTREN	0x09
 
 static	int		mse_probeati(device_t dev, mse_softc_t *sc);
-static	void		mse_enableati(bus_space_tag_t t, bus_space_handle_t h);
-static	void		mse_disableati(bus_space_tag_t t, bus_space_handle_t h);
-static	void		mse_getati(bus_space_tag_t t, bus_space_handle_t h,
-			    int *dx, int *dy, int *but);
+static	void		mse_enableati(struct resource *port);
+static	void		mse_disableati(struct resource *port);
+static	void		mse_getati(struct resource *port, int *dx, int *dy,
+			    int *but);
 
 static struct mse_types mse_types[] = {
 	{ MSE_ATIINPORT, 
@@ -213,8 +210,6 @@ mse_isa_probe(device_t dev)
 					 MSE_IOSIZE, RF_ACTIVE);
 	if (sc->sc_port == NULL)
 		return ENXIO;
-	sc->sc_iot = rman_get_bustag(sc->sc_port);
-	sc->sc_ioh = rman_get_bushandle(sc->sc_port);
 
 	/*
 	 * Check for each mouse type in the table.
@@ -252,33 +247,10 @@ mse_isa_attach(device_t dev)
 					 MSE_IOSIZE, RF_ACTIVE);
 	if (sc->sc_port == NULL)
 		return ENXIO;
-	sc->sc_iot = rman_get_bustag(sc->sc_port);
-	sc->sc_ioh = rman_get_bushandle(sc->sc_port);
 
 	return (mse_common_attach(dev));
 }
 
-static	int
-mse_isa_detach(device_t dev)
-{
-	mse_softc_t *sc;
-	int rid;
-
-	sc = device_get_softc(dev);
-	if (sc->sc_flags & MSESC_OPEN)
-		return EBUSY;
-
-	rid = 0;
-	BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->sc_intr, sc->sc_ih);
-	bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
-	bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
-
-	destroy_dev(sc->sc_dev);
-	destroy_dev(sc->sc_ndev);
-
-	return 0;
-}
-
 /*
  * Routines for the Logitech mouse.
  */
@@ -293,15 +265,14 @@ mse_probelogi(device_t dev, mse_softc_t 
 
 	int sig;
 
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTD, MSE_SETUP);
+	bus_write_1(sc->sc_port, MSE_PORTD, MSE_SETUP);
 		/* set the signature port */
-	bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTB, MSE_LOGI_SIG);
+	bus_write_1(sc->sc_port, MSE_PORTB, MSE_LOGI_SIG);
 
 	DELAY(30000); /* 30 ms delay */
-	sig = bus_space_read_1(sc->sc_iot, sc->sc_ioh, MSE_PORTB) & 0xFF;
+	sig = bus_read_1(sc->sc_port, MSE_PORTB) & 0xFF;
 	if (sig == MSE_LOGI_SIG) {
-		bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTC,
-				  MSE_DISINTR);
+		bus_write_1(sc->sc_port, MSE_PORTC, MSE_DISINTR);
 		return(1);
 	} else {
 		if (bootverbose)
@@ -314,46 +285,45 @@ mse_probelogi(device_t dev, mse_softc_t 
  * Initialize Logitech mouse and enable interrupts.
  */
 static void
-mse_enablelogi(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_enablelogi(struct resource *port)
 {
 	int dx, dy, but;
 
-	bus_space_write_1(tag, handle, MSE_PORTD, MSE_SETUP);
-	mse_getlogi(tag, handle, &dx, &dy, &but);
+	bus_write_1(port, MSE_PORTD, MSE_SETUP);
+	mse_getlogi(port, &dx, &dy, &but);
 }
 
 /*
  * Disable interrupts for Logitech mouse.
  */
 static void
-mse_disablelogi(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_disablelogi(struct resource *port)
 {
 
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_DISINTR);
+	bus_write_1(port, MSE_PORTC, MSE_DISINTR);
 }
 
 /*
  * Get the current dx, dy and button up/down state.
  */
 static void
-mse_getlogi(bus_space_tag_t tag, bus_space_handle_t handle, int *dx, int *dy,
-    int *but)
+mse_getlogi(struct resource *port, int *dx, int *dy, int *but)
 {
 	register char x, y;
 
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RXLOW);
-	x = bus_space_read_1(tag, handle, MSE_PORTA);
+	bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RXLOW);
+	x = bus_read_1(port, MSE_PORTA);
 	*but = (x >> 5) & MOUSE_MSC_BUTTONS;
 	x &= 0xf;
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RXHIGH);
-	x |= (bus_space_read_1(tag, handle, MSE_PORTA) << 4);
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RYLOW);
-	y = (bus_space_read_1(tag, handle, MSE_PORTA) & 0xf);
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RYHIGH);
-	y |= (bus_space_read_1(tag, handle, MSE_PORTA) << 4);
+	bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RXHIGH);
+	x |= (bus_read_1(port, MSE_PORTA) << 4);
+	bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RYLOW);
+	y = (bus_read_1(port, MSE_PORTA) & 0xf);
+	bus_write_1(port, MSE_PORTC, MSE_HOLD | MSE_RYHIGH);
+	y |= (bus_read_1(port, MSE_PORTA) << 4);
 	*dx = x;
 	*dy = y;
-	bus_space_write_1(tag, handle, MSE_PORTC, MSE_INTREN);
+	bus_write_1(port, MSE_PORTC, MSE_INTREN);
 }
 
 /*
@@ -369,7 +339,7 @@ mse_probeati(device_t dev, mse_softc_t *
 	int i;
 
 	for (i = 0; i < 2; i++)
-		if (bus_space_read_1(sc->sc_iot, sc->sc_ioh, MSE_PORTC) == 0xde)
+		if (bus_read_1(sc->sc_port, MSE_PORTC) == 0xde)
 			return (1);
 	return (0);
 }
@@ -378,44 +348,43 @@ mse_probeati(device_t dev, mse_softc_t *
  * Initialize ATI Inport mouse and enable interrupts.
  */
 static void
-mse_enableati(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_enableati(struct resource *port)
 {
 
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_RESET);
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
-	bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_INTREN);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_RESET);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE);
+	bus_write_1(port, MSE_PORTB, MSE_INPORT_INTREN);
 }
 
 /*
  * Disable interrupts for ATI Inport mouse.
  */
 static void
-mse_disableati(bus_space_tag_t tag, bus_space_handle_t handle)
+mse_disableati(struct resource *port)
 {
 
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
-	bus_space_write_1(tag, handle, MSE_PORTB, 0);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE);
+	bus_write_1(port, MSE_PORTB, 0);
 }
 
 /*
  * Get current dx, dy and up/down button state.
  */
 static void
-mse_getati(bus_space_tag_t tag, bus_space_handle_t handle, int *dx, int *dy,
-    int *but)
+mse_getati(struct resource *port, int *dx, int *dy, int *but)
 {
 	char byte;
 
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
-	bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_HOLD);
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_STATUS);
-	*but = ~bus_space_read_1(tag, handle, MSE_PORTB) & MOUSE_MSC_BUTTONS;
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_DX);
-	byte = bus_space_read_1(tag, handle, MSE_PORTB);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE);
+	bus_write_1(port, MSE_PORTB, MSE_INPORT_HOLD);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_STATUS);
+	*but = ~bus_read_1(port, MSE_PORTB) & MOUSE_MSC_BUTTONS;
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_DX);
+	byte = bus_read_1(port, MSE_PORTB);
 	*dx = byte;
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_DY);
-	byte = bus_space_read_1(tag, handle, MSE_PORTB);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_DY);
+	byte = bus_read_1(port, MSE_PORTB);
 	*dy = byte;
-	bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
-	bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_INTREN);
+	bus_write_1(port, MSE_PORTA, MSE_INPORT_MODE);
+	bus_write_1(port, MSE_PORTB, MSE_INPORT_INTREN);
 }

Modified: head/sys/dev/mse/msevar.h
==============================================================================
--- head/sys/dev/mse/msevar.h	Sat Oct 11 19:34:41 2014	(r272955)
+++ head/sys/dev/mse/msevar.h	Sat Oct 11 19:36:59 2014	(r272956)
@@ -46,7 +46,7 @@
 
 /*
  * Software control structure for mouse. The sc_enablemouse(),
- * sc_disablemouse() and sc_getmouse() routines must be called spl'd().
+ * sc_disablemouse() and sc_getmouse() routines must be called locked.
  */
 typedef struct mse_softc {
 	int		sc_flags;
@@ -54,22 +54,19 @@ typedef struct mse_softc {
 	struct selinfo	sc_selp;
 	struct resource	*sc_port;
 	struct resource	*sc_intr;
-	bus_space_tag_t	sc_iot;
-	bus_space_handle_t sc_ioh;
 	void		*sc_ih;
-	void		(*sc_enablemouse)(bus_space_tag_t t,
-			    bus_space_handle_t h);
-	void		(*sc_disablemouse)(bus_space_tag_t t,
-			    bus_space_handle_t h);
-	void		(*sc_getmouse)(bus_space_tag_t t, bus_space_handle_t h,
-			    int *dx, int *dy, int *but);
+	void		(*sc_enablemouse)(struct resource *port);
+	void		(*sc_disablemouse)(struct resource *port);
+	void		(*sc_getmouse)(struct resource *port, int *dx, int *dy,
+			    int *but);
 	int		sc_deltax;
 	int		sc_deltay;
 	int		sc_obuttons;
 	int		sc_buttons;
 	int		sc_bytesread;
 	u_char		sc_bytes[MOUSE_SYS_PACKETSIZE];
-	struct		callout_handle sc_callout;
+	struct callout	sc_callout;
+	struct mtx	sc_lock;
 	int		sc_watchdog;
 	struct cdev *sc_dev;
 	struct cdev *sc_ndev;
@@ -78,9 +75,14 @@ typedef struct mse_softc {
 	mousestatus_t	status;
 } mse_softc_t;
 
+#define	MSE_LOCK(sc)		mtx_lock(&(sc)->sc_lock)
+#define	MSE_UNLOCK(sc)		mtx_unlock(&(sc)->sc_lock)
+#define	MSE_ASSERT_LOCKED(sc)	mtx_assert(&(sc)->sc_lock, MA_OWNED)
+
 /* Flags */
 #define	MSESC_OPEN	0x1
 #define	MSESC_WANT	0x2
+#define	MSESC_READING	0x4
 
 /* and Mouse Types */
 #define	MSE_NONE	0	/* don't move this! */
@@ -110,12 +112,11 @@ struct mse_types {
 	int	m_type;		/* Type of bus mouse */
 	int	(*m_probe)(device_t dev, mse_softc_t *sc);
 				/* Probe routine to test for it */
-	void	(*m_enable)(bus_space_tag_t t, bus_space_handle_t h);
+	void	(*m_enable)(struct resource *port);
 				/* Start routine */
-	void	(*m_disable)(bus_space_tag_t t, bus_space_handle_t h);
+	void	(*m_disable)(struct resource *port);
 				/* Disable interrupts routine */
-	void	(*m_get)(bus_space_tag_t t, bus_space_handle_t h, int *dx,
-		    int *dy, int *but);
+	void	(*m_get)(struct resource *port, int *dx, int *dy, int *but);
 				/* and get mouse status */
 	mousehw_t   m_hw;	/* buttons iftype type model hwid */
 	mousemode_t m_mode;	/* proto rate res accel level size mask */
@@ -123,3 +124,4 @@ struct mse_types {
 
 extern devclass_t	mse_devclass;
 int mse_common_attach(device_t);
+int mse_detach(device_t);


More information about the svn-src-all mailing list