svn commit: r265608 - stable/9/share/man/man4

Navdeep Parhar np at FreeBSD.org
Wed May 7 20:40:24 UTC 2014 

Author: np
Date: Wed May  7 20:40:23 2014
New Revision: 265608
URL: http://svnweb.freebsd.org/changeset/base/265608

Log:
  MFC r259569, r259770 (by joel@), and r263451.
  
  r259569:
  cxgbe.4: Belated update to the man page to reflect T5 support.
  
  r259770:
  mdoc: nuke whitespace.
  
  r263451:
  cxgbe(4): man page updates.

Modified:
  stable/9/share/man/man4/cxgbe.4
Directory Properties:
  stable/9/share/man/man4/   (props changed)

Modified: stable/9/share/man/man4/cxgbe.4
==============================================================================
--- stable/9/share/man/man4/cxgbe.4	Wed May  7 20:31:44 2014	(r265607)
+++ stable/9/share/man/man4/cxgbe.4	Wed May  7 20:40:23 2014	(r265608)
@@ -1,4 +1,4 @@
-.\" Copyright (c) 2011-2012, Chelsio Inc
+.\" Copyright (c) 2011-2014, Chelsio Inc
 .\" All rights reserved.
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -31,12 +31,12 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd February 25, 2012
+.Dd March 20, 2014
 .Dt CXGBE 4
 .Os
 .Sh NAME
 .Nm cxgbe
-.Nd "Chelsio T4 10Gb and 1Gb Ethernet adapter driver"
+.Nd "Chelsio T4 and T5 based 40Gb, 10Gb, and 1Gb Ethernet adapter driver"
 .Sh SYNOPSIS
 To compile this driver into the kernel,
 place the following lines in your
@@ -50,13 +50,14 @@ module at boot time, place the following
 .Xr loader.conf 5 :
 .Bd -literal -offset indent
 t4fw_cfg_load="YES"
+t5fw_cfg_load="YES"
 if_cxgbe_load="YES"
 .Ed
 .Sh DESCRIPTION
 The
 .Nm
 driver provides support for PCI Express Ethernet adapters based on
-the Chelsio Terminator 4 (T4) ASIC.
+the Chelsio Terminator 4 and Terminator 5 ASICs (T4 and T5).
 The driver supports Jumbo Frames, Transmit/Receive checksum offload,
 TCP segmentation offload (TSO), Large Receive Offload (LRO), VLAN
 tag insertion/extraction, VLAN checksum offload, VLAN TSO, and
@@ -65,11 +66,49 @@ For further hardware information and que
 requirements, see
 .Pa http://www.chelsio.com/ .
 .Pp
+Note that ports of T5 cards are named cxl and attach to a t5nex parent device
+(in contrast to ports named cxgbe that attach to a t4nex parent for a T4 card).
+Loader tunables with the hw.cxgbe prefix apply to both T4 and T5 cards.
+The sysctl MIBs are at dev.t5nex and dev.cxl for T5 cards and at dev.t4nex and
+dev.cxgbe for T4 cards.
+.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE
 The
 .Nm
+driver supports 40Gb, 10Gb and 1Gb Ethernet adapters based on the T5 ASIC
+(ports will be named cxl):
+.Pp
+.Bl -bullet -compact
+.It
+Chelsio T580-CR
+.It
+Chelsio T580-LP-CR
+.It
+Chelsio T580-LP-SO-CR
+.It
+Chelsio T560-CR
+.It
+Chelsio T540-CR
+.It
+Chelsio T540-LP-CR
+.It
+Chelsio T522-CR
+.It
+Chelsio T520-LL-CR
+.It
+Chelsio T520-CR
+.It
+Chelsio T520-SO
+.It
+Chelsio T520-BT
+.It
+Chelsio T504-BT
+.El
+.Pp
+The
+.Nm
 driver supports 10Gb and 1Gb Ethernet adapters based on the T4 ASIC:
 .Pp
 .Bl -bullet -compact
@@ -101,11 +140,11 @@ prompt before booting the kernel or stor
 .Xr loader.conf 5 .
 .Bl -tag -width indent
 .It Va hw.cxgbe.ntxq10g
-The number of tx queues to use for a 10Gb port.
+The number of tx queues to use for a 10Gb or 40Gb port.
 The default is 16 or the number
 of CPU cores in the system, whichever is less.
 .It Va hw.cxgbe.nrxq10g
-The number of rx queues to use for a 10Gb port.
+The number of rx queues to use for a 10Gb or 40Gb port.
 The default is 8 or the number
 of CPU cores in the system, whichever is less.
 .It Va hw.cxgbe.ntxq1g
@@ -117,11 +156,11 @@ The number of rx queues to use for a 1Gb
 The default is 2 or the number
 of CPU cores in the system, whichever is less.
 .It Va hw.cxgbe.nofldtxq10g
-The number of TOE tx queues to use for a 10Gb port.
+The number of TOE tx queues to use for a 10Gb or 40Gb port.
 The default is 8 or the
 number of CPU cores in the system, whichever is less.
 .It Va hw.cxgbe.nofldrxq10g
-The number of TOE rx queues to use for a 10Gb port.
+The number of TOE rx queues to use for a 10Gb or 40Gb port.
 The default is 2 or the
 number of CPU cores in the system, whichever is less.
 .It Va hw.cxgbe.nofldtxq1g
@@ -137,20 +176,18 @@ The timer index value to use to delay in
 The holdoff timer list has the values 1, 5, 10, 50, 100, and 200
 by default (all values are in microseconds) and the index selects a
 value from this list.
-The default value is 1 for both 10Gb and 1Gb ports, which means the
-timer value is 5us.
-Different cxgbe interfaces can be assigned different values at any time via the
-dev.cxgbe.X.holdoff_tmr_idx sysctl.
+The default value is 1 which means the timer value is 5us.
+Different interfaces can be assigned different values at any time via the
+dev.cxgbe.X.holdoff_tmr_idx or dev.cxl.X.holdoff_tmr_idx sysctl.
 .It Va hw.cxgbe.holdoff_pktc_idx_10G
 .It Va hw.cxgbe.holdoff_pktc_idx_1G
 The packet-count index value to use to delay interrupts.
 The packet-count list has the values 1, 8, 16, and 32 by default
 and the index selects a value from this list.
-The default value is -1 for both 10Gb and 1Gb ports, which means packet
-counting is disabled and interrupts are generated based solely on the
-holdoff timer value.
-Different cxgbe interfaces can be assigned different values via the
-dev.cxgbe.X.holdoff_pktc_idx sysctl.
+The default value is -1 which means packet counting is disabled and interrupts
+are generated based solely on the holdoff timer value.
+Different interfaces can be assigned different values via the
+dev.cxgbe.X.holdoff_pktc_idx or dev.cxl.X.holdoff_pktc_idx sysctl.
 This sysctl works only when the interface has never been marked up (as done by
 ifconfig up).
 .It Va hw.cxgbe.qsize_txq
@@ -161,16 +198,16 @@ software queuing.
 See
 .Xr ifnet 9 .
 The default value is 1024.
-Different cxgbe interfaces can be assigned different values via the
-dev.cxgbe.X.qsize_txq sysctl.
+Different interfaces can be assigned different values via the
+dev.cxgbe.X.qsize_txq sysctl or dev.cxl.X.qsize_txq sysctl.
 This sysctl works only when the interface has never been marked up (as done by
 ifconfig up).
 .It Va hw.cxgbe.qsize_rxq
 The size, in number of entries, of the descriptor ring used for an
 rx queue.
 The default value is 1024.
-Different cxgbe interfaces can be assigned different values via the
-dev.cxgbe.X.qsize_rxq sysctl.
+Different interfaces can be assigned different values via the
+dev.cxgbe.X.qsize_rxq or dev.cxl.X.qsize_rxq sysctl.
 This sysctl works only when the interface has never been marked up (as done by
 ifconfig up).
 .It Va hw.cxgbe.interrupt_types
@@ -188,6 +225,43 @@ already on the card.
 long as it is compatible with the driver and is a different version than
 the one already on the card.
 The default is 1.
+.It Va hw.cxgbe.fl_pktshift
+The number of bytes of padding inserted before the begining of an Ethernet
+frame in the receive buffer.
+The default value of 2 ensures that the Ethernet payload (usually the IP header)
+is at a 4 byte aligned address.
+0-7 are all valid values.
+.It Va hw.cxgbe.fl_pad
+A non-zero value ensures that writes from the hardware to a receive buffer are
+padded up to the specified boundary.
+The default is -1 which lets the driver pick a pad boundary.
+0 disables trailer padding completely.
+.It Va hw.cxgbe.cong_drop
+Controls the hardware response to congestion.
+-1 disables congestion feedback and is not recommended.
+0 instructs the hardware to backpressure its pipeline on congestion.
+This usually results in the port emitting pause frames.
+1 instructs the hardware to drop frames destined for congested queues.
+.It Va hw.cxgbe.buffer_packing
+Allow the hardware to deliver multiple frames in the same receive buffer
+opportunistically.
+The default is -1 which lets the driver decide.
+0 or 1 explicitly disable or enable this feature.
+.It Va hw.cxgbe.allow_mbufs_in_cluster
+1 allows the driver to lay down one or more mbufs within the receive buffer
+opportunistically.  This is the default.
+0 prohibits the driver from doing so.
+.It Va hw.cxgbe.largest_rx_cluster
+.It Va hw.cxgbe.safest_rx_cluster
+Sizes of rx clusters.  Each of these must be set to one of the sizes available
+(usually 2048, 4096, 9216, and 16384) and largest_rx_cluster must be greater
+than or equal to safest_rx_cluster.
+The defaults are 16384 and 4096 respectively.
+The driver will never attempt to allocate a receive buffer larger than
+largest_rx_cluster and will fall back to allocating buffers of
+safest_rx_cluster size if an allocation larger than safest_rx_cluster fails.
+Note that largest_rx_cluster merely establishes a ceiling -- the driver is
+allowed to allocate buffers of smaller sizes.
 .It Va hw.cxgbe.config_file
 Select a pre-packaged device configuration file.
 A configuration file contains a recipe for partitioning and configuring the
@@ -195,7 +269,7 @@ hardware resources on the card.
 This tunable is for specialized applications only and should not be used in
 normal operation.
 The configuration profile currently in use is available in the dev.t4nex.X.cf
-and dev.t4nex.X.cfcsum sysctls.
+and dev.t4nex.X.cfcsum (dev.t5nex for T5 cards) sysctls.
 .It Va hw.cxgbe.linkcaps_allowed
 .It Va hw.cxgbe.niccaps_allowed
 .It Va hw.cxgbe.toecaps_allowed
@@ -209,7 +283,7 @@ capability.
 This tunable is for specialized applications only and should not be used in
 normal operation.
 The capabilities for which hardware resources have been reserved are listed in
-dev.t4nex.X.*caps sysctls.
+dev.t4nex.X.*caps or dev.t5nex.X.*caps sysctls.
 .El
 .Sh SUPPORT
 For general information and support,
@@ -231,6 +305,10 @@ The
 .Nm
 device driver first appeared in
 .Fx 9.0 .
+Support for T5 cards first appeared in
+.Fx 9.2
+and
+.Fx 10.0 .
 .Sh AUTHORS
 .An -nosplit
 The

More information about the svn-src-all mailing list