svn commit: r265236 - in head: share/man/man4 sys/amd64/conf sys/conf sys/dev/mpr sys/dev/mpr/mpi sys/i386/conf sys/ia64/conf sys/mips/conf sys/modules sys/modules/mpr sys/sparc64/conf
Kenneth D. Merry
ken at FreeBSD.org
Fri May 2 20:25:10 UTC 2014
Author: ken
Date: Fri May 2 20:25:09 2014
New Revision: 265236
URL: http://svnweb.freebsd.org/changeset/base/265236
Log:
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell at lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr at spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
Added:
head/share/man/man4/mpr.4 (contents, props changed)
head/sys/dev/mpr/
head/sys/dev/mpr/mpi/
head/sys/dev/mpr/mpi/mpi2.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_cnfg.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_hbd.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_history.txt (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_init.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_ioc.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_ra.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_raid.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_sas.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_targ.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_tool.h (contents, props changed)
head/sys/dev/mpr/mpi/mpi2_type.h (contents, props changed)
head/sys/dev/mpr/mpr.c (contents, props changed)
head/sys/dev/mpr/mpr_config.c (contents, props changed)
head/sys/dev/mpr/mpr_ioctl.h (contents, props changed)
head/sys/dev/mpr/mpr_mapping.c (contents, props changed)
head/sys/dev/mpr/mpr_mapping.h (contents, props changed)
head/sys/dev/mpr/mpr_pci.c (contents, props changed)
head/sys/dev/mpr/mpr_sas.c (contents, props changed)
head/sys/dev/mpr/mpr_sas.h (contents, props changed)
head/sys/dev/mpr/mpr_sas_lsi.c (contents, props changed)
head/sys/dev/mpr/mpr_table.c (contents, props changed)
head/sys/dev/mpr/mpr_table.h (contents, props changed)
head/sys/dev/mpr/mpr_user.c (contents, props changed)
head/sys/dev/mpr/mprvar.h (contents, props changed)
head/sys/modules/mpr/
head/sys/modules/mpr/Makefile (contents, props changed)
Modified:
head/sys/amd64/conf/GENERIC
head/sys/conf/files
head/sys/i386/conf/GENERIC
head/sys/i386/conf/XEN
head/sys/ia64/conf/GENERIC
head/sys/mips/conf/OCTEON1
head/sys/modules/Makefile
head/sys/sparc64/conf/GENERIC
Added: head/share/man/man4/mpr.4
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/share/man/man4/mpr.4 Fri May 2 20:25:09 2014 (r265236)
@@ -0,0 +1,226 @@
+.\"
+.\" Copyright (c) 2010 Spectra Logic Corporation
+.\" Copyright (c) 2014 LSI Corp
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions, and the following disclaimer,
+.\" without modification.
+.\" 2. Redistributions in binary form must reproduce at minimum a disclaimer
+.\" substantially similar to the "NO WARRANTY" disclaimer below
+.\" ("Disclaimer") and any redistribution must be conditioned upon
+.\" including a substantially similar Disclaimer requirement for further
+.\" binary redistribution.
+.\"
+.\" NO WARRANTY
+.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+.\" A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+.\" HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+.\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGES.
+.\"
+.\" mpr driver man page.
+.\"
+.\" Author: Ken Merry <ken at FreeBSD.org>
+.\" Author: Stephen McConnell <stephen.mcconnell at lsi.com>
+.\"
+.\" $Id$
+.\" $FreeBSD$
+.\"
+.Dd Apr 28, 2014
+.Dt MPR 4
+.Os
+.Sh NAME
+.Nm mpr
+.Nd "LSI Fusion-MPT 3 IT/IR 12Gb/s Serial Attached SCSI/SATA driver"
+.Sh SYNOPSIS
+To compile this driver into the kernel, place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd "device pci"
+.Cd "device scbus"
+.Cd "device mpr"
+.Ed
+.Pp
+Or, to load the driver as a module at boot, place the following line in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+mpr_load="YES"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for LSI Fusion-MPT 3 IT/IR
+.Tn SAS
+controllers.
+.Sh HARDWARE
+The following controllers are supported by the
+.Nm
+driver
+.Pp
+.Bl -bullet -compact
+.It
+LSI SAS 3004 (4 Port SAS)
+.It
+LSI SAS 3008 (8 Port SAS)
+.It
+LSI SAS 3108 (8 Port SAS)
+.El
+.Sh CONFIGURATION
+To disable MSI interrupts for all
+.Nm
+driver instances, set the following tunable value in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+hw.mpr.disable_msi=1
+.Ed
+.Pp
+To disable MSI interrupts for a specific
+.Nm
+driver instance, set the following tunable value in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+dev.mpr.X.disable_msi=1
+.Ed
+.Pp
+where X is the adapter number.
+.Pp
+To disable MSI-X interrupts for all
+.Nm
+driver instances, set the following tunable value in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+hw.mpr.disable_msix=1
+.Ed
+.Pp
+To disable MSI-X interrupts for a specific
+.Nm
+driver instance, set the following tunable value in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+dev.mpr.X.disable_msix=1
+.Ed
+.Pp
+To set the maximum number of DMA chains allocated for all adapters, set
+the following variable in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+hw.mpr.max_chains=NNNN
+.Ed
+.Pp
+To set the maximum number of DMA chains allocated for a specific adapter,
+set the following variable in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+dev.mpr.X.max_chains=NNNN
+.Ed
+.Pp
+This variable may also be viewed via
+.Xr sysctl 8
+to see the maximum set for a given adapter.
+.Pp
+The current number of free chain frames may be seen via the
+dev.mpr.X.chain_free
+.Xr sysctl 8
+variable.
+.Pp
+The lowest number of free chain frames may be seen via the
+dev.mpr.X.chain_free_lowwater
+.Xr sysctl 8
+variable.
+.Pp
+The current number of active I/O commands is shown in the
+dev.mpr.X.io_cmds_active
+.Xr sysctl 8
+variable.
+.Pp
+The maximum number of active I/O commands seen since boot is shown in the
+dev.mpr.X.io_cmds_highwater
+.Xr sysctl 8
+variable.
+.Pp
+Devices can be excluded from
+.Nm
+control for all adapters by setting the following variable in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+hw.mpr.exclude_ids=Y
+.Ed
+.Pp
+where Y is the target ID of the device. If more than one device is to be
+excluded, target ID's are separated by commas.
+.Pp
+Devices can be excluded from
+.Nm
+control for a specific adapter by setting the following variable in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+dev.mpr.X.exclude_ids=Y
+.Ed
+.Pp
+where X is the adapter number and Y is the target ID of the device. If more
+than one device is to be excluded, target ID's are separated by commas.
+.Sh DEBUGGING
+To enable debugging prints from the
+.Nm
+driver, set the
+.Bd -literal -offset indent
+hw.mpr.X.debug_level
+.Ed
+.Pp
+variable, where X is the adapter number, either in
+.Xr loader.conf 5
+or via
+.Xr sysctl 8 .
+The following bits have the described effects:
+.Bd -literal -offset indent
+0x0001 Enable informational prints.
+0x0002 Enable prints for driver faults.
+0x0004 Enable prints for controller events.
+0x0008 Enable prints for controller logging.
+0x0010 Enable prints for tracing recovery operations.
+0x0020 Enable prints for parameter errors and programming bugs.
+0x0040 Enable prints for system initialization operations.
+0x0080 Enable prints for more detailed information.
+0x0100 Enable prints for user-generated commands.
+0x0200 Enable prints for device mapping.
+0x0400 Enable prints for tracing through driver functions.
+.Ed
+.Sh SEE ALSO
+.Xr cam 4 ,
+.Xr cd 4 ,
+.Xr ch 4 ,
+.Xr da 4 ,
+.Xr mpt 4 ,
+.Xr mps 4 ,
+.Xr pci 4 ,
+.Xr sa 4 ,
+.Xr scsi 4 ,
+.Xr targ 4 ,
+.Xr loader.conf 5 ,
+.Xr sysctl 8
+.Sh HISTORY
+The
+.Nm
+driver first appeared in FreeBSD 9.3.
+.Sh AUTHORS
+The
+.Nm
+driver was originally written by
+.An -nosplit
+.An Scott Long Aq scottl at FreeBSD.org .
+It has been improved and tested by LSI Corporation.
+.Pp
+This man page was written by
+.An Ken Merry Aq ken at FreeBSD.org
+with additional input from
+.An Stephen McConnell Aq stephen.mcconnell at lsi.com .
Modified: head/sys/amd64/conf/GENERIC
==============================================================================
--- head/sys/amd64/conf/GENERIC Fri May 2 20:13:52 2014 (r265235)
+++ head/sys/amd64/conf/GENERIC Fri May 2 20:25:09 2014 (r265236)
@@ -119,6 +119,7 @@ device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
device mps # LSI-Logic MPT-Fusion 2
+device mpr # LSI-Logic MPT-Fusion 3
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files Fri May 2 20:13:52 2014 (r265235)
+++ head/sys/conf/files Fri May 2 20:25:09 2014 (r265236)
@@ -1804,6 +1804,17 @@ dev/mmc/mmcbr_if.m standard
dev/mmc/mmcbus_if.m standard
dev/mmc/mmcsd.c optional mmcsd
dev/mn/if_mn.c optional mn pci
+dev/mpr/mpr.c optional mpr
+dev/mpr/mpr_config.c optional mpr
+# XXX Work around clang warning, until maintainer approves fix.
+dev/mpr/mpr_mapping.c optional mpr \
+ compile-with "${NORMAL_C} ${NO_WSOMETIMES_UNINITIALIZED}"
+dev/mpr/mpr_pci.c optional mpr pci
+dev/mpr/mpr_sas.c optional mpr \
+ compile-with "${NORMAL_C} ${NO_WUNNEEDED_INTERNAL_DECL}"
+dev/mpr/mpr_sas_lsi.c optional mpr
+dev/mpr/mpr_table.c optional mpr
+dev/mpr/mpr_user.c optional mpr
dev/mps/mps.c optional mps
dev/mps/mps_config.c optional mps
# XXX Work around clang warning, until maintainer approves fix.
Added: head/sys/dev/mpr/mpi/mpi2.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/mpr/mpi/mpi2.h Fri May 2 20:25:09 2014 (r265236)
@@ -0,0 +1,1257 @@
+/*-
+ * Copyright (c) 2013 LSI Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the author nor the names of any co-contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * LSI MPT-Fusion Host Adapter FreeBSD
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * Copyright (c) 2000-2013 LSI Corporation.
+ *
+ *
+ * Name: mpi2.h
+ * Title: MPI Message independent structures and definitions
+ * including System Interface Register Set and
+ * scatter/gather formats.
+ * Creation Date: June 21, 2006
+ *
+ * mpi2.h Version: 02.00.33
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved ReplyPostHostIndex register to offset 0x6C of the
+ * MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ * MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ * Added union of request descriptors.
+ * Added union of reply descriptors.
+ * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added define for MPI2_VERSION_02_00.
+ * Fixed the size of the FunctionDependent5 field in the
+ * MPI2_DEFAULT_REPLY structure.
+ * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Removed the MPI-defined Fault Codes and extended the
+ * product specific codes up to 0xEFFF.
+ * Added a sixth key value for the WriteSequence register
+ * and changed the flush value to 0x0.
+ * Added message function codes for Diagnostic Buffer Post
+ * and Diagnsotic Release.
+ * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ * Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added #defines for marking a reply descriptor as unused.
+ * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved LUN field defines from mpi2_init.h.
+ * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
+ * In all request and reply descriptors, replaced VF_ID
+ * field with MSIxIndex field.
+ * Removed DevHandle field from
+ * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ * bytes reserved.
+ * Added RAID Accelerator functionality.
+ * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MSI-x index mask and shift for Reply Post Host
+ * Index register.
+ * Added function code for Host Based Discovery Action.
+ * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
+ * Added defines for product-specific range of message
+ * function codes, 0xF0 to 0xFF.
+ * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added alternative defines for the SGE Direction bit.
+ * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Incorporating additions for MPI v2.5.
+ * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added Hard Reset delay timings.
+ * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
+ * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_H
+#define MPI2_H
+
+
+/*****************************************************************************
+*
+* MPI Version Definitions
+*
+*****************************************************************************/
+
+#define MPI2_VERSION_MAJOR_MASK (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT (8)
+#define MPI2_VERSION_MINOR_MASK (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT (0)
+
+/* major version for all MPI v2.x */
+#define MPI2_VERSION_MAJOR (0x02)
+
+/* minor version for MPI v2.0 compatible products */
+#define MPI2_VERSION_MINOR (0x00)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI2_VERSION_MINOR)
+#define MPI2_VERSION_02_00 (0x0200)
+
+
+/* minor version for MPI v2.5 compatible products */
+#define MPI25_VERSION_MINOR (0x05)
+#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI25_VERSION_MINOR)
+#define MPI2_VERSION_02_05 (0x0205)
+
+
+/* Unit and Dev versioning for this MPI header set */
+#define MPI2_HEADER_VERSION_UNIT (0x21)
+#define MPI2_HEADER_VERSION_DEV (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
+#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
+
+
+/*****************************************************************************
+*
+* IOC State Definitions
+*
+*****************************************************************************/
+
+#define MPI2_IOC_STATE_RESET (0x00000000)
+#define MPI2_IOC_STATE_READY (0x10000000)
+#define MPI2_IOC_STATE_OPERATIONAL (0x20000000)
+#define MPI2_IOC_STATE_FAULT (0x40000000)
+
+#define MPI2_IOC_STATE_MASK (0xF0000000)
+#define MPI2_IOC_STATE_SHIFT (28)
+
+/* Fault state range for prodcut specific codes */
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000)
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF)
+
+
+/*****************************************************************************
+*
+* System Interface Register Definitions
+*
+*****************************************************************************/
+
+typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
+{
+ U32 Doorbell; /* 0x00 */
+ U32 WriteSequence; /* 0x04 */
+ U32 HostDiagnostic; /* 0x08 */
+ U32 Reserved1; /* 0x0C */
+ U32 DiagRWData; /* 0x10 */
+ U32 DiagRWAddressLow; /* 0x14 */
+ U32 DiagRWAddressHigh; /* 0x18 */
+ U32 Reserved2[5]; /* 0x1C */
+ U32 HostInterruptStatus; /* 0x30 */
+ U32 HostInterruptMask; /* 0x34 */
+ U32 DCRData; /* 0x38 */
+ U32 DCRAddress; /* 0x3C */
+ U32 Reserved3[2]; /* 0x40 */
+ U32 ReplyFreeHostIndex; /* 0x48 */
+ U32 Reserved4[8]; /* 0x4C */
+ U32 ReplyPostHostIndex; /* 0x6C */
+ U32 Reserved5; /* 0x70 */
+ U32 HCBSize; /* 0x74 */
+ U32 HCBAddressLow; /* 0x78 */
+ U32 HCBAddressHigh; /* 0x7C */
+ U32 Reserved6[16]; /* 0x80 */
+ U32 RequestDescriptorPostLow; /* 0xC0 */
+ U32 RequestDescriptorPostHigh; /* 0xC4 */
+ U32 Reserved7[14]; /* 0xC8 */
+} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
+ Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
+
+/*
+ * Defines for working with the Doorbell register.
+ */
+#define MPI2_DOORBELL_OFFSET (0x00000000)
+
+/* IOC --> System values */
+#define MPI2_DOORBELL_USED (0x08000000)
+#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000)
+#define MPI2_DOORBELL_WHO_INIT_SHIFT (24)
+#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF)
+#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF)
+
+/* System --> IOC values */
+#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000)
+#define MPI2_DOORBELL_FUNCTION_SHIFT (24)
+#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
+#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16)
+
+
+/*
+ * Defines for the WriteSequence register
+ */
+#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
+#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
+#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
+
+/*
+ * Defines for the HostDiagnostic register
+ */
+#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
+
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
+
+#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
+#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
+#define MPI2_DIAG_HCB_MODE (0x00000100)
+#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080)
+#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040)
+#define MPI2_DIAG_RESET_HISTORY (0x00000020)
+#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010)
+#define MPI2_DIAG_RESET_ADAPTER (0x00000004)
+#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002)
+
+/*
+ * Offsets for DiagRWData and address
+ */
+#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010)
+#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014)
+#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018)
+
+/*
+ * Defines for the HostInterruptStatus register
+ */
+#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
+#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000)
+#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
+#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000)
+#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008)
+#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001)
+#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
+
+/*
+ * Defines for the HostInterruptMask register
+ */
+#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
+#define MPI2_HIM_RESET_IRQ_MASK (0x40000000)
+#define MPI2_HIM_REPLY_INT_MASK (0x00000008)
+#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK
+#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001)
+#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK
+
+/*
+ * Offsets for DCRData and address
+ */
+#define MPI2_DCR_DATA_OFFSET (0x00000038)
+#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C)
+
+/*
+ * Offset for the Reply Free Queue
+ */
+#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
+
+/*
+ * Defines for the Reply Descriptor Post Queue
+ */
+#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
+#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
+#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
+#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
+#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /* MPI v2.5 only */
+
+
+/*
+ * Defines for the HCBSize and address
+ */
+#define MPI2_HCB_SIZE_OFFSET (0x00000074)
+#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000)
+#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001)
+
+#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078)
+#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
+
+/*
+ * Offsets for the Request Queue
+ */
+#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
+#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
+
+
+/* Hard Reset delay timings */
+#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000)
+#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000)
+#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000)
+
+/*****************************************************************************
+*
+* Message Descriptors
+*
+*****************************************************************************/
+
+/* Request Descriptors */
+
+/* Default Request Descriptor */
+typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
+{
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 DescriptorTypeDependent; /* 0x06 */
+} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+ Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
+
+/* defines for the RequestFlags field */
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
+#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C)
+
+#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
+
+
+/* High Priority Request Descriptor */
+typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
+{
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 Reserved1; /* 0x06 */
+} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+ Mpi2HighPriorityRequestDescriptor_t,
+ MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
+
+
+/* SCSI IO Request Descriptor */
+typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+{
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 DevHandle; /* 0x06 */
+} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+ Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
+
+
+/* SCSI Target Request Descriptor */
+typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
+{
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 IoIndex; /* 0x06 */
+} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+ Mpi2SCSITargetRequestDescriptor_t,
+ MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
+
+
+/* RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR
+{
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 Reserved; /* 0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ Mpi2RAIDAcceleratorRequestDescriptor_t,
+ MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+
+/* Fast Path SCSI IO Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+ MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+ Mpi25FastPathSCSIIORequestDescriptor_t,
+ MPI2_POINTER pMpi25FastPathSCSIIORequestDescriptor_t;
+
+
+/* union of Request Descriptors */
+typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
+{
+ MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+ MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+ MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+ MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+ MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+ MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+ U64 Words;
+} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
+ Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
+
+
+/* Reply Descriptors */
+
+/* Default Reply Descriptor */
+typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 DescriptorTypeDependent1; /* 0x02 */
+ U32 DescriptorTypeDependent2; /* 0x04 */
+} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
+ Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
+
+/* defines for the ReplyFlags field */
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
+#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
+
+/* values for marking a reply descriptor as unused */
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
+
+/* Address Reply Descriptor */
+typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U32 ReplyFrameAddress; /* 0x04 */
+} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
+ Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
+
+#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00)
+
+
+/* SCSI IO Success Reply Descriptor */
+typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 TaskTag; /* 0x04 */
+ U16 Reserved1; /* 0x06 */
+} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2SCSIIOSuccessReplyDescriptor_t,
+ MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
+
+
+/* TargetAssist Success Reply Descriptor */
+typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U8 SequenceNumber; /* 0x04 */
+ U8 Reserved1; /* 0x05 */
+ U16 IoIndex; /* 0x06 */
+} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2TargetAssistSuccessReplyDescriptor_t,
+ MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
+
+
+/* Target Command Buffer Reply Descriptor */
+typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U8 VP_ID; /* 0x02 */
+ U8 Flags; /* 0x03 */
+ U16 InitiatorDevHandle; /* 0x04 */
+ U16 IoIndex; /* 0x06 */
+} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+ Mpi2TargetCommandBufferReplyDescriptor_t,
+ MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
+
+/* defines for Flags field */
+#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
+
+
+/* RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+{
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U32 Reserved; /* 0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+ MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+
+/* Fast Path SCSI IO Success Reply Descriptor */
+typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
+ MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
+ MPI2_POINTER pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+
+
+/* union of Reply Descriptors */
+typedef union _MPI2_REPLY_DESCRIPTORS_UNION
+{
+ MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+ MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+ MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+ MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+ MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+ MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
+ MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+ U64 Words;
+} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
+ Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
+
+
+
+/*****************************************************************************
+*
+* Message Functions
+*
+*****************************************************************************/
+
+#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
+#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */
+#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
+#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */
+#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */
+#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */
+#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */
+#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */
+#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */
+#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */
+#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */
+#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */
+#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */
+#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */
+#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */
+#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */
+#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */
+#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */
+#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */
+#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */
+#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */
+#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */
+#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
+#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
+#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
+#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator */
+#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Host Based Discovery Action */
+#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) /* Power Management Control */
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) /* Send Host Message */
+#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* beginning of product-specific range */
+#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* end of product-specific range */
+
+
+
+/* Doorbell functions */
+#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
+#define MPI2_FUNCTION_HANDSHAKE (0x42)
+
+
+/*****************************************************************************
+*
+* IOC Status Values
+*
+*****************************************************************************/
+
+/* mask for IOCStatus status value */
+#define MPI2_IOCSTATUS_MASK (0x7FFF)
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SUCCESS (0x0000)
+#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI2_IOCSTATUS_BUSY (0x0002)
+#define MPI2_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI2_IOCSTATUS_INVALID_VPID (0x0005)
+#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
+#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
+#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
+#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
+#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
+#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
+#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063)
+#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
+#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
+#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
+#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
+#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
+#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
+#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
+
+/****************************************************************************
+* RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
+
+/****************************************************************************
+* IOCStatus flag to indicate that log info is available
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
+
+/****************************************************************************
+* IOCLogInfo Types
+****************************************************************************/
+
+#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000)
+#define MPI2_IOCLOGINFO_TYPE_SHIFT (28)
+#define MPI2_IOCLOGINFO_TYPE_NONE (0x0)
+#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1)
+#define MPI2_IOCLOGINFO_TYPE_FC (0x2)
+#define MPI2_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4)
+#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
+
+
+/*****************************************************************************
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-all
mailing list