svn commit: r256912 - in head/sys: boot/fdt/dts mips/conf
Brooks Davis
brooks at FreeBSD.org
Tue Oct 22 15:45:34 UTC 2013
Author: brooks
Date: Tue Oct 22 15:45:31 2013
New Revision: 256912
URL: http://svnweb.freebsd.org/changeset/base/256912
Log:
Sync BERI kernel configs with P4:
Switch the majority of device configuration to FDT from hints.
Add BERI_*_BASE configs to reduce duplication in the MDROOT and SDROOT
kernels.
Add NFS and GSSAPI support by default.
MFC after: 3 days
Sponsored by: DARPA/AFRL
Added:
head/sys/boot/fdt/dts/beri-sim.dts (contents, props changed)
head/sys/boot/fdt/dts/beripad-de4.dts (contents, props changed)
head/sys/mips/conf/BERI_DE4_BASE (contents, props changed)
head/sys/mips/conf/BERI_SIM_BASE (contents, props changed)
head/sys/mips/conf/BERI_SIM_SDROOT (contents, props changed)
Modified:
head/sys/mips/conf/BERI_DE4.hints
head/sys/mips/conf/BERI_DE4_MDROOT
head/sys/mips/conf/BERI_DE4_SDROOT
head/sys/mips/conf/BERI_SIM_MDROOT
head/sys/mips/conf/BERI_TEMPLATE
Added: head/sys/boot/fdt/dts/beri-sim.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/beri-sim.dts Tue Oct 22 15:45:31 2013 (r256912)
@@ -0,0 +1,144 @@
+/*-
+ * Copyright (c) 2012-2013 Robert N. M. Watson
+ * Copyright (c) 2013 SRI International
+ * All rights reserved.
+ *
+ * This software was developed by SRI International and the University of
+ * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
+ * ("CTSRD"), as part of the DARPA CRASH research programme.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+
+/*
+ * Device names here have been largely made up on the spot, especially for the
+ * "compatible" strings, and might want to be revised.
+ *
+ * For now, use 32-bit addressing as our Avalon bus is 32-bit. However, in
+ * the future, we should likely change to 64-bit.
+ */
+
+/ {
+ model = "SRI/Cambridge BERI simulation";
+ compatible = "sri-cambridge,beri-sim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * Secondary CPUs all start disabled and use the
+ * spin-table enable method. cpu-release-addr must be
+ * specified for each cpu other than cpu at 0. Values of
+ * cpu-release-addr grow down from 0x100000 (kernel).
+ */
+ status = "disabled";
+ enable-method = "spin-table";
+
+ cpu at 0 {
+ device-type = "cpu";
+ compatible = "sri-cambridge,beri";
+
+ reg = <0>;
+ status = "okay";
+ };
+
+/*
+ cpu at 1 {
+ device-type = "cpu";
+ compatible = "sri-cambridge,beri";
+
+ reg = <1>;
+ // XXX: should we need cached prefix?
+ cpu-release-addr = <0xffffffff 0x800fffe0>;
+ };
+*/
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ /*
+ * Declare mips,mips4k since BERI doesn't (yet) have a PIC, so
+ * we use mips4k coprocessor 0 interrupt management directly.
+ */
+ compatible = "simple-bus", "mips,mips4k";
+ ranges = <>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ beripic: beripic at 7f804000 {
+ compatible = "sri-cambridge,beri-pic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x7f804000 0x400
+ 0x7f806000 0x10
+ 0x7f806080 0x10
+ 0x7f806100 0x10>;
+ interrupts = <0 1 2 3 4>;
+ hard-interrupt-sources = <64>;
+ soft-interrupt-sources = <64>;
+ };
+
+ serial at 7f000000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f000000 0x40>;
+ interrupts = <0>;
+ interrupt-parent = <&beripic>;
+ };
+
+ serial at 7f001000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f001000 0x40>;
+ };
+
+ serial at 7f002000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f002000 0x40>;
+ };
+
+ sdcard at 7f008000 {
+ compatible = "altera,sdcard_11_2011";
+ reg = <0x7f008000 0x400>;
+ };
+
+ avgen at 0x7f00a000 {
+ compatible = "sri-cambridge,avgen";
+ reg = <0x7f00a000 0x14>;
+ sri-cambridge,width = <4>;
+ sri-cambridge,fileio = "rw";
+ sri-cambridge,devname = "berirom";
+ };
+ };
+};
Added: head/sys/boot/fdt/dts/beripad-de4.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/beripad-de4.dts Tue Oct 22 15:45:31 2013 (r256912)
@@ -0,0 +1,266 @@
+/*-
+ * Copyright (c) 2012-2013 Robert N. M. Watson
+ * Copyright (c) 2013 SRI International
+ * All rights reserved.
+ *
+ * This software was developed by SRI International and the University of
+ * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
+ * ("CTSRD"), as part of the DARPA CRASH research programme.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+
+/*
+ * Device names here have been largely made up on the spot, especially for the
+ * "compatible" strings, and might want to be revised.
+ *
+ * For now, use 32-bit addressing as our Avalon bus is 32-bit. However, in
+ * the future, we should likely change to 64-bit.
+ */
+
+/ {
+ model = "SRI/Cambridge BeriPad (DE4)";
+ compatible = "sri-cambridge,beripad-de4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * Secondary CPUs all start disabled and use the
+ * spin-table enable method. cpu-release-addr must be
+ * specified for each cpu other than cpu at 0. Values of
+ * cpu-release-addr grow down from 0x100000 (kernel).
+ */
+ status = "disabled";
+ enable-method = "spin-table";
+
+ cpu at 0 {
+ device-type = "cpu";
+ compatible = "sri-cambridge,beri";
+
+ reg = <0>;
+ status = "okay";
+ };
+
+/*
+ cpu at 1 {
+ device-type = "cpu";
+ compatible = "sri-cambridge,beri";
+
+ reg = <1>;
+ // XXX: should we need cached prefix?
+ cpu-release-addr = <0xffffffff 0x800fffe0>;
+ };
+*/
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ /*
+ * Declare mips,mips4k since BERI doesn't (yet) have a PIC, so
+ * we use mips4k coprocessor 0 interrupt management directly.
+ */
+ compatible = "simple-bus", "mips,mips4k";
+ ranges = <>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // 1G at 0x0
+ };
+
+ beripic: beripic at 7f804000 {
+ compatible = "sri-cambridge,beri-pic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x7f804000 0x400
+ 0x7f806000 0x10
+ 0x7f806080 0x10
+ 0x7f806100 0x10>;
+ interrupts = <0 1 2 3 4>;
+ hard-interrupt-sources = <64>;
+ soft-interrupt-sources = <64>;
+ };
+
+ serial at 7f002100 {
+ compatible = "ns16550";
+ reg = <0x7f002100 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <50000000>;
+ interrupts = <6>;
+ interrupt-parent = <&beripic>;
+ };
+
+ serial at 7f000000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f000000 0x40>;
+ interrupts = <0>;
+ interrupt-parent = <&beripic>;
+ };
+
+ serial at 7f001000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f001000 0x40>;
+ };
+
+ serial at 7f002000 {
+ compatible = "altera,jtag_uart-11_0";
+ reg = <0x7f002000 0x40>;
+ };
+
+ sdcard at 7f008000 {
+ compatible = "altera,sdcard_11_2011";
+ reg = <0x7f008000 0x400>;
+ };
+
+ led at 7f006000 {
+ compatible = "sri-cambridge,de4led";
+ reg = <0x7f006000 0x1>;
+ };
+
+ /*
+ * XXX-BZ keep flash before ethernet so that atse can read the
+ * Ethernet addresses for now.
+ */
+ flash at 74000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x74000000 0x4000000>;
+
+ /* Board configuration */
+ partition at 0 {
+ reg = <0x0 0x20000>;
+ label = "config";
+ };
+
+ /* Power up FPGA image */
+ partition at 20000 {
+ reg = <0x20000 0xc00000>;
+ label = "fpga0";
+ };
+
+ /* Secondary FPGA image (on RE_CONFIGn button) */
+ partition at C20000 {
+ reg = <0xc20000 0xc00000>;
+ label = "fpga1";
+ };
+
+ /* Space for operating system use */
+ partition at 1820000 {
+ reg = <0x1820000 0x027c0000>;
+ label = "os";
+ };
+
+ /* Second stage bootloader */
+ parition at 3fe0000 {
+ reg = <0x3fe0000 0x20000>;
+ label = "boot";
+ };
+ };
+
+ ethernet at 7f007000 {
+ compatible = "altera,atse";
+ // MAC, RX+RXC, TX+TXC.
+ reg = <0x7f007000 0x400
+ 0x7f007500 0x8
+ 0x7f007520 0x20
+ 0x7f007400 0x8
+ 0x7f007420 0x20>;
+ // RX, TX
+ interrupts = <1 2>;
+ interrupt-parent = <&beripic>;
+ };
+
+ ethernet at 7f005000 {
+ compatible = "altera,atse";
+ // MAC, RX+RXC, TX+TXC.
+ reg = <0x7f005000 0x400
+ 0x7f005500 0x8
+ 0x7f005520 0x20
+ 0x7f005400 0x8
+ 0x7f005420 0x20>;
+ // RX, TX
+ interrupts = <11 12>;
+ interrupt-parent = <&beripic>;
+ };
+
+ touchscreen at 70400000 {
+ compatible = "sri-cambridge,mtl";
+ reg = <0x70400000 0x1000
+ 0x70000000 0x177000
+ 0x70177000 0x2000>;
+ };
+
+ usb at 0x7f100000 {
+ compatible = "philips,isp1761";
+ reg = <0x7f100000 0x40000
+ 0x7f140000 0x4>;
+ // IRQ 4 is DC, IRQ 5 is HC.
+ interrupts = <4 5>;
+ interrupt-parent = <&beripic>;
+ };
+
+ avgen at 0x7f009000 {
+ compatible = "sri-cambridge,avgen";
+ reg = <0x7f009000 0x2>;
+ sri-cambridge,width = <1>;
+ sri-cambridge,fileio = "r";
+ sri-cambridge,devname = "de4bsw";
+ };
+
+ avgen at 0x7f00a000 {
+ compatible = "sri-cambridge,avgen";
+ reg = <0x7f00a000 0x14>;
+ sri-cambridge,width = <4>;
+ sri-cambridge,fileio = "rw";
+ sri-cambridge,devname = "berirom";
+ };
+
+ avgen at 0x7f00c000 {
+ compatible = "sri-cambridge,avgen";
+ reg = <0x7f00c000 0x8>;
+ sri-cambridge,width = <4>;
+ sri-cambridge,fileio = "rw";
+ sri-cambridge,devname = "de4tempfan";
+ };
+
+ avgen at 0x7f100000 {
+ compatible = "sri-cambridge,avgen";
+ reg = <0x7f100000 0x40000>;
+ sri-cambridge,width = <4>;
+ sri-cambridge,fileio = "r";
+ sri-cambridge,devname = "usbmem";
+ };
+
+ };
+};
Modified: head/sys/mips/conf/BERI_DE4.hints
==============================================================================
--- head/sys/mips/conf/BERI_DE4.hints Tue Oct 22 15:29:59 2013 (r256911)
+++ head/sys/mips/conf/BERI_DE4.hints Tue Oct 22 15:45:31 2013 (r256912)
@@ -1,75 +1,26 @@
# $FreeBSD$
-#
-# Altera JTAG UARTs configured for console, debugging, and data putput on the
-# Terasic DE-4.
-#
-hint.altera_jtag_uart.0.at="nexus0"
-hint.altera_jtag_uart.0.maddr=0x7f000000
-hint.altera_jtag_uart.0.msize=0x40
-hint.altera_jtag_uart.0.irq=0
+# Hardwired location of bitfile
+hint.map.0.at="cfid0s.fpga0"
+hint.map.0.start=0x00000000
+hint.map.0.end=0x00c00000
+hint.map.0.name="fpga"
+
+# Kernel on the second chip
+hint.map.1.at="cfid0s.os"
+hint.map.1.start=0x007e0000
+hint.map.1.end=0x01fe0000
+hint.map.1.name="kernel"
+
+# Altera Triple-Speed Ethernet Mac, present in tPad and DE-4 configurations
+# configured from fdt(4) but PHYs are still described in here.
+# Currently configured for individual tse_mac cores.
+hint.e1000phy.0.at="miibus0"
+hint.e1000phy.0.phyno=0
+hint.e1000phy.1.at="miibus0"
+hint.e1000phy.1.phyno=0
+hint.e1000phy.2.at="miibus0"
+hint.e1000phy.2.phyno=0
+hint.e1000phy.3.at="miibus0"
+hint.e1000phy.3.phyno=0
-hint.altera_jtag_uart.1.at="nexus0"
-hint.altera_jtag_uart.1.maddr=0x7f001000
-hint.altera_jtag_uart.1.msize=0x40
-
-hint.altera_jtag_uart.2.at="nexus0"
-hint.altera_jtag_uart.2.maddr=0x7f002000
-hint.altera_jtag_uart.2.msize=0x40
-
-#
-# On-board DE4 and tPad SD Card IP core
-#
-hint.altera_sdcardc.0.at="nexus0"
-hint.altera_sdcardc.0.maddr=0x7f008000
-hint.altera_sdcardc.0.msize=0x400
-
-#
-# On-board DE4 8-element LED
-#
-hint.terasic_de4led.0.at="nexus0"
-hint.terasic_de4led.0.maddr=0x7f006000
-hint.terasic_de4led.0.msize=1
-hint.terasic_de4led.0.de4led_0_cmd="f9"
-
-#
-# Terasic Multi-touch LCD (MTL), an optional feature in DE-4 configurations.
-#
-hint.terasic_mtl.0.at="nexus0"
-hint.terasic_mtl.0.reg_maddr=0x70400000
-hint.terasic_mtl.0.reg_msize=0x1000
-hint.terasic_mtl.0.pixel_maddr=0x70000000
-hint.terasic_mtl.0.pixel_msize=0x177000
-hint.terasic_mtl.0.text_maddr=0x70177000
-hint.terasic_mtl.0.text_msize=0x2000
-
-#
-# BERI Hardware Version ROM
-#
-hint.altera_avgen.0.at="nexus0"
-hint.altera_avgen.0.maddr=0x7F00A000
-hint.altera_avgen.0.msize=20
-hint.altera_avgen.0.width=4
-hint.altera_avgen.0.fileio="rw"
-hint.altera_avgen.0.devname="berirom"
-
-#
-# Expose the DE4 flash via an Avalon "generic" device.
-#
-#hint.altera_avgen.0.at="nexus0"
-#hint.altera_avgen.0.maddr=0x74000000
-#hint.altera_avgen.0.msize=0x4000000
-#hint.altera_avgen.0.width=2
-#hint.altera_avgen.0.fileio="rw"
-#hint.altera_avgen.0.mmapio="rwx"
-#hint.altera_avgen.0.devname="de4flash"
-
-#
-# Expose the DE4 buttons and switches via an Avalon "generic" device.
-#
-hint.altera_avgen.0.at="nexus0"
-hint.altera_avgen.0.maddr=0x7f009000
-hint.altera_avgen.0.msize=2
-hint.altera_avgen.0.width=1
-hint.altera_avgen.0.fileio="r"
-hint.altera_avgen.0.devname="de4bsw"
Added: head/sys/mips/conf/BERI_DE4_BASE
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/conf/BERI_DE4_BASE Tue Oct 22 15:45:31 2013 (r256912)
@@ -0,0 +1,41 @@
+#
+# BERI_DE4_BASE -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible RISC
+# Implementation) FPGA soft core, as configured in its Terasic DE-4 reference
+# configuration. This kernel configration must be further specialized to
+# to include a root filesystem specification.
+#
+# $FreeBSD$
+#
+
+include "BERI_TEMPLATE"
+
+ident BERI_DE4_BASE
+
+options NFSCL # New Network Filesystem Client
+options NFSLOCKD # Network Lock Manager
+options NFS_ROOT # NFS usable as /, requires NFSCL
+
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=beripad-de4.dts
+
+hints "BERI_DE4.hints" # Flash partitions still use hints.
+
+device altera_atse
+device altera_avgen
+device altera_jtag_uart
+device altera_sdcard
+device terasic_de4led
+device terasic_mtl
+
+device bpf
+device cfi
+device cfid
+options CFI_SUPPORT_STRATAFLASH
+device sc
+
+device uart
+
+device miibus
+options DEVICE_POLLING
+
Modified: head/sys/mips/conf/BERI_DE4_MDROOT
==============================================================================
--- head/sys/mips/conf/BERI_DE4_MDROOT Tue Oct 22 15:29:59 2013 (r256911)
+++ head/sys/mips/conf/BERI_DE4_MDROOT Tue Oct 22 15:45:31 2013 (r256912)
@@ -1,29 +1,19 @@
#
-# BERI_DE4 -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible RISC
-# Implementation) FPGA soft core, as configured in its Terasic DE-4 reference
-# configuration.
+# BERI_DE4_MDROOT -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible
+# RISC # Implementation) FPGA soft core, as configured in its Terasic DE-4
+# reference configuration.
#
# $FreeBSD$
#
-include "BERI_TEMPLATE"
+include "BERI_DE4_BASE"
ident BERI_DE4_MDROOT
-hints "BERI_DE4.hints" #Default places to look for devices.
-
#
# This kernel configuration uses an embedded 8MB memory root file system.
# Adjust the following path based on local requirements.
#
options MD_ROOT # MD is a potential root device
-options MD_ROOT_SIZE=8192
+options MD_ROOT_SIZE=26112 # 25.5MB
options ROOTDEVNAME=\"ufs:md0\"
-
-device altera_avgen
-device altera_jtag_uart
-device altera_sdcard
-device terasic_de4led
-device terasic_mtl
-
-device sc
Modified: head/sys/mips/conf/BERI_DE4_SDROOT
==============================================================================
--- head/sys/mips/conf/BERI_DE4_SDROOT Tue Oct 22 15:29:59 2013 (r256911)
+++ head/sys/mips/conf/BERI_DE4_SDROOT Tue Oct 22 15:45:31 2013 (r256912)
@@ -1,23 +1,16 @@
#
-# BERI_DE4 -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible RISC
-# Implementation) FPGA soft core, as configured in its Terasic DE-4 reference
-# configuration.
+# BERI_DE4_SDROOT -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible
+# RISC Implementation) FPGA soft core, as configured in its Terasic DE-4
+# reference configuration.
#
# $FreeBSD$
#
-include "BERI_TEMPLATE"
+include "BERI_DE4_BASE"
ident BERI_DE4_SDROOT
-hints "BERI_DE4.hints" #Default places to look for devices.
-
-options ROOTDEVNAME=\"ufs:altera_sdcard0\"
-
-device altera_avgen
-device altera_jtag_uart
-device altera_sdcard
-device terasic_de4led
-device terasic_mtl
-
-device sc
+#
+# This kernel expects to find its root filesystem on the SD Card.
+#
+options ROOTDEVNAME=\"ufs:/dev/altera_sdcard0\"
Added: head/sys/mips/conf/BERI_SIM_BASE
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/conf/BERI_SIM_BASE Tue Oct 22 15:45:31 2013 (r256912)
@@ -0,0 +1,19 @@
+#
+# BERI_SIM_BASE -- Base kernel for the SRI/Cambridge "BERI" (Bluespec
+# Extensible RISC Implementation) FPGA soft core, as configured for
+# simulation.
+#
+# $FreeBSD$
+#
+
+include "BERI_TEMPLATE"
+
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=beri-sim.dts
+
+options ALTERA_SDCARD_FAST_SIM
+
+device altera_avgen
+device altera_jtag_uart
+device altera_sdcard
Modified: head/sys/mips/conf/BERI_SIM_MDROOT
==============================================================================
--- head/sys/mips/conf/BERI_SIM_MDROOT Tue Oct 22 15:29:59 2013 (r256911)
+++ head/sys/mips/conf/BERI_SIM_MDROOT Tue Oct 22 15:45:31 2013 (r256912)
@@ -1,24 +1,18 @@
#
-# BERI_SIM -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible RISC
-# Implementation) FPGA soft core, as configured for simulation.
+# BERI_SIM_MDROOT -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible
+# RISC Implementation) FPGA soft core, as configured for simulation.
#
# $FreeBSD$
#
-include "BERI_TEMPLATE"
+include "BERI_SIM_BASE"
ident BERI_SIM_MDROOT
-hints "BERI_SIM.hints" #Default places to look for devices.
-
#
-# This kernel configuration uses an embedded 8MB memory root file system.
+# This kernel configuration uses an embedded memory root file system.
# Adjust the following path based on local requirements.
#
options MD_ROOT # MD is a potential root device
-options MD_ROOT_SIZE=8192
+options MD_ROOT_SIZE=26112 # 25.5MB
options ROOTDEVNAME=\"ufs:md0\"
-
-device altera_avgen
-device altera_jtag_uart
-device altera_sdcard
Added: head/sys/mips/conf/BERI_SIM_SDROOT
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/conf/BERI_SIM_SDROOT Tue Oct 22 15:45:31 2013 (r256912)
@@ -0,0 +1,15 @@
+#
+# BERI_SIM_SDROOT -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible
+# RISC Implementation) FPGA soft core, as configured for simulation.
+#
+# $FreeBSD$
+#
+
+include "BERI_SIM_BASE"
+
+ident BERI_SIM_SDROOT
+
+#
+# This kernel expects to find its root filesystem on the SD Card.
+#
+options ROOTDEVNAME=\"ufs:/dev/altera_sdcard0\"
Modified: head/sys/mips/conf/BERI_TEMPLATE
==============================================================================
--- head/sys/mips/conf/BERI_TEMPLATE Tue Oct 22 15:29:59 2013 (r256911)
+++ head/sys/mips/conf/BERI_TEMPLATE Tue Oct 22 15:45:31 2013 (r256912)
@@ -39,7 +39,9 @@ options FFS #Berkeley Fast Filesystem
options INET
options INET6
+options KGSSAPI
options NFSCL
+options NFSLOCKD
options NFS_ROOT
# Debugging for use in -current
@@ -49,10 +51,11 @@ options INVARIANT_SUPPORT #Extra sanity
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
-device geom_map
-
-device md
+device crypto
+device cryptodev
device ether
+device geom_map
device loop
+device md
device random
device snp
More information about the svn-src-all
mailing list