svn commit: r253274 - head/sys/cam/scsi
Kenneth D. Merry
ken at FreeBSD.org
Fri Jul 12 17:09:51 UTC 2013
Author: ken
Date: Fri Jul 12 17:09:50 2013
New Revision: 253274
URL: http://svnweb.freebsd.org/changeset/base/253274
Log:
Fix a problem with READ ELEMENT STATUS that occurs on some
changers that don't support the DVCID and CURDATA bits that were
introduced in the SMC spec.
These changers will return an Illegal Request type error if the
bits are set. This causes "chio status" to fail.
The fix is two-fold. First, for changers that claim to be SCSI-2
or older, don't set the DVCID and CURDATA bits for READ ELEMENT
STATUS. For newer changers (SCSI-3 and newer), we default to
setting the new bits, but back off and try the READ ELEMENT STATUS
without the bits if we get an Illegal Request type error.
This has been tested on a Qualstar TLS-8211, which is a SCSI-2
changer that does not support the new bits, and a Spectra T-380,
which is a SCSI-3 changer that does support the new bits. In the
absence of a SCSI-3 changer that does not support the bits, I
tested that with some error injection code. (The SMC spec says
that support for CURDATA is mandatory, and DVCID is optional.)
scsi_ch.c: Add a new quirk, CH_Q_NO_DVCID that gets set for
SCSI-2 and older libraries, or newer libraries that
report errors when the DVCID/CURDATA bits are set.
In chgetelemstatus(), use the new quirk to
determine whether or not to set DVCID and CURDATA.
If we get an error with the bits set, back off and
try without the bits. Set the quirk flag if the
read element status succeeds without the bits set.
Increase the READ ELEMENT STATUS timeout to 60
seconds after testing with a Spectra T-380. The
previous value was 10 seconds, and too short for
the T-380. This may be decreased later after
some additional testing and investigation.
Tested by: Andre Albsmeier <Andre.Albsmeier at siemens.com>
Sponsored by: Spectra Logic
MFC after: 3 days
Modified:
head/sys/cam/scsi/scsi_ch.c
Modified: head/sys/cam/scsi/scsi_ch.c
==============================================================================
--- head/sys/cam/scsi/scsi_ch.c Fri Jul 12 16:41:58 2013 (r253273)
+++ head/sys/cam/scsi/scsi_ch.c Fri Jul 12 17:09:50 2013 (r253274)
@@ -102,7 +102,7 @@ static const u_int32_t CH_TIMEOUT_MODE_S
static const u_int32_t CH_TIMEOUT_MOVE_MEDIUM = 100000;
static const u_int32_t CH_TIMEOUT_EXCHANGE_MEDIUM = 100000;
static const u_int32_t CH_TIMEOUT_POSITION_TO_ELEMENT = 100000;
-static const u_int32_t CH_TIMEOUT_READ_ELEMENT_STATUS = 10000;
+static const u_int32_t CH_TIMEOUT_READ_ELEMENT_STATUS = 60000;
static const u_int32_t CH_TIMEOUT_SEND_VOLTAG = 10000;
static const u_int32_t CH_TIMEOUT_INITIALIZE_ELEMENT_STATUS = 500000;
@@ -122,12 +122,14 @@ typedef enum {
typedef enum {
CH_Q_NONE = 0x00,
- CH_Q_NO_DBD = 0x01
+ CH_Q_NO_DBD = 0x01,
+ CH_Q_NO_DVCID = 0x02
} ch_quirks;
#define CH_Q_BIT_STRING \
"\020" \
- "\001NO_DBD"
+ "\001NO_DBD" \
+ "\002NO_DVCID"
#define ccb_state ppriv_field0
#define ccb_bp ppriv_ptr1
@@ -396,6 +398,14 @@ chregister(struct cam_periph *periph, vo
periph->softc = softc;
softc->quirks = CH_Q_NONE;
+ /*
+ * The DVCID and CURDATA bits were not introduced until the SMC
+ * spec. If this device claims SCSI-2 or earlier support, then it
+ * very likely does not support these bits.
+ */
+ if (cgd->inq_data.version <= SCSI_REV_2)
+ softc->quirks |= CH_Q_NO_DVCID;
+
bzero(&cpi, sizeof(cpi));
xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
cpi.ccb_h.func_code = XPT_PATH_INQ;
@@ -1208,6 +1218,8 @@ chgetelemstatus(struct cam_periph *perip
caddr_t data = NULL;
size_t size, desclen;
int avail, i, error = 0;
+ int curdata, dvcid, sense_flags;
+ int try_no_dvcid = 0;
struct changer_element_status *user_data = NULL;
struct ch_softc *softc;
union ccb *ccb;
@@ -1239,14 +1251,31 @@ chgetelemstatus(struct cam_periph *perip
cam_periph_lock(periph);
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
+ sense_flags = SF_RETRY_UA;
+ if (softc->quirks & CH_Q_NO_DVCID) {
+ dvcid = 0;
+ curdata = 0;
+ } else {
+ dvcid = 1;
+ curdata = 1;
+ /*
+ * Don't print anything for an Illegal Request, because
+ * these flags can cause some changers to complain. We'll
+ * retry without them if we get an error.
+ */
+ sense_flags |= SF_QUIET_IR;
+ }
+
+retry_einval:
+
scsi_read_element_status(&ccb->csio,
/* retries */ 1,
/* cbfcnp */ chdone,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* voltag */ want_voltags,
/* sea */ softc->sc_firsts[chet],
- /* dvcid */ 1,
- /* curdata */ 1,
+ /* dvcid */ dvcid,
+ /* curdata */ curdata,
/* count */ 1,
/* data_ptr */ data,
/* dxfer_len */ 1024,
@@ -1254,9 +1283,38 @@ chgetelemstatus(struct cam_periph *perip
/* timeout */ CH_TIMEOUT_READ_ELEMENT_STATUS);
error = cam_periph_runccb(ccb, cherror, /*cam_flags*/ CAM_RETRY_SELTO,
- /*sense_flags*/ SF_RETRY_UA,
+ /*sense_flags*/ sense_flags,
softc->device_stats);
+ /*
+ * An Illegal Request sense key (only used if there is no asc/ascq)
+ * or 0x24,0x00 for an ASC/ASCQ both map to EINVAL. If dvcid or
+ * curdata are set (we set both or neither), try turning them off
+ * and see if the command is successful.
+ */
+ if ((error == EINVAL)
+ && (dvcid || curdata)) {
+ dvcid = 0;
+ curdata = 0;
+ error = 0;
+ /* At this point we want to report any Illegal Request */
+ sense_flags &= ~SF_QUIET_IR;
+ try_no_dvcid = 1;
+ goto retry_einval;
+ }
+
+ /*
+ * In this case, we tried a read element status with dvcid and
+ * curdata set, and it failed. We retried without those bits, and
+ * it succeeded. Suggest to the user that he set a quirk, so we
+ * don't go through the retry process the first time in the future.
+ * This should only happen on changers that claim SCSI-3 or higher,
+ * but don't support these bits.
+ */
+ if ((try_no_dvcid != 0)
+ && (error == 0))
+ softc->quirks |= CH_Q_NO_DVCID;
+
if (error)
goto done;
cam_periph_unlock(periph);
@@ -1284,8 +1342,8 @@ chgetelemstatus(struct cam_periph *perip
/* voltag */ want_voltags,
/* sea */ softc->sc_firsts[chet]
+ cesr->cesr_element_base,
- /* dvcid */ 1,
- /* curdata */ 1,
+ /* dvcid */ dvcid,
+ /* curdata */ curdata,
/* count */ cesr->cesr_element_count,
/* data_ptr */ data,
/* dxfer_len */ size,
More information about the svn-src-all
mailing list