svn commit: r259546 - head/sys/dev/usb/wlan
Kevin Lo
kevlo at FreeBSD.org
Wed Dec 18 08:39:13 UTC 2013
Author: kevlo
Date: Wed Dec 18 08:39:12 2013
New Revision: 259546
URL: http://svnweb.freebsd.org/changeset/base/259546
Log:
Fix style: add tab after #define.
Modified:
head/sys/dev/usb/wlan/if_run.c
head/sys/dev/usb/wlan/if_runreg.h
head/sys/dev/usb/wlan/if_runvar.h
Modified: head/sys/dev/usb/wlan/if_run.c
==============================================================================
--- head/sys/dev/usb/wlan/if_run.c Wed Dec 18 07:47:50 2013 (r259545)
+++ head/sys/dev/usb/wlan/if_run.c Wed Dec 18 08:39:12 2013 (r259546)
@@ -70,14 +70,14 @@ __FBSDID("$FreeBSD$");
#include <dev/usb/usbdi.h>
#include "usbdevs.h"
-#define USB_DEBUG_VAR run_debug
+#define USB_DEBUG_VAR run_debug
#include <dev/usb/usb_debug.h>
#include <dev/usb/wlan/if_runreg.h>
#include <dev/usb/wlan/if_runvar.h>
#ifdef USB_DEBUG
-#define RUN_DEBUG
+#define RUN_DEBUG
#endif
#ifdef RUN_DEBUG
@@ -87,17 +87,17 @@ SYSCTL_INT(_hw_usb_run, OID_AUTO, debug,
"run debug level");
#endif
-#define IEEE80211_HAS_ADDR4(wh) \
+#define IEEE80211_HAS_ADDR4(wh) \
(((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS)
/*
* Because of LOR in run_key_delete(), use atomic instead.
* '& RUN_CMDQ_MASQ' is to loop cmdq[].
*/
-#define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ)
+#define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ)
static const STRUCT_USB_HOST_ID run_devs[] = {
-#define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
+#define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
RUN_DEV(ABOCOM, RT2770),
RUN_DEV(ABOCOM, RT2870),
RUN_DEV(ABOCOM, RT3070),
@@ -4772,8 +4772,8 @@ run_enable_tsf_sync(struct run_softc *sc
static void
run_enable_mrr(struct run_softc *sc)
{
-#define CCK(mcs) (mcs)
-#define OFDM(mcs) (1 << 3 | (mcs))
+#define CCK(mcs) (mcs)
+#define OFDM(mcs) (1 << 3 | (mcs))
run_write(sc, RT2860_LG_FBK_CFG0,
OFDM(6) << 28 | /* 54->48 */
OFDM(5) << 24 | /* 48->36 */
Modified: head/sys/dev/usb/wlan/if_runreg.h
==============================================================================
--- head/sys/dev/usb/wlan/if_runreg.h Wed Dec 18 07:47:50 2013 (r259545)
+++ head/sys/dev/usb/wlan/if_runreg.h Wed Dec 18 08:39:12 2013 (r259546)
@@ -22,689 +22,687 @@
#ifndef _IF_RUNREG_H_
#define _IF_RUNREG_H_
-#define RT2860_CONFIG_NO 1
-#define RT2860_IFACE_INDEX 0
+#define RT2860_CONFIG_NO 1
+#define RT2860_IFACE_INDEX 0
-#define RT3070_OPT_14 0x0114
+#define RT3070_OPT_14 0x0114
/* SCH/DMA registers */
-#define RT2860_INT_STATUS 0x0200
-#define RT2860_INT_MASK 0x0204
-#define RT2860_WPDMA_GLO_CFG 0x0208
-#define RT2860_WPDMA_RST_IDX 0x020c
-#define RT2860_DELAY_INT_CFG 0x0210
-#define RT2860_WMM_AIFSN_CFG 0x0214
-#define RT2860_WMM_CWMIN_CFG 0x0218
-#define RT2860_WMM_CWMAX_CFG 0x021c
-#define RT2860_WMM_TXOP0_CFG 0x0220
-#define RT2860_WMM_TXOP1_CFG 0x0224
-#define RT2860_GPIO_CTRL 0x0228
-#define RT2860_MCU_CMD_REG 0x022c
-#define RT2860_TX_BASE_PTR(qid) (0x0230 + (qid) * 16)
-#define RT2860_TX_MAX_CNT(qid) (0x0234 + (qid) * 16)
-#define RT2860_TX_CTX_IDX(qid) (0x0238 + (qid) * 16)
-#define RT2860_TX_DTX_IDX(qid) (0x023c + (qid) * 16)
-#define RT2860_RX_BASE_PTR 0x0290
-#define RT2860_RX_MAX_CNT 0x0294
-#define RT2860_RX_CALC_IDX 0x0298
-#define RT2860_FS_DRX_IDX 0x029c
-#define RT2860_USB_DMA_CFG 0x02a0 /* RT2870 only */
-#define RT2860_US_CYC_CNT 0x02a4
+#define RT2860_INT_STATUS 0x0200
+#define RT2860_INT_MASK 0x0204
+#define RT2860_WPDMA_GLO_CFG 0x0208
+#define RT2860_WPDMA_RST_IDX 0x020c
+#define RT2860_DELAY_INT_CFG 0x0210
+#define RT2860_WMM_AIFSN_CFG 0x0214
+#define RT2860_WMM_CWMIN_CFG 0x0218
+#define RT2860_WMM_CWMAX_CFG 0x021c
+#define RT2860_WMM_TXOP0_CFG 0x0220
+#define RT2860_WMM_TXOP1_CFG 0x0224
+#define RT2860_GPIO_CTRL 0x0228
+#define RT2860_MCU_CMD_REG 0x022c
+#define RT2860_TX_BASE_PTR(qid) (0x0230 + (qid) * 16)
+#define RT2860_TX_MAX_CNT(qid) (0x0234 + (qid) * 16)
+#define RT2860_TX_CTX_IDX(qid) (0x0238 + (qid) * 16)
+#define RT2860_TX_DTX_IDX(qid) (0x023c + (qid) * 16)
+#define RT2860_RX_BASE_PTR 0x0290
+#define RT2860_RX_MAX_CNT 0x0294
+#define RT2860_RX_CALC_IDX 0x0298
+#define RT2860_FS_DRX_IDX 0x029c
+#define RT2860_USB_DMA_CFG 0x02a0 /* RT2870 only */
+#define RT2860_US_CYC_CNT 0x02a4
/* PBF registers */
-#define RT2860_SYS_CTRL 0x0400
-#define RT2860_HOST_CMD 0x0404
-#define RT2860_PBF_CFG 0x0408
-#define RT2860_MAX_PCNT 0x040c
-#define RT2860_BUF_CTRL 0x0410
-#define RT2860_MCU_INT_STA 0x0414
-#define RT2860_MCU_INT_ENA 0x0418
-#define RT2860_TXQ_IO(qid) (0x041c + (qid) * 4)
-#define RT2860_RX0Q_IO 0x0424
-#define RT2860_BCN_OFFSET0 0x042c
-#define RT2860_BCN_OFFSET1 0x0430
-#define RT2860_TXRXQ_STA 0x0434
-#define RT2860_TXRXQ_PCNT 0x0438
-#define RT2860_PBF_DBG 0x043c
-#define RT2860_CAP_CTRL 0x0440
+#define RT2860_SYS_CTRL 0x0400
+#define RT2860_HOST_CMD 0x0404
+#define RT2860_PBF_CFG 0x0408
+#define RT2860_MAX_PCNT 0x040c
+#define RT2860_BUF_CTRL 0x0410
+#define RT2860_MCU_INT_STA 0x0414
+#define RT2860_MCU_INT_ENA 0x0418
+#define RT2860_TXQ_IO(qid) (0x041c + (qid) * 4)
+#define RT2860_RX0Q_IO 0x0424
+#define RT2860_BCN_OFFSET0 0x042c
+#define RT2860_BCN_OFFSET1 0x0430
+#define RT2860_TXRXQ_STA 0x0434
+#define RT2860_TXRXQ_PCNT 0x0438
+#define RT2860_PBF_DBG 0x043c
+#define RT2860_CAP_CTRL 0x0440
/* RT3070 registers */
-#define RT3070_RF_CSR_CFG 0x0500
-#define RT3070_EFUSE_CTRL 0x0580
-#define RT3070_EFUSE_DATA0 0x0590
-#define RT3070_EFUSE_DATA1 0x0594
-#define RT3070_EFUSE_DATA2 0x0598
-#define RT3070_EFUSE_DATA3 0x059c
-#define RT3070_LDO_CFG0 0x05d4
-#define RT3070_GPIO_SWITCH 0x05dc
+#define RT3070_RF_CSR_CFG 0x0500
+#define RT3070_EFUSE_CTRL 0x0580
+#define RT3070_EFUSE_DATA0 0x0590
+#define RT3070_EFUSE_DATA1 0x0594
+#define RT3070_EFUSE_DATA2 0x0598
+#define RT3070_EFUSE_DATA3 0x059c
+#define RT3070_LDO_CFG0 0x05d4
+#define RT3070_GPIO_SWITCH 0x05dc
/* RT5592 registers */
-#define RT5592_DEBUG_INDEX 0x05e8
+#define RT5592_DEBUG_INDEX 0x05e8
/* MAC registers */
-#define RT2860_ASIC_VER_ID 0x1000
-#define RT2860_MAC_SYS_CTRL 0x1004
-#define RT2860_MAC_ADDR_DW0 0x1008
-#define RT2860_MAC_ADDR_DW1 0x100c
-#define RT2860_MAC_BSSID_DW0 0x1010
-#define RT2860_MAC_BSSID_DW1 0x1014
-#define RT2860_MAX_LEN_CFG 0x1018
-#define RT2860_BBP_CSR_CFG 0x101c
-#define RT2860_RF_CSR_CFG0 0x1020
-#define RT2860_RF_CSR_CFG1 0x1024
-#define RT2860_RF_CSR_CFG2 0x1028
-#define RT2860_LED_CFG 0x102c
+#define RT2860_ASIC_VER_ID 0x1000
+#define RT2860_MAC_SYS_CTRL 0x1004
+#define RT2860_MAC_ADDR_DW0 0x1008
+#define RT2860_MAC_ADDR_DW1 0x100c
+#define RT2860_MAC_BSSID_DW0 0x1010
+#define RT2860_MAC_BSSID_DW1 0x1014
+#define RT2860_MAX_LEN_CFG 0x1018
+#define RT2860_BBP_CSR_CFG 0x101c
+#define RT2860_RF_CSR_CFG0 0x1020
+#define RT2860_RF_CSR_CFG1 0x1024
+#define RT2860_RF_CSR_CFG2 0x1028
+#define RT2860_LED_CFG 0x102c
/* undocumented registers */
-#define RT2860_DEBUG 0x10f4
+#define RT2860_DEBUG 0x10f4
/* MAC Timing control registers */
-#define RT2860_XIFS_TIME_CFG 0x1100
-#define RT2860_BKOFF_SLOT_CFG 0x1104
-#define RT2860_NAV_TIME_CFG 0x1108
-#define RT2860_CH_TIME_CFG 0x110c
-#define RT2860_PBF_LIFE_TIMER 0x1110
-#define RT2860_BCN_TIME_CFG 0x1114
-#define RT2860_TBTT_SYNC_CFG 0x1118
-#define RT2860_TSF_TIMER_DW0 0x111c
-#define RT2860_TSF_TIMER_DW1 0x1120
-#define RT2860_TBTT_TIMER 0x1124
-#define RT2860_INT_TIMER_CFG 0x1128
-#define RT2860_INT_TIMER_EN 0x112c
-#define RT2860_CH_IDLE_TIME 0x1130
+#define RT2860_XIFS_TIME_CFG 0x1100
+#define RT2860_BKOFF_SLOT_CFG 0x1104
+#define RT2860_NAV_TIME_CFG 0x1108
+#define RT2860_CH_TIME_CFG 0x110c
+#define RT2860_PBF_LIFE_TIMER 0x1110
+#define RT2860_BCN_TIME_CFG 0x1114
+#define RT2860_TBTT_SYNC_CFG 0x1118
+#define RT2860_TSF_TIMER_DW0 0x111c
+#define RT2860_TSF_TIMER_DW1 0x1120
+#define RT2860_TBTT_TIMER 0x1124
+#define RT2860_INT_TIMER_CFG 0x1128
+#define RT2860_INT_TIMER_EN 0x112c
+#define RT2860_CH_IDLE_TIME 0x1130
/* MAC Power Save configuration registers */
-#define RT2860_MAC_STATUS_REG 0x1200
-#define RT2860_PWR_PIN_CFG 0x1204
-#define RT2860_AUTO_WAKEUP_CFG 0x1208
+#define RT2860_MAC_STATUS_REG 0x1200
+#define RT2860_PWR_PIN_CFG 0x1204
+#define RT2860_AUTO_WAKEUP_CFG 0x1208
/* MAC TX configuration registers */
-#define RT2860_EDCA_AC_CFG(aci) (0x1300 + (aci) * 4)
-#define RT2860_EDCA_TID_AC_MAP 0x1310
-#define RT2860_TX_PWR_CFG(ridx) (0x1314 + (ridx) * 4)
-#define RT2860_TX_PIN_CFG 0x1328
-#define RT2860_TX_BAND_CFG 0x132c
-#define RT2860_TX_SW_CFG0 0x1330
-#define RT2860_TX_SW_CFG1 0x1334
-#define RT2860_TX_SW_CFG2 0x1338
-#define RT2860_TXOP_THRES_CFG 0x133c
-#define RT2860_TXOP_CTRL_CFG 0x1340
-#define RT2860_TX_RTS_CFG 0x1344
-#define RT2860_TX_TIMEOUT_CFG 0x1348
-#define RT2860_TX_RTY_CFG 0x134c
-#define RT2860_TX_LINK_CFG 0x1350
-#define RT2860_HT_FBK_CFG0 0x1354
-#define RT2860_HT_FBK_CFG1 0x1358
-#define RT2860_LG_FBK_CFG0 0x135c
-#define RT2860_LG_FBK_CFG1 0x1360
-#define RT2860_CCK_PROT_CFG 0x1364
-#define RT2860_OFDM_PROT_CFG 0x1368
-#define RT2860_MM20_PROT_CFG 0x136c
-#define RT2860_MM40_PROT_CFG 0x1370
-#define RT2860_GF20_PROT_CFG 0x1374
-#define RT2860_GF40_PROT_CFG 0x1378
-#define RT2860_EXP_CTS_TIME 0x137c
-#define RT2860_EXP_ACK_TIME 0x1380
+#define RT2860_EDCA_AC_CFG(aci) (0x1300 + (aci) * 4)
+#define RT2860_EDCA_TID_AC_MAP 0x1310
+#define RT2860_TX_PWR_CFG(ridx) (0x1314 + (ridx) * 4)
+#define RT2860_TX_PIN_CFG 0x1328
+#define RT2860_TX_BAND_CFG 0x132c
+#define RT2860_TX_SW_CFG0 0x1330
+#define RT2860_TX_SW_CFG1 0x1334
+#define RT2860_TX_SW_CFG2 0x1338
+#define RT2860_TXOP_THRES_CFG 0x133c
+#define RT2860_TXOP_CTRL_CFG 0x1340
+#define RT2860_TX_RTS_CFG 0x1344
+#define RT2860_TX_TIMEOUT_CFG 0x1348
+#define RT2860_TX_RTY_CFG 0x134c
+#define RT2860_TX_LINK_CFG 0x1350
+#define RT2860_HT_FBK_CFG0 0x1354
+#define RT2860_HT_FBK_CFG1 0x1358
+#define RT2860_LG_FBK_CFG0 0x135c
+#define RT2860_LG_FBK_CFG1 0x1360
+#define RT2860_CCK_PROT_CFG 0x1364
+#define RT2860_OFDM_PROT_CFG 0x1368
+#define RT2860_MM20_PROT_CFG 0x136c
+#define RT2860_MM40_PROT_CFG 0x1370
+#define RT2860_GF20_PROT_CFG 0x1374
+#define RT2860_GF40_PROT_CFG 0x1378
+#define RT2860_EXP_CTS_TIME 0x137c
+#define RT2860_EXP_ACK_TIME 0x1380
/* MAC RX configuration registers */
-#define RT2860_RX_FILTR_CFG 0x1400
-#define RT2860_AUTO_RSP_CFG 0x1404
-#define RT2860_LEGACY_BASIC_RATE 0x1408
-#define RT2860_HT_BASIC_RATE 0x140c
-#define RT2860_HT_CTRL_CFG 0x1410
-#define RT2860_SIFS_COST_CFG 0x1414
-#define RT2860_RX_PARSER_CFG 0x1418
+#define RT2860_RX_FILTR_CFG 0x1400
+#define RT2860_AUTO_RSP_CFG 0x1404
+#define RT2860_LEGACY_BASIC_RATE 0x1408
+#define RT2860_HT_BASIC_RATE 0x140c
+#define RT2860_HT_CTRL_CFG 0x1410
+#define RT2860_SIFS_COST_CFG 0x1414
+#define RT2860_RX_PARSER_CFG 0x1418
/* MAC Security configuration registers */
-#define RT2860_TX_SEC_CNT0 0x1500
-#define RT2860_RX_SEC_CNT0 0x1504
-#define RT2860_CCMP_FC_MUTE 0x1508
+#define RT2860_TX_SEC_CNT0 0x1500
+#define RT2860_RX_SEC_CNT0 0x1504
+#define RT2860_CCMP_FC_MUTE 0x1508
/* MAC HCCA/PSMP configuration registers */
-#define RT2860_TXOP_HLDR_ADDR0 0x1600
-#define RT2860_TXOP_HLDR_ADDR1 0x1604
-#define RT2860_TXOP_HLDR_ET 0x1608
-#define RT2860_QOS_CFPOLL_RA_DW0 0x160c
-#define RT2860_QOS_CFPOLL_A1_DW1 0x1610
-#define RT2860_QOS_CFPOLL_QC 0x1614
+#define RT2860_TXOP_HLDR_ADDR0 0x1600
+#define RT2860_TXOP_HLDR_ADDR1 0x1604
+#define RT2860_TXOP_HLDR_ET 0x1608
+#define RT2860_QOS_CFPOLL_RA_DW0 0x160c
+#define RT2860_QOS_CFPOLL_A1_DW1 0x1610
+#define RT2860_QOS_CFPOLL_QC 0x1614
/* MAC Statistics Counters */
-#define RT2860_RX_STA_CNT0 0x1700
-#define RT2860_RX_STA_CNT1 0x1704
-#define RT2860_RX_STA_CNT2 0x1708
-#define RT2860_TX_STA_CNT0 0x170c
-#define RT2860_TX_STA_CNT1 0x1710
-#define RT2860_TX_STA_CNT2 0x1714
-#define RT2860_TX_STAT_FIFO 0x1718
+#define RT2860_RX_STA_CNT0 0x1700
+#define RT2860_RX_STA_CNT1 0x1704
+#define RT2860_RX_STA_CNT2 0x1708
+#define RT2860_TX_STA_CNT0 0x170c
+#define RT2860_TX_STA_CNT1 0x1710
+#define RT2860_TX_STA_CNT2 0x1714
+#define RT2860_TX_STAT_FIFO 0x1718
/* RX WCID search table */
-#define RT2860_WCID_ENTRY(wcid) (0x1800 + (wcid) * 8)
+#define RT2860_WCID_ENTRY(wcid) (0x1800 + (wcid) * 8)
-#define RT2860_FW_BASE 0x2000
-#define RT2870_FW_BASE 0x3000
+#define RT2860_FW_BASE 0x2000
+#define RT2870_FW_BASE 0x3000
/* Pair-wise key table */
-#define RT2860_PKEY(wcid) (0x4000 + (wcid) * 32)
+#define RT2860_PKEY(wcid) (0x4000 + (wcid) * 32)
/* IV/EIV table */
-#define RT2860_IVEIV(wcid) (0x6000 + (wcid) * 8)
+#define RT2860_IVEIV(wcid) (0x6000 + (wcid) * 8)
/* WCID attribute table */
-#define RT2860_WCID_ATTR(wcid) (0x6800 + (wcid) * 4)
+#define RT2860_WCID_ATTR(wcid) (0x6800 + (wcid) * 4)
/* Shared Key Table */
-#define RT2860_SKEY(vap, kidx) (0x6c00 + (vap) * 128 + (kidx) * 32)
+#define RT2860_SKEY(vap, kidx) (0x6c00 + (vap) * 128 + (kidx) * 32)
/* Shared Key Mode */
-#define RT2860_SKEY_MODE_0_7 0x7000
-#define RT2860_SKEY_MODE_8_15 0x7004
-#define RT2860_SKEY_MODE_16_23 0x7008
-#define RT2860_SKEY_MODE_24_31 0x700c
+#define RT2860_SKEY_MODE_0_7 0x7000
+#define RT2860_SKEY_MODE_8_15 0x7004
+#define RT2860_SKEY_MODE_16_23 0x7008
+#define RT2860_SKEY_MODE_24_31 0x700c
/* Shared Memory between MCU and host */
-#define RT2860_H2M_MAILBOX 0x7010
-#define RT2860_H2M_MAILBOX_CID 0x7014
-#define RT2860_H2M_MAILBOX_STATUS 0x701c
-#define RT2860_H2M_INTSRC 0x7024
-#define RT2860_H2M_BBPAGENT 0x7028
-#define RT2860_BCN_BASE(vap) (0x7800 + (vap) * 512)
+#define RT2860_H2M_MAILBOX 0x7010
+#define RT2860_H2M_MAILBOX_CID 0x7014
+#define RT2860_H2M_MAILBOX_STATUS 0x701c
+#define RT2860_H2M_INTSRC 0x7024
+#define RT2860_H2M_BBPAGENT 0x7028
+#define RT2860_BCN_BASE(vap) (0x7800 + (vap) * 512)
/* possible flags for register RT2860_PCI_EECTRL */
-#define RT2860_C (1 << 0)
-#define RT2860_S (1 << 1)
-#define RT2860_D (1 << 2)
-#define RT2860_SHIFT_D 2
-#define RT2860_Q (1 << 3)
-#define RT2860_SHIFT_Q 3
+#define RT2860_C (1 << 0)
+#define RT2860_S (1 << 1)
+#define RT2860_D (1 << 2)
+#define RT2860_SHIFT_D 2
+#define RT2860_Q (1 << 3)
+#define RT2860_SHIFT_Q 3
/* possible flags for registers INT_STATUS/INT_MASK */
-#define RT2860_TX_COHERENT (1 << 17)
-#define RT2860_RX_COHERENT (1 << 16)
-#define RT2860_MAC_INT_4 (1 << 15)
-#define RT2860_MAC_INT_3 (1 << 14)
-#define RT2860_MAC_INT_2 (1 << 13)
-#define RT2860_MAC_INT_1 (1 << 12)
-#define RT2860_MAC_INT_0 (1 << 11)
-#define RT2860_TX_RX_COHERENT (1 << 10)
-#define RT2860_MCU_CMD_INT (1 << 9)
-#define RT2860_TX_DONE_INT5 (1 << 8)
-#define RT2860_TX_DONE_INT4 (1 << 7)
-#define RT2860_TX_DONE_INT3 (1 << 6)
-#define RT2860_TX_DONE_INT2 (1 << 5)
-#define RT2860_TX_DONE_INT1 (1 << 4)
-#define RT2860_TX_DONE_INT0 (1 << 3)
-#define RT2860_RX_DONE_INT (1 << 2)
-#define RT2860_TX_DLY_INT (1 << 1)
-#define RT2860_RX_DLY_INT (1 << 0)
+#define RT2860_TX_COHERENT (1 << 17)
+#define RT2860_RX_COHERENT (1 << 16)
+#define RT2860_MAC_INT_4 (1 << 15)
+#define RT2860_MAC_INT_3 (1 << 14)
+#define RT2860_MAC_INT_2 (1 << 13)
+#define RT2860_MAC_INT_1 (1 << 12)
+#define RT2860_MAC_INT_0 (1 << 11)
+#define RT2860_TX_RX_COHERENT (1 << 10)
+#define RT2860_MCU_CMD_INT (1 << 9)
+#define RT2860_TX_DONE_INT5 (1 << 8)
+#define RT2860_TX_DONE_INT4 (1 << 7)
+#define RT2860_TX_DONE_INT3 (1 << 6)
+#define RT2860_TX_DONE_INT2 (1 << 5)
+#define RT2860_TX_DONE_INT1 (1 << 4)
+#define RT2860_TX_DONE_INT0 (1 << 3)
+#define RT2860_RX_DONE_INT (1 << 2)
+#define RT2860_TX_DLY_INT (1 << 1)
+#define RT2860_RX_DLY_INT (1 << 0)
/* possible flags for register WPDMA_GLO_CFG */
-#define RT2860_HDR_SEG_LEN_SHIFT 8
-#define RT2860_BIG_ENDIAN (1 << 7)
-#define RT2860_TX_WB_DDONE (1 << 6)
-#define RT2860_WPDMA_BT_SIZE_SHIFT 4
-#define RT2860_WPDMA_BT_SIZE16 0
-#define RT2860_WPDMA_BT_SIZE32 1
-#define RT2860_WPDMA_BT_SIZE64 2
-#define RT2860_WPDMA_BT_SIZE128 3
-#define RT2860_RX_DMA_BUSY (1 << 3)
-#define RT2860_RX_DMA_EN (1 << 2)
-#define RT2860_TX_DMA_BUSY (1 << 1)
-#define RT2860_TX_DMA_EN (1 << 0)
+#define RT2860_HDR_SEG_LEN_SHIFT 8
+#define RT2860_BIG_ENDIAN (1 << 7)
+#define RT2860_TX_WB_DDONE (1 << 6)
+#define RT2860_WPDMA_BT_SIZE_SHIFT 4
+#define RT2860_WPDMA_BT_SIZE16 0
+#define RT2860_WPDMA_BT_SIZE32 1
+#define RT2860_WPDMA_BT_SIZE64 2
+#define RT2860_WPDMA_BT_SIZE128 3
+#define RT2860_RX_DMA_BUSY (1 << 3)
+#define RT2860_RX_DMA_EN (1 << 2)
+#define RT2860_TX_DMA_BUSY (1 << 1)
+#define RT2860_TX_DMA_EN (1 << 0)
/* possible flags for register DELAY_INT_CFG */
-#define RT2860_TXDLY_INT_EN (1U << 31)
-#define RT2860_TXMAX_PINT_SHIFT 24
-#define RT2860_TXMAX_PTIME_SHIFT 16
-#define RT2860_RXDLY_INT_EN (1 << 15)
-#define RT2860_RXMAX_PINT_SHIFT 8
-#define RT2860_RXMAX_PTIME_SHIFT 0
+#define RT2860_TXDLY_INT_EN (1U << 31)
+#define RT2860_TXMAX_PINT_SHIFT 24
+#define RT2860_TXMAX_PTIME_SHIFT 16
+#define RT2860_RXDLY_INT_EN (1 << 15)
+#define RT2860_RXMAX_PINT_SHIFT 8
+#define RT2860_RXMAX_PTIME_SHIFT 0
/* possible flags for register GPIO_CTRL */
-#define RT2860_GPIO_D_SHIFT 8
-#define RT2860_GPIO_O_SHIFT 0
+#define RT2860_GPIO_D_SHIFT 8
+#define RT2860_GPIO_O_SHIFT 0
/* possible flags for register USB_DMA_CFG */
-#define RT2860_USB_TX_BUSY (1U << 31)
-#define RT2860_USB_RX_BUSY (1 << 30)
-#define RT2860_USB_EPOUT_VLD_SHIFT 24
-#define RT2860_USB_TX_EN (1 << 23)
-#define RT2860_USB_RX_EN (1 << 22)
-#define RT2860_USB_RX_AGG_EN (1 << 21)
-#define RT2860_USB_TXOP_HALT (1 << 20)
-#define RT2860_USB_TX_CLEAR (1 << 19)
-#define RT2860_USB_PHY_WD_EN (1 << 16)
-#define RT2860_USB_PHY_MAN_RST (1 << 15)
-#define RT2860_USB_RX_AGG_LMT(x) ((x) << 8) /* in unit of 1KB */
-#define RT2860_USB_RX_AGG_TO(x) ((x) & 0xff) /* in unit of 33ns */
+#define RT2860_USB_TX_BUSY (1U << 31)
+#define RT2860_USB_RX_BUSY (1 << 30)
+#define RT2860_USB_EPOUT_VLD_SHIFT 24
+#define RT2860_USB_TX_EN (1 << 23)
+#define RT2860_USB_RX_EN (1 << 22)
+#define RT2860_USB_RX_AGG_EN (1 << 21)
+#define RT2860_USB_TXOP_HALT (1 << 20)
+#define RT2860_USB_TX_CLEAR (1 << 19)
+#define RT2860_USB_PHY_WD_EN (1 << 16)
+#define RT2860_USB_PHY_MAN_RST (1 << 15)
+#define RT2860_USB_RX_AGG_LMT(x) ((x) << 8) /* in unit of 1KB */
+#define RT2860_USB_RX_AGG_TO(x) ((x) & 0xff) /* in unit of 33ns */
/* possible flags for register US_CYC_CNT */
-#define RT2860_TEST_EN (1 << 24)
-#define RT2860_TEST_SEL_SHIFT 16
-#define RT2860_BT_MODE_EN (1 << 8)
-#define RT2860_US_CYC_CNT_SHIFT 0
+#define RT2860_TEST_EN (1 << 24)
+#define RT2860_TEST_SEL_SHIFT 16
+#define RT2860_BT_MODE_EN (1 << 8)
+#define RT2860_US_CYC_CNT_SHIFT 0
/* possible flags for register SYS_CTRL */
-#define RT2860_HST_PM_SEL (1 << 16)
-#define RT2860_CAP_MODE (1 << 14)
-#define RT2860_PME_OEN (1 << 13)
-#define RT2860_CLKSELECT (1 << 12)
-#define RT2860_PBF_CLK_EN (1 << 11)
-#define RT2860_MAC_CLK_EN (1 << 10)
-#define RT2860_DMA_CLK_EN (1 << 9)
-#define RT2860_MCU_READY (1 << 7)
-#define RT2860_ASY_RESET (1 << 4)
-#define RT2860_PBF_RESET (1 << 3)
-#define RT2860_MAC_RESET (1 << 2)
-#define RT2860_DMA_RESET (1 << 1)
-#define RT2860_MCU_RESET (1 << 0)
+#define RT2860_HST_PM_SEL (1 << 16)
+#define RT2860_CAP_MODE (1 << 14)
+#define RT2860_PME_OEN (1 << 13)
+#define RT2860_CLKSELECT (1 << 12)
+#define RT2860_PBF_CLK_EN (1 << 11)
+#define RT2860_MAC_CLK_EN (1 << 10)
+#define RT2860_DMA_CLK_EN (1 << 9)
+#define RT2860_MCU_READY (1 << 7)
+#define RT2860_ASY_RESET (1 << 4)
+#define RT2860_PBF_RESET (1 << 3)
+#define RT2860_MAC_RESET (1 << 2)
+#define RT2860_DMA_RESET (1 << 1)
+#define RT2860_MCU_RESET (1 << 0)
/* possible values for register HOST_CMD */
-#define RT2860_MCU_CMD_SLEEP 0x30
-#define RT2860_MCU_CMD_WAKEUP 0x31
-#define RT2860_MCU_CMD_LEDS 0x50
-#define RT2860_MCU_CMD_LED_RSSI 0x51
-#define RT2860_MCU_CMD_LED1 0x52
-#define RT2860_MCU_CMD_LED2 0x53
-#define RT2860_MCU_CMD_LED3 0x54
-#define RT2860_MCU_CMD_RFRESET 0x72
-#define RT2860_MCU_CMD_ANTSEL 0x73
-#define RT2860_MCU_CMD_BBP 0x80
-#define RT2860_MCU_CMD_PSLEVEL 0x83
+#define RT2860_MCU_CMD_SLEEP 0x30
+#define RT2860_MCU_CMD_WAKEUP 0x31
+#define RT2860_MCU_CMD_LEDS 0x50
+#define RT2860_MCU_CMD_LED_RSSI 0x51
+#define RT2860_MCU_CMD_LED1 0x52
+#define RT2860_MCU_CMD_LED2 0x53
+#define RT2860_MCU_CMD_LED3 0x54
+#define RT2860_MCU_CMD_RFRESET 0x72
+#define RT2860_MCU_CMD_ANTSEL 0x73
+#define RT2860_MCU_CMD_BBP 0x80
+#define RT2860_MCU_CMD_PSLEVEL 0x83
/* possible flags for register PBF_CFG */
-#define RT2860_TX1Q_NUM_SHIFT 21
-#define RT2860_TX2Q_NUM_SHIFT 16
-#define RT2860_NULL0_MODE (1 << 15)
-#define RT2860_NULL1_MODE (1 << 14)
-#define RT2860_RX_DROP_MODE (1 << 13)
-#define RT2860_TX0Q_MANUAL (1 << 12)
-#define RT2860_TX1Q_MANUAL (1 << 11)
-#define RT2860_TX2Q_MANUAL (1 << 10)
-#define RT2860_RX0Q_MANUAL (1 << 9)
-#define RT2860_HCCA_EN (1 << 8)
-#define RT2860_TX0Q_EN (1 << 4)
-#define RT2860_TX1Q_EN (1 << 3)
-#define RT2860_TX2Q_EN (1 << 2)
-#define RT2860_RX0Q_EN (1 << 1)
+#define RT2860_TX1Q_NUM_SHIFT 21
+#define RT2860_TX2Q_NUM_SHIFT 16
+#define RT2860_NULL0_MODE (1 << 15)
+#define RT2860_NULL1_MODE (1 << 14)
+#define RT2860_RX_DROP_MODE (1 << 13)
+#define RT2860_TX0Q_MANUAL (1 << 12)
+#define RT2860_TX1Q_MANUAL (1 << 11)
+#define RT2860_TX2Q_MANUAL (1 << 10)
+#define RT2860_RX0Q_MANUAL (1 << 9)
+#define RT2860_HCCA_EN (1 << 8)
+#define RT2860_TX0Q_EN (1 << 4)
+#define RT2860_TX1Q_EN (1 << 3)
+#define RT2860_TX2Q_EN (1 << 2)
+#define RT2860_RX0Q_EN (1 << 1)
/* possible flags for register BUF_CTRL */
-#define RT2860_WRITE_TXQ(qid) (1 << (11 - (qid)))
-#define RT2860_NULL0_KICK (1 << 7)
-#define RT2860_NULL1_KICK (1 << 6)
-#define RT2860_BUF_RESET (1 << 5)
-#define RT2860_READ_TXQ(qid) (1 << (3 - (qid))
-#define RT2860_READ_RX0Q (1 << 0)
+#define RT2860_WRITE_TXQ(qid) (1 << (11 - (qid)))
+#define RT2860_NULL0_KICK (1 << 7)
+#define RT2860_NULL1_KICK (1 << 6)
+#define RT2860_BUF_RESET (1 << 5)
+#define RT2860_READ_TXQ(qid) (1 << (3 - (qid))
+#define RT2860_READ_RX0Q (1 << 0)
/* possible flags for registers MCU_INT_STA/MCU_INT_ENA */
-#define RT2860_MCU_MAC_INT_8 (1 << 24)
-#define RT2860_MCU_MAC_INT_7 (1 << 23)
-#define RT2860_MCU_MAC_INT_6 (1 << 22)
-#define RT2860_MCU_MAC_INT_4 (1 << 20)
-#define RT2860_MCU_MAC_INT_3 (1 << 19)
-#define RT2860_MCU_MAC_INT_2 (1 << 18)
-#define RT2860_MCU_MAC_INT_1 (1 << 17)
-#define RT2860_MCU_MAC_INT_0 (1 << 16)
-#define RT2860_DTX0_INT (1 << 11)
-#define RT2860_DTX1_INT (1 << 10)
-#define RT2860_DTX2_INT (1 << 9)
-#define RT2860_DRX0_INT (1 << 8)
-#define RT2860_HCMD_INT (1 << 7)
-#define RT2860_N0TX_INT (1 << 6)
-#define RT2860_N1TX_INT (1 << 5)
-#define RT2860_BCNTX_INT (1 << 4)
-#define RT2860_MTX0_INT (1 << 3)
-#define RT2860_MTX1_INT (1 << 2)
-#define RT2860_MTX2_INT (1 << 1)
-#define RT2860_MRX0_INT (1 << 0)
+#define RT2860_MCU_MAC_INT_8 (1 << 24)
+#define RT2860_MCU_MAC_INT_7 (1 << 23)
+#define RT2860_MCU_MAC_INT_6 (1 << 22)
+#define RT2860_MCU_MAC_INT_4 (1 << 20)
+#define RT2860_MCU_MAC_INT_3 (1 << 19)
+#define RT2860_MCU_MAC_INT_2 (1 << 18)
+#define RT2860_MCU_MAC_INT_1 (1 << 17)
+#define RT2860_MCU_MAC_INT_0 (1 << 16)
+#define RT2860_DTX0_INT (1 << 11)
+#define RT2860_DTX1_INT (1 << 10)
+#define RT2860_DTX2_INT (1 << 9)
+#define RT2860_DRX0_INT (1 << 8)
+#define RT2860_HCMD_INT (1 << 7)
+#define RT2860_N0TX_INT (1 << 6)
+#define RT2860_N1TX_INT (1 << 5)
+#define RT2860_BCNTX_INT (1 << 4)
+#define RT2860_MTX0_INT (1 << 3)
+#define RT2860_MTX1_INT (1 << 2)
+#define RT2860_MTX2_INT (1 << 1)
+#define RT2860_MRX0_INT (1 << 0)
/* possible flags for register TXRXQ_PCNT */
-#define RT2860_RX0Q_PCNT_MASK 0xff000000
-#define RT2860_TX2Q_PCNT_MASK 0x00ff0000
-#define RT2860_TX1Q_PCNT_MASK 0x0000ff00
-#define RT2860_TX0Q_PCNT_MASK 0x000000ff
+#define RT2860_RX0Q_PCNT_MASK 0xff000000
+#define RT2860_TX2Q_PCNT_MASK 0x00ff0000
+#define RT2860_TX1Q_PCNT_MASK 0x0000ff00
+#define RT2860_TX0Q_PCNT_MASK 0x000000ff
/* possible flags for register CAP_CTRL */
-#define RT2860_CAP_ADC_FEQ (1U << 31)
-#define RT2860_CAP_START (1 << 30)
-#define RT2860_MAN_TRIG (1 << 29)
-#define RT2860_TRIG_OFFSET_SHIFT 16
-#define RT2860_START_ADDR_SHIFT 0
+#define RT2860_CAP_ADC_FEQ (1U << 31)
+#define RT2860_CAP_START (1 << 30)
+#define RT2860_MAN_TRIG (1 << 29)
+#define RT2860_TRIG_OFFSET_SHIFT 16
+#define RT2860_START_ADDR_SHIFT 0
/* possible flags for register RF_CSR_CFG */
-#define RT3070_RF_KICK (1 << 17)
-#define RT3070_RF_WRITE (1 << 16)
+#define RT3070_RF_KICK (1 << 17)
+#define RT3070_RF_WRITE (1 << 16)
/* possible flags for register EFUSE_CTRL */
-#define RT3070_SEL_EFUSE (1U << 31)
-#define RT3070_EFSROM_KICK (1 << 30)
-#define RT3070_EFSROM_AIN_MASK 0x03ff0000
-#define RT3070_EFSROM_AIN_SHIFT 16
-#define RT3070_EFSROM_MODE_MASK 0x000000c0
-#define RT3070_EFUSE_AOUT_MASK 0x0000003f
+#define RT3070_SEL_EFUSE (1U << 31)
+#define RT3070_EFSROM_KICK (1 << 30)
+#define RT3070_EFSROM_AIN_MASK 0x03ff0000
+#define RT3070_EFSROM_AIN_SHIFT 16
+#define RT3070_EFSROM_MODE_MASK 0x000000c0
+#define RT3070_EFUSE_AOUT_MASK 0x0000003f
/* possible flag for register DEBUG_INDEX */
-#define RT5592_SEL_XTAL (1U << 31)
+#define RT5592_SEL_XTAL (1U << 31)
/* possible flags for register MAC_SYS_CTRL */
-#define RT2860_RX_TS_EN (1 << 7)
-#define RT2860_WLAN_HALT_EN (1 << 6)
-#define RT2860_PBF_LOOP_EN (1 << 5)
-#define RT2860_CONT_TX_TEST (1 << 4)
-#define RT2860_MAC_RX_EN (1 << 3)
-#define RT2860_MAC_TX_EN (1 << 2)
-#define RT2860_BBP_HRST (1 << 1)
-#define RT2860_MAC_SRST (1 << 0)
+#define RT2860_RX_TS_EN (1 << 7)
+#define RT2860_WLAN_HALT_EN (1 << 6)
+#define RT2860_PBF_LOOP_EN (1 << 5)
+#define RT2860_CONT_TX_TEST (1 << 4)
+#define RT2860_MAC_RX_EN (1 << 3)
+#define RT2860_MAC_TX_EN (1 << 2)
+#define RT2860_BBP_HRST (1 << 1)
+#define RT2860_MAC_SRST (1 << 0)
/* possible flags for register MAC_BSSID_DW1 */
-#define RT2860_MULTI_BCN_NUM_SHIFT 18
-#define RT2860_MULTI_BSSID_MODE_SHIFT 16
+#define RT2860_MULTI_BCN_NUM_SHIFT 18
+#define RT2860_MULTI_BSSID_MODE_SHIFT 16
/* possible flags for register MAX_LEN_CFG */
-#define RT2860_MIN_MPDU_LEN_SHIFT 16
-#define RT2860_MAX_PSDU_LEN_SHIFT 12
-#define RT2860_MAX_PSDU_LEN8K 0
-#define RT2860_MAX_PSDU_LEN16K 1
-#define RT2860_MAX_PSDU_LEN32K 2
-#define RT2860_MAX_PSDU_LEN64K 3
-#define RT2860_MAX_MPDU_LEN_SHIFT 0
+#define RT2860_MIN_MPDU_LEN_SHIFT 16
+#define RT2860_MAX_PSDU_LEN_SHIFT 12
+#define RT2860_MAX_PSDU_LEN8K 0
+#define RT2860_MAX_PSDU_LEN16K 1
+#define RT2860_MAX_PSDU_LEN32K 2
+#define RT2860_MAX_PSDU_LEN64K 3
+#define RT2860_MAX_MPDU_LEN_SHIFT 0
/* possible flags for registers BBP_CSR_CFG/H2M_BBPAGENT */
-#define RT2860_BBP_RW_PARALLEL (1 << 19)
-#define RT2860_BBP_PAR_DUR_112_5 (1 << 18)
-#define RT2860_BBP_CSR_KICK (1 << 17)
-#define RT2860_BBP_CSR_READ (1 << 16)
-#define RT2860_BBP_ADDR_SHIFT 8
-#define RT2860_BBP_DATA_SHIFT 0
+#define RT2860_BBP_RW_PARALLEL (1 << 19)
+#define RT2860_BBP_PAR_DUR_112_5 (1 << 18)
+#define RT2860_BBP_CSR_KICK (1 << 17)
+#define RT2860_BBP_CSR_READ (1 << 16)
+#define RT2860_BBP_ADDR_SHIFT 8
+#define RT2860_BBP_DATA_SHIFT 0
/* possible flags for register RF_CSR_CFG0 */
-#define RT2860_RF_REG_CTRL (1U << 31)
-#define RT2860_RF_LE_SEL1 (1 << 30)
-#define RT2860_RF_LE_STBY (1 << 29)
-#define RT2860_RF_REG_WIDTH_SHIFT 24
-#define RT2860_RF_REG_0_SHIFT 0
+#define RT2860_RF_REG_CTRL (1U << 31)
+#define RT2860_RF_LE_SEL1 (1 << 30)
+#define RT2860_RF_LE_STBY (1 << 29)
+#define RT2860_RF_REG_WIDTH_SHIFT 24
+#define RT2860_RF_REG_0_SHIFT 0
/* possible flags for register RF_CSR_CFG1 */
-#define RT2860_RF_DUR_5 (1 << 24)
-#define RT2860_RF_REG_1_SHIFT 0
+#define RT2860_RF_DUR_5 (1 << 24)
+#define RT2860_RF_REG_1_SHIFT 0
/* possible flags for register LED_CFG */
-#define RT2860_LED_POL (1 << 30)
-#define RT2860_Y_LED_MODE_SHIFT 28
-#define RT2860_G_LED_MODE_SHIFT 26
-#define RT2860_R_LED_MODE_SHIFT 24
-#define RT2860_LED_MODE_OFF 0
-#define RT2860_LED_MODE_BLINK_TX 1
-#define RT2860_LED_MODE_SLOW_BLINK 2
-#define RT2860_LED_MODE_ON 3
-#define RT2860_SLOW_BLK_TIME_SHIFT 16
-#define RT2860_LED_OFF_TIME_SHIFT 8
-#define RT2860_LED_ON_TIME_SHIFT 0
+#define RT2860_LED_POL (1 << 30)
+#define RT2860_Y_LED_MODE_SHIFT 28
+#define RT2860_G_LED_MODE_SHIFT 26
+#define RT2860_R_LED_MODE_SHIFT 24
+#define RT2860_LED_MODE_OFF 0
+#define RT2860_LED_MODE_BLINK_TX 1
+#define RT2860_LED_MODE_SLOW_BLINK 2
+#define RT2860_LED_MODE_ON 3
+#define RT2860_SLOW_BLK_TIME_SHIFT 16
+#define RT2860_LED_OFF_TIME_SHIFT 8
+#define RT2860_LED_ON_TIME_SHIFT 0
/* possible flags for register XIFS_TIME_CFG */
-#define RT2860_BB_RXEND_EN (1 << 29)
-#define RT2860_EIFS_TIME_SHIFT 20
-#define RT2860_OFDM_XIFS_TIME_SHIFT 16
-#define RT2860_OFDM_SIFS_TIME_SHIFT 8
-#define RT2860_CCK_SIFS_TIME_SHIFT 0
+#define RT2860_BB_RXEND_EN (1 << 29)
+#define RT2860_EIFS_TIME_SHIFT 20
+#define RT2860_OFDM_XIFS_TIME_SHIFT 16
+#define RT2860_OFDM_SIFS_TIME_SHIFT 8
+#define RT2860_CCK_SIFS_TIME_SHIFT 0
/* possible flags for register BKOFF_SLOT_CFG */
-#define RT2860_CC_DELAY_TIME_SHIFT 8
-#define RT2860_SLOT_TIME 0
+#define RT2860_CC_DELAY_TIME_SHIFT 8
+#define RT2860_SLOT_TIME 0
/* possible flags for register NAV_TIME_CFG */
-#define RT2860_NAV_UPD (1U << 31)
-#define RT2860_NAV_UPD_VAL_SHIFT 16
-#define RT2860_NAV_CLR_EN (1 << 15)
-#define RT2860_NAV_TIMER_SHIFT 0
+#define RT2860_NAV_UPD (1U << 31)
+#define RT2860_NAV_UPD_VAL_SHIFT 16
+#define RT2860_NAV_CLR_EN (1 << 15)
+#define RT2860_NAV_TIMER_SHIFT 0
/* possible flags for register CH_TIME_CFG */
-#define RT2860_EIFS_AS_CH_BUSY (1 << 4)
-#define RT2860_NAV_AS_CH_BUSY (1 << 3)
-#define RT2860_RX_AS_CH_BUSY (1 << 2)
-#define RT2860_TX_AS_CH_BUSY (1 << 1)
-#define RT2860_CH_STA_TIMER_EN (1 << 0)
+#define RT2860_EIFS_AS_CH_BUSY (1 << 4)
+#define RT2860_NAV_AS_CH_BUSY (1 << 3)
+#define RT2860_RX_AS_CH_BUSY (1 << 2)
+#define RT2860_TX_AS_CH_BUSY (1 << 1)
+#define RT2860_CH_STA_TIMER_EN (1 << 0)
/* possible values for register BCN_TIME_CFG */
-#define RT2860_TSF_INS_COMP_SHIFT 24
-#define RT2860_BCN_TX_EN (1 << 20)
-#define RT2860_TBTT_TIMER_EN (1 << 19)
-#define RT2860_TSF_SYNC_MODE_SHIFT 17
-#define RT2860_TSF_SYNC_MODE_DIS 0
-#define RT2860_TSF_SYNC_MODE_STA 1
-#define RT2860_TSF_SYNC_MODE_IBSS 2
-#define RT2860_TSF_SYNC_MODE_HOSTAP 3
-#define RT2860_TSF_TIMER_EN (1 << 16)
-#define RT2860_BCN_INTVAL_SHIFT 0
+#define RT2860_TSF_INS_COMP_SHIFT 24
+#define RT2860_BCN_TX_EN (1 << 20)
+#define RT2860_TBTT_TIMER_EN (1 << 19)
+#define RT2860_TSF_SYNC_MODE_SHIFT 17
+#define RT2860_TSF_SYNC_MODE_DIS 0
+#define RT2860_TSF_SYNC_MODE_STA 1
+#define RT2860_TSF_SYNC_MODE_IBSS 2
+#define RT2860_TSF_SYNC_MODE_HOSTAP 3
+#define RT2860_TSF_TIMER_EN (1 << 16)
+#define RT2860_BCN_INTVAL_SHIFT 0
/* possible flags for register TBTT_SYNC_CFG */
-#define RT2860_BCN_CWMIN_SHIFT 20
-#define RT2860_BCN_AIFSN_SHIFT 16
-#define RT2860_BCN_EXP_WIN_SHIFT 8
-#define RT2860_TBTT_ADJUST_SHIFT 0
+#define RT2860_BCN_CWMIN_SHIFT 20
+#define RT2860_BCN_AIFSN_SHIFT 16
+#define RT2860_BCN_EXP_WIN_SHIFT 8
+#define RT2860_TBTT_ADJUST_SHIFT 0
/* possible flags for register INT_TIMER_CFG */
-#define RT2860_GP_TIMER_SHIFT 16
-#define RT2860_PRE_TBTT_TIMER_SHIFT 0
+#define RT2860_GP_TIMER_SHIFT 16
+#define RT2860_PRE_TBTT_TIMER_SHIFT 0
/* possible flags for register INT_TIMER_EN */
-#define RT2860_GP_TIMER_EN (1 << 1)
-#define RT2860_PRE_TBTT_INT_EN (1 << 0)
+#define RT2860_GP_TIMER_EN (1 << 1)
+#define RT2860_PRE_TBTT_INT_EN (1 << 0)
/* possible flags for register MAC_STATUS_REG */
-#define RT2860_RX_STATUS_BUSY (1 << 1)
-#define RT2860_TX_STATUS_BUSY (1 << 0)
+#define RT2860_RX_STATUS_BUSY (1 << 1)
+#define RT2860_TX_STATUS_BUSY (1 << 0)
/* possible flags for register PWR_PIN_CFG */
-#define RT2860_IO_ADDA_PD (1 << 3)
-#define RT2860_IO_PLL_PD (1 << 2)
-#define RT2860_IO_RA_PE (1 << 1)
-#define RT2860_IO_RF_PE (1 << 0)
+#define RT2860_IO_ADDA_PD (1 << 3)
+#define RT2860_IO_PLL_PD (1 << 2)
+#define RT2860_IO_RA_PE (1 << 1)
+#define RT2860_IO_RF_PE (1 << 0)
/* possible flags for register AUTO_WAKEUP_CFG */
-#define RT2860_AUTO_WAKEUP_EN (1 << 15)
-#define RT2860_SLEEP_TBTT_NUM_SHIFT 8
-#define RT2860_WAKEUP_LEAD_TIME_SHIFT 0
+#define RT2860_AUTO_WAKEUP_EN (1 << 15)
+#define RT2860_SLEEP_TBTT_NUM_SHIFT 8
+#define RT2860_WAKEUP_LEAD_TIME_SHIFT 0
/* possible flags for register TX_PIN_CFG */
-#define RT2860_TRSW_POL (1 << 19)
-#define RT2860_TRSW_EN (1 << 18)
-#define RT2860_RFTR_POL (1 << 17)
-#define RT2860_RFTR_EN (1 << 16)
-#define RT2860_LNA_PE_G1_POL (1 << 15)
-#define RT2860_LNA_PE_A1_POL (1 << 14)
-#define RT2860_LNA_PE_G0_POL (1 << 13)
-#define RT2860_LNA_PE_A0_POL (1 << 12)
-#define RT2860_LNA_PE_G1_EN (1 << 11)
-#define RT2860_LNA_PE_A1_EN (1 << 10)
-#define RT2860_LNA_PE1_EN (RT2860_LNA_PE_A1_EN | RT2860_LNA_PE_G1_EN)
-#define RT2860_LNA_PE_G0_EN (1 << 9)
-#define RT2860_LNA_PE_A0_EN (1 << 8)
-#define RT2860_LNA_PE0_EN (RT2860_LNA_PE_A0_EN | RT2860_LNA_PE_G0_EN)
-#define RT2860_PA_PE_G1_POL (1 << 7)
-#define RT2860_PA_PE_A1_POL (1 << 6)
-#define RT2860_PA_PE_G0_POL (1 << 5)
-#define RT2860_PA_PE_A0_POL (1 << 4)
-#define RT2860_PA_PE_G1_EN (1 << 3)
-#define RT2860_PA_PE_A1_EN (1 << 2)
-#define RT2860_PA_PE_G0_EN (1 << 1)
-#define RT2860_PA_PE_A0_EN (1 << 0)
+#define RT2860_TRSW_POL (1 << 19)
+#define RT2860_TRSW_EN (1 << 18)
+#define RT2860_RFTR_POL (1 << 17)
+#define RT2860_RFTR_EN (1 << 16)
+#define RT2860_LNA_PE_G1_POL (1 << 15)
+#define RT2860_LNA_PE_A1_POL (1 << 14)
+#define RT2860_LNA_PE_G0_POL (1 << 13)
+#define RT2860_LNA_PE_A0_POL (1 << 12)
+#define RT2860_LNA_PE_G1_EN (1 << 11)
+#define RT2860_LNA_PE_A1_EN (1 << 10)
+#define RT2860_LNA_PE1_EN (RT2860_LNA_PE_A1_EN | RT2860_LNA_PE_G1_EN)
+#define RT2860_LNA_PE_G0_EN (1 << 9)
+#define RT2860_LNA_PE_A0_EN (1 << 8)
+#define RT2860_LNA_PE0_EN (RT2860_LNA_PE_A0_EN | RT2860_LNA_PE_G0_EN)
+#define RT2860_PA_PE_G1_POL (1 << 7)
+#define RT2860_PA_PE_A1_POL (1 << 6)
+#define RT2860_PA_PE_G0_POL (1 << 5)
+#define RT2860_PA_PE_A0_POL (1 << 4)
+#define RT2860_PA_PE_G1_EN (1 << 3)
+#define RT2860_PA_PE_A1_EN (1 << 2)
+#define RT2860_PA_PE_G0_EN (1 << 1)
+#define RT2860_PA_PE_A0_EN (1 << 0)
/* possible flags for register TX_BAND_CFG */
-#define RT2860_5G_BAND_SEL_N (1 << 2)
-#define RT2860_5G_BAND_SEL_P (1 << 1)
-#define RT2860_TX_BAND_SEL (1 << 0)
+#define RT2860_5G_BAND_SEL_N (1 << 2)
+#define RT2860_5G_BAND_SEL_P (1 << 1)
+#define RT2860_TX_BAND_SEL (1 << 0)
/* possible flags for register TX_SW_CFG0 */
-#define RT2860_DLY_RFTR_EN_SHIFT 24
-#define RT2860_DLY_TRSW_EN_SHIFT 16
-#define RT2860_DLY_PAPE_EN_SHIFT 8
-#define RT2860_DLY_TXPE_EN_SHIFT 0
+#define RT2860_DLY_RFTR_EN_SHIFT 24
+#define RT2860_DLY_TRSW_EN_SHIFT 16
+#define RT2860_DLY_PAPE_EN_SHIFT 8
+#define RT2860_DLY_TXPE_EN_SHIFT 0
/* possible flags for register TX_SW_CFG1 */
-#define RT2860_DLY_RFTR_DIS_SHIFT 16
-#define RT2860_DLY_TRSW_DIS_SHIFT 8
-#define RT2860_DLY_PAPE_DIS SHIFT 0
+#define RT2860_DLY_RFTR_DIS_SHIFT 16
+#define RT2860_DLY_TRSW_DIS_SHIFT 8
+#define RT2860_DLY_PAPE_DIS SHIFT 0
/* possible flags for register TX_SW_CFG2 */
-#define RT2860_DLY_LNA_EN_SHIFT 24
-#define RT2860_DLY_LNA_DIS_SHIFT 16
-#define RT2860_DLY_DAC_EN_SHIFT 8
-#define RT2860_DLY_DAC_DIS_SHIFT 0
+#define RT2860_DLY_LNA_EN_SHIFT 24
+#define RT2860_DLY_LNA_DIS_SHIFT 16
+#define RT2860_DLY_DAC_EN_SHIFT 8
+#define RT2860_DLY_DAC_DIS_SHIFT 0
/* possible flags for register TXOP_THRES_CFG */
-#define RT2860_TXOP_REM_THRES_SHIFT 24
-#define RT2860_CF_END_THRES_SHIFT 16
-#define RT2860_RDG_IN_THRES 8
-#define RT2860_RDG_OUT_THRES 0
+#define RT2860_TXOP_REM_THRES_SHIFT 24
+#define RT2860_CF_END_THRES_SHIFT 16
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-all
mailing list