svn commit: r215780 - head/share/man/man4

[Marius Strobl]

Author: marius
Date: Tue Nov 23 22:07:10 2010
New Revision: 215780
URL: http://svn.freebsd.org/changeset/base/215780

Log:
  Remove the description of the link0 link option, since r215297 the master
  media option generally should be used instead. Actually I think the lists
  of media types should be removed from the manual pages of MAC drivers
  altogether and users just pointed to the output of `ifconfig -m` instead;
  even before r215297 there were several outdated descriptions, technically
  it's wrong most of the time as not the MAC drivers support these media
  types but actually the PHY drivers do and it generally doesn't make sense
  to maintain these lists in every manual page of a driver as the media is
  auto-detected.

Modified:
  head/share/man/man4/bge.4
  head/share/man/man4/msk.4
  head/share/man/man4/nge.4
  head/share/man/man4/sk.4
  head/share/man/man4/stge.4
  head/share/man/man4/vge.4

Modified: head/share/man/man4/bge.4
==============================================================================
--- head/share/man/man4/bge.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/bge.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -31,7 +31,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd November 7, 2010
+.Dd November 23, 2010
 .Dt BGE 4
 .Os
 .Sh NAME
@@ -144,27 +144,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE

Modified: head/share/man/man4/msk.4
==============================================================================
--- head/share/man/man4/msk.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/msk.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 30, 2010
+.Dd November 23, 2010
 .Dt MSK 4
 .Os
 .Sh NAME
@@ -125,27 +125,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE

Modified: head/share/man/man4/nge.4
==============================================================================
--- head/share/man/man4/nge.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/nge.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -31,7 +31,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 21, 2009
+.Dd November 23, 2010
 .Dt NGE 4
 .Os
 .Sh NAME
@@ -131,27 +131,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width link0
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE

Modified: head/share/man/man4/sk.4
==============================================================================
--- head/share/man/man4/sk.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/sk.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd January 23, 2009
+.Dd November 23, 2010
 .Dt SK 4
 .Os
 .Sh NAME
@@ -132,27 +132,6 @@ Force full duplex operation
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Ar link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE

Modified: head/share/man/man4/stge.4
==============================================================================
--- head/share/man/man4/stge.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/stge.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -29,7 +29,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd July 25, 2006
+.Dd November 23, 2010
 .Dt STGE 4
 .Os
 .Sh NAME
@@ -129,27 +129,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port is configured as master and the other one as slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE

Modified: head/share/man/man4/vge.4
==============================================================================
--- head/share/man/man4/vge.4	Tue Nov 23 21:49:32 2010	(r215779)
+++ head/share/man/man4/vge.4	Tue Nov 23 22:07:10 2010	(r215780)
@@ -30,7 +30,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd December 18, 2009
+.Dd November 23, 2010
 .Dt VGE 4
 .Os
 .Sh NAME
@@ -137,27 +137,6 @@ Force full duplex operation.
 Force half duplex operation.
 .El
 .Pp
-The
-.Nm
-driver also supports one special link option for 1000baseTX cards:
-.Bl -tag -width ".Cm link0"
-.It Cm link0
-With 1000baseTX cards, establishing a link between two ports requires
-that one port be configured as a master and the other a slave.
-With autonegotiation,
-the master/slave settings will be chosen automatically.
-However when manually selecting the link state, it is necessary to
-force one side of the link to be a master and the other a slave.
-The
-.Nm
-driver configures the ports as slaves by default.
-Setting the
-.Cm link0
-flag with
-.Xr ifconfig 8
-will set a port as a master instead.
-.El
-.Pp
 For more information on configuring this device, see
 .Xr ifconfig 8 .
 .Sh HARDWARE