svn commit: r209042 - in stable/8/sys/dev/ata: . chipsets
Nathan Whitehorn
nwhitehorn at FreeBSD.org
Fri Jun 11 14:06:35 UTC 2010
Author: nwhitehorn
Date: Fri Jun 11 14:06:35 2010
New Revision: 209042
URL: http://svn.freebsd.org/changeset/base/209042
Log:
MFC r208870:
Some revisions of the Serverworks K2 SATA controller have a data
corruption bug where if an ATA command is issued before DMA is started,
data will become available to the controller before it knows what to do
with it. This results in either data corruption or a controller crash.
This patch remedies the problem by adopting the workaround employed
by Linux and Darwin: starting the DMA engine prior to sending the ATA
command.
Reviewed by: mav
Approved by: re (kib)
Modified:
stable/8/sys/dev/ata/ata-all.h
stable/8/sys/dev/ata/ata-lowlevel.c
stable/8/sys/dev/ata/chipsets/ata-serverworks.c
Directory Properties:
stable/8/sys/ (props changed)
stable/8/sys/amd64/include/xen/ (props changed)
stable/8/sys/cddl/contrib/opensolaris/ (props changed)
stable/8/sys/contrib/dev/acpica/ (props changed)
stable/8/sys/contrib/pf/ (props changed)
stable/8/sys/dev/xen/xenpci/ (props changed)
stable/8/sys/geom/sched/ (props changed)
Modified: stable/8/sys/dev/ata/ata-all.h
==============================================================================
--- stable/8/sys/dev/ata/ata-all.h Fri Jun 11 14:05:34 2010 (r209041)
+++ stable/8/sys/dev/ata/ata-all.h Fri Jun 11 14:06:35 2010 (r209042)
@@ -564,6 +564,7 @@ struct ata_channel {
#define ATA_CHECKS_CABLE 0x20
#define ATA_NO_ATAPI_DMA 0x40
#define ATA_SATA 0x80
+#define ATA_DMA_BEFORE_CMD 0x100
int pm_level; /* power management level */
int devices; /* what is present */
Modified: stable/8/sys/dev/ata/ata-lowlevel.c
==============================================================================
--- stable/8/sys/dev/ata/ata-lowlevel.c Fri Jun 11 14:05:34 2010 (r209041)
+++ stable/8/sys/dev/ata/ata-lowlevel.c Fri Jun 11 14:06:35 2010 (r209042)
@@ -141,6 +141,14 @@ ata_begin_transaction(struct ata_request
goto begin_finished;
}
+ /* start DMA engine if necessary */
+ if ((ch->flags & ATA_DMA_BEFORE_CMD) &&
+ ch->dma.start && ch->dma.start(request)) {
+ device_printf(request->parent, "error starting DMA\n");
+ request->result = EIO;
+ goto begin_finished;
+ }
+
/* issue command */
if (ch->hw.command(request)) {
device_printf(request->parent, "error issuing %s command\n",
@@ -150,7 +158,8 @@ ata_begin_transaction(struct ata_request
}
/* start DMA engine */
- if (ch->dma.start && ch->dma.start(request)) {
+ if (!(ch->flags & ATA_DMA_BEFORE_CMD) &&
+ ch->dma.start && ch->dma.start(request)) {
device_printf(request->parent, "error starting DMA\n");
request->result = EIO;
goto begin_finished;
Modified: stable/8/sys/dev/ata/chipsets/ata-serverworks.c
==============================================================================
--- stable/8/sys/dev/ata/chipsets/ata-serverworks.c Fri Jun 11 14:05:34 2010 (r209041)
+++ stable/8/sys/dev/ata/chipsets/ata-serverworks.c Fri Jun 11 14:06:35 2010 (r209042)
@@ -241,6 +241,16 @@ ata_serverworks_ch_attach(device_t dev)
ATA_OUTL(ctlr->r_res2, ch_offset + 0x88, 0);
ATA_OUTL(ctlr->r_res2, ch_offset + 0x80,
ATA_INL(ctlr->r_res2, ch_offset + 0x80) & ~0x00040000);
+
+ /*
+ * Some controllers have a bug where they will send the command
+ * to the drive before seeing a DMA start, and then can begin
+ * receiving data before the DMA start arrives. The controller
+ * will then become confused and either corrupt the data or crash.
+ * Remedy this by starting DMA before sending the drive command.
+ */
+
+ ch->flags |= ATA_DMA_BEFORE_CMD;
}
/* chip does not reliably do 64K DMA transfers */
More information about the svn-src-all
mailing list