svn commit: r211111 - head/sys/dev/usb/serial
Gavin Atkinson
gavin at FreeBSD.org
Mon Aug 9 17:42:05 UTC 2010
Author: gavin
Date: Mon Aug 9 17:42:05 2010
New Revision: 211111
URL: http://svn.freebsd.org/changeset/base/211111
Log:
Attempt to autodetect the cype of chipset, rather than storing this
within the device table. This code uses the same algorithm as used in the
Linux, NetBSD and DragonflyBSD driver.
While investigating this, it became apparent that the Linux driver always
initialises the device, and not just in the PL2303HX case. Change
uplcom(4) to do the same.
This change allows us to synchronize our device ID list with Linux and
NetBSD, without requiring knowledge of the chipset in use.
Reviewed by: hselasky
MFC after: 6 weeks
Modified:
head/sys/dev/usb/serial/uplcom.c
Modified: head/sys/dev/usb/serial/uplcom.c
==============================================================================
--- head/sys/dev/usb/serial/uplcom.c Mon Aug 9 17:42:04 2010 (r211110)
+++ head/sys/dev/usb/serial/uplcom.c Mon Aug 9 17:42:05 2010 (r211111)
@@ -144,7 +144,7 @@ SYSCTL_INT(_hw_usb_uplcom, OID_AUTO, deb
#define RSAQ_STATUS_DCD 0x01
#define TYPE_PL2303 0
-#define TYPE_PL2303X 1
+#define TYPE_PL2303HX 1
enum {
UPLCOM_BULK_DT_WR,
@@ -174,7 +174,9 @@ struct uplcom_softc {
/* prototypes */
static usb_error_t uplcom_reset(struct uplcom_softc *, struct usb_device *);
-static int uplcom_pl2303x_init(struct usb_device *);
+static usb_error_t uplcom_pl2303_do(struct usb_device *, int8_t, uint8_t,
+ uint16_t, uint16_t, uint16_t);
+static int uplcom_pl2303_init(struct usb_device *, uint8_t);
static void uplcom_cfg_set_dtr(struct ucom_softc *, uint8_t);
static void uplcom_cfg_set_rts(struct ucom_softc *, uint8_t);
static void uplcom_cfg_set_break(struct ucom_softc *, uint8_t);
@@ -243,59 +245,33 @@ static struct ucom_callback uplcom_callb
.ucom_poll = &uplcom_poll,
};
-#define UPLCOM_DEV(v,p,rl,rh,t) \
- { USB_VENDOR(USB_VENDOR_##v), USB_PRODUCT(USB_PRODUCT_##v##_##p), \
- USB_DEV_BCD_GTEQ(rl), USB_DEV_BCD_LTEQ(rh), USB_DRIVER_INFO(TYPE_##t) }
+#define UPLCOM_DEV(v,p) \
+ { USB_VENDOR(USB_VENDOR_##v), USB_PRODUCT(USB_PRODUCT_##v##_##p) }
static const struct usb_device_id uplcom_devs[] = {
- /* Belkin F5U257 */
- UPLCOM_DEV(BELKIN, F5U257, 0, 0xFFFF, PL2303X),
- /* I/O DATA USB-RSAQ */
- UPLCOM_DEV(IODATA, USBRSAQ, 0, 0xFFFF, PL2303),
- /* I/O DATA USB-RSAQ2 */
- UPLCOM_DEV(PROLIFIC, RSAQ2, 0, 0xFFFF, PL2303),
- /* I/O DATA USB-RSAQ3 */
- UPLCOM_DEV(PROLIFIC, RSAQ3, 0, 0xFFFF, PL2303X),
- /* I/O DATA USB-RSAQ5 */
- UPLCOM_DEV(IODATA, USBRSAQ5, 0, 0xFFFF, PL2303X),
- /* PLANEX USB-RS232 URS-03 */
- UPLCOM_DEV(ATEN, UC232A, 0, 0xFFFF, PL2303),
- /* TrendNet TU-S9 */
- UPLCOM_DEV(PROLIFIC, PL2303, 0x0400, 0xFFFF, PL2303X),
- /* ST Lab USB-SERIAL-4 */
- UPLCOM_DEV(PROLIFIC, PL2303, 0x0300, 0x03FF, PL2303X),
- /* IOGEAR/ATEN UC-232A (also ST Lab USB-SERIAL-1) */
- UPLCOM_DEV(PROLIFIC, PL2303, 0, 0x02FF, PL2303),
- /* TDK USB-PHS Adapter UHA6400 */
- UPLCOM_DEV(TDK, UHA6400, 0, 0xFFFF, PL2303),
- /* RATOC REX-USB60 */
- UPLCOM_DEV(RATOC, REXUSB60, 0, 0xFFFF, PL2303),
- /* ELECOM UC-SGT */
- UPLCOM_DEV(ELECOM, UCSGT, 0, 0xFFFF, PL2303),
- UPLCOM_DEV(ELECOM, UCSGT0, 0, 0xFFFF, PL2303),
- /* Sagem USB-Serial Controller */
- UPLCOM_DEV(SAGEM, USBSERIAL, 0, 0xFFFF, PL2303X),
- /* Sony Ericsson USB Cable */
- UPLCOM_DEV(SONYERICSSON, DCU10, 0, 0xFFFF, PL2303),
- /* SOURCENEXT KeikaiDenwa 8 */
- UPLCOM_DEV(SOURCENEXT, KEIKAI8, 0, 0xFFFF, PL2303),
- /* SOURCENEXT KeikaiDenwa 8 with charger */
- UPLCOM_DEV(SOURCENEXT, KEIKAI8_CHG, 0, 0, PL2303),
- /* HAL Corporation Crossam2+USB */
- UPLCOM_DEV(HAL, IMR001, 0, 0xFFFF, PL2303),
- /* Sitecom USB to Serial */
- UPLCOM_DEV(SITECOM, SERIAL, 0, 0xFFFF, PL2303),
- /* Tripp-Lite U209-000-R */
- UPLCOM_DEV(TRIPPLITE, U209, 0, 0xFFFF, PL2303X),
- UPLCOM_DEV(RADIOSHACK, USBCABLE, 0, 0xFFFF, PL2303),
- /* Prolific Pharos */
- UPLCOM_DEV(PROLIFIC, PHAROS, 0, 0xFFFF, PL2303),
- /* Willcom W-SIM */
- UPLCOM_DEV(PROLIFIC2, WSIM, 0, 0xFFFF, PL2303X),
- /* Mobile Action MA-620 Infrared Adapter */
- UPLCOM_DEV(MOBILEACTION, MA620, 0, 0xFFFF, PL2303X),
- /* Corega CG-USBRS232R */
- UPLCOM_DEV(COREGA, CGUSBRS232R, 0, 0xFFFF, PL2303X),
+ UPLCOM_DEV(ATEN, UC232A), /* PLANEX USB-RS232 URS-03 */
+ UPLCOM_DEV(BELKIN, F5U257), /* Belkin F5U257 */
+ UPLCOM_DEV(COREGA, CGUSBRS232R), /* Corega CG-USBRS232R */
+ UPLCOM_DEV(ELECOM, UCSGT), /* ELECOM UC-SGT */
+ UPLCOM_DEV(ELECOM, UCSGT0), /* ELECOM UC-SGT */
+ UPLCOM_DEV(HAL, IMR001), /* HAL Corporation Crossam2+USB */
+ UPLCOM_DEV(IODATA, USBRSAQ), /* I/O DATA USB-RSAQ */
+ UPLCOM_DEV(IODATA, USBRSAQ5), /* I/O DATA USB-RSAQ5 */
+ UPLCOM_DEV(MOBILEACTION, MA620), /* Mobile Action MA-620 Infrared Adapter */
+ UPLCOM_DEV(PROLIFIC, PHAROS), /* Prolific Pharos */
+ UPLCOM_DEV(PROLIFIC, PL2303), /* Generic */
+ UPLCOM_DEV(PROLIFIC, RSAQ2), /* I/O DATA USB-RSAQ2 */
+ UPLCOM_DEV(PROLIFIC, RSAQ3), /* I/O DATA USB-RSAQ3 */
+ UPLCOM_DEV(PROLIFIC2, WSIM), /* Willcom W-SIM */
+ UPLCOM_DEV(RADIOSHACK, USBCABLE),
+ UPLCOM_DEV(RATOC, REXUSB60), /* RATOC REX-USB60 */
+ UPLCOM_DEV(SAGEM, USBSERIAL), /* Sagem USB-Serial Controller */
+ UPLCOM_DEV(SITECOM, SERIAL), /* Sitecom USB to Serial */
+ UPLCOM_DEV(SONYERICSSON, DCU10), /* Sony Ericsson USB Cable */
+ UPLCOM_DEV(SOURCENEXT, KEIKAI8), /* SOURCENEXT KeikaiDenwa 8 */
+ UPLCOM_DEV(SOURCENEXT, KEIKAI8_CHG), /* SOURCENEXT KeikaiDenwa 8 with charger */
+ UPLCOM_DEV(TDK, UHA6400), /* TDK USB-PHS Adapter UHA6400 */
+ UPLCOM_DEV(TRIPPLITE, U209), /* Tripp-Lite U209-000-R */
};
#undef UPLCOM_DEV
@@ -345,6 +321,7 @@ uplcom_attach(device_t dev)
struct uplcom_softc *sc = device_get_softc(dev);
struct usb_interface *iface;
struct usb_interface_descriptor *id;
+ struct usb_device_descriptor *dd;
int error;
DPRINTFN(11, "\n");
@@ -354,11 +331,19 @@ uplcom_attach(device_t dev)
DPRINTF("sc = %p\n", sc);
- sc->sc_chiptype = USB_GET_DRIVER_INFO(uaa);
sc->sc_udev = uaa->device;
+ /* Determine the chip type. This algorithm is taken from Linux. */
+ dd = usbd_get_device_descriptor(sc->sc_udev);
+ if (dd->bDeviceClass == 0x02)
+ sc->sc_chiptype = TYPE_PL2303;
+ else if (dd->bMaxPacketSize == 0x40)
+ sc->sc_chiptype = TYPE_PL2303HX;
+ else
+ sc->sc_chiptype = TYPE_PL2303;
+
DPRINTF("chiptype: %s\n",
- (sc->sc_chiptype == TYPE_PL2303X) ?
+ (sc->sc_chiptype == TYPE_PL2303HX) ?
"2303X" : "2303");
/*
@@ -422,11 +407,9 @@ uplcom_attach(device_t dev)
* do the initialization during attach so that the system does not
* sleep during open:
*/
- if (sc->sc_chiptype == TYPE_PL2303X) {
- if (uplcom_pl2303x_init(uaa->device)) {
- device_printf(dev, "init failed\n");
- goto detach;
- }
+ if (uplcom_pl2303_init(uaa->device, sc->sc_chiptype)) {
+ device_printf(dev, "init failed\n");
+ goto detach;
}
return (0);
@@ -464,56 +447,58 @@ uplcom_reset(struct uplcom_softc *sc, st
return (usbd_do_request(udev, NULL, &req, NULL));
}
-struct pl2303x_init {
- uint8_t req_type;
- uint8_t request;
- uint16_t value;
- uint16_t index;
- uint16_t length;
-};
-
-static const struct pl2303x_init pl2303x[] = {
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 0, 0},
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1},
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1},
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 1, 0},
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1},
- {UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0, 1, 0},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 1, 0, 0},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 2, 0x44, 0},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 8, 0, 0},
- {UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 9, 0, 0},
-};
-
-#define N_PL2302X_INIT (sizeof(pl2303x)/sizeof(pl2303x[0]))
-
-static int
-uplcom_pl2303x_init(struct usb_device *udev)
+static usb_error_t
+uplcom_pl2303_do(struct usb_device *udev, int8_t req_type, uint8_t request,
+ uint16_t value, uint16_t index, uint16_t length)
{
struct usb_device_request req;
usb_error_t err;
uint8_t buf[4];
- uint8_t i;
- for (i = 0; i != N_PL2302X_INIT; i++) {
- req.bmRequestType = pl2303x[i].req_type;
- req.bRequest = pl2303x[i].request;
- USETW(req.wValue, pl2303x[i].value);
- USETW(req.wIndex, pl2303x[i].index);
- USETW(req.wLength, pl2303x[i].length);
-
- err = usbd_do_request(udev, NULL, &req, buf);
- if (err) {
- DPRINTF("error=%s\n", usbd_errstr(err));
- return (EIO);
- }
+ req.bmRequestType = req_type;
+ req.bRequest = request;
+ USETW(req.wValue, value);
+ USETW(req.wIndex, index);
+ USETW(req.wLength, length);
+
+ err = usbd_do_request(udev, NULL, &req, buf);
+ if (err) {
+ DPRINTF("error=%s\n", usbd_errstr(err));
+ return (1);
}
return (0);
}
+static int
+uplcom_pl2303_init(struct usb_device *udev, uint8_t chiptype)
+{
+ int err;
+
+ if (uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
+ || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 0, 0)
+ || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
+ || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1)
+ || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
+ || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 1, 0)
+ || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
+ || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1)
+ || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0, 1, 0)
+ || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 1, 0, 0))
+ return (EIO);
+
+ if (chiptype == TYPE_PL2303HX)
+ err = uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 2, 0x44, 0);
+ else
+ err = uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 2, 0x24, 0);
+ if (err)
+ return (EIO);
+
+ if (uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 8, 0, 0)
+ || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 9, 0, 0))
+ return (EIO);
+ return (0);
+}
+
static void
uplcom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
{
@@ -614,7 +599,7 @@ uplcom_pre_param(struct ucom_softc *ucom
* XXX: We currently cannot identify the PL2303HX rev. D, so treat
* it the same as the PL2303X.
*/
- if (sc->sc_chiptype == TYPE_PL2303) {
+ if (sc->sc_chiptype != TYPE_PL2303HX) {
for (i = 0; i < N_UPLCOM_RATES; i++) {
if (uplcom_rates[i] == t->c_ospeed)
return (0);
@@ -693,7 +678,7 @@ uplcom_cfg_param(struct ucom_softc *ucom
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = UPLCOM_SET_REQUEST;
USETW(req.wValue, 0);
- if (sc->sc_chiptype == TYPE_PL2303X)
+ if (sc->sc_chiptype == TYPE_PL2303HX)
USETW(req.wIndex, UPLCOM_SET_CRTSCTS_PL2303X);
else
USETW(req.wIndex, UPLCOM_SET_CRTSCTS);
More information about the svn-src-all
mailing list