svn commit: r188983 - in head/sys/dev/usb: . controller
Andrew Thompson
thompsa at FreeBSD.org
Mon Feb 23 19:39:14 PST 2009
Author: thompsa
Date: Tue Feb 24 03:39:13 2009
New Revision: 188983
URL: http://svn.freebsd.org/changeset/base/188983
Log:
MFp4 //depot/projects/usb at 157853
Clean up old way of polling the USB hardware. The existing polling support was
a bit hackish.
Submitted by: Hans Petter Selasky
Modified:
head/sys/dev/usb/controller/at91dci.c
head/sys/dev/usb/controller/atmegadci.c
head/sys/dev/usb/controller/ehci.c
head/sys/dev/usb/controller/musb_otg.c
head/sys/dev/usb/controller/ohci.c
head/sys/dev/usb/controller/uhci.c
head/sys/dev/usb/controller/uss820dci.c
head/sys/dev/usb/usb_controller.h
head/sys/dev/usb/usb_core.h
head/sys/dev/usb/usb_ioctl.h
head/sys/dev/usb/usb_request.c
head/sys/dev/usb/usb_transfer.c
Modified: head/sys/dev/usb/controller/at91dci.c
==============================================================================
--- head/sys/dev/usb/controller/at91dci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/at91dci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -260,23 +260,16 @@ static void
at91dci_wakeup_peer(struct usb2_xfer *xfer)
{
struct at91dci_softc *sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
- uint8_t use_polling;
if (!(sc->sc_flags.status_suspend)) {
return;
}
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
AT91_UDP_WRITE_4(sc, AT91_UDP_GSTATE, AT91_UDP_GSTATE_ESR);
/* wait 8 milliseconds */
- if (use_polling) {
- /* polling */
- DELAY(8000);
- } else {
- /* Wait for reset to complete. */
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
- }
+ /* Wait for reset to complete. */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
AT91_UDP_WRITE_4(sc, AT91_UDP_GSTATE, 0);
}
@@ -1826,7 +1819,6 @@ at91dci_root_ctrl_done(struct usb2_xfer
struct at91dci_softc *sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
uint16_t value;
uint16_t index;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -1844,8 +1836,6 @@ at91dci_root_ctrl_done(struct usb2_xfer
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
/* demultiplex the control request */
switch (std->req.bmRequestType) {
@@ -2459,7 +2449,6 @@ struct usb2_bus_methods at91dci_bus_meth
.pipe_init = &at91dci_pipe_init,
.xfer_setup = &at91dci_xfer_setup,
.xfer_unsetup = &at91dci_xfer_unsetup,
- .do_poll = &at91dci_do_poll,
.get_hw_ep_profile = &at91dci_get_hw_ep_profile,
.set_stall = &at91dci_set_stall,
.clear_stall = &at91dci_clear_stall,
Modified: head/sys/dev/usb/controller/atmegadci.c
==============================================================================
--- head/sys/dev/usb/controller/atmegadci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/atmegadci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -204,25 +204,18 @@ static void
atmegadci_wakeup_peer(struct usb2_xfer *xfer)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(xfer->xroot->bus);
- uint8_t use_polling;
uint8_t temp;
if (!sc->sc_flags.status_suspend) {
return;
}
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
temp = ATMEGA_READ_1(sc, ATMEGA_UDCON);
ATMEGA_WRITE_1(sc, ATMEGA_UDCON, temp | ATMEGA_UDCON_RMWKUP);
/* wait 8 milliseconds */
- if (use_polling) {
- /* polling */
- DELAY(8000);
- } else {
- /* Wait for reset to complete. */
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
- }
+ /* Wait for reset to complete. */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
/* hardware should have cleared RMWKUP bit */
}
@@ -1695,7 +1688,6 @@ atmegadci_root_ctrl_done(struct usb2_xfe
struct atmegadci_softc *sc = ATMEGA_BUS2SC(xfer->xroot->bus);
uint16_t value;
uint16_t index;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -1713,8 +1705,6 @@ atmegadci_root_ctrl_done(struct usb2_xfe
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
/* demultiplex the control request */
switch (std->req.bmRequestType) {
@@ -2319,7 +2309,6 @@ struct usb2_bus_methods atmegadci_bus_me
.pipe_init = &atmegadci_pipe_init,
.xfer_setup = &atmegadci_xfer_setup,
.xfer_unsetup = &atmegadci_xfer_unsetup,
- .do_poll = &atmegadci_do_poll,
.get_hw_ep_profile = &atmegadci_get_hw_ep_profile,
.set_stall = &atmegadci_set_stall,
.clear_stall = &atmegadci_clear_stall,
Modified: head/sys/dev/usb/controller/ehci.c
==============================================================================
--- head/sys/dev/usb/controller/ehci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/ehci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -3051,7 +3051,6 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
uint16_t value;
uint16_t index;
uint8_t l;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -3069,8 +3068,6 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
"wValue=0x%04x wIndex=0x%04x\n",
std->req.bmRequestType, std->req.bRequest,
@@ -3217,23 +3214,13 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
EOWRITE4(sc, port, v | EHCI_PS_FPR);
}
/* wait 20ms for resume sequence to complete */
- if (use_polling) {
- /* polling */
- DELAY(20000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50);
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50);
EOWRITE4(sc, port, v & ~(EHCI_PS_SUSP |
EHCI_PS_FPR | (3 << 10) /* High Speed */ ));
- /* settle time */
- if (use_polling) {
- /* polling */
- DELAY(4000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 250);
- }
+ /* 4ms settle time */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 250);
break;
case UHF_PORT_POWER:
EOWRITE4(sc, port, v & ~EHCI_PS_PP);
@@ -3382,27 +3369,17 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
v &= ~(EHCI_PS_PE | EHCI_PS_PR);
EOWRITE4(sc, port, v | EHCI_PS_PR);
- if (use_polling) {
- /* polling */
- DELAY(USB_PORT_ROOT_RESET_DELAY * 1000);
- } else {
- /* Wait for reset to complete. */
- usb2_pause_mtx(&sc->sc_bus.bus_mtx,
- USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
- }
+ /* Wait for reset to complete. */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx,
+ USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
/* Terminate reset sequence. */
if (!(sc->sc_flags & EHCI_SCFLG_NORESTERM))
EOWRITE4(sc, port, v);
- if (use_polling) {
- /* polling */
- DELAY(EHCI_PORT_RESET_COMPLETE * 1000);
- } else {
- /* Wait for HC to complete reset. */
- usb2_pause_mtx(&sc->sc_bus.bus_mtx,
- USB_MS_TO_TICKS(EHCI_PORT_RESET_COMPLETE));
- }
+ /* Wait for HC to complete reset. */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx,
+ USB_MS_TO_TICKS(EHCI_PORT_RESET_COMPLETE));
v = EOREAD4(sc, port);
DPRINTF("ehci after reset, status=0x%08x\n", v);
@@ -3956,7 +3933,6 @@ struct usb2_bus_methods ehci_bus_methods
.pipe_init = ehci_pipe_init,
.xfer_setup = ehci_xfer_setup,
.xfer_unsetup = ehci_xfer_unsetup,
- .do_poll = ehci_do_poll,
.get_dma_delay = ehci_get_dma_delay,
.device_resume = ehci_device_resume,
.device_suspend = ehci_device_suspend,
Modified: head/sys/dev/usb/controller/musb_otg.c
==============================================================================
--- head/sys/dev/usb/controller/musb_otg.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/musb_otg.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -206,25 +206,18 @@ musbotg_wakeup_peer(struct usb2_xfer *xf
{
struct musbotg_softc *sc = MUSBOTG_BUS2SC(xfer->xroot->bus);
uint8_t temp;
- uint8_t use_polling;
if (!(sc->sc_flags.status_suspend)) {
return;
}
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
temp = MUSB2_READ_1(sc, MUSB2_REG_POWER);
temp |= MUSB2_MASK_RESUME;
MUSB2_WRITE_1(sc, MUSB2_REG_POWER, temp);
/* wait 8 milliseconds */
- if (use_polling) {
- /* polling */
- DELAY(8000);
- } else {
- /* Wait for reset to complete. */
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
- }
+ /* Wait for reset to complete. */
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
temp = MUSB2_READ_1(sc, MUSB2_REG_POWER);
temp &= ~MUSB2_MASK_RESUME;
@@ -2232,7 +2225,6 @@ musbotg_root_ctrl_done(struct usb2_xfer
struct musbotg_softc *sc = MUSBOTG_BUS2SC(xfer->xroot->bus);
uint16_t value;
uint16_t index;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -2250,8 +2242,6 @@ musbotg_root_ctrl_done(struct usb2_xfer
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
/* demultiplex the control request */
switch (std->req.bmRequestType) {
@@ -2867,7 +2857,6 @@ struct usb2_bus_methods musbotg_bus_meth
.pipe_init = &musbotg_pipe_init,
.xfer_setup = &musbotg_xfer_setup,
.xfer_unsetup = &musbotg_xfer_unsetup,
- .do_poll = &musbotg_do_poll,
.get_hw_ep_profile = &musbotg_get_hw_ep_profile,
.set_stall = &musbotg_set_stall,
.clear_stall = &musbotg_clear_stall,
Modified: head/sys/dev/usb/controller/ohci.c
==============================================================================
--- head/sys/dev/usb/controller/ohci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/ohci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -2156,7 +2156,6 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
uint16_t value;
uint16_t index;
uint8_t l;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -2174,8 +2173,6 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
"wValue=0x%04x wIndex=0x%04x\n",
std->req.bmRequestType, std->req.bRequest,
@@ -2410,13 +2407,8 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
OWRITE4(sc, port, UPS_RESET);
for (v = 0;; v++) {
if (v < 12) {
- if (use_polling) {
- /* polling */
- DELAY(USB_PORT_ROOT_RESET_DELAY * 1000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx,
- USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx,
+ USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
if ((OREAD4(sc, port) & UPS_RESET) == 0) {
break;
@@ -2853,7 +2845,6 @@ struct usb2_bus_methods ohci_bus_methods
.pipe_init = ohci_pipe_init,
.xfer_setup = ohci_xfer_setup,
.xfer_unsetup = ohci_xfer_unsetup,
- .do_poll = ohci_do_poll,
.get_dma_delay = ohci_get_dma_delay,
.device_resume = ohci_device_resume,
.device_suspend = ohci_device_suspend,
Modified: head/sys/dev/usb/controller/uhci.c
==============================================================================
--- head/sys/dev/usb/controller/uhci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/uhci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -2382,7 +2382,7 @@ struct usb2_hub_descriptor_min uhci_hubd
* events have been reset.
*/
static usb2_error_t
-uhci_portreset(uhci_softc_t *sc, uint16_t index, uint8_t use_polling)
+uhci_portreset(uhci_softc_t *sc, uint16_t index)
{
uint16_t port;
uint16_t x;
@@ -2406,23 +2406,14 @@ uhci_portreset(uhci_softc_t *sc, uint16_
UHCICMD(sc, (UHCI_CMD_MAXP | UHCI_CMD_RS));
/* wait a little bit */
- if (use_polling) {
- DELAY(10000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
}
x = URWMASK(UREAD2(sc, port));
UWRITE2(sc, port, x | UHCI_PORTSC_PR);
- if (use_polling) {
- /* polling */
- DELAY(USB_PORT_ROOT_RESET_DELAY * 1000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx,
- USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx,
+ USB_MS_TO_TICKS(USB_PORT_ROOT_RESET_DELAY));
DPRINTFN(4, "uhci port %d reset, status0 = 0x%04x\n",
index, UREAD2(sc, port));
@@ -2449,13 +2440,8 @@ uhci_portreset(uhci_softc_t *sc, uint16_
for (lim = 0; lim < 12; lim++) {
- if (use_polling) {
- /* polling */
- DELAY(USB_PORT_RESET_DELAY * 1000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx,
- USB_MS_TO_TICKS(USB_PORT_RESET_DELAY));
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx,
+ USB_MS_TO_TICKS(USB_PORT_RESET_DELAY));
x = UREAD2(sc, port);
@@ -2540,7 +2526,6 @@ uhci_root_ctrl_done(struct usb2_xfer *xf
uint16_t index;
uint16_t status;
uint16_t change;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -2558,8 +2543,6 @@ uhci_root_ctrl_done(struct usb2_xfer *xf
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
"wValue=0x%04x wIndex=0x%04x\n",
std->req.bmRequestType, std->req.bRequest,
@@ -2779,12 +2762,7 @@ uhci_root_ctrl_done(struct usb2_xfer *xf
UWRITE2(sc, port, URWMASK(x));
/* wait 20ms for resume sequence to complete */
- if (use_polling) {
- /* polling */
- DELAY(20000);
- } else {
- usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50);
- }
+ usb2_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50);
/* clear suspend and resume detect */
UWRITE2(sc, port, URWMASK(x) & ~(UHCI_PORTSC_RD |
@@ -2831,7 +2809,7 @@ uhci_root_ctrl_done(struct usb2_xfer *xf
UWRITE2(sc, port, x | UHCI_PORTSC_SUSP);
break;
case UHF_PORT_RESET:
- std->err = uhci_portreset(sc, index, use_polling);
+ std->err = uhci_portreset(sc, index);
goto done;
case UHF_PORT_POWER:
/* pretend we turned on power */
@@ -3372,7 +3350,6 @@ struct usb2_bus_methods uhci_bus_methods
.pipe_init = uhci_pipe_init,
.xfer_setup = uhci_xfer_setup,
.xfer_unsetup = uhci_xfer_unsetup,
- .do_poll = uhci_do_poll,
.get_dma_delay = uhci_get_dma_delay,
.device_resume = uhci_device_resume,
.device_suspend = uhci_device_suspend,
Modified: head/sys/dev/usb/controller/uss820dci.c
==============================================================================
--- head/sys/dev/usb/controller/uss820dci.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/controller/uss820dci.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -1844,7 +1844,6 @@ uss820dci_root_ctrl_done(struct usb2_xfe
struct uss820dci_softc *sc = USS820_DCI_BUS2SC(xfer->xroot->bus);
uint16_t value;
uint16_t index;
- uint8_t use_polling;
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
@@ -1862,8 +1861,6 @@ uss820dci_root_ctrl_done(struct usb2_xfe
value = UGETW(std->req.wValue);
index = UGETW(std->req.wIndex);
- use_polling = mtx_owned(xfer->xroot->xfer_mtx) ? 1 : 0;
-
/* demultiplex the control request */
switch (std->req.bmRequestType) {
@@ -2481,7 +2478,6 @@ struct usb2_bus_methods uss820dci_bus_me
.pipe_init = &uss820dci_pipe_init,
.xfer_setup = &uss820dci_xfer_setup,
.xfer_unsetup = &uss820dci_xfer_unsetup,
- .do_poll = &uss820dci_do_poll,
.get_hw_ep_profile = &uss820dci_get_hw_ep_profile,
.set_stall = &uss820dci_set_stall,
.clear_stall = &uss820dci_clear_stall,
Modified: head/sys/dev/usb/usb_controller.h
==============================================================================
--- head/sys/dev/usb/usb_controller.h Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/usb_controller.h Tue Feb 24 03:39:13 2009 (r188983)
@@ -57,7 +57,6 @@ struct usb2_bus_methods {
/* USB Device and Host mode - Mandatory */
void (*pipe_init) (struct usb2_device *udev, struct usb2_endpoint_descriptor *edesc, struct usb2_pipe *pipe);
- void (*do_poll) (struct usb2_bus *);
void (*xfer_setup) (struct usb2_setup_params *parm);
void (*xfer_unsetup) (struct usb2_xfer *xfer);
void (*get_dma_delay) (struct usb2_bus *, uint32_t *pdelay);
Modified: head/sys/dev/usb/usb_core.h
==============================================================================
--- head/sys/dev/usb/usb_core.h Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/usb_core.h Tue Feb 24 03:39:13 2009 (r188983)
@@ -34,10 +34,6 @@
/* Default USB configuration */
-#ifndef USB_NO_POLL
-#define USB_NO_POLL 0
-#endif
-
#ifndef USB_USE_CONDVAR
#define USB_USE_CONDVAR 0
#endif
Modified: head/sys/dev/usb/usb_ioctl.h
==============================================================================
--- head/sys/dev/usb/usb_ioctl.h Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/usb_ioctl.h Tue Feb 24 03:39:13 2009 (r188983)
@@ -48,7 +48,6 @@ struct usb2_read_dir {
struct usb2_ctl_request {
void *ucr_data;
uint16_t ucr_flags;
-#define USB_USE_POLLING 0x0001 /* internal flag */
#define USB_SHORT_XFER_OK 0x0004 /* allow short reads */
#define USB_DELAY_STATUS_STAGE 0x0010 /* insert delay before STATUS stage */
#define USB_USER_DATA_PTR 0x0020 /* internal flag */
Modified: head/sys/dev/usb/usb_request.c
==============================================================================
--- head/sys/dev/usb/usb_request.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/usb_request.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -201,10 +201,6 @@ tr_setup:
* o USB_SHORT_XFER_OK: allows the data transfer to be shorter than
* specified
*
- * o USB_USE_POLLING: forces the transfer to complete from the
- * current context by polling the interrupt handler. This flag can be
- * used to perform USB transfers after that the kernel has crashed.
- *
* o USB_DELAY_STATUS_STAGE: allows the status stage to be performed
* at a later point in time. This is tunable by the "hw.usb.ss_delay"
* sysctl. This flag is mostly useful for debugging.
@@ -385,12 +381,8 @@ usb2_do_request_flags(struct usb2_device
usb2_transfer_start(xfer);
while (usb2_transfer_pending(xfer)) {
- if ((flags & USB_USE_POLLING) || cold) {
- usb2_do_poll(udev->default_xfer, USB_DEFAULT_XFER_MAX);
- } else {
- usb2_cv_wait(udev->default_cv,
- xfer->xroot->xfer_mtx);
- }
+ usb2_cv_wait(udev->default_cv,
+ xfer->xroot->xfer_mtx);
}
err = xfer->error;
Modified: head/sys/dev/usb/usb_transfer.c
==============================================================================
--- head/sys/dev/usb/usb_transfer.c Tue Feb 24 03:38:24 2009 (r188982)
+++ head/sys/dev/usb/usb_transfer.c Tue Feb 24 03:39:13 2009 (r188983)
@@ -2705,120 +2705,14 @@ usb2_clear_stall_callback(struct usb2_xf
return (1); /* Clear Stall Finished */
}
-#if (USB_NO_POLL == 0)
-
-/*------------------------------------------------------------------------*
- * usb2_callout_poll
- *------------------------------------------------------------------------*/
-static void
-usb2_callout_poll(struct usb2_xfer *xfer)
-{
- struct usb2_callout *co;
- void (*cb) (void *);
- void *arg;
- struct mtx *mtx;
- uint32_t delta;
-
- if (xfer == NULL) {
- return;
- }
- co = &xfer->timeout_handle;
-
-#if __FreeBSD_version >= 800000
- mtx = (void *)(co->co.c_lock);
-#else
- mtx = co->co.c_mtx;
-#endif
- mtx_lock(mtx);
-
- if (usb2_callout_pending(co)) {
- delta = ticks - co->co.c_time;
- if (!(delta & 0x80000000)) {
-
- cb = co->co.c_func;
- arg = co->co.c_arg;
-
- /* timed out */
- usb2_callout_stop(co);
-
- (cb) (arg);
- }
- }
- mtx_unlock(mtx);
-}
-
-
-/*------------------------------------------------------------------------*
- * usb2_do_poll
- *
- * This function is called from keyboard driver when in polling
- * mode.
- *------------------------------------------------------------------------*/
void
usb2_do_poll(struct usb2_xfer **ppxfer, uint16_t max)
{
- struct usb2_xfer *xfer;
- struct usb2_xfer_root *xroot;
- struct usb2_device *udev;
- struct usb2_proc_msg *pm;
- uint32_t to;
- uint16_t n;
-
- /* compute system tick delay */
- to = ((uint32_t)(1000000)) / ((uint32_t)(hz));
- DELAY(to);
- atomic_add_int((volatile int *)&ticks, 1);
-
- for (n = 0; n != max; n++) {
- xfer = ppxfer[n];
- if (xfer) {
- xroot = xfer->xroot;
- udev = xroot->udev;
-
- /*
- * Poll hardware - signal that we are polling by
- * locking the private mutex:
- */
- USB_XFER_LOCK(xfer);
- (udev->bus->methods->do_poll) (udev->bus);
- USB_XFER_UNLOCK(xfer);
-
- /* poll clear stall start */
- USB_BUS_LOCK(xfer->xroot->bus);
- pm = &udev->cs_msg[0].hdr;
- (pm->pm_callback) (pm);
- USB_BUS_UNLOCK(xfer->xroot->bus);
-
- if (udev->default_xfer[1]) {
-
- /* poll timeout */
- usb2_callout_poll(udev->default_xfer[1]);
-
- /* poll clear stall done thread */
- USB_BUS_LOCK(xfer->xroot->bus);
- pm = &udev->default_xfer[1]->
- xroot->done_m[0].hdr;
- (pm->pm_callback) (pm);
- USB_BUS_UNLOCK(xfer->xroot->bus);
- }
- /* poll timeout */
- usb2_callout_poll(xfer);
-
- /* poll done thread */
- USB_BUS_LOCK(xfer->xroot->bus);
- pm = &xroot->done_m[0].hdr;
- (pm->pm_callback) (pm);
- USB_BUS_UNLOCK(xfer->xroot->bus);
- }
+ static uint8_t once = 0;
+ /* polling is currently not supported */
+ if (!once) {
+ once = 1;
+ printf("usb2_do_poll: USB polling is "
+ "not supported!\n");
}
}
-
-#else
-
-void
-usb2_do_poll(struct usb2_xfer **ppxfer, uint16_t max)
-{
- /* polling not supported */
-}
-
-#endif
More information about the svn-src-all
mailing list