svn commit: r201209 - in head/sys: conf contrib/dev/iwn dev/iwn
modules/iwnfw modules/iwnfw/iwn1000 modules/iwnfw/iwn4965
modules/iwnfw/iwn5000 modules/iwnfw/iwn6000
Rui Paulo
rpaulo at FreeBSD.org
Wed Dec 30 15:55:46 UTC 2009
On 30 Dec 2009, at 11:40, Giorgos Keramidas wrote:
> On Tue, 29 Dec 2009 19:47:34 +0000 (UTC), Rui Paulo <rpaulo at FreeBSD.org> wrote:
>> Author: rpaulo
>> Date: Tue Dec 29 19:47:34 2009
>> New Revision: 201209
>> URL: http://svn.freebsd.org/changeset/base/201209
>>
>> Log:
>> iwn(4) update. Notable changes:
>> * new firmware
>> * untested support for 1000 and 6000 series
>> * bgscan support
>> * remove unnecessary RXON changes
>> * allow setting of country/regdomain by enforcing channel flags read
>> from the EEPROM
>> * suspend/resume fixes
>> * RF kill switch fixes
>> * LED adjustments
>> * several bus_dma*() related fixes
>> * addressed some LORs
>> * many other bug fixes
>
> First of all thanks for all the updates :-)
>
> The new firmware seems to have a few problems when it tries to
> initialize my laptop's iwn0 interface. The laptop is a Thinkpad X61s,
> with an Intel 4965AGN wireless adapter:
>
> # pciconf -lv
> iwn0 at pci0:3:0:0: class=0x028000 card=0x11108086 chip=0x42308086 rev=0x61 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Intel Wireless WiFi Link 4965AGN (Intel 4965AGN)'
> class = network
>
> When wpa_supplicant is trying to associate with the new firmware in
> place I see in /var/log/messages:
>
> : Dec 30 13:10:43 kobe kernel: wlan0: Ethernet address: 00:1d:e0:6d:b8:27
> : Dec 30 13:10:43 kobe wpa_supplicant[2928]: Failed to initiate AP scan.
> : Dec 30 13:10:44 kobe kernel: firmware error log:
> : Dec 30 13:10:44 kobe kernel: error type = "SYSASSERT" (0x00000005)
> : Dec 30 13:10:44 kobe kernel: program counter = 0x0000147C
> : Dec 30 13:10:44 kobe kernel: source line = 0x0000058B
> : Dec 30 13:10:44 kobe kernel: error data = 0x0000058B00000000
> : Dec 30 13:10:44 kobe kernel: branch link = 0x0000145A00001492
> : Dec 30 13:10:44 kobe kernel: interrupt link = 0x000006DE00000000
> : Dec 30 13:10:44 kobe kernel: time = 7310
> : Dec 30 13:10:44 kobe kernel: driver status:
> : Dec 30 13:10:44 kobe kernel: tx ring 0: qid=0 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 1: qid=1 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 2: qid=2 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 3: qid=3 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 4: qid=4 cur=5 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 5: qid=5 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 6: qid=6 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 7: qid=7 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 8: qid=8 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 9: qid=9 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 10: qid=10 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 11: qid=11 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 12: qid=12 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 13: qid=13 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 14: qid=14 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: tx ring 15: qid=15 cur=0 queued=0
> : Dec 30 13:10:44 kobe kernel: rx ring: cur=6
> : Dec 30 13:10:45 kobe kernel: iwn0: iwn_config: could not set TX power
> : Dec 30 13:10:45 kobe kernel: iwn0: iwn_init_locked: could not configure device, error 35
> : Dec 30 13:10:53 kobe wpa_supplicant[2928]: Failed to initiate AP scan.
>
> Going back to my last kernel from Dec 27 works fine (I am sending this
> message over a wlan0 interface with that version of the firmware).
Did you try using the old firmware with the new driver?
--
Rui Paulo
More information about the svn-src-all
mailing list