svn commit: r191072 - head/sys/dev/fb
Marius Strobl
marius at FreeBSD.org
Tue Apr 14 19:11:03 UTC 2009
Author: marius
Date: Tue Apr 14 19:11:02 2009
New Revision: 191072
URL: http://svn.freebsd.org/changeset/base/191072
Log:
Fix whitespace.
Modified:
head/sys/dev/fb/machfb.c
Modified: head/sys/dev/fb/machfb.c
==============================================================================
--- head/sys/dev/fb/machfb.c Tue Apr 14 19:02:34 2009 (r191071)
+++ head/sys/dev/fb/machfb.c Tue Apr 14 19:11:02 2009 (r191072)
@@ -53,12 +53,12 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
-
+
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
- * Driver for ATI Mach64 graphics chips. Some code is derived from the
+ * Driver for ATI Mach64 graphics chips. Some code is derived from the
* ATI Rage Pro and Derivatives Programmer's Guide.
*/
@@ -100,7 +100,7 @@ __FBSDID("$FreeBSD$");
struct machfb_softc {
video_adapter_t sc_va; /* must be first */
- phandle_t sc_node;
+ phandle_t sc_node;
uint16_t sc_chip_id;
uint8_t sc_chip_rev;
@@ -572,7 +572,7 @@ machfb_init(int unit, video_adapter_t *a
vid_init_struct(adp, MACHFB_DRIVER_NAME, -1, unit);
- if (OF_getprop(sc->sc_node, "height", &sc->sc_height,
+ if (OF_getprop(sc->sc_node, "height", &sc->sc_height,
sizeof(sc->sc_height)) == -1)
return (ENXIO);
if (OF_getprop(sc->sc_node, "width", &sc->sc_width,
@@ -630,12 +630,12 @@ machfb_init(int unit, video_adapter_t *a
machfb_init_engine(sc);
#if 0
- mach64_adjust_frame(0, 0);
+ machfb_adjust_frame(0, 0);
#endif
machfb_set_mode(adp, 0);
/*
- * Install our 16-color color map. This is done only once and with
+ * Install our 16-color color map. This is done only once and with
* an offset of 16 on sparc64 as there the OBP driver expects white
* to be at index 0 and black at 255 (some versions also use 1 - 8
* for color text support or the full palette for the boot banner
@@ -880,13 +880,13 @@ machfb_mmap(video_adapter_t *adp, vm_off
if (adp->va_mem_base != 0 && offset >= adp->va_mem_base &&
offset < adp->va_mem_base + adp->va_mem_size) {
- *paddr = sc->sc_vmemh + offset - adp->va_mem_base;
+ *paddr = sc->sc_vmemh + offset - adp->va_mem_base;
return (0);
}
if (offset >= adp->va_registers &&
offset < adp->va_registers + adp->va_registers_size) {
- *paddr = sc->sc_memh + offset - adp->va_registers;
+ *paddr = sc->sc_memh + offset - adp->va_registers;
return (0);
}
@@ -1083,7 +1083,7 @@ machfb_puts(video_adapter_t *adp, vm_off
for (i = 0; i < len; i++) {
/*
* Accelerate continuous blanks by drawing a respective
- * rectangle instead. Drawing a rectangle of any size
+ * rectangle instead. Drawing a rectangle of any size
* takes about the same number of operations as drawing
* a single character.
*/
@@ -1091,7 +1091,7 @@ machfb_puts(video_adapter_t *adp, vm_off
a = (s[i] & 0xff00) >> 8;
if (c == 0x00 || c == 0x20 || c == 0xdb || c == 0xff) {
color2 = (a >> (c == 0xdb ? 0 : 4) & 0xf);
- x2 = (((off + i) % adp->va_info.vi_width) *
+ x2 = (((off + i) % adp->va_info.vi_width) *
adp->va_info.vi_cwidth) + sc->sc_xmargin;
y2 = (((off + i) / adp->va_info.vi_width) *
adp->va_info.vi_cheight) + sc->sc_ymargin;
@@ -1135,7 +1135,7 @@ machfb_putm(video_adapter_t *adp, int x,
if ((!(sc->sc_flags & MACHFB_CUREN)) &&
(error = machfb_cursor_install(sc)) < 0)
- return (error);
+ return (error);
else {
/*
* The hardware cursor always must be disabled when
@@ -1174,7 +1174,7 @@ machfb_pci_probe(device_t dev)
return (BUS_PROBE_DEFAULT);
}
}
-
+
return (ENXIO);
}
@@ -1192,8 +1192,8 @@ machfb_pci_attach(device_t dev)
node = ofw_bus_get_node(dev);
if ((sc = (struct machfb_softc *)vid_get_adapter(vid_find_adapter(
MACHFB_DRIVER_NAME, 0))) != NULL && sc->sc_node == node) {
- device_printf(dev, "console\n");
- device_set_softc(dev, sc);
+ device_printf(dev, "console\n");
+ device_set_softc(dev, sc);
} else {
sc = device_get_softc(dev);
bzero(sc, sizeof(struct machfb_softc));
@@ -1203,7 +1203,7 @@ machfb_pci_attach(device_t dev)
sc->sc_chip_rev = pci_get_revid(dev);
}
adp = &sc->sc_va;
-
+
/*
* Regardless whether we are the console and already allocated
* resources in machfb_configure() or not we have to allocate
@@ -1214,7 +1214,7 @@ machfb_pci_attach(device_t dev)
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, 2) | PCIM_CMD_PORTEN |
PCIM_CMD_MEMEN, 2);
-
+
sc->sc_memrid = PCIR_BAR(0);
if ((sc->sc_memres = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->sc_memrid, RF_ACTIVE)) == NULL) {
@@ -1228,18 +1228,18 @@ machfb_pci_attach(device_t dev)
sc->sc_regt = sc->sc_memt;
bus_space_subregion(sc->sc_regt, sc->sc_memh, MACH64_REG_OFF,
MACH64_REG_SIZE, &sc->sc_regh);
- adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres);
+ adp->va_buffer = (vm_offset_t)rman_get_virtual(sc->sc_memres);
adp->va_buffer_size = rman_get_size(sc->sc_memres);
/*
* Depending on the firmware version the VGA I/O and/or memory
- * resources of the Mach64 chips come up disabled. We generally
+ * resources of the Mach64 chips come up disabled. We generally
* enable them above (pci(4) actually already did this unless
* pci_enable_io_modes is not set) but this doesn't necessarily
- * mean that we get valid ones. Invalid resources seem to have
- * in common that they start at address 0. We don't allocate
+ * mean that we get valid ones. Invalid resources seem to have
+ * in common that they start at address 0. We don't allocate
* them in this case in order to avoid warnings in apb(4) and
- * crashes when using these invalid resources. Xorg is aware
+ * crashes when using these invalid resources. Xorg is aware
* of this and doesn't use the VGA resources in this case (but
* demands them if they are valid).
*/
@@ -1288,9 +1288,9 @@ machfb_pci_attach(device_t dev)
/*
* During device configuration we don't necessarily probe
* the adapter which is the console first so we can't use
- * the device unit number for the video adapter unit. The
+ * the device unit number for the video adapter unit. The
* worst case would be that we use the video adapter unit
- * 0 twice. As it doesn't really matter which unit number
+ * 0 twice. As it doesn't really matter which unit number
* the corresponding video adapter has just use the next
* unused one.
*/
@@ -1299,7 +1299,7 @@ machfb_pci_attach(device_t dev)
break;
if ((error = sw->init(i, adp, 0)) != 0) {
device_printf(dev, "cannot initialize adapter\n");
- goto fail_vmemres;
+ goto fail_vmemres;
}
}
@@ -1333,7 +1333,7 @@ machfb_pci_attach(device_t dev)
/*
* Allocate one page for the mouse pointer image at the end of
* the little endian aperture, right before the memory mapped
- * registers that might also reside there. Must be done after
+ * registers that might also reside there. Must be done after
* sc_memsize was set and possibly adjusted to account for the
* memory mapped registers.
*/
@@ -1346,7 +1346,7 @@ machfb_pci_attach(device_t dev)
/*
* Register a handler that performs some cosmetic surgery like
* turning off the mouse pointer on halt in preparation for
- * handing the screen over to the OFW. Register another handler
+ * handing the screen over to the OFW. Register another handler
* that turns off the CRTC when resetting, otherwise the OFW
* boot command issued by cpu_reset() just doesn't work.
*/
@@ -1358,12 +1358,12 @@ machfb_pci_attach(device_t dev)
return (0);
fail_vmemres:
- if (sc->sc_vmemres != NULL)
- bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid,
+ if (sc->sc_vmemres != NULL)
+ bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_vmemrid,
sc->sc_vmemres);
fail_viores:
- if (sc->sc_viores != NULL)
- bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid,
+ if (sc->sc_viores != NULL)
+ bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_viorid,
sc->sc_viores);
fail_memres:
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memres);
@@ -1556,7 +1556,7 @@ machfb_adjust_frame(struct machfb_softc
offset = ((x + y * sc->sc_width) * (sc->sc_depth >> 3)) >> 3;
regw(sc, CRTC_OFF_PITCH, (regr(sc, CRTC_OFF_PITCH) & 0xfff00000) |
- offset);
+ offset);
}
#endif
More information about the svn-src-all
mailing list