svn commit: r183966 - head/sys/dev/mii

Pyun YongHyeon yongari at FreeBSD.org
Fri Oct 17 05:26:52 UTC 2008


Author: yongari
Date: Fri Oct 17 05:26:51 2008
New Revision: 183966
URL: http://svn.freebsd.org/changeset/base/183966

Log:
  Some 88E1149 PHY's page select is initialized to point to other
  bank instead of copper/fiber bank which in turn resulted in
  wrong registers were accessed during PHY operation. It is
  believed that page 0 should be used for copper PHY so reinitialize
  E1000_EADR to select default copper PHY.
  This fixes link establishment issue of nfe(4) on Sun Fire X4140.
  
  OpenBSD also has similimar patch but they just reset the E1000_EADR
  register to page 0. However some Marvell PHYs((88E3082, 88E1000)
  don't have the extended address register and the meaning of the
  register is quite different for each PHY model. So selecting copper
  PHY is limited to 88E1149 PHY which seems to be the only one that
  exhibits link establishment problem. If parent device know the type
  of PHY(either copper or fiber) that information should be notified
  to PHY driver but there is no good way to pass this information yet.
  
  Reported by:	thompsa
  Reviewed by:	thompsa

Modified:
  head/sys/dev/mii/e1000phy.c

Modified: head/sys/dev/mii/e1000phy.c
==============================================================================
--- head/sys/dev/mii/e1000phy.c	Fri Oct 17 03:59:25 2008	(r183965)
+++ head/sys/dev/mii/e1000phy.c	Fri Oct 17 05:26:51 2008	(r183966)
@@ -153,6 +153,20 @@ e1000phy_attach(device_t dev)
 		if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)
 			sc->mii_flags |= MIIF_HAVEFIBER;
 		break;
+	case MII_MODEL_MARVELL_E1149:
+		/*
+		 * Some 88E1149 PHY's page select is initialized to
+		 * point to other bank instead of copper/fiber bank
+		 * which in turn resulted in wrong registers were
+		 * accessed during PHY operation. It is believed that
+		 * page 0 should be used for copper PHY so reinitialize
+		 * E1000_EADR to select default copper PHY. If parent
+		 * device know the type of PHY(either copper or fiber),
+		 * that information should be used to select default
+		 * type of PHY.
+		 */
+		PHY_WRITE(sc, E1000_EADR, 0);
+		break;
 	case MII_MODEL_MARVELL_E3082:
 		/* 88E3082 10/100 Fast Ethernet PHY. */
 		sc->mii_anegticks = MII_ANEGTICKS;


More information about the svn-src-all mailing list