svn commit: r186079 - head/sbin/atacontrol
Ruslan Ermilov
ru at FreeBSD.org
Sun Dec 14 12:56:57 UTC 2008
Author: ru
Date: Sun Dec 14 12:56:56 2008
New Revision: 186079
URL: http://svn.freebsd.org/changeset/base/186079
Log:
Fix the fallouts from r146267:
- Add the forgotten "mode" argument to the "mode" command.
- Move the description of "info" to where it belongs.
Modified:
head/sbin/atacontrol/atacontrol.8
Modified: head/sbin/atacontrol/atacontrol.8
==============================================================================
--- head/sbin/atacontrol/atacontrol.8 Sun Dec 14 11:48:51 2008 (r186078)
+++ head/sbin/atacontrol/atacontrol.8 Sun Dec 14 12:56:56 2008 (r186079)
@@ -25,7 +25,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd June 25, 2008
+.Dd December 14, 2008
.Dt ATACONTROL 8
.Os
.Sh NAME
@@ -63,6 +63,7 @@
.Nm
.Ic mode
.Ar device
+.Op Ar mode
.Nm
.Ic info
.Ar channel
@@ -94,7 +95,7 @@ The
.Ar channel
argument is the ATA channel device (e.g., ata0) on which to operate.
The following commands are supported:
-.Bl -tag -width "rebuild"
+.Bl -tag -width ".Ic addspare"
.It Ic attach
Attach an ATA
.Ar channel .
@@ -162,9 +163,13 @@ Rebuild a RAID1 array on a RAID capable
.It Ic status
Get the status of an ATA RAID.
.It Ic mode
-Without the mode argument, the current transfer modes of the
+Without the
+.Ar mode
+argument, the current transfer mode of the
device are printed.
-If the mode argument is given, the ATA driver
+If the
+.Ar mode
+argument is given, the ATA driver
is asked to change the transfer mode to the one given.
The ATA driver
will reject modes that are not supported by the hardware.
@@ -190,13 +195,12 @@ and
.Cm UDMA6
(alias
.Cm UDMA133 ) .
-The device name and manufacture/version strings are shown.
.It Ic cap
Show detailed info about the device on
.Ar device .
.It Ic spindown
Set or report timeout after which the
-.Ar device
+.Ar device
will be spun down.
To arm the timeout the device needs at least one more request after
setting the timeout.
@@ -205,6 +209,7 @@ No further actions are needed in this ca
.It Ic info
Show info about the attached devices on the
.Ar channel .
+The device name and manufacture/version strings are shown.
.It Ic list
Show info about all attached devices on all active controllers.
.El
@@ -312,7 +317,7 @@ If the system has a pure software array
RAID controller, then shut the system down, make sure that the disk
that was still working is moved to the bootable position (channel 0
or whatever the BIOS allows the system to boot from) and the blank disk
-is placed in the secondary position, then boot the system into
+is placed in the secondary position, then boot the system into
single-user mode and issue the command:
.Pp
.Dl "atacontrol addspare ar0 ad6"
More information about the svn-src-all
mailing list