svn commit: r398125 - in head: . Mk Mk/Scripts Mk/Uses astro/osmium devel/pire devel/sdl2pp games/spring graphics/glosm
David Chisnall
theraven at FreeBSD.org
Tue Sep 29 07:42:17 UTC 2015
What format (and where) does the test target expect to find the output?
David
> On 28 Sep 2015, at 18:20, Dmitry Marakasov <amdmi3 at FreeBSD.org> wrote:
>
> Author: amdmi3
> Date: Mon Sep 28 17:20:42 2015
> New Revision: 398125
> URL: https://svnweb.freebsd.org/changeset/ports/398125
>
> Log:
> Implemented complete support for test target.
>
> You can now `make test' on any port to run test sequence, no-op by default.
> If a port defines TEST_TARGET, it'll run sub-make with specified target,
> usually `check' or `test', useful if upstream supports that. The port may
> instead define custom do-test target, as well as usual satellite targets:
>
> {pre,do,post}-test, {pre,do,post}-test-OPT, {pre,do,post}-test-OPT-off
>
> `make test' builds and stages port first, so test may use both WRKDIR and
> STAGEDIR, and both BUILD and RUN depends are available for test target.
> Additionally, TEST_DEPENDS is now properly supported and may be used to
> define additional depends specifically for testing.
>
> Framework may define default tests for specific cases. For instance,
> perl5.mk and cran.mk already provide default test target on their own.
>
> This commit also converts my ports which have tests to this new framework.
>
> Approved by: portmgr (bapt)
> Differential Revision: D3680
>
> Added:
> head/Mk/Scripts/depends-list.sh
> - copied, changed from r397035, head/Mk/Scripts/all-depends-list.sh
> Modified:
> head/CHANGES
> head/Mk/Uses/cran.mk
> head/Mk/Uses/perl5.mk
> head/Mk/bsd.options.mk
> head/Mk/bsd.port.mk
> head/astro/osmium/Makefile
> head/devel/pire/Makefile
> head/devel/sdl2pp/Makefile
> head/games/spring/Makefile
> head/graphics/glosm/Makefile
>
> Modified: head/CHANGES
> ==============================================================================
> --- head/CHANGES Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/CHANGES Mon Sep 28 17:20:42 2015 (r398125)
> @@ -10,6 +10,26 @@ in the release notes and/or placed into
>
> All ports committers are allowed to commit to this file.
>
> +20150928:
> +AUTHOR: amdmi3 at FreeBSD.org
> +
> + Implemented complete support for test target.
> +
> + You can now `make test' on any port to run test sequence, no-op by default.
> + If a port defines TEST_TARGET, it'll run sub-make with specified target,
> + usually `check' or `test' if upstream supports that. The port may also
> + define custom do-test target, as well as usual satellite targets:
> +
> + {pre,do,post}-test, {pre,do,post}-test-OPT, {pre,do,post}-test-OPT-off
> +
> + `make test' builds and stages port first, so test may use both WRKDIR and
> + STAGEDIR, and both BUILD and RUN depends are available for test target.
> + Additionally, TEST_DEPENDS is now properly supported and may be used to
> + define additional depends specifically for testing.
> +
> + Framework may define default tests for specific cases. For instance,
> + perl5.mk and cran.mk provide default test target on their own.
> +
> 20150926:
> AUTHOR: bapt at FreeBSD.org
>
>
> Copied and modified: head/Mk/Scripts/depends-list.sh (from r397035, head/Mk/Scripts/all-depends-list.sh)
> ==============================================================================
> --- head/Mk/Scripts/all-depends-list.sh Wed Sep 16 00:58:12 2015 (r397035, copy source)
> +++ head/Mk/Scripts/depends-list.sh Mon Sep 28 17:20:42 2015 (r398125)
> @@ -6,7 +6,7 @@ set -e
>
> . ${dp_SCRIPTSDIR}/functions.sh
>
> -validate_env dp_ALLDEPENDS dp_PORTSDIR dp_PKGNAME dp_MAKE
> +validate_env dp_ALLDEPENDS dp_PORTSDIR dp_PKGNAME
>
> set -u
>
> @@ -31,7 +31,6 @@ check_dep() {
> continue
> fi
> echo ${d}
> - check_dep $(${dp_MAKE} -C ${d} -V_UNIFIED_DEPENDS)
> done
> }
>
>
> Modified: head/Mk/Uses/cran.mk
> ==============================================================================
> --- head/Mk/Uses/cran.mk Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/Mk/Uses/cran.mk Mon Sep 28 17:20:42 2015 (r398125)
> @@ -41,14 +41,14 @@ WRKSRC?= ${WRKDIR}/${PORTNAME}
> NO_BUILD= yes
> R_COMMAND= ${LOCALBASE}/bin/R
>
> -.if !target(regression-test)
> +.if !target(do-test)
> R_POSTCMD_CHECK_OPTIONS?= --timings
>
> .if !exists(${LOCALBASE}/bin/pdflatex)
> R_POSTCMD_CHECK_OPTIONS+= --no-manual --no-rebuild-vignettes
> .endif
>
> -regression-test: build
> +do-test:
> @cd ${WRKDIR} ; ${SETENV} ${MAKE_ENV} _R_CHECK_FORCE_SUGGESTS_=FALSE \
> ${R_COMMAND} ${R_PRECMD_CHECK_OPTIONS} CMD check \
> ${R_POSTCMD_CHECK_OPTIONS} ${PORTNAME}
>
> Modified: head/Mk/Uses/perl5.mk
> ==============================================================================
> --- head/Mk/Uses/perl5.mk Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/Mk/Uses/perl5.mk Mon Sep 28 17:20:42 2015 (r398125)
> @@ -308,19 +308,14 @@ fix-perl-things:
> @${RM} -f ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH}/perllocal.pod* || :
> @${RMDIR} -p ${STAGEDIR}${PREFIX}/lib/perl5/${PERL_VER}/${PERL_ARCH} 2>/dev/null || :
>
> -.if !target(regression-test)
> -TEST_ARGS?= ${MAKE_ARGS}
> -TEST_ENV?= ${MAKE_ENV}
> +.if !target(do-test)
> TEST_TARGET?= test
> TEST_WRKSRC?= ${BUILD_WRKSRC}
> -.if !target(test)
> -test: regression-test
> -.endif # test
> -regression-test: build
> +do-test:
> .if ${USE_PERL5:Mmodbuild*}
> - -cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
> + cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
> .elif ${USE_PERL5:Mconfigure}
> - -cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
> + cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
> .endif # USE_PERL5:Mmodbuild*
> .endif # regression-test
> .endif # defined(_POSTMKINCLUDED)
>
> Modified: head/Mk/bsd.options.mk
> ==============================================================================
> --- head/Mk/bsd.options.mk Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/Mk/bsd.options.mk Mon Sep 28 17:20:42 2015 (r398125)
> @@ -162,6 +162,7 @@ _OPTIONS_TARGETS= fetch:300:pre fetch:50
> configure:300:pre configure:500:do configure:700:post \
> build:300:pre build:500:do build:700:post \
> install:300:pre install:500:do install:700:post \
> + test:300:pre test:500:do test:700:post \
> package:300:pre package:500:do package:700:post \
> stage:800:post
>
>
> Modified: head/Mk/bsd.port.mk
> ==============================================================================
> --- head/Mk/bsd.port.mk Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/Mk/bsd.port.mk Mon Sep 28 17:20:42 2015 (r398125)
> @@ -294,6 +294,17 @@ FreeBSD_MAINTAINER= portmgr at FreeBSD.org
> # if a particular version is desired.
> # LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
> # package depends on. "lib" is the name of a shared library.
> +# TEST_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
> +# package depends on in the "test" stage. "path" is the
> +# name of a file if it starts with a slash (/), an
> +# executable otherwise. make will test for the existence
> +# (if it is a full pathname) or search for it in your
> +# $PATH (if it is an executable) and go into "dir" to do
> +# a "make all install" if it's not found. If the third
> +# field ("target") exists, it will be used instead of
> +# ${DEPENDS_TARGET}. The first field also supports a
> +# package name with a version range, in the form package>=1.2
> +# if a particular version is desired.
> # DEPENDS_TARGET
> # - The default target to execute when a port is calling a
> # dependency.
> @@ -648,6 +659,9 @@ FreeBSD_MAINTAINER= portmgr at FreeBSD.org
> # run-depends-list
> # - Show all directories which are run-dependencies
> # for this port.
> +# test-depends-list
> +# - Show all directories which are test-dependencies
> +# for this port.
> #
> # extract - Unpacks ${DISTFILES} into ${WRKDIR}.
> # patch - Apply any provided patches to the source.
> @@ -659,6 +673,7 @@ FreeBSD_MAINTAINER= portmgr at FreeBSD.org
> # flag.
> # deinstall - Remove the installation.
> # deinstall-all - Remove all installations with the same PKGORIGIN.
> +# test - Run tests for the port.
> # package - Create a package from an _installed_ port.
> # package-recursive
> # - Create a package for a port and _all_ of its dependencies.
> @@ -715,6 +730,7 @@ FreeBSD_MAINTAINER= portmgr at FreeBSD.org
> #
> # NO_BUILD - Use a dummy (do-nothing) build target.
> # NO_INSTALL - Use a dummy (do-nothing) install target.
> +# NO_TEST - Use a dummy (do-nothing) test target.
> #
> # Here are some variables used in various stages.
> #
> @@ -843,6 +859,18 @@ FreeBSD_MAINTAINER= portmgr at FreeBSD.org
> # - Disable CCACHE support for example for certain ports if
> # CCACHE is enabled. User settable.
> #
> +# For test:
> +#
> +# TEST_TARGET - Target for sub-make in test stage. If not defined,
> +# no default test target is provided.
> +# Default: (none)
> +# TEST_WRKSRC - Directory to do test in (default: ${WRKSRC}).
> +# TEST_ENV - Additional environment vars passed to sub-make in test
> +# stage
> +# Default: ${MAKE_ENV}
> +# TEST_ARGS - Any extra arguments to sub-make in test stage
> +# Default: ${MAKE_ARGS}
> +#
> # For install:
> #
> # INSTALL_TARGET
> @@ -1423,7 +1451,7 @@ UID!= ${ID} -u
> DESTDIRNAME?= DESTDIR
>
> # setup empty variables for USES targets
> -.for target in sanity fetch extract patch configure build install package stage
> +.for target in sanity fetch extract patch configure build install test package stage
> _USES_${target}?=
> .endfor
>
> @@ -1478,6 +1506,9 @@ PKG_NOTES+= no_provide_shlib
> PKG_NOTE_no_provide_shlib= yes
> .endif
>
> +TEST_ARGS?= ${MAKE_ARGS}
> +TEST_ENV?= ${MAKE_ENV}
> +
> PKG_ENV+= PORTSDIR=${PORTSDIR}
> CONFIGURE_ENV+= XDG_DATA_HOME=${WRKDIR} \
> XDG_CONFIG_HOME=${WRKDIR} \
> @@ -1547,6 +1578,7 @@ PATCH_WRKSRC?= ${WRKSRC}
> CONFIGURE_WRKSRC?= ${WRKSRC}
> BUILD_WRKSRC?= ${WRKSRC}
> INSTALL_WRKSRC?=${WRKSRC}
> +TEST_WRKSRC?= ${WRKSRC}
>
> PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} \
> RESETPREFIX=${PREFIX}
> @@ -1933,6 +1965,7 @@ REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS}
> EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g}
> CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g}
> INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g}
> +TEST_COOKIE?= ${WRKDIR}/.test_done.${PORTNAME}.${PREFIX:S/\//_/g}
> BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g}
> PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g}
> PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g}
> @@ -2793,7 +2826,7 @@ IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME}
> .endif
>
> _TARGETS= check-sanity fetch checksum extract patch configure all build \
> - install reinstall package stage restage
> + install reinstall test package stage restage
>
> .for target in ${_TARGETS}
> .if !target(${target})
> @@ -2919,6 +2952,12 @@ build: configure
> @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
> .endif
>
> +# Disable test
> +.if defined(NO_TEST) && !target(test)
> +test: stage
> + @${TOUCH} ${TOUCH_FLAGS} ${TEST_COOKIE}
> +.endif
> +
> # Disable package
> .if defined(NO_PACKAGE) && !target(package)
> package:
> @@ -3454,6 +3493,23 @@ do-install:
> @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${FAKEROOT} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
> .endif
>
> +# Test
> +
> +.if !target(do-test) && defined(TEST_TARGET)
> +DO_MAKE_TEST?= ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${TEST_ARGS:C,^${DESTDIRNAME}=.*,,g}
> +do-test:
> + @(cd ${TEST_WRKSRC}; if ! ${DO_MAKE_TEST} ${TEST_TARGET}; then \
> + if [ -n "${TEST_FAIL_MESSAGE}" ] ; then \
> + ${ECHO_MSG} "===> Tests failed unexpectedly."; \
> + (${ECHO_CMD} "${TEST_FAIL_MESSAGE}") | ${FMT} 75 79 ; \
> + fi; \
> + ${FALSE}; \
> + fi)
> +.elif !target(do-test)
> +do-test:
> + @${DO_NADA}
> +.endif
> +
> # Package
>
> .if !target(do-package)
> @@ -3740,6 +3796,8 @@ stage-message:
> @${ECHO_MSG} "===> Staging for ${PKGNAME}"
> install-message:
> @${ECHO_MSG} "===> Installing for ${PKGNAME}"
> +test-message:
> + @${ECHO_MSG} "===> Testing for ${PKGNAME}"
> package-message:
> @${ECHO_MSG} "===> Building package for ${PKGNAME}"
>
> @@ -4260,7 +4318,7 @@ package-noinstall: package
> .if !target(depends)
> depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends
>
> -.for deptype in PKG EXTRACT PATCH FETCH BUILD LIB RUN
> +.for deptype in PKG EXTRACT PATCH FETCH BUILD LIB RUN TEST
> ${deptype:tl}-depends:
> .if defined(${deptype}_DEPENDS) && !defined(NO_DEPENDS)
> @${SETENV} \
> @@ -4291,7 +4349,7 @@ ${deptype:tl}-depends:
>
> # Dependency lists: both build and runtime, recursive. Print out directory names.
>
> -_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}
> +_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} ${TEST_DEPENDS}
> _DEPEND_SPECIALS= ${_UNIFIED_DEPENDS:M*\:*\:*:C,^[^:]*:([^:]*):.*$,\1,}
>
> all-depends-list:
> @@ -4458,6 +4516,18 @@ RUN-DEPENDS-LIST= \
> fi; \
> done | ${SORT} -u
>
> +test-depends-list:
> +.if defined(TEST_DEPENDS)
> + @${TEST-DEPENDS-LIST}
> +.endif
> +
> +TEST-DEPENDS-LIST= \
> + ${SETENV} dp_ALLDEPENDS="${TEST_DEPENDS}" \
> + dp_PORTSDIR="${PORTSDIR}" \
> + dp_PKGNAME="${PKGNAME}" \
> + dp_SCRIPTSDIR="${SCRIPTSDIR}" \
> + ${SH} ${SCRIPTSDIR}/depends-list.sh
> +
> # Package (recursive runtime) dependency list. Print out both directory names
> # and package names.
>
> @@ -5556,7 +5626,7 @@ show-dev-errors:
> # Please note that the order of the following targets is important, and
> # should not be modified.
>
> -_TARGETS_STAGES= SANITY PKG FETCH EXTRACT PATCH CONFIGURE BUILD INSTALL PACKAGE STAGE
> +_TARGETS_STAGES= SANITY PKG FETCH EXTRACT PATCH CONFIGURE BUILD INSTALL TEST PACKAGE STAGE
>
> # Define the SEQ of actions to take when each target is ran, and which targets
> # it depends on before running its SEQ.
> @@ -5620,6 +5690,10 @@ _STAGE_SEQ= 050:stage-message 100:stage
> .if defined(DEVELOPER)
> _STAGE_SEQ+= 995:stage-qa
> .endif
> +_TEST_DEP= stage
> +_TEST_SEQ= 100:test-message 150:test-depends 300:pre-test 500:do-test \
> + 800:post-test \
> + ${_OPTIONS_test} ${_USES_test}
> _INSTALL_DEP= stage
> _INSTALL_SEQ= 100:install-message 150:run-depends 151:lib-depends \
> 200:check-already-installed
> @@ -5670,7 +5744,7 @@ _${_t}_REAL_SUSEQ+= ${s}
> # See above *_SEQ and *_DEP. The _DEP will run before this defined target is
> # ran. The _SEQ will run as this target once _DEP is satisfied.
>
> -.for target in extract patch configure build stage install package
> +.for target in extract patch configure build stage install test package
>
> # Check if config dialog needs to show and execute it if needed. If is it not
> # needed (_OPTIONS_OK), then just depend on the cookie which is defined later
>
> Modified: head/astro/osmium/Makefile
> ==============================================================================
> --- head/astro/osmium/Makefile Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/astro/osmium/Makefile Mon Sep 28 17:20:42 2015 (r398125)
> @@ -46,9 +46,6 @@ do-build-DOXYGEN-on:
> cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} \
> ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKR_ARGS} doc
>
> -regression-test:
> - cd ${WRKSRC}/test && ${SETENV} ${MAKE_ENV} ${SH} run_tests.sh
> -
> do-install:
> cd ${WRKSRC}/include && ${COPYTREE_SHARE} '${PORTNAME} ${PORTNAME}.hpp' \
> ${STAGEDIR}${PREFIX}/include/
> @@ -58,4 +55,7 @@ do-install:
> do-install-DOXYGEN-on:
> cd ${WRKSRC}/doc && ${COPYTREE_SHARE} html ${STAGEDIR}${DOCSDIR}/
>
> +do-test:
> + cd ${WRKSRC}/test && ${SETENV} ${MAKE_ENV} ${SH} run_tests.sh
> +
> .include <bsd.port.mk>
>
> Modified: head/devel/pire/Makefile
> ==============================================================================
> --- head/devel/pire/Makefile Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/devel/pire/Makefile Mon Sep 28 17:20:42 2015 (r398125)
> @@ -20,22 +20,9 @@ GNU_CONFIGURE= yes
> INSTALL_TARGET= install-strip
> USES= autoreconf bison gmake libtool
> USE_LDCONFIG= yes
> +TEST_TARGET= check
>
> ONLY_FOR_ARCHS= amd64 i386 ia64
> ONLY_FOR_ARCHS_REASON= not yet ported to big-endian platforms
>
> -OPTIONS_DEFINE= UNITTEST
> -UNITTEST_DESC= Compile with unittest support
> -
> -.include <bsd.port.options.mk>
> -
> -.if ${PORT_OPTIONS:MUNITTEST} || defined(PACKAGE_BUILDING)
> -BUILD_DEPENDS+= cppunit-config:${PORTSDIR}/devel/cppunit
> -CONFIGURE_ARGS+=--with-cppunit-prefix=${LOCALBASE}
> -
> -regression-test: build
> - @cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} check || \
> - (${CAT} ${WRKSRC}/tests/test-suite.log; false)
> -.endif
> -
> .include <bsd.port.mk>
>
> Modified: head/devel/sdl2pp/Makefile
> ==============================================================================
> --- head/devel/sdl2pp/Makefile Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/devel/sdl2pp/Makefile Mon Sep 28 17:20:42 2015 (r398125)
> @@ -19,6 +19,7 @@ USES= compiler:c++11-lib cmake
> CMAKE_ARGS= -DSDL2PP_ENABLE_LIVE_TESTS=OFF \
> -DSDL2PP_WITH_WERROR=ON
> USE_SDL= sdl2 image2 mixer2 ttf2
> +TEST_TARGET= test
>
> PORTDOCS= *
>
> @@ -40,7 +41,4 @@ post-install:
> post-install-DOXYGEN-on:
> cd ${CONFIGURE_WRKSRC} && ${COPYTREE_SHARE} doxygen ${STAGEDIR}${DOCSDIR}/
>
> -regression-test: build
> - cd ${WRKSRC} && ${DO_MAKE_BUILD} test
> -
> .include <bsd.port.post.mk>
>
> Modified: head/games/spring/Makefile
> ==============================================================================
> --- head/games/spring/Makefile Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/games/spring/Makefile Mon Sep 28 17:20:42 2015 (r398125)
> @@ -52,6 +52,9 @@ LEI_PREFIX= ${LOCALBASE}
> # Do not exctract bundled copies of header files for 3rd-party packages:
> EXTRACT_AFTER_ARGS=--no-same-owner --no-same-permissions --exclude ${WRKSRC:T}/include
>
> +# The check-target fails right now: https://springrts.com/mantis/view.php?id=4736
> +TEST_TARGET= check
> +
> PORTDOCS= *
> PORTDATA= *
>
> @@ -75,10 +78,6 @@ CXXFLAGS+= -Wno-deprecated # Too much n
>
> PR_DOWNLOADER_LIB_DEPENDS=libcurl.so:${PORTSDIR}/ftp/curl
>
> -# The check-target fails right now: https://springrts.com/mantis/view.php?id=4736
> -check test xregression-test: build
> - ${MAKE} -C ${WRKSRC} check
> -
> .include <bsd.port.pre.mk>
>
> .if ${OPSYS} == FreeBSD && ${OSVERSION} < 1000000
>
> Modified: head/graphics/glosm/Makefile
> ==============================================================================
> --- head/graphics/glosm/Makefile Mon Sep 28 17:09:32 2015 (r398124)
> +++ head/graphics/glosm/Makefile Mon Sep 28 17:20:42 2015 (r398125)
> @@ -18,15 +18,13 @@ USE_GL= gl
> USE_SDL= sdl
> USE_GITHUB= yes
> GH_ACCOUNT= AMDmi3
> +TEST_TARGET= test
>
> PORTDOCS= README ChangeLog
>
> OPTIONS_DEFINE= DOCS
>
> -regression-test:
> - cd ${BUILD_WRKSRC} && ctest
> -
> -post-install:
> +post-install-DOCS-on:
> ${MKDIR} ${STAGEDIR}${DOCSDIR}
> .for f in ${PORTDOCS}
> ${INSTALL_DATA} ${WRKSRC}/${f} ${STAGEDIR}${DOCSDIR}/
>
More information about the svn-ports-head
mailing list