svn commit: r472710 - in head/sysutils: u-boot-a13-olinuxino u-boot-a64-olinuxino u-boot-bananapi u-boot-bananapim2 u-boot-beaglebone u-boot-chip u-boot-cubieboard u-boot-cubieboard2 u-boot-duovero...
Mark Linimon
linimon at FreeBSD.org
Mon Jun 18 19:51:29 UTC 2018
Author: linimon
Date: Mon Jun 18 19:51:23 2018
New Revision: 472710
URL: https://svnweb.freebsd.org/changeset/ports/472710
Log:
Update the instruction and description of the u-boot ports which use
u-boot-master.
Submitted by: manu
Differential Revision: D15883
Modified:
head/sysutils/u-boot-a13-olinuxino/pkg-descr
head/sysutils/u-boot-a64-olinuxino/pkg-descr
head/sysutils/u-boot-bananapi/pkg-descr
head/sysutils/u-boot-bananapim2/pkg-descr
head/sysutils/u-boot-beaglebone/pkg-descr
head/sysutils/u-boot-chip/pkg-descr
head/sysutils/u-boot-cubieboard/pkg-descr
head/sysutils/u-boot-cubieboard2/pkg-descr
head/sysutils/u-boot-duovero/pkg-descr
head/sysutils/u-boot-nanopi-m1plus/pkg-descr
head/sysutils/u-boot-nanopi-neo-air/pkg-descr
head/sysutils/u-boot-nanopi-neo/pkg-descr
head/sysutils/u-boot-olimex-a20-som-evb/pkg-descr
head/sysutils/u-boot-olinuxino-lime/pkg-descr
head/sysutils/u-boot-orangepi-one/pkg-descr
head/sysutils/u-boot-orangepi-pc/pkg-descr
head/sysutils/u-boot-orangepi-pc2/pkg-descr
head/sysutils/u-boot-orangepi-plus-2e/pkg-descr
head/sysutils/u-boot-orangepi-zero/pkg-descr
head/sysutils/u-boot-pandaboard/pkg-descr
head/sysutils/u-boot-pcduino3/pkg-descr
head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
head/sysutils/u-boot-zedboard/pkg-descr
head/sysutils/u-boot-zybo/pkg-descr
Modified: head/sysutils/u-boot-a13-olinuxino/pkg-descr
==============================================================================
--- head/sysutils/u-boot-a13-olinuxino/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-a13-olinuxino/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,16 +1,13 @@
U-Boot loader for A13 Olinuxino.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-a13-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-a13-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
- partition to address 0x42000000, and launches it. If ubldr.bin is
- not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-a64-olinuxino/pkg-descr
==============================================================================
--- head/sysutils/u-boot-a64-olinuxino/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-a64-olinuxino/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -4,6 +4,6 @@ To install this bootloader on an sdcard just do:
dd if=/usr/local/share/u-boot/u-boot-a64-olinuxino/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-bananapi/pkg-descr
==============================================================================
--- head/sysutils/u-boot-bananapi/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-bananapi/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Banana Pi.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-bananapi/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on Banana Pi, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-bananapim2/pkg-descr
==============================================================================
--- head/sysutils/u-boot-bananapim2/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-bananapim2/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Banana Pi M2.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-bananapim2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on Banana Pi, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-beaglebone/pkg-descr
==============================================================================
--- head/sysutils/u-boot-beaglebone/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-beaglebone/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -5,19 +5,10 @@ partition on an SD card or the eMMC. Normally this is
different partitions can be set with U-Boot environment variables.
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads ELF ubldr from file bbubldr on the FAT partition
- to address 0x88000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot scripts ) that loads ubldr.bin and execute it is included
-Note: prefixing the boot files with 'bb' allows building
-images with boot bits for more than one board.
-
For information about running FreeBSD on BeagleBone or BeagleBone Black, see
- https://wiki.freebsd.org/FreeBSD/arm/BeagleBone
+https://wiki.freebsd.org/FreeBSD/arm/BeagleBone
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-chip/pkg-descr
==============================================================================
--- head/sysutils/u-boot-chip/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-chip/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,16 +1,13 @@
U-Boot loader for NextThingCo CHIP.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-chip/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-chip/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
- partition to address 0x42000000, and launches it. If ubldr.bin is
- not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-cubieboard/pkg-descr
==============================================================================
--- head/sysutils/u-boot-cubieboard/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-cubieboard/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Cubieboard.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-cubieboard/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on Cubieboard, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-cubieboard2/pkg-descr
==============================================================================
--- head/sysutils/u-boot-cubieboard2/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-cubieboard2/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Cubieboard2.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-cubieboard2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr
- using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on Cubieboard, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-duovero/pkg-descr
==============================================================================
--- head/sysutils/u-boot-duovero/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-duovero/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -5,17 +5,10 @@ partition on an SD card. Normally this is partition 1,
partitions can be set with U-Boot environment variables.
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is passed to ubldr using the fdtfile env variable.
- The default is omap4-duovero-parlor.dtb for a Parlor expansion board.
- ubldr loads the DTB from /boot/dtb/ on the FreeBSD partition.
- (Not tested)
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
- to address 0x88000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Duovero, see
- https://wiki.freebsd.org/FreeBSD/arm/Duovero
+https://wiki.freebsd.org/FreeBSD/arm
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-nanopi-m1plus/pkg-descr
==============================================================================
--- head/sysutils/u-boot-nanopi-m1plus/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-nanopi-m1plus/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,16 +1,13 @@
U-Boot loader for NanoPi M1 Plus.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-m1plus/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
- partition to address 0x42000000, and launches it. If ubldr.bin is
- not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-nanopi-neo-air/pkg-descr
==============================================================================
--- head/sysutils/u-boot-nanopi-neo-air/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-nanopi-neo-air/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,16 +1,13 @@
U-Boot loader for NanoPi Neo Air.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-neo-air/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
- partition to address 0x42000000, and launches it. If ubldr.bin is
- not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-nanopi-neo/pkg-descr
==============================================================================
--- head/sysutils/u-boot-nanopi-neo/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-nanopi-neo/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,16 +1,13 @@
U-Boot loader for NanoPi Neo.
-To install this bootloader, follow the instructions in
- http://linux-sunxi.org/Bootable_SD_card#Bootloader
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-nanopi-neo/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The distroboot command knows how to load FreeBSD loader(8)
- * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT
- partition to address 0x42000000, and launches it. If ubldr.bin is
- not found, it falls back on ubldr
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
-For information about running FreeBSD on NanoPi Neo, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+For information about running FreeBSD on Allwinner boards, see
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-olimex-a20-som-evb/pkg-descr
==============================================================================
--- head/sysutils/u-boot-olimex-a20-som-evb/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-olimex-a20-som-evb/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Olimex A20 SOM EVB.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-olimex-a20-som-evb/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-olimex-a20-som-evb/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-olinuxino-lime/pkg-descr
==============================================================================
--- head/sysutils/u-boot-olinuxino-lime/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-olinuxino-lime/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Olinuxino Lime.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-olinuxino-lime/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-olinuxino-lime/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-orangepi-one/pkg-descr
==============================================================================
--- head/sysutils/u-boot-orangepi-one/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-orangepi-one/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for OrangePi One.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-one/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-one/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-orangepi-pc/pkg-descr
==============================================================================
--- head/sysutils/u-boot-orangepi-pc/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-orangepi-pc/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,9 +1,13 @@
U-Boot loader and related files for the OrangePi PC
-To install this bootloader on an sdcard just do:
-dd if=/usr/local/share/u-boot/u-boot-orangepi-pc/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+To install this bootloader on an sdcard just do :
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-pc/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+This version is patched so that:
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
+
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-orangepi-pc2/pkg-descr
==============================================================================
--- head/sysutils/u-boot-orangepi-pc2/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-orangepi-pc2/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,9 +1,9 @@
U-Boot loader and related files for the OrangePi PC2
To install this bootloader on an sdcard just do:
-dd if=/usr/local/share/u-boot/u-boot-orangepi-pc2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-pc2/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-orangepi-plus-2e/pkg-descr
==============================================================================
--- head/sysutils/u-boot-orangepi-plus-2e/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-orangepi-plus-2e/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,20 +1,13 @@
U-Boot loader for OrangePi Plus2E.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin \
- of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-plus-2e/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-orangepi-zero/pkg-descr
==============================================================================
--- head/sysutils/u-boot-orangepi-zero/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-orangepi-zero/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for OrangePi Zero.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-orangepi-zero/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-orangepi-zero/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-pandaboard/pkg-descr
==============================================================================
--- head/sysutils/u-boot-pandaboard/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-pandaboard/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -5,17 +5,10 @@ partition on an SD card. Normally this is partition 1
partitions can be set with U-Boot environment variables.
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file uboot.env on the FAT partition.
- * The DTB file name is passed to ubldr using the fdtfile env variable.
- It defaults to omap4-panda.dtb unless you override it. ubldr loads
- the DTB from /boot/dtb/ on the FreeBSD partition.
- (Not tested)
- * By default, it loads ELF ubldr from file ubldr on the FAT partition
- to address 0x88000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot scripts ) that loads ubldr.bin and execute it is included
For information about running FreeBSD on the PandaBoard, see
- https://wiki.freebsd.org/FreeBSD/arm/PandaBoard
+https://wiki.freebsd.org/FreeBSD/arm/PandaBoard
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-pcduino3/pkg-descr
==============================================================================
--- head/sysutils/u-boot-pcduino3/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-pcduino3/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for pcDuino3
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-pcduino3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-pcduino3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr
==============================================================================
--- head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-sinovoip-bpi-m3/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -1,19 +1,13 @@
U-Boot loader for Banana Pi M3.
To install this bootloader on an sdcard just do :
-dd if=/usr/local/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+dd if=$LOCALBASE/share/u-boot/u-boot-sinovoip-bpi-m3/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=sync
This version is patched so that:
- * ELF and API features are enabled.
- * The default environment is trimmed to just what's needed to boot.
- * The saveenv command writes to the file u-boot.env on the FAT partition.
- * The DTB file name is chosen based on the board model and passed to ubldr.bin
- using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
- the FreeBSD partition.
- * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
- to address 0x42000000, and launches it.
+ * API features are enabled.
+ * A boot.scr (U-Boot script) that loads ubldr.bin and execute it is included
For information about running FreeBSD on Allwinner boards, see
- https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+https://wiki.freebsd.org/FreeBSD/arm/Allwinner
-For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
+WWW: http://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-zedboard/pkg-descr
==============================================================================
--- head/sysutils/u-boot-zedboard/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-zedboard/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -3,10 +3,10 @@ U-Boot loader for the Xilinx Zynq-based Zedboard.
To install this bootloader, copy the files in the share/u-boot/u-boot-zedboard
directory to the first partition, formatted as FAT16 or FAT32, on an SD card.
-This version is patched as follows:
- * ELF and API features are enabled.
+This version is patched so that:
+ * API features are enabled.
For information about running FreeBSD on Xilinx Zynq SoCs, see
-WWW: https://wiki.freebsd.org/FreeBSD/arm/Zedboard
+https://wiki.freebsd.org/FreeBSD/arm/Zedboard
-For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot
+WWW: https://www.denx.de/wiki/U-Boot
Modified: head/sysutils/u-boot-zybo/pkg-descr
==============================================================================
--- head/sysutils/u-boot-zybo/pkg-descr Mon Jun 18 19:50:41 2018 (r472709)
+++ head/sysutils/u-boot-zybo/pkg-descr Mon Jun 18 19:51:23 2018 (r472710)
@@ -3,10 +3,10 @@ U-Boot loader for the Xilinx Zynq-based Zedboard.
To install this bootloader, copy the files in the share/u-boot/u-boot-zedboard
directory to the first partition, formatted as FAT16 or FAT32, on an SD card.
-This version is patched as follows:
- * ELF and API features are enabled.
+This version is patched so that:
+ * API features are enabled.
For information about running FreeBSD on Xilinx Zynq SoCs, see
-WWW: https://wiki.freebsd.org/FreeBSD/arm/Zedboard
+https://wiki.freebsd.org/FreeBSD/arm/Zedboard
-For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot
+WWW: https://www.denx.de/wiki/U-Boot
More information about the svn-ports-all
mailing list