svn commit: r408645 - in head/cad/p5-Verilog-Perl: . files
Kurt Jaeger
pi at FreeBSD.org
Wed Feb 10 19:34:26 UTC 2016
Author: pi
Date: Wed Feb 10 19:34:24 2016
New Revision: 408645
URL: https://svnweb.freebsd.org/changeset/ports/408645
Log:
cad/p5-Verilog-Perl: 3.404 -> 3.418
Changes:
http://cpansearch.perl.org/src/WSNYDER/Verilog-Perl-3.418/Changes
Removed dependency of gcc. Now, p5-Verilog-Perl compiles with clang.
PR: 207050
Submitted by: otacilio.neto at ee.ufcg.edu.br (maintainer)
Modified:
head/cad/p5-Verilog-Perl/Makefile
head/cad/p5-Verilog-Perl/distinfo
head/cad/p5-Verilog-Perl/files/patch-Makefile.PL
head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL
head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL
head/cad/p5-Verilog-Perl/pkg-plist
Modified: head/cad/p5-Verilog-Perl/Makefile
==============================================================================
--- head/cad/p5-Verilog-Perl/Makefile Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/Makefile Wed Feb 10 19:34:24 2016 (r408645)
@@ -1,9 +1,8 @@
-# Created by: Otacilio de Araujo Ramos Neto <otacilio.neto at ee.ufcg.edu.br>
+# Created by: Otacilio de Araujo Ramos Neto <otacilio.neto at bsd.com.br>
# $FreeBSD$
PORTNAME= Verilog-Perl
-PORTVERSION= 3.404
-PORTREVISION= 1
+PORTVERSION= 3.418
CATEGORIES= cad perl5
MASTER_SITES= CPAN
PKGNAMEPREFIX= p5-
@@ -15,7 +14,6 @@ BUILD_DEPENDS= flex>=2.5.35:${PORTSDIR}/
USES= bison gmake perl5
USE_PERL5= configure
-USE_GCC= any
CONFIGURE_ENV= CXX=${CXX}\
CPP=${CPP}\
CC=${CC}
Modified: head/cad/p5-Verilog-Perl/distinfo
==============================================================================
--- head/cad/p5-Verilog-Perl/distinfo Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/distinfo Wed Feb 10 19:34:24 2016 (r408645)
@@ -1,2 +1,2 @@
-SHA256 (Verilog-Perl-3.404.tar.gz) = 4eddc21a965019eecc2200e251186f9d8bd0643485d12feda7d0b26a328650d0
-SIZE (Verilog-Perl-3.404.tar.gz) = 558496
+SHA256 (Verilog-Perl-3.418.tar.gz) = 19eb60cb211fe6dbe6f9705f973e72c9ffd370399c39f0871652d4bee61492e8
+SIZE (Verilog-Perl-3.418.tar.gz) = 562256
Modified: head/cad/p5-Verilog-Perl/files/patch-Makefile.PL
==============================================================================
--- head/cad/p5-Verilog-Perl/files/patch-Makefile.PL Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/files/patch-Makefile.PL Wed Feb 10 19:34:24 2016 (r408645)
@@ -1,6 +1,6 @@
---- Makefile.PL 2014-03-11 19:59:40.000000000 -0300
-+++ Makefile.PL 2014-06-25 11:18:59.000000000 -0300
-@@ -11,7 +11,7 @@
+--- Makefile.PL.orig 2016-02-02 23:36:13 UTC
++++ Makefile.PL
+@@ -11,7 +11,7 @@ use Config;
sub MY::postamble {
my $out="";
@@ -8,8 +8,8 @@
+ # Note OPTIMIZE is passed from upper gmakefile, so this code needed there too.
# -O2 optimization seems unreasonably slow on nearly every platform. I give up.
my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g;
- $out .= "OPTIMIZE = $optimize\n";
-@@ -82,6 +82,8 @@
+ # pass hardening flags
+@@ -86,6 +86,8 @@ cppcheck: $(CPPCHECK_DEP)
return $out;
}
@@ -18,7 +18,7 @@
my $fail;
local $! = undef;
my $have_gen = -d "Preproc/gen";
-@@ -93,7 +95,7 @@
+@@ -97,7 +99,7 @@ my $have_gen = -d "Preproc/gen";
if ($have_gen) { warn "\n-Note: 'bison' must be installed to build from sources\n"; }
else { $fail=1; warn "\n%Error: 'bison' must be installed to build\n\n"; }
}
@@ -27,7 +27,7 @@
if ($fail) {
if ($ENV{AUTOMATED_TESTING}) {
exit(0);
-@@ -135,8 +137,8 @@
+@@ -139,7 +141,7 @@ WriteMakefile(
},
);
@@ -36,4 +36,3 @@
if ($? || $mkv !~ /GNU Make/i) {
warn "-Important: Now type 'gmake MAKE=gmake' as this package requires GNU Make\n";
}
- 1;
Modified: head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL
==============================================================================
--- head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL Wed Feb 10 19:34:24 2016 (r408645)
@@ -1,6 +1,6 @@
---- Parser/Makefile.PL 2014-03-11 19:59:40.000000000 -0300
-+++ Parser/Makefile.PL 2014-06-25 11:19:19.000000000 -0300
-@@ -9,13 +9,15 @@
+--- Parser/Makefile.PL.orig 2016-02-02 23:36:13 UTC
++++ Parser/Makefile.PL
+@@ -9,13 +9,15 @@ use Config;
sub MY::postamble {
my $out;
@@ -17,7 +17,7 @@
}
# Note OPTIMIZE is passed from upper makefile, so this code needed there too.
my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g;
-@@ -46,7 +48,7 @@
+@@ -50,7 +52,7 @@ sub MY::postamble {
$out .= "${cmt}CFLAGS += -DFLEX_DEBUG\n";
$out .= "LEXFLAGS += -d\n";
$out .= '
Modified: head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL
==============================================================================
--- head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL Wed Feb 10 19:34:24 2016 (r408645)
@@ -1,6 +1,6 @@
---- Preproc/Makefile.PL 2014-03-11 19:59:40.000000000 -0300
-+++ Preproc/Makefile.PL 2014-06-25 11:19:37.000000000 -0300
-@@ -9,13 +9,14 @@
+--- Preproc/Makefile.PL.orig 2016-02-02 23:36:13 UTC
++++ Preproc/Makefile.PL
+@@ -9,13 +9,14 @@ use Config;
sub MY::postamble {
my $out;
@@ -16,7 +16,7 @@
}
# Note OPTIMIZE is passed from upper makefile, so this code needed there too.
my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g;
-@@ -46,7 +47,7 @@
+@@ -50,7 +51,7 @@ sub MY::postamble {
$out .= "${cmt}CFLAGS += -DFLEX_DEBUG\n";
$out .= "${cmt}LEXFLAGS += -d\n";
$out .= '
Modified: head/cad/p5-Verilog-Perl/pkg-plist
==============================================================================
--- head/cad/p5-Verilog-Perl/pkg-plist Wed Feb 10 19:11:22 2016 (r408644)
+++ head/cad/p5-Verilog-Perl/pkg-plist Wed Feb 10 19:34:24 2016 (r408645)
@@ -3,27 +3,6 @@ bin/vpassert
bin/vppreproc
bin/vrename
bin/vsplitmodule
-%%PERL5_MAN3%%/Verilog::EditFiles.3.gz
-%%PERL5_MAN3%%/Verilog::Getopt.3.gz
-%%PERL5_MAN3%%/Verilog::Language.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Cell.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::ContAssign.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Defparam.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::File.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Interface.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Logger.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::ModPort.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Module.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Net.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Pin.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Port.3.gz
-%%PERL5_MAN3%%/Verilog::Netlist::Subclass.3.gz
-%%PERL5_MAN3%%/Verilog::Parser.3.gz
-%%PERL5_MAN3%%/Verilog::Preproc.3.gz
-%%PERL5_MAN3%%/Verilog::SigParser.3.gz
-%%PERL5_MAN3%%/Verilog::Std.3.gz
-%%PERL5_MAN3%%/Verilog::Verilog-Perl.3.gz
%%SITE_ARCH%%/Verilog/EditFiles.pm
%%SITE_ARCH%%/Verilog/Getopt.pm
%%SITE_ARCH%%/Verilog/Language.pm
@@ -51,3 +30,24 @@ bin/vsplitmodule
%%PERL5_MAN1%%/vpassert.1.gz
%%PERL5_MAN1%%/vppreproc.1.gz
%%PERL5_MAN1%%/vrename.1.gz
+%%PERL5_MAN3%%/Verilog::EditFiles.3.gz
+%%PERL5_MAN3%%/Verilog::Getopt.3.gz
+%%PERL5_MAN3%%/Verilog::Language.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Cell.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::ContAssign.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Defparam.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::File.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Interface.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Logger.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::ModPort.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Module.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Net.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Pin.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Port.3.gz
+%%PERL5_MAN3%%/Verilog::Netlist::Subclass.3.gz
+%%PERL5_MAN3%%/Verilog::Parser.3.gz
+%%PERL5_MAN3%%/Verilog::Preproc.3.gz
+%%PERL5_MAN3%%/Verilog::SigParser.3.gz
+%%PERL5_MAN3%%/Verilog::Std.3.gz
+%%PERL5_MAN3%%/Verilog::Verilog-Perl.3.gz
More information about the svn-ports-all
mailing list