svn commit: r44890 - head/en_US.ISO8859-1/books/handbook/bsdinstall
Dru Lavigne
dru at FreeBSD.org
Tue May 20 20:46:30 UTC 2014
Author: dru
Date: Tue May 20 20:46:29 2014
New Revision: 44890
URL: http://svnweb.freebsd.org/changeset/doc/44890
Log:
White space fix only. Translators can ignore.
Sponsored by: iXsystems
Modified:
head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
Modified: head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Tue May 20 20:08:17 2014 (r44889)
+++ head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Tue May 20 20:46:29 2014 (r44890)
@@ -80,22 +80,21 @@
program used by &os; 8.x, is covered in <xref
linkend="install"/>.</para>
- <para>In general, the installation instructions in this chapter are written
- for the &i386; and <acronym>AMD64</acronym> architectures.
- Where applicable, instructions specific to other
- platforms will be listed. There may be minor differences
- between the installer and what is shown here, so use this
- chapter as a general guide rather than as a set of literal
- instructions.</para>
+ <para>In general, the installation instructions in this chapter
+ are written for the &i386; and <acronym>AMD64</acronym>
+ architectures. Where applicable, instructions specific to other
+ platforms will be listed. There may be minor differences
+ between the installer and what is shown here, so use this
+ chapter as a general guide rather than as a set of literal
+ instructions.</para>
<note>
<para>Users who prefer to install &os; using a graphical
- installer may be interested in
+ installer may be interested in
<application>pc-sysinstall</application>, the installer used
- by the
- PC-BSD Project. It can be used to install either a graphical
- desktop (PC-BSD) or a command line version of &os;. Refer to
- the PC-BSD Users Handbook for details (<link
+ by the PC-BSD Project. It can be used to install either a
+ graphical desktop (PC-BSD) or a command line version of &os;.
+ Refer to the PC-BSD Users Handbook for details (<link
xlink:href="http://wiki.pcbsd.org/index.php/PC-BSD%C2%AE_Users_Handbook/10.1">http://wiki.pcbsd.org/index.php/PC-BSD%C2%AE_Users_Handbook/10.1</link>).</para>
</note>
@@ -141,135 +140,136 @@
<sect1 xml:id="bsdinstall-hardware">
<title>Minimum Hardware Requirements</title>
- <para>The hardware requirements to install &os; vary by the
- &os; version and the hardware architecture. Hardware
- architectures and devices supported by a &os;
- release are listed in the Hardware Notes file. Usually named
- <filename>HARDWARE.TXT</filename>, the file is located in the
- root directory of the release media. Copies of the supported
- hardware list are also available on the Release Information
- page of the &os; web site (<link
- xlink:href="&url.base;/releases/index.html">http://www.FreeBSD.org/releases/index.html</link>).</para>
-
- <para>A &os; installation will require at least 64 MB of
- <acronym>RAM</acronym> and 1.1 GB of free hard drive
- space for the most minimal installation. However, that is a
- <emphasis>very</emphasis> minimal install, leaving almost no
- free space. A more realistic minimum is 3 GB without a
- graphical environment, and 5 GB or more if a graphical
- user interface will be used. Third-party application
- software requires more space. It is recommended to
- increase <acronym>RAM</acronym> and hard drive space to meet
- the needs of the applications that will be used and the amount
- of data that will be stored.</para>
+ <para>The hardware requirements to install &os; vary by the &os;
+ version and the hardware architecture. Hardware architectures
+ and devices supported by a &os; release are listed in the
+ Hardware Notes file. Usually named
+ <filename>HARDWARE.TXT</filename>, the file is located in the
+ root directory of the release media. Copies of the supported
+ hardware list are also available on the Release Information page
+ of the &os; web site (<link
+ xlink:href="&url.base;/releases/index.html">http://www.FreeBSD.org/releases/index.html</link>).</para>
+
+ <para>A &os; installation will require at least 64 MB of
+ <acronym>RAM</acronym> and 1.1 GB of free hard drive space
+ for the most minimal installation. However, that is a
+ <emphasis>very</emphasis> minimal install, leaving almost no
+ free space. A more realistic minimum is 3 GB without a
+ graphical environment, and 5 GB or more if a graphical user
+ interface will be used. Third-party application software
+ requires more space. It is recommended to increase
+ <acronym>RAM</acronym> and hard drive space to meet the needs of
+ the applications that will be used and the amount of data that
+ will be stored.</para>
- <para>The processor requirements for
- each architecture can be summarized as follows:</para>
+ <para>The processor requirements for each architecture can be
+ summarized as follows:</para>
- <variablelist>
+ <variablelist>
<varlistentry>
<term>&arch.amd64;</term>
<listitem>
- <para>There are two classes of processors capable of running
- &arch.amd64;. The first are <acronym>AMD64</acronym> processors,
- including the &amd.athlon;64 and
- &amd.opteron; processors.</para>
-
- <para>The second class of processors includes those using the
- &intel; EM64T architecture. Examples of these
- processors include all multi-core &intel; &xeon;
- processors except Sossaman, the single-core
- &intel; &xeon; processors Nocona, Irwindale, Potomac,
- and Cranford, the &intel; &core; 2 (not Core Duo)
- and later processors, all &intel; &pentium; D processors, the
- &intel; &pentium; 4s and Celeron Ds using the Cedar
- Mill core, and some &intel; &pentium; 4s and Celeron Ds
- using the Prescott core.</para>
-
- <para>Both Uniprocessor (<acronym>UP</acronym>) and Symmetric
- Multi-processor (<acronym>SMP</acronym>) configurations are
- supported.</para>
- </listitem>
+ <para>There are two classes of processors capable of running
+ &arch.amd64;. The first are <acronym>AMD64</acronym>
+ processors, including the &amd.athlon;64 and &amd.opteron;
+ processors.</para>
+
+ <para>The second class of processors includes those using
+ the &intel; EM64T architecture. Examples of these
+ processors include all multi-core &intel; &xeon;
+ processors except Sossaman, the single-core
+ &intel; &xeon; processors Nocona, Irwindale, Potomac,
+ and Cranford, the &intel; &core; 2 (not Core
+ Duo) and later processors, all &intel; &pentium; D
+ processors, the &intel; &pentium; 4s and Celeron Ds
+ using the Cedar Mill core, and some &intel; &pentium;
+ 4s and Celeron Ds using the Prescott core.</para>
+
+ <para>Both Uniprocessor (<acronym>UP</acronym>) and
+ Symmetric Multi-processor (<acronym>SMP</acronym>)
+ configurations are supported.</para>
+ </listitem>
</varlistentry>
- <varlistentry>
- <term>&arch.i386;</term>
- <listitem>
- <para>Almost all i386-compatible processors with a floating
- point unit are supported. All &intel; processors
- 486 or higher are supported.</para>
-
- <para>&os; will take advantage of Physical Address Extensions
- (<acronym>PAE</acronym>) support on <acronym>CPU</acronym>s
- that support this feature. A kernel with the
- <acronym>PAE</acronym> feature enabled will detect memory
- above 4 GB and allow it to be used by the system.
- This feature places constraints on the device drivers and
- other features of &os; which may be used; refer to
- &man.pae.4; for details.</para>
-
+ <varlistentry>
+ <term>&arch.i386;</term>
+ <listitem>
+ <para>Almost all i386-compatible processors with a floating
+ point unit are supported. All &intel; processors 486 or
+ higher are supported.</para>
+
+ <para>&os; will take advantage of Physical Address
+ Extensions (<acronym>PAE</acronym>) support on
+ <acronym>CPU</acronym>s that support this feature. A
+ kernel with the <acronym>PAE</acronym> feature enabled
+ will detect memory above 4 GB and allow it to be used
+ by the system. This feature places constraints on the
+ device drivers and other features of &os; which may be
+ used; refer to &man.pae.4; for details.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>ia64</term>
<listitem>
- <para>Currently supported processors are the &itanium; and the
- &itanium; 2. Supported chipsets include the HP zx1, &intel;
- 460GX, and &intel; E8870. Both Uniprocessor
- (<acronym>UP</acronym>) and Symmetric Multi-processor
- (<acronym>SMP</acronym>) configurations are supported.</para>
- </listitem>
+ <para>Currently supported processors are the &itanium; and
+ the &itanium; 2. Supported chipsets include the HP zx1,
+ &intel; 460GX, and &intel; E8870. Both Uniprocessor
+ (<acronym>UP</acronym>) and Symmetric Multi-processor
+ (<acronym>SMP</acronym>) configurations are
+ supported.</para>
+ </listitem>
</varlistentry>
<varlistentry>
<term>pc98</term>
<listitem>
- <para>NEC PC-9801/9821 series with almost all i386-compatible
- processors, including 80486, &pentium;, &pentium; Pro, and
- &pentium; II, are all supported. All i386-compatible processors
- by AMD, Cyrix, IBM, and IDT are also supported. EPSON
- PC-386/486/586 series, which are compatible with NEC PC-9801
- series, are supported. The NEC FC-9801/9821 and NEC SV-98
- series should be supported.</para>
-
- <para>High-resolution mode is not supported. NEC
- PC-98XA/XL/RL/XL^2, and NEC PC-H98 series are supported in
- normal (PC-9801 compatible) mode only. The
- <acronym>SMP</acronym>-related features of &os; are not
- supported. The New Extend Standard Architecture
- (<acronym>NESA</acronym>) bus used in the PC-H98, SV-H98,
- and FC-H98 series, is not supported. </para>
- </listitem>
+ <para>NEC PC-9801/9821 series with almost all
+ i386-compatible processors, including 80486, &pentium;,
+ &pentium; Pro, and &pentium; II, are all supported. All
+ i386-compatible processors by AMD, Cyrix, IBM, and IDT are
+ also supported. EPSON PC-386/486/586 series, which are
+ compatible with NEC PC-9801 series, are supported. The
+ NEC FC-9801/9821 and NEC SV-98 series should be
+ supported.</para>
+
+ <para>High-resolution mode is not supported. NEC
+ PC-98XA/XL/RL/XL^2, and NEC PC-H98 series are supported in
+ normal (PC-9801 compatible) mode only. The
+ <acronym>SMP</acronym>-related features of &os; are not
+ supported. The New Extend Standard Architecture
+ (<acronym>NESA</acronym>) bus used in the PC-H98, SV-H98,
+ and FC-H98 series, is not supported.</para>
+ </listitem>
</varlistentry>
<varlistentry>
<term>&arch.powerpc;</term>
<listitem>
- <para>All New World <acronym>ROM</acronym> &apple; &macintosh; systems with built-in
- <acronym>USB</acronym> are supported.
- <acronym>SMP</acronym> is supported on machines with
- multiple <acronym>CPU</acronym>s.</para>
+ <para>All New World <acronym>ROM</acronym> &apple;
+ &macintosh; systems with built-in <acronym>USB</acronym>
+ are supported. <acronym>SMP</acronym> is supported on
+ machines with multiple <acronym>CPU</acronym>s.</para>
- <para>A 32-bit kernel can only use the first 2 GB of
- <acronym>RAM</acronym>.</para>
- </listitem>
+ <para>A 32-bit kernel can only use the first 2 GB of
+ <acronym>RAM</acronym>.</para>
+ </listitem>
</varlistentry>
- <varlistentry>
+ <varlistentry>
<term>&arch.sparc64;</term>
<listitem>
- <para>Systems supported by &os;/&arch.sparc64; are listed at
- the FreeBSD/sparc64 Project (<link
- xlink:href="&url.base;/platforms/sparc.html">http://www.freebsd.org/platforms/sparc.html</link>).</para>
-
- <para><acronym>SMP</acronym> is supported on all systems with
- more than 1 processor. A dedicated disk is required as
- it is not possible to share a disk with another operating
- system at this time.</para>
- </listitem>
- </varlistentry>
- </variablelist>
+ <para>Systems supported by &os;/&arch.sparc64; are listed at
+ the FreeBSD/sparc64 Project (<link
+ xlink:href="&url.base;/platforms/sparc.html">http://www.freebsd.org/platforms/sparc.html</link>).</para>
+
+ <para><acronym>SMP</acronym> is supported on all systems
+ with more than 1 processor. A dedicated disk is required
+ as it is not possible to share a disk with another
+ operating system at this time.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
</sect1>
<sect1 xml:id="bsdinstall-pre">
@@ -283,38 +283,40 @@
checklist:</para>
<procedure>
- <step>
- <title>Back Up Important Data</title>
+ <step>
+ <title>Back Up Important Data</title>
- <para>Before installing any operating system,
- <emphasis>always</emphasis> backup all important data first.
- Do not store the backup on the system being installed.
- Instead, save the data to a removable disk such as a
- <acronym>USB</acronym> drive, another system on the network,
- or an online backup service. Test the backup before
- starting the installation to make sure it contains all of the
- needed files. Once the installer formats the system's disk,
- all data stored on that disk will be lost.</para>
- </step>
-
- <step>
- <title>Decide Where to Install &os;</title>
-
- <para>If &os; will be the only operating system installed, this
- step can be skipped. But if &os; will share the disk with
- another operating system, decide which disk or partition will
- be used for &os;.</para>
+ <para>Before installing any operating system,
+ <emphasis>always</emphasis> backup all important data first.
+ Do not store the backup on the system being installed.
+ Instead, save the data to a removable disk such as a
+ <acronym>USB</acronym> drive, another system on the network,
+ or an online backup service. Test the backup before
+ starting the installation to make sure it contains all of
+ the needed files. Once the installer formats the system's
+ disk, all data stored on that disk will be lost.</para>
+ </step>
+
+ <step>
+ <title>Decide Where to Install &os;</title>
+
+ <para>If &os; will be the only operating system installed,
+ this step can be skipped. But if &os; will share the disk
+ with another operating system, decide which disk or
+ partition will be used for &os;.</para>
<para>In the &arch.i386; and &arch.amd64; architectures, disks
can be divided into multiple partitions using one of two
- partitioning schemes. A traditional <firstterm>Master Boot Record</firstterm>
- (<acronym>MBR</acronym>) holds a partition table defining up
- to four <firstterm>primary partitions</firstterm>. For
- historical reasons, &os; calls these primary partitions
- <firstterm>slices</firstterm>. One of these
- primary partitions can be made into an <firstterm>extended
- partition</firstterm> containing multiple <firstterm>logical
- partitions</firstterm>. The <firstterm>GUID Partition Table</firstterm>
+ partitioning schemes. A traditional <firstterm>Master Boot
+ Record</firstterm> (<acronym>MBR</acronym>) holds a
+ partition table defining up to four <firstterm>primary
+ partitions</firstterm>. For historical reasons, &os;
+ calls these primary partition
+ <firstterm>slices</firstterm>. One of these primary
+ partitions can be made into an <firstterm>extended
+ partition</firstterm> containing multiple
+ <firstterm>logical partitions</firstterm>. The
+ <firstterm>GUID Partition Table</firstterm>
(<acronym>GPT</acronym>) is a newer and simpler method of
partitioning a disk. Common <acronym>GPT</acronym>
implementations allow up to 128 partitions per disk,
@@ -344,84 +346,86 @@
is a free live <acronym>CD</acronym> which includes the
<application>GParted</application> partition editor.
<application>GParted</application> is also included with
- many other Linux live <acronym>CD</acronym> distributions.</para>
+ many other Linux live <acronym>CD</acronym>
+ distributions.</para>
<warning>
<para>When used properly, disk shrinking utilities can
- safely create space for creating a new partition.
- Since the possibility of selecting the wrong partition
- exists, always backup any important data
- and verify the integrity of the backup before modifying disk
- partitions.</para>
+ safely create space for creating a new partition. Since
+ the possibility of selecting the wrong partition exists,
+ always backup any important data and verify the integrity
+ of the backup before modifying disk partitions.</para>
</warning>
<para>Disk partitions containing different operating systems
- make it possible to install multiple operating systems on one computer.
- An alternative is to use virtualization (<xref
- linkend="virtualization"/>) which allows
- multiple operating systems to run at the same time without
- modifying any disk partitions.</para>
- </step>
-
- <step>
- <title>Collect Network Information</title>
-
- <para>Some &os; installation methods require a network connection
- in order to download the installation files. After any
- installation, the installer will offer to setup the system's
- network interfaces.</para>
+ make it possible to install multiple operating systems on
+ one computer. An alternative is to use virtualization
+ (<xref linkend="virtualization"/>) which allows multiple
+ operating systems to run at the same time without modifying
+ any disk partitions.</para>
+ </step>
+
+ <step>
+ <title>Collect Network Information</title>
+
+ <para>Some &os; installation methods require a network
+ connection in order to download the installation files.
+ After any installation, the installer will offer to setup
+ the system's network interfaces.</para>
+
+ <para>If the network has a <acronym>DHCP</acronym> server, it
+ can be used to provide automatic network configuration. If
+ <acronym>DHCP</acronym> is not available, the follwoing
+ network information for the system must be obtained from the
+ local network administrator or Internet service
+ provider:</para>
- <para>If the network has a <acronym>DHCP</acronym> server, it can be used to provide
- automatic network configuration. If <acronym>DHCP</acronym>
- is not available, the follwoing network information for the system must be obtained
- from the local network administrator or Internet service
- provider:</para>
+ <orderedlist xml:id="bsdinstall-collect-network-information">
+ <title>Required Network Information</title>
- <orderedlist xml:id="bsdinstall-collect-network-information">
- <title>Required Network Information</title>
-
- <listitem>
- <para><acronym>IP</acronym>
- address</para>
- </listitem>
-
- <listitem>
- <para>Subnet mask</para>
- </listitem>
+ <listitem>
+ <para><acronym>IP</acronym> address</para>
+ </listitem>
- <listitem>
- <para><acronym>IP</acronym> address of default
- gateway</para>
- </listitem>
+ <listitem>
+ <para>Subnet mask</para>
+ </listitem>
- <listitem>
- <para>Domain name of the network</para>
- </listitem>
+ <listitem>
+ <para><acronym>IP</acronym> address of default
+ gateway</para>
+ </listitem>
- <listitem>
- <para><acronym>IP</acronym> addresses of the network's
- <acronym>DNS</acronym> servers</para>
- </listitem>
- </orderedlist>
- </step>
+ <listitem>
+ <para>Domain name of the network</para>
+ </listitem>
- <step>
- <title>Check for &os; Errata</title>
+ <listitem>
+ <para><acronym>IP</acronym> addresses of the network's
+ <acronym>DNS</acronym> servers</para>
+ </listitem>
+ </orderedlist>
+ </step>
+
+ <step>
+ <title>Check for &os; Errata</title>
+
+ <para>Although the &os; Project strives to ensure that
+ each release of &os; is as stable as possible, bugs
+ occasionally creep into the process. On very rare occasions
+ those bugs affect the installation process. As these
+ problems are discovered and fixed, they are noted in the
+ &os; Errata (<link
+ xlink:href="&url.base;/releases/&rel.current;R/errata.html">http://www.freebsd.org/releases/&rel.current;R/errata.html</link>)
+ on the &os; web site. Check the errata before installing to
+ make sure that there are no problems that might affect the
+ installation.</para>
- <para>Although the &os; Project strives to ensure that each
- release of &os; is as stable as possible, bugs occasionally
- creep into the process. On very rare occasions those bugs
- affect the installation process. As these problems are
- discovered and fixed, they are noted in the &os; Errata (<link
- xlink:href="&url.base;/releases/&rel.current;R/errata.html">http://www.freebsd.org/releases/&rel.current;R/errata.html</link>)
- on the &os; web site. Check the errata before installing to
- make sure that there are no problems that might affect the
- installation.</para>
-
- <para>Information and errata for all the releases can be found
- on the release information section of the &os; web site (<link
- xlink:href="&url.base;/releases/index.html">http://www.freebsd.org/releases/index.html</link>).</para>
- </step>
+ <para>Information and errata for all the releases can be found
+ on the release information section of the &os; web site
+ (<link
+ xlink:href="&url.base;/releases/index.html">http://www.freebsd.org/releases/index.html</link>).</para>
+ </step>
</procedure>
<sect2 xml:id="bsdinstall-installation-media">
@@ -620,131 +624,125 @@ commit your changes?</programlisting>
configure the system to boot from the inserted media depends
upon the architecture.</para>
- <sect2 xml:id="bsdinstall-starting-i386">
- <title>Booting on &i386; and &arch.amd64;</title>
+ <sect2 xml:id="bsdinstall-starting-i386">
+ <title>Booting on &i386; and &arch.amd64;</title>
- <para>These architectures provide a
- <acronym>BIOS</acronym> menu for selecting the
- boot device. Depending upon the installation media
- being used, select the
- <acronym>CD</acronym>/<acronym>DVD</acronym> or
- <acronym>USB</acronym> device as the first boot device.
- Most systems also
- provide a key for selecting the boot device during
- startup without having to enter the <acronym>BIOS</acronym>.
- Typically, the key is either <keycap>F10</keycap>,
- <keycap>F11</keycap>, <keycap>F12</keycap>, or
- <keycap>Escape</keycap>.</para>
-
- <para>If the computer loads the
- existing operating system instead of the &os; installer, then either:</para>
-
- <orderedlist>
- <listitem>
- <para>The installation media was not inserted early enough in the
- boot process. Leave the media inserted and try restarting the
- computer.</para>
- </listitem>
-
- <listitem>
- <para>The <acronym>BIOS</acronym> changes were incorrect or not saved.
- Double-check that the right boot device
- is selected as the first boot device.</para>
- </listitem>
-
- <listitem>
- <para>This system is too old to
- support booting from the chosen media. In this case, the
- <application>Plop Boot Manager</application> (<link
- xlink:href="http://www.plop.at/en/bootmanager.html">http://www.plop.at/en/bootmanager.html</link>)
- can be used to boot the system from the selected
- media.</para>
- </listitem>
- </orderedlist>
- </sect2>
-
- <sect2>
- <title>Booting on &powerpc;</title>
-
- <para>On most machines, holding <keycap>C</keycap> on the
- keyboard during boot will boot from the
- <acronym>CD</acronym>. Otherwise, hold
- <keycombo action="simul">
- <keycap>Command</keycap>
- <keycap>Option</keycap>
- <keycap>O</keycap>
- <keycap>F</keycap>
- </keycombo>,
- or
- <keycombo action="simul">
- <keycap>Windows</keycap>
- <keycap>Alt</keycap>
- <keycap>O</keycap>
- <keycap>F</keycap>
- </keycombo>
- on non-&apple; keyboards. At the <prompt>0 ></prompt>
- prompt, enter</para>
-
- <screen><userinput>boot cd:,\ppc\loader cd:0</userinput></screen>
- </sect2>
-
- <sect2>
- <title>Booting on &sparc64;</title>
-
- <para>Most &sparc64; systems are set up to boot automatically
- from disk. To install &os;
- from a <acronym>CD</acronym> requires a break into the
- <acronym>PROM</acronym>.</para>
-
- <para>To do this, reboot the system and wait until the boot
- message appears. The message depends on the model, but should look
- something like this:</para>
+ <para>These architectures provide a <acronym>BIOS</acronym>
+ menu for selecting the boot device. Depending upon the
+ installation media being used, select the
+ <acronym>CD</acronym>/<acronym>DVD</acronym> or
+ <acronym>USB</acronym> device as the first boot device. Most
+ systems also provide a key for selecting the boot device
+ during startup without having to enter the
+ <acronym>BIOS</acronym>. Typically, the key is either
+ <keycap>F10</keycap>, <keycap>F11</keycap>,
+ <keycap>F12</keycap>, or <keycap>Escape</keycap>.</para>
- <screen>Sun Blade 100 (UltraSPARC-IIe), Keyboard Present
+ <para>If the computer loads the existing operating system
+ instead of the &os; installer, then either:</para>
+
+ <orderedlist>
+ <listitem>
+ <para>The installation media was not inserted early enough
+ in the boot process. Leave the media inserted and try
+ restarting the computer.</para>
+ </listitem>
+
+ <listitem>
+ <para>The <acronym>BIOS</acronym> changes were incorrect or
+ not saved. Double-check that the right boot device is
+ selected as the first boot device.</para>
+ </listitem>
+
+ <listitem>
+ <para>This system is too old to support booting from the
+ chosen media. In this case, the <application>Plop Boot
+ Manager</application> (<link
+ xlink:href="http://www.plop.at/en/bootmanager.html">http://www.plop.at/en/bootmanager.html</link>)
+ can be used to boot the system from the selected
+ media.</para>
+ </listitem>
+ </orderedlist>
+ </sect2>
+
+ <sect2>
+ <title>Booting on &powerpc;</title>
+
+ <para>On most machines, holding <keycap>C</keycap> on the
+ keyboard during boot will boot from the <acronym>CD</acronym>.
+ Otherwise, hold <keycombo action="simul">
+ <keycap>Command</keycap>
+ <keycap>Option</keycap>
+ <keycap>O</keycap>
+ <keycap>F</keycap>
+ </keycombo>, or
+ <keycombo action="simul">
+ <keycap>Windows</keycap>
+ <keycap>Alt</keycap>
+ <keycap>O</keycap>
+ <keycap>F</keycap>
+ </keycombo> on non-&apple; keyboards. At the
+ <prompt>0 ></prompt> prompt, enter</para>
+
+ <screen><userinput>boot cd:,\ppc\loader cd:0</userinput></screen>
+ </sect2>
+
+ <sect2>
+ <title>Booting on &sparc64;</title>
+
+ <para>Most &sparc64; systems are set up to boot automatically
+ from disk. To install &os; from a <acronym>CD</acronym>
+ requires a break into the <acronym>PROM</acronym>.</para>
+
+ <para>To do this, reboot the system and wait until the boot
+ message appears. The message depends on the model, but should
+ look something like this:</para>
+
+ <screen>Sun Blade 100 (UltraSPARC-IIe), Keyboard Present
Copyright 1998-2001 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.2, 128 MB memory installed, Serial #51090132.
Ethernet address 0:3:ba:b:92:d4, Host ID: 830b92d4.</screen>
- <para>If the system proceeds to boot from disk at this point,
- press <keycombo
- action="simul"><keycap>L1</keycap><keycap>A</keycap></keycombo>
- or <keycombo
- action="simul"><keycap>Stop</keycap><keycap>A</keycap></keycombo>
- on the keyboard, or send a <command>BREAK</command> over the
- serial console. When using <application>tip</application>
- or <application>cu</application>, <command>~#</command> will
- issue a BREAK. The <acronym>PROM</acronym> prompt will be
- <prompt>ok</prompt> on systems with one
- <acronym>CPU</acronym> and <prompt>ok {0} </prompt> on <acronym>SMP</acronym>
- systems, where the digit indicates the number of the active
- <acronym>CPU</acronym>.</para>
-
- <para>At this point, place the <acronym>CD</acronym> into the
- drive and type <command>boot cdrom</command> from the
- <acronym>PROM</acronym> prompt.</para>
+ <para>If the system proceeds to boot from disk at this point,
+ press <keycombo
+ action="simul"><keycap>L1</keycap><keycap>A</keycap></keycombo>
+ or <keycombo
+ action="simul"><keycap>Stop</keycap><keycap>A</keycap></keycombo>
+ on the keyboard, or send a <command>BREAK</command> over the
+ serial console. When using <application>tip</application> or
+ <application>cu</application>, <command>~#</command> will
+ issue a BREAK. The <acronym>PROM</acronym> prompt will be
+ <prompt>ok</prompt> on systems with one
+ <acronym>CPU</acronym> and <prompt>ok {0} </prompt> on
+ <acronym>SMP</acronym> systems, where the digit indicates the
+ number of the active <acronym>CPU</acronym>.</para>
+
+ <para>At this point, place the <acronym>CD</acronym> into the
+ drive and type <command>boot cdrom</command> from the
+ <acronym>PROM</acronym> prompt.</para>
</sect2>
<sect2 xml:id="bsdinstall-view-probe">
<title>&os; Boot Menu</title>
- <para>Once the system boots from the installation media,
- a menu similar to the following will be displayed:</para>
+ <para>Once the system boots from the installation media, a menu
+ similar to the following will be displayed:</para>
- <figure xml:id="bsdinstall-newboot-loader-menu">
- <title>&os; Boot Loader Menu</title>
+ <figure xml:id="bsdinstall-newboot-loader-menu">
+ <title>&os; Boot Loader Menu</title>
- <mediaobject>
- <imageobject>
- <imagedata
- fileref="bsdinstall/bsdinstall-newboot-loader-menu"/>
- </imageobject>
- </mediaobject>
- </figure>
-
- <para>By default, the menu will wait ten seconds for user
- input before booting into the &os; installer or, if &os; is
- already installed, before booting into &os;. To pause the
- boot timer in order to review the selections, press
+ <mediaobject>
+ <imageobject>
+ <imagedata
+ fileref="bsdinstall/bsdinstall-newboot-loader-menu"/>
+ </imageobject>
+ </mediaobject>
+ </figure>
+
+ <para>By default, the menu will wait ten seconds for user input
+ before booting into the &os; installer or, if &os; is already
+ installed, before booting into &os;. To pause the boot timer
+ in order to review the selections, press
<keycap>Space</keycap>. To select an option, press its
highlighted number, character, or key. The following options
are available.</para>
@@ -784,18 +782,18 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
menu shown in, and described under, <xref
linkend="bsdinstall-boot-options-menu"/>.</para>
</listitem>
- </itemizedlist>
+ </itemizedlist>
- <figure xml:id="bsdinstall-boot-options-menu">
- <title>&os; Boot Options Menu</title>
+ <figure xml:id="bsdinstall-boot-options-menu">
+ <title>&os; Boot Options Menu</title>
- <mediaobject>
- <imageobject>
- <imagedata
- fileref="bsdinstall/bsdinstall-boot-options-menu"/>
- </imageobject>
- </mediaobject>
- </figure>
+ <mediaobject>
+ <imageobject>
+ <imagedata
+ fileref="bsdinstall/bsdinstall-boot-options-menu"/>
+ </imageobject>
+ </mediaobject>
+ </figure>
<para>The boot options menu is divided into two sections. The
first section can be used to either return to the main boot
@@ -834,19 +832,19 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<listitem>
<para><literal>Verbose</literal>: Toggle this option to
<literal>On</literal> to see more detailed messages during
- the boot process. This can be useful when troubleshooting
+ the boot process. This can be useful when troubleshooting
a piece of hardware.</para>
</listitem>
- </itemizedlist>
+ </itemizedlist>
<para>After making the needed selections, press
<keycap>1</keycap> or <keycap>Backspace</keycap> to return to
- the main boot menu, then press <keycap>Enter</keycap> to
- continue booting into &os;. A series of boot messages will
- appear as &os; carries out its hardware device probes and
- loads the installation program. Once the boot is complete,
- the welcome menu shown in
- <xref linkend="bsdinstall-choose-mode"/> will be displayed.</para>
+ the main boot menu, then press <keycap>Enter</keycap> to
+ continue booting into &os;. A series of boot messages will
+ appear as &os; carries out its hardware device probes and
+ loads the installation program. Once the boot is complete,
+ the welcome menu shown in <xref
+ linkend="bsdinstall-choose-mode"/> will be displayed.</para>
<figure xml:id="bsdinstall-choose-mode">
<title>Welcome Menu</title>
@@ -859,10 +857,10 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</figure>
<para>Press <keycap>Enter</keycap> to select the default of
- <guibutton>[ Install ]</guibutton> to
- enter the installer. The rest of this chapter describes how
- to use this installer. Otherwise, use the right or left arrows
- or the colorized letter to select the desired menu item. The
+ <guibutton>[ Install ]</guibutton> to enter the
+ installer. The rest of this chapter describes how to use this
+ installer. Otherwise, use the right or left arrows or the
+ colorized letter to select the desired menu item. The
<guibutton>[ Shell ]</guibutton> can be used to
access a &os; shell in order to use command line utilities to
prepare the disks before installation. The
@@ -871,13 +869,14 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
is described in <xref linkend="using-live-cd"/>.</para>
<tip>
- <para>To review the boot messages, including the hardware device
- probe, press the upper- or lower-case <keycap>S</keycap> and
- then <keycap>Enter</keycap> to access a shell. At the shell
- prompt, type <command>more /var/run/dmesg.boot</command> and
- use the space bar to scroll through the messages. When
- finished, type <command>exit</command> to return to the
- welcome menu.</para>
+ <para>To review the boot messages, including the hardware
+ device probe, press the upper- or lower-case
+ <keycap>S</keycap> and then <keycap>Enter</keycap> to access
+ a shell. At the shell prompt, type <command>more
+ /var/run/dmesg.boot</command> and use the space bar to
+ scroll through the messages. When finished, type
+ <command>exit</command> to return to the welcome
+ menu.</para>
</tip>
</sect2>
</sect1>
@@ -889,9 +888,9 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<application>bsdinstall</application> menus and the type of
information that will be asked before the system is installed.
Use the up and down arrows to highlight a menu option, then the
- <keycap>Space</keycap> key to select or deselect a
- menu item. Then, use <keycap>Enter</keycap> to save the selection
- and move onto the next screen.</para>
+ <keycap>Space</keycap> key to select or deselect a menu item.
+ Then, use <keycap>Enter</keycap> to save the selection and move
+ onto the next screen.</para>
<sect2 xml:id="bsdinstall-keymap">
<title>Selecting the Keymap Menu</title>
@@ -979,8 +978,8 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
</mediaobject>
</figure>
- <para>Type in a hostname that is unique for the network. It should be a fully-qualified hostname,
- such as <systemitem
+ <para>Type in a hostname that is unique for the network. It
+ should be a fully-qualified hostname, such as <systemitem
class="fqdomainname">machine3.example.com</systemitem>.</para>
</sect2>
@@ -1004,15 +1003,15 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<para>Deciding which components to install will depend largely
on the intended use of the system and the amount of disk space
available. The &os; kernel and userland, collectively known
- as the <quote>base system</quote>, are always
- installed. Depending on the architecture, some of these
- components may not appear:</para>
+ as the <quote>base system</quote>, are always installed.
+ Depending on the architecture, some of these components may
+ not appear:</para>
<itemizedlist>
<listitem>
<para><literal>doc</literal> - Additional documentation,
mostly of historical interest, to install into
- <filename>/usr/share/doc</filename>. The documentation
+ <filename>/usr/share/doc</filename>. The documentation
provided by the FreeBSD Documentation Project may be
installed later using the instructions in <xref
linkend="updating-upgrading-documentation"/>.</para>
More information about the svn-doc-head
mailing list