PERFORCE change 166148 for review
Hans Petter Selasky
hselasky at FreeBSD.org
Wed Jul 15 20:31:58 UTC 2009
http://perforce.freebsd.org/chv.cgi?CH=166148
Change 166148 by hselasky at hselasky_laptop001 on 2009/07/15 20:31:45
USB CORE:
- Add minimum polling support to drive UMASS and UKBD in case of panic.
Affected files ...
.. //depot/projects/usb/src/sys/dev/usb/controller/at91dci.c#27 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/atmegadci.c#37 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/avr32dci.c#12 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/ehci.c#31 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/musb_otg.c#25 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/ohci.c#26 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/uhci.c#24 edit
.. //depot/projects/usb/src/sys/dev/usb/controller/uss820dci.c#27 edit
.. //depot/projects/usb/src/sys/dev/usb/usb_controller.h#17 edit
.. //depot/projects/usb/src/sys/dev/usb/usb_transfer.c#160 edit
Differences ...
==== //depot/projects/usb/src/sys/dev/usb/controller/at91dci.c#27 (text+ko) ====
@@ -2326,4 +2326,5 @@
.set_stall = &at91dci_set_stall,
.clear_stall = &at91dci_clear_stall,
.roothub_exec = &at91dci_roothub_exec,
+ .xfer_poll = &at91dci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/atmegadci.c#37 (text+ko) ====
@@ -2143,4 +2143,5 @@
.set_stall = &atmegadci_set_stall,
.clear_stall = &atmegadci_clear_stall,
.roothub_exec = &atmegadci_roothub_exec,
+ .xfer_poll = &atmegadci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/avr32dci.c#12 (text+ko) ====
@@ -2081,4 +2081,5 @@
.set_stall = &avr32dci_set_stall,
.clear_stall = &avr32dci_clear_stall,
.roothub_exec = &avr32dci_roothub_exec,
+ .xfer_poll = &avr32dci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/ehci.c#31 (text+ko) ====
@@ -3828,4 +3828,5 @@
.device_suspend = ehci_device_suspend,
.set_hw_power = ehci_set_hw_power,
.roothub_exec = ehci_roothub_exec,
+ .xfer_poll = ehci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/musb_otg.c#25 (text+ko) ====
@@ -2736,4 +2736,5 @@
.set_stall = &musbotg_set_stall,
.clear_stall = &musbotg_clear_stall,
.roothub_exec = &musbotg_roothub_exec,
+ .xfer_poll = &musbotg_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/ohci.c#26 (text+ko) ====
@@ -2756,4 +2756,5 @@
.device_suspend = ohci_device_suspend,
.set_hw_power = ohci_set_hw_power,
.roothub_exec = ohci_roothub_exec,
+ .xfer_poll = ohci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/uhci.c#24 (text+ko) ====
@@ -3251,4 +3251,5 @@
.device_suspend = uhci_device_suspend,
.set_hw_power = uhci_set_hw_power,
.roothub_exec = uhci_roothub_exec,
+ .xfer_poll = uhci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/controller/uss820dci.c#27 (text+ko) ====
@@ -2360,4 +2360,5 @@
.set_stall = &uss820dci_set_stall,
.clear_stall = &uss820dci_clear_stall,
.roothub_exec = &uss820dci_roothub_exec,
+ .xfer_poll = &uss820dci_do_poll,
};
==== //depot/projects/usb/src/sys/dev/usb/usb_controller.h#17 (text+ko) ====
@@ -99,6 +99,9 @@
void (*set_stall) (struct usb_device *udev, struct usb_xfer *xfer, struct usb_endpoint *ep, uint8_t *did_stall);
void (*clear_stall) (struct usb_device *udev, struct usb_endpoint *ep);
+ /* Optional transfer polling support */
+
+ void (*xfer_poll) (struct usb_bus *);
};
/*
==== //depot/projects/usb/src/sys/dev/usb/usb_transfer.c#160 (text+ko) ====
@@ -2853,15 +2853,56 @@
return (1); /* Clear Stall Finished */
}
+/*------------------------------------------------------------------------*
+ * usbd_transfer_poll
+ *
+ * The following function gets called from the USB keyboard driver and
+ * UMASS when the system has paniced.
+ *------------------------------------------------------------------------*/
void
usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max)
{
- static uint8_t once = 0;
- /* polling is currently not supported */
- if (!once) {
- once = 1;
- printf("usbd_transfer_poll: USB polling is "
- "not supported!\n");
+ struct usb_xfer *xfer;
+ struct usb_xfer_root *xroot;
+ struct usb_device *udev;
+ struct usb_proc_msg *pm;
+ uint16_t n;
+
+ for (n = 0; n != max; n++) {
+ xfer = ppxfer[n];
+ if (xfer == NULL)
+ continue;
+ xroot = xfer->xroot;
+ if (xroot == NULL)
+ continue;
+ udev = xroot->udev;
+ if (udev == NULL)
+ continue;
+ if (udev->bus->methods->xfer_poll == NULL)
+ continue;
+
+ /* poll USB hardware */
+ (udev->bus->methods->xfer_poll) (udev->bus);
+
+ USB_BUS_LOCK(xroot->bus);
+
+ /* check for clear stall */
+ if (udev->default_xfer[1] != NULL) {
+
+ /* poll clear stall start */
+ pm = &udev->cs_msg[0].hdr;
+ (pm->pm_callback) (pm);
+ /* poll clear stall done thread */
+ pm = &udev->default_xfer[1]->
+ xroot->done_m[0].hdr;
+ (pm->pm_callback) (pm);
+ }
+
+ /* poll done thread */
+ pm = &xroot->done_m[0].hdr;
+ (pm->pm_callback) (pm);
+
+ USB_BUS_UNLOCK(xroot->bus);
}
}
More information about the p4-projects
mailing list