PERFORCE change 150638 for review

Ryan French rfrench at FreeBSD.org
Mon Sep 29 02:53:15 UTC 2008


http://perforce.freebsd.org/chv.cgi?CH=150638

Change 150638 by rfrench at rfrench_mpls on 2008/09/29 02:52:48

	Made some changed to mpls-needle for debugging to check that the correctethertype was being assigned to the packet.	

Affected files ...

.. //depot/projects/soc2008/rfrench_mpls/mpls-needle/mpls-needle.c#6 edit

Differences ...

==== //depot/projects/soc2008/rfrench_mpls/mpls-needle/mpls-needle.c#6 (text+ko) ====

@@ -35,6 +35,7 @@
 #include <net/bpf.h>
 #include <net/if.h>
 #include <net/if_dl.h>
+#include <net/ethernet.h>
 #include <netinet/in.h>
 #include <netinet/in_systm.h>
 #include <netinet/ip.h>
@@ -366,32 +367,34 @@
 	/*
 	 * The following lines are used during debugging to check the values extracted from the
 	 * config file are correct. Uncomment these when debugging.
-	 * printf("\nbuilt packets values\n");
-	 * 
-	 * printf("dst_mac = %s\n", ether_ntoa(&dst_mac));
-	 * printf("src_mac = %s\n", ether_ntoa(&src_mac));
+	 */ 
+	printf("\nbuilt packets values\n");
+	  
+	 printf("dst_mac = %s\n", ether_ntoa(&dst_mac));
+	 printf("src_mac = %s\n", ether_ntoa(&src_mac));
+	 printf("ethertype = %x\n", ntohs(eth->ether_type));
+	 
+	 printf("ip_hl = %d\n", iph->ip_hl);
+	 printf("ip_v = %d\n", iph->ip_v);
+	 printf("ip_tos = %d\n", iph->ip_tos);
+	 printf("ip_len = %d\n", iph->ip_len);
+	 printf("ip_id = %d\n", iph->ip_id);
+	 printf("ip_off = %d\n", iph->ip_off);
+	 printf("ip_ttl = %d\n", iph->ip_ttl);
+	 printf("ip_p = %d\n", iph->ip_p);
+	 printf("ip_sum = %d\n", iph->ip_sum);
+	 printf("ip_src = %s\n", inet_ntoa(iph->ip_src));
+	 printf("ip_dst = %s\n", inet_ntoa(iph->ip_dst));
+	 
+	 printf("icmp_type = %d\n", icmph->icmp_type);
+	 printf("icmp_code = %d\n", icmph->icmp_code);
+	 printf("icmp_cksum = %d\n", icmph->icmp_cksum);
 	 
-	 * printf("ip_hl = %d\n", iph->ip_hl);
-	 * printf("ip_v = %d\n", iph->ip_v);
-	 * printf("ip_tos = %d\n", iph->ip_tos);
-	 * printf("ip_len = %d\n", iph->ip_len);
-	 * printf("ip_id = %d\n", iph->ip_id);
-	 * printf("ip_off = %d\n", iph->ip_off);
-	 * printf("ip_ttl = %d\n", iph->ip_ttl);
-	 * printf("ip_p = %d\n", iph->ip_p);
-	 * printf("ip_sum = %d\n", iph->ip_sum);
-	 * printf("ip_src = %s\n", inet_ntoa(iph->ip_src));
-	 * printf("ip_dst = %s\n", inet_ntoa(iph->ip_dst));
-	 * 
-	 * printf("icmp_type = %d\n", icmph->icmp_type);
-	 * printf("icmp_code = %d\n", icmph->icmp_code);
-	 * printf("icmp_cksum = %d\n", icmph->icmp_cksum);
-	 * 
-	 * printf("mpls_label = %d\n", mpls_label);
-	 * printf("mpls_qos = %d\n", mpls_qos);
-	 * printf("mpls_bos_flag = %d\n", mpls_bos_flag);
-	 * printf("mpls_ttl = %d\n", mpls_ttl);
-	 */
+	 printf("mpls_label = %d\n", mpls_label);
+	 printf("mpls_qos = %d\n", mpls_qos);
+	 printf("mpls_bos_flag = %d\n", mpls_bos_flag);
+	 printf("mpls_ttl = %d\n", mpls_ttl);
+	
 	
 	return 0;
 }


More information about the p4-projects mailing list