PERFORCE change 155453 for review
Remko Lodder
remko at FreeBSD.org
Tue Dec 30 12:18:14 UTC 2008
http://perforce.freebsd.org/chv.cgi?CH=155453
Change 155453 by remko at remko_nakur on 2008/12/30 12:18:01
Finalize the PPP and SLIP chapter. From the original
Handbook (before some new chapters were imported
recently), this means the entire handbook is now
translated.
What remains is a review of the language, which I will
try to do in the following day(s).
Affected files ...
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#10 edit
Differences ...
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#10 (text+ko) ====
@@ -3099,70 +3099,77 @@
<programlisting>device sl</programlisting>
- <para>By default, your &os; machine will not forward packets.
- If you want your FreeBSD SLIP Server to act as a router, you
- will have to edit the <filename>/etc/rc.conf</filename> file and
- change the setting of the <literal>gateway_enable</literal> variable
- to <option>YES</option>.</para>
+ <para>Standaard zal uw &os; machine geen pakketten doorsturen.
+ Als u wilt dat uw &os; SLIP server zich gedraagt als router
+ zult u het bestand <filename>/etc/rc.conf</filename> moeten
+ bewerken en de instelling van de
+ <literal>gateway_enable</literal> variabele moeten aanpassen
+ naar <option>YES</option>. Dit zorgt ervoor dat de machine
+ na een herstart zich zal blijven gedragen als router.</para>
- <para>You will then need to reboot for the new settings to take
- effect.</para>
+ <para>Om de instellingen meteen actief te maken kunt u het
+ volgende commando als <username>root</username>
+ uitvoeren:</para>
+
+ <screen>&prompt.root; sysctl net.inet.ip.forwarding=1</screen>
- <para>Please refer to <xref linkend="kernelconfig"> on
- Configuring the FreeBSD Kernel for help in
- reconfiguring your kernel.</para>
+ <para>Refereer aub naar <xref linkend="kernelconfig"> over
+ het configureren van de &os; kernel voor meer hulp over het
+ herconfigureren van uw kernel.</para>
</sect3>
<sect3>
<title>Sliplogin configuratie</title>
- <para>As mentioned earlier, there are three files in the
- <filename>/etc/sliphome</filename> directory that are part of
- the configuration for <filename>/usr/sbin/sliplogin</filename>
- (see &man.sliplogin.8; for the actual manual page for
+ <para>Zoals eerder vermeld, zijn er drie bestanden in de
+ <filename>/etc/sliphome</filename> directory die onderdeel
+ zijn van de configuratie voor
+ <filename>/usr/sbin/sliplogin</filename> (zie
+ &man.sliplogin.8; voor de actuele handleiding voor
<command>sliplogin</command>): <filename>slip.hosts</filename>,
- which defines the SLIP users and their associated IP
- addresses; <filename>slip.login</filename>, which usually just
- configures the SLIP interface; and (optionally)
- <filename>slip.logout</filename>, which undoes
- <filename>slip.login</filename>'s effects when the serial
- connection is terminated.</para>
+ welke de SLIP gebruikers definieert en de gekoppelde IP
+ adressen; <filename>slip.login</filename>, welke meestal de
+ SLIP interface configureert en (optioneel)
+ <filename>slip.logout</filename>, welke de effecten van
+ <filename>slip.login</filename> ongedaan maakt wanneer de
+ seriële verbinding verbroken wordt.</para>
<sect4>
<title><filename>slip.hosts</filename> configuratie</title>
- <para><filename>/etc/sliphome/slip.hosts</filename> contains
- lines which have at least four items separated by
- whitespace:</para>
+ <para><filename>/etc/sliphome/slip.hosts</filename> bevat
+ regels welke minstens vier onderdelen heeft die
+ gescheiden worden door een spatie:</para>
<itemizedlist>
<listitem>
- <para>SLIP user's login ID</para>
+ <para>SLIP gebruikers login ID</para>
</listitem>
<listitem>
- <para>Local address (local to the SLIP server) of the SLIP
- link</para>
+ <para>Lokale adres (lokaal voor de SLIP server) van de
+ SLIP link</para>
</listitem>
<listitem>
- <para>Remote address of the SLIP link</para>
+ <para>Remote adres van de SLIP link</para>
</listitem>
<listitem>
- <para>Network mask</para>
+ <para>Netwerk masker</para>
</listitem>
</itemizedlist>
- <para>The local and remote addresses may be host names
- (resolved to IP addresses by
- <filename>/etc/hosts</filename> or by the domain name
- service, depending on your specifications in the file
- <filename>/etc/nsswitch.conf</filename>), and the network mask
- may be a name that can be resolved by a lookup into
- <filename>/etc/networks</filename>. On a sample system,
- <filename>/etc/sliphome/slip.hosts</filename> looks like
- this:</para>
+ <para>De lokale en remote adressen mogen host namen zijn
+ (Welke naar IP adressen vertaald kunnen worden door
+ <filename>/etc/hosts</filename> of door de
+ <acronym>DNS</acronym> diensten, afhankelijk van uw
+ specificaties in het <filename>/etc/nsswitch.conf</filename>,
+ het netwerk masker mag een naam zijn dat vertaald kan worden
+ door een zoek opdracht in <filename>/etc/networks</filename>.
+ Op een voorbeeld systeem ziet het
+ <filename>/etc/sliphome/slip.hosts</filename> bestand er als
+ volgt uit:</para>
<programlisting>#
# login local-addr remote-addr mask opt1 opt2
@@ -3170,29 +3177,30 @@
#
Shelmerg dc-slip sl-helmerg 0xfffffc00 autocomp</programlisting>
- <para>At the end of the line is one or more of the
- options:</para>
+ <para>Aan het einde van deze regel staan één of
+ meerdere opties:</para>
<itemizedlist>
<listitem>
- <para><option>normal</option> — no header
- compression</para>
+ <para><option>normal</option> — geen compressie
+ van de header</para>
</listitem>
<listitem>
- <para><option>compress</option> — compress
+ <para><option>compress</option> — comprimeer
headers</para>
</listitem>
<listitem>
- <para><option>autocomp</option> — compress headers if
- the remote end allows it</para>
+ <para><option>autocomp</option> — comprimeer de
+ headers als de remote kant dit accepteert</para>
</listitem>
<listitem>
- <para><option>noicmp</option> — disable ICMP packets
- (so any <quote>ping</quote> packets will be dropped instead
- of using up your bandwidth)</para>
+ <para><option>noicmp</option> — schakelt ICMP
+ pakketten uit (dus alle <quote>ping</quote> pakketten
+ worden geweigerd in plaats van dat deze bandbreedte
+ verbruiken)</para>
</listitem>
</itemizedlist>
@@ -3200,169 +3208,180 @@
<indexterm><primary>TCP/IP networking</primary></indexterm>
- <para>Your choice of local and remote addresses for your SLIP
- links depends on whether you are going to dedicate a TCP/IP
- subnet or if you are going to use <quote>proxy ARP</quote> on
- your SLIP server (it is not <quote>true</quote> proxy ARP, but
- that is the terminology used in this section to describe it).
- If you are not sure which method to select or how to assign IP
- addresses, please refer to the TCP/IP books referenced in
- the SLIP Prerequisites (<xref linkend="slips-prereqs">)
- and/or consult your IP network manager.</para>
+ <para>Uw keuze van een lokaal en remote adres voor uw SLIP
+ verbindingen is afhankelijk van of u een dedicated TCP/IP
+ subnet gebruikt, of dat u gebruik gaat maken van
+ <quote>proxy ARP</quote> op uw SLIP server (het is geen
+ echte <quote>proxy ARP</quote>, maar het is de terminologie
+ welke in deze sectie gebruikt wordt om eht te beschrijven).
+ Als u niet zeker bent welke methode u moet kiezen, of hoe u
+ IP adressen moet toewijzen, refereert u dan naar de TCP/IP
+ boeken die vermeld worden in de SLIP vereisten
+ (<xref linkend="slips-prereqs">) en/of vraag uw IP netwerk
+ manager om hulp.</para>
- <para>If you are going to use a separate subnet for your SLIP
- clients, you will need to allocate the subnet number out of
- your assigned IP network number and assign each of your SLIP
- client's IP numbers out of that subnet. Then, you will
- probably need to configure a static route to the SLIP
- subnet via your SLIP server on your nearest IP router.</para>
+ <para>Als u gebruik gaat maken van een separaat subnet voor
+ uw SLIP cliënten, moet u een subnet alloceren uit de
+ voor u toegewezen IP ruimte, en elke SLIP cliënt een
+ IP adres geven uit dat subnet. Daarna moet u waarschijnlijk
+ een statische route configureren voor uw SLIP subnet via
+ uw SLIP server naar de dichtsbijzijnde IP router.</para>
<indexterm><primary>Ethernet</primary></indexterm>
- <para>Otherwise, if you will use the <quote>proxy ARP</quote>
- method, you will need to assign your SLIP client's IP
- addresses out of your SLIP server's Ethernet subnet, and you
- will also need to adjust your
- <filename>/etc/sliphome/slip.login</filename> and
- <filename>/etc/sliphome/slip.logout</filename> scripts to use
- &man.arp.8; to manage the proxy-ARP entries in the SLIP
- server's ARP table.</para>
+ <para>In het andere geval moet u gebruik maken van de
+ <quote>proxy ARP</quote> methode, u moet elke SLIP
+ cliënt een IP adres geven uit uw SLIP server's
+ Ethernet subnet, daarnaast moet u het
+ <filename>/etc/sliphome/slip.login</filename> en het
+ <filename>/etc/sliphome/slip.logout</filename> script
+ aanpassen om gebruik te maken van &man.arp.8; om de
+ <quote>proxy ARP</quote> regels te beheren in de SLIP
+ servers ARP tabel.</para>
</sect4>
<sect4>
<title><filename>slip.login</filename> configuratie</title>
- <para>The typical <filename>/etc/sliphome/slip.login</filename>
- file looks like this:</para>
+ <para>Een typisch <filename>/etc/sliphome/slip.login</filename>
+ bestand ziet er als volgend uit:</para>
<programlisting>#!/bin/sh -
#
# @(#)slip.login 5.1 (Berkeley) 7/1/90
#
-# generic login file for a slip line. sliplogin invokes this with
-# the parameters:
+# generiek login bestand voor een slip lijn. sliplogin voert deze uit
+# met de volgende parameters:
# 1 2 3 4 5 6 7-n
# slipunit ttyspeed loginname local-addr remote-addr mask opt-args
#
/sbin/ifconfig sl$1 inet $4 $5 netmask $6</programlisting>
- <para>This <filename>slip.login</filename> file merely runs
- <command>ifconfig</command> for the appropriate SLIP interface
- with the local and remote addresses and network mask of the
- SLIP interface.</para>
+ <para>Dit <filename>slip.login</filename> bestand start
+ alleen het <command>ifconfig</command> commando voor de
+ betreffende SLIP interace met het lokale en remote adres
+ met het netwerkmasker van de SLIP interface.</para>
- <para>If you have decided to use the <quote>proxy ARP</quote>
- method (instead of using a separate subnet for your SLIP
- clients), your <filename>/etc/sliphome/slip.login</filename>
- file will need to look something like this:</para>
+ <para>Als u besloten heeft om gebruik te maken van de
+ <quote>proxy ARP</quote> methode (in plaats van het
+ gebruiken van een apart subnet voor uw SLIP cliënten)
+ moet u het <filename>/etc/sliphome/slip.login</filename>
+ bestand aanpassen zodat deze er ongeveer als volgend
+ uitziet:</para>
<programlisting>#!/bin/sh -
#
# @(#)slip.login 5.1 (Berkeley) 7/1/90
#
-# generic login file for a slip line. sliplogin invokes this with
-# the parameters:
+# generiek login bestand voor een slip lijn. sliplogin voert deze uit
+# met de volgende parameters:
# 1 2 3 4 5 6 7-n
# slipunit ttyspeed loginname local-addr remote-addr mask opt-args
#
/sbin/ifconfig sl$1 inet $4 $5 netmask $6
-# Answer ARP requests for the SLIP client with our Ethernet addr
+# Beantwoord ARP Verzoeken voor de SLIP cliënt met ons Ethernet
+# adres
/usr/sbin/arp -s $5 00:11:22:33:44:55 pub</programlisting>
- <para>The additional line in this
- <filename>slip.login</filename>, <command>arp -s
- $5 00:11:22:33:44:55 pub</command>, creates an ARP entry
- in the SLIP server's ARP table. This ARP entry causes the
- SLIP server to respond with the SLIP server's Ethernet MAC
- address whenever another IP node on the Ethernet asks to
- speak to the SLIP client's IP address.</para>
+ <para>De extra regel in het <filename>slip.login</filename>
+ bestand,
+ <command>arp -s $5 00:11:22:33:44:55 pub</command>,
+ creeërt een ARP regel in de SLIP server's ARP tabel.
+ Deze ARP regel zorgt ervoor dat de SLIP server antwoord
+ geeft met het Ethernet MAC adres van de SLIP server wanneer
+ een andere IP node op het Ethernet vraagt om te communiceren
+ met het IP adres van de SLIP cliënt.</para>
<indexterm>
<primary>Ethernet</primary>
<secondary>MAC address</secondary>
</indexterm>
- <para>When using the example above, be sure to replace the
- Ethernet MAC address (<hostid
- role="mac">00:11:22:33:44:55</hostid>) with the MAC address of
- your system's Ethernet card, or your <quote>proxy ARP</quote>
- will definitely not work! You can discover your SLIP server's
- Ethernet MAC address by looking at the results of running
- <command>netstat -i</command>; the second line of the output
- should look something like:</para>
+ <para>Wanneer u gebruik maakt van het voorbeeld hierboven,
+ wees u er dan zeker van dat u het Ethernet MAC Adres
+ (<hostid role="mac">00:11:22:33:44:55</hostid>) veranderd
+ in het MAC adres van uw systeem's Ethernet kaart, anders
+ werkt uw <quote>proxy ARP</quote> zeker niet! U kunt het
+ Ethernet MAC adres van uw SLIP Server achterhalen door het
+ bekijken van het resultaat van <command>netstat -i</command>;
+ de tweede regel met resultaten moet er ongeveer als
+ volgend uitzien:</para>
<screen>ed0 1500 <Link>0.2.c1.28.5f.4a 191923 0 129457 0 116</screen>
- <para>This indicates that this particular system's Ethernet MAC
- address is <hostid role="mac">00:02:c1:28:5f:4a</hostid>
- — the periods in the Ethernet MAC address given by
- <command>netstat -i</command> must be changed to colons and
- leading zeros should be added to each single-digit hexadecimal
- number to convert the address into the form that &man.arp.8;
- desires; see the manual page on &man.arp.8; for complete
- information on usage.</para>
+ <para>Dit geeft aan dat het specifieke Ethernet MAC adres van
+ het systeem is <hostid role="mac">00:02:c1:28:5f:4a</hostid>
+ — de punten in het Ethernet MAC adres welke gegeven
+ wordt door <command>netstat -i</command> moet worden veranderd
+ in dubbele punten (<quote>:</quote>) en voorloop nullen
+ moeten worden toegevoegd aan elk enkel hexadecimaal getal
+ om het adres te converteren naar de vorm die &man.arp.8;
+ wenst; zie de handleiding van &man.arp.8; voor een compleet
+ overzicht van het gebruik hiervan.</para>
<note>
- <para>When you create
- <filename>/etc/sliphome/slip.login</filename> and
- <filename>/etc/sliphome/slip.logout</filename>, the
- <quote>execute</quote> bit (i.e., <command>chmod 755
+ <para>Wanneer u
+ <filename>/etc/sliphome/slip.login</filename> en
+ <filename>/etc/sliphome/slip.logout</filename>, aanmaakt
+ moet het <quote>uitvoerbare</quote> bitje gezet zijn
+ (b.v. <command>chmod 755
/etc/sliphome/slip.login /etc/sliphome/slip.logout</command>)
- must be set, or <command>sliplogin</command> will be unable
- to execute it.</para>
+ anders is <command>sliplogin</command> niet in staat om
+ deze uit te voeren.</para>
</note>
</sect4>
<sect4>
<title><filename>slip.logout</filename> configuratie</title>
- <para><filename>/etc/sliphome/slip.logout</filename> is not
- strictly needed (unless you are implementing <quote>proxy
- ARP</quote>), but if you decide to create it, this is an
- example of a basic
- <filename>slip.logout</filename> script:</para>
+ <para><filename>/etc/sliphome/slip.logout</filename> is niet
+ strict noodzakelijk (tenzij u <quote>proxy ARP</quote>
+ implementeert), maar als beslist om deze aan te maken is
+ dit een voorbeeld basis <filename>slip.logout</filename>
+ script:</para>
<programlisting>#!/bin/sh -
#
# slip.logout
#
-# logout file for a slip line. sliplogin invokes this with
-# the parameters:
+# uitlog bestand voor een slip regel. sliplogin voert deze uit met de
+# parameters:
# 1 2 3 4 5 6 7-n
# slipunit ttyspeed loginname local-addr remote-addr mask opt-args
#
/sbin/ifconfig sl$1 down</programlisting>
- <para>If you are using <quote>proxy ARP</quote>, you will want to
- have <filename>/etc/sliphome/slip.logout</filename> remove the
- ARP entry for the SLIP client:</para>
+ <para>Als u gebruik maakt van <quote>proxy ARP</quote> wilt u
+ waarschijnlijk dat het
+ <filename>/etc/sliphome/slip.logout</filename> bestand de
+ ARP regel weghaalt voor de SLIP cliënt:</para>
<programlisting>#!/bin/sh -
#
# @(#)slip.logout
#
-# logout file for a slip line. sliplogin invokes this with
-# the parameters:
+# uitlog bestand voor een slip regel. sliplogin voert deze uit met de
+# parameters:
# 1 2 3 4 5 6 7-n
# slipunit ttyspeed loginname local-addr remote-addr mask opt-args
#
/sbin/ifconfig sl$1 down
-# Quit answering ARP requests for the SLIP client
+# Stop met het beantwoorden van ARP verzoeken voor de SLIP cliënt
/usr/sbin/arp -d $5</programlisting>
- <para>The <command>arp -d $5</command> removes the ARP entry
- that the <quote>proxy ARP</quote>
- <filename>slip.login</filename> added when the SLIP client
- logged in.</para>
+ <para>Het <command>arp -d $5</command> verwijderd de ARP
+ regel, die <quote>proxy ARP</quote> heeft toegevoegd toen
+ de SLIP cliënt inlogde.</para>
- <para>It bears repeating: make sure
- <filename>/etc/sliphome/slip.logout</filename> has the execute
- bit set after you create it (i.e., <command>chmod 755
- /etc/sliphome/slip.logout</command>).</para>
+ <para>Het is belangrijk om dit te herhalen: zorg ervoor
+ <filename>/etc/sliphome/slip.logout</filename> het
+ uitvoerbare bitje heeft gezet nadat deze gecreeërd
+ is (b.v.
+ <command>chmod 755 /etc/sliphome/slip.logout</command>).</para>
</sect4>
</sect3>
@@ -3374,11 +3393,12 @@
<secondary>routing</secondary>
</indexterm>
- <para>If you are not using the <quote>proxy ARP</quote> method for
- routing packets between your SLIP clients and the rest of your
- network (and perhaps the Internet), you will probably
- have to add static routes to your closest default router(s) to
- route your SLIP clients subnet via your SLIP server.</para>
+ <para>Als u geen gebruik maakt van de <quote>proxy ARP</quote>
+ voor het routeren van pakketten tussen uw SLIP cliënts
+ en de rest van uw netwerk (en wellicht het internet), moeten
+ er misschien een aantal statische routeringen naar de eerste
+ bereikbare standaard router ingesteld worden om uw SLIP
+ cliënts te routeren via uw SLIP server.</para>
<sect4>
<title>Statische routeringen</title>
More information about the p4-projects
mailing list