PERFORCE change 105867 for review

[Warner Losh]

http://perforce.freebsd.org/chv.cgi?CH=105867

Change 105867 by imp at imp_lighthouse on 2006/09/09 00:22:10

	Printf removal, gets us about 100 bytes

Affected files ...

.. //depot/projects/arm/src/sys/boot/arm/at91/boot2/boot2.c#14 edit
.. //depot/projects/arm/src/sys/boot/arm/at91/libat91/mci_device.c#10 edit

Differences ...

==== //depot/projects/arm/src/sys/boot/arm/at91/boot2/boot2.c#14 (text+ko) ====

@@ -227,14 +227,9 @@
     int autoboot;
     ino_t ino;
 
-    if (kname[0])
-	printf("bss not zero\n");
-
 #ifdef TSC_FPGA
 	SPI_InitFlash();
-	printf("Loading FPGA...");
 	fpga_load();
-	printf("done\n");
 #endif
     EEInit();
     MacFromEE();

==== //depot/projects/arm/src/sys/boot/arm/at91/libat91/mci_device.c#10 (text+ko) ====

@@ -452,8 +452,6 @@
 			f->Relative_Card_Address = 0;
 			continue;
 		}
-		printf("Response is %x %x %x %x\n", tab_response[0],
-		  tab_response[1], tab_response[2], tab_response[3]);
 		f->READ_BL_LEN = ((tab_response[1] >> CSD_1_RD_B_LEN_S) & CSD_1_RD_B_LEN_M);
 		f->WRITE_BL_LEN = ((tab_response[3] >> CSD_3_WBLEN_S) & CSD_3_WBLEN_M );
 		f->Sector_Size = 1 + ((tab_response[2] >> CSD_2_v22_SECT_SIZE_S) & CSD_2_v22_SECT_SIZE_M );
@@ -580,8 +578,6 @@
 	if (AT91F_MCI_GetCSD(f->Relative_Card_Address,tab_response)
 	    != AT91C_CMD_SEND_OK)
 		return AT91C_INIT_ERROR;
-	printf("Response is %x %x %x %x\n", tab_response[0],
-	  tab_response[1], tab_response[2], tab_response[3]);
 	f->READ_BL_LEN = (tab_response[1] >> CSD_1_RD_B_LEN_S) &
 	    CSD_1_RD_B_LEN_M;
 	f->WRITE_BL_LEN = (tab_response[3] >> CSD_3_WBLEN_S) &
@@ -614,7 +610,6 @@
 		return AT91C_INIT_ERROR;
 	if (AT91F_MCI_SetBlocklength(1 << f->READ_BL_LEN) != AT91C_CMD_SEND_OK)
 		return AT91C_INIT_ERROR;
-	printf("Found SD card %u bytes in size %u %u\n", f->Memory_Capacity,
-	  blocknr, mult);
+	printf("Found SD card %u bytes\n", f->Memory_Capacity);
 	return AT91C_INIT_OK;
 }