PERFORCE change 102824 for review
Sam Leffler
sam at FreeBSD.org
Mon Jul 31 03:52:52 UTC 2006
http://perforce.freebsd.org/chv.cgi?CH=102824
Change 102824 by sam at sam_ebb on 2006/07/31 03:52:10
bandaids to make it compile
Affected files ...
.. //depot/projects/wifi/sys/dev/iwi/if_iwi.c#14 edit
.. //depot/projects/wifi/sys/dev/iwi/if_iwivar.h#9 edit
Differences ...
==== //depot/projects/wifi/sys/dev/iwi/if_iwi.c#14 (text+ko) ====
@@ -975,10 +975,6 @@
/* XXX state change race with taskqueue */
switch (nstate) {
- case IEEE80211_S_INIT:
- sc->flags &= ~IWI_FLAG_SCANNING;
- break;
-
case IEEE80211_S_SCAN:
if (ic->ic_state == IEEE80211_S_RUN) {
/*
@@ -1321,7 +1317,7 @@
ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *));
/* send the frame to the 802.11 layer */
- type = ieee80211_input(ic, m, ni, frame->rssi_dbm, 0);
+ type = ieee80211_input(ic, m, ni, frame->rssi_dbm, 0, 0);
/* node is no longer needed */
ieee80211_free_node(ni);
@@ -2660,13 +2656,13 @@
#ifdef IWI_DEBUG
if (iwi_debug > 0) {
printf("Setting desired ESSID to ");
- ieee80211_print_essid(ic->ic_des_essid,
- ic->ic_des_esslen);
+ ieee80211_print_essid(ic->ic_des_ssid[0].ssid,
+ ic->ic_des_ssid[0].len);
printf("\n");
}
#endif
- error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ic->ic_des_essid,
- ic->ic_des_esslen);
+ error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ic->ic_des_ssid[0].ssid,
+ ic->ic_des_ssid[0].len);
if (error != 0)
return error;
}
@@ -2713,9 +2709,9 @@
scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(sc->dwelltime);
scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(sc->dwelltime);
- scan.full_scan_index = htole32(ic->ic_scan.nt_scangen);
+ scan.full_scan_index = htole32(++sc->sc_scangen);
- scan_type = (ic->ic_des_esslen != 0) ? IWI_SCAN_TYPE_BDIRECTED :
+ scan_type = (ic->ic_des_nssid != 0) ? IWI_SCAN_TYPE_BDIRECTED :
IWI_SCAN_TYPE_BROADCAST;
ix = 0;
@@ -2804,7 +2800,9 @@
* in the list.
*/
if (sc->flags & IWI_FLAG_SCANNING) {
+#if 0
ieee80211_begin_scan(ic, 1);
+#endif
if (iwi_scan(sc) != 0) {
/* XXX should not happen */
sc->flags &= ~IWI_FLAG_SCANNING;
@@ -2818,13 +2816,14 @@
iwi_scandone(void *arg, int npending)
{
struct iwi_softc *sc = arg;
- struct ieee80211com *ic = &sc->sc_ic;
IWI_LOCK_DECL;
IWI_LOCK(sc);
if (sc->flags & IWI_FLAG_ASSOCIATED)
iwi_disassociate(sc, 0);
+#if 0
ieee80211_end_scan(ic);
+#endif
IWI_UNLOCK(sc);
}
@@ -2846,7 +2845,7 @@
ic = &sc->sc_ic;
KASSERT(ic->ic_opmode == IEEE80211_M_MONITOR,
("opmode %u", ic->ic_opmode));
- chan = ic->ic_ibss_chan;
+ chan = ic->ic_bsschan;
memset(&scan, 0, sizeof scan);
/*
@@ -2856,7 +2855,7 @@
* channel hopping in monitor mode.
*/
scan.dwell_time[IWI_SCAN_TYPE_PASSIVE] = htole16(2000);
- scan.full_scan_index = htole32(ic->ic_scan.nt_scangen);
+ scan.full_scan_index = htole32(++sc->sc_scangen);
if (IEEE80211_IS_CHAN_5GHZ(chan))
scan.channels[0] = 1 | IWI_CHAN_5GHZ;
else
==== //depot/projects/wifi/sys/dev/iwi/if_iwivar.h#9 (text+ko) ====
@@ -165,6 +165,7 @@
int bluetooth;
struct iwi_associate assoc;
struct iwi_wme_params wme[3];
+ u_int sc_scangen;
struct task sc_radiontask; /* radio on processing */
struct task sc_radiofftask; /* radio off processing */
More information about the p4-projects
mailing list