PERFORCE change 92384 for review
Marcel Moolenaar
marcel at FreeBSD.org
Sat Feb 25 09:46:09 PST 2006
http://perforce.freebsd.org/chv.cgi?CH=92384
Change 92384 by marcel at marcel_nfs on 2006/02/25 17:45:24
IFC @92383
Affected files ...
.. //depot/projects/uart/dev/ata/ata-all.c#17 integrate
.. //depot/projects/uart/dev/ata/ata-queue.c#14 integrate
.. //depot/projects/uart/dev/ath/if_ath.c#23 integrate
.. //depot/projects/uart/dev/ath/if_athvar.h#17 integrate
.. //depot/projects/uart/dev/mpt/mpilib/mpi.h#5 integrate
.. //depot/projects/uart/dev/mpt/mpilib/mpi_cnfg.h#5 integrate
.. //depot/projects/uart/dev/mpt/mpilib/mpi_ioc.h#5 integrate
.. //depot/projects/uart/dev/mpt/mpilib/mpi_sas.h#2 integrate
.. //depot/projects/uart/dev/mpt/mpilib/mpi_type.h#7 integrate
.. //depot/projects/uart/dev/mpt/mpt.c#8 integrate
.. //depot/projects/uart/dev/mpt/mpt.h#6 integrate
.. //depot/projects/uart/dev/mpt/mpt_cam.c#5 integrate
.. //depot/projects/uart/dev/mpt/mpt_cam.h#2 integrate
.. //depot/projects/uart/dev/mpt/mpt_debug.c#8 integrate
.. //depot/projects/uart/dev/mpt/mpt_pci.c#13 integrate
.. //depot/projects/uart/dev/mpt/mpt_reg.h#2 integrate
.. //depot/projects/uart/dev/sound/pci/atiixp.c#4 integrate
.. //depot/projects/uart/i386/cpufreq/est.c#4 integrate
.. //depot/projects/uart/kern/subr_prf.c#8 integrate
.. //depot/projects/uart/modules/if_ef/Makefile#4 integrate
.. //depot/projects/uart/net/if_vlan.c#13 integrate
.. //depot/projects/uart/net80211/ieee80211_output.c#16 integrate
Differences ...
==== //depot/projects/uart/dev/ata/ata-all.c#17 (text+ko) ====
@@ -25,7 +25,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/dev/ata/ata-all.c,v 1.264 2006/02/09 20:54:42 sos Exp $");
+__FBSDID("$FreeBSD: src/sys/dev/ata/ata-all.c,v 1.265 2006/02/25 17:27:32 sos Exp $");
#include "opt_ata.h"
#include <sys/param.h>
@@ -160,6 +160,11 @@
if (!ch->r_irq)
return ENXIO;
+ /* grap the channel lock so no new requests gets launched */
+ mtx_lock(&ch->state_mtx);
+ ch->state |= ATA_STALL_QUEUE;
+ mtx_unlock(&ch->state_mtx);
+
/* detach & delete all children */
if (!device_get_children(dev, &children, &nchildren)) {
for (i = 0; i < nchildren; i++)
@@ -196,9 +201,14 @@
while (ATA_LOCKING(dev, ATA_LF_LOCK) != ch->unit)
tsleep(&dev, PRIBIO, "atarini", 1);
+ /* catch eventual request in ch->running */
+ mtx_lock(&ch->state_mtx);
+ if ((request = ch->running))
+ callout_stop(&request->callout);
+ ch->running = NULL;
+
/* unconditionally grap the channel lock */
- mtx_lock(&ch->state_mtx);
- ch->state = ATA_STALL_QUEUE;
+ ch->state |= ATA_STALL_QUEUE;
mtx_unlock(&ch->state_mtx);
/* reset the controller HW, the channel and device(s) */
@@ -208,48 +218,32 @@
if (!device_get_children(dev, &children, &nchildren)) {
mtx_lock(&Giant); /* newbus suckage it needs Giant */
for (i = 0; i < nchildren; i++) {
- if (children[i] && device_is_attached(children[i]))
- if (ATA_REINIT(children[i])) {
- /*
- * if we have a running request and its device matches
- * this child we need to inform the request that the
- * device is gone and remove it from ch->running
- */
- mtx_lock(&ch->state_mtx);
- if (ch->running && ch->running->dev == children[i]) {
- callout_stop(&ch->running->callout);
- request = ch->running;
- ch->running = NULL;
- }
- else
- request = NULL;
- mtx_unlock(&ch->state_mtx);
+ /* did any children go missing ? */
+ if (children[i] && device_is_attached(children[i]) &&
+ ATA_REINIT(children[i])) {
+ /*
+ * if we had a running request and its device matches
+ * this child we need to inform the request that the
+ * device is gone.
+ */
+ if (request && request->dev == children[i]) {
+ request->result = ENXIO;
+ device_printf(request->dev, "FAILURE - device detached\n");
- if (request) {
- request->result = ENXIO;
- device_printf(request->dev,
- "FAILURE - device detached\n");
-
- /* if not timeout finish request here */
- if (!(request->flags & ATA_R_TIMEOUT))
+ /* if not timeout finish request here */
+ if (!(request->flags & ATA_R_TIMEOUT))
ata_finish(request);
- }
- device_delete_child(dev, children[i]);
+ request = NULL;
}
+ device_delete_child(dev, children[i]);
+ }
}
free(children, M_TEMP);
mtx_unlock(&Giant); /* newbus suckage dealt with, release Giant */
}
- /* catch request in ch->running if we havn't already */
- mtx_lock(&ch->state_mtx);
- if ((request = ch->running))
- callout_stop(&request->callout);
- ch->running = NULL;
- mtx_unlock(&ch->state_mtx);
-
- /* if we got one put it on the queue again */
- if (request) {
+ /* if we still have a good request put it on the queue again */
+ if (request && !(request->flags & ATA_R_TIMEOUT)) {
device_printf(request->dev,
"WARNING - %s requeued due to channel reset",
ata_cmd2str(request));
@@ -335,7 +329,7 @@
ATA_DEBUG_RQ(request, "interrupt");
/* safetycheck for the right state */
- if (ch->state != ATA_ACTIVE && ch->state != ATA_STALL_QUEUE) {
+ if (ch->state == ATA_IDLE) {
device_printf(request->dev, "interrupt on idle channel ignored\n");
break;
}
==== //depot/projects/uart/dev/ata/ata-queue.c#14 (text+ko) ====
@@ -25,7 +25,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/dev/ata/ata-queue.c,v 1.56 2006/02/23 20:15:22 sos Exp $");
+__FBSDID("$FreeBSD: src/sys/dev/ata/ata-queue.c,v 1.57 2006/02/25 17:27:33 sos Exp $");
#include "opt_ata.h"
#include <sys/param.h>
@@ -61,7 +61,7 @@
if (!request->callback && !(request->flags & ATA_R_REQUEUE))
sema_init(&request->done, 0, "ATA request done");
- /* in ATA_STALL_QUEUE state we call HW directly (used only during reinit) */
+ /* in ATA_STALL_QUEUE state we call HW directly */
if ((ch->state & ATA_STALL_QUEUE) && (request->flags & ATA_R_CONTROL)) {
mtx_lock(&ch->state_mtx);
ch->running = request;
@@ -505,7 +505,6 @@
if ((request = ch->running) && (!dev || request->dev == dev)) {
callout_stop(&request->callout);
ch->running = NULL;
- ch->state = ATA_IDLE;
request->result = ENXIO;
TAILQ_INSERT_TAIL(&fail_requests, request, chain);
}
@@ -527,9 +526,6 @@
TAILQ_REMOVE(&fail_requests, request, chain);
ata_finish(request);
}
-
- /* we might have work for the other device on this channel */
- ata_start(ch->dev);
}
static u_int64_t
==== //depot/projects/uart/dev/ath/if_ath.c#23 (text+ko) ====
@@ -35,7 +35,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/dev/ath/if_ath.c,v 1.135 2006/02/15 18:36:52 sam Exp $");
+__FBSDID("$FreeBSD: src/sys/dev/ath/if_ath.c,v 1.136 2006/02/24 23:10:08 sam Exp $");
/*
* Driver for the Atheros Wireless LAN controller.
@@ -1155,12 +1155,16 @@
*/
ATH_TXBUF_LOCK(sc);
bf = STAILQ_FIRST(&sc->sc_txbuf);
- if (bf != NULL)
- STAILQ_REMOVE_HEAD(&sc->sc_txbuf, bf_list);
+ if (bf != NULL) {
+ if (bf->bf_flags & ATH_FLAG_BUSY)
+ bf = NULL;
+ else
+ STAILQ_REMOVE_HEAD(&sc->sc_txbuf, bf_list);
+ }
ATH_TXBUF_UNLOCK(sc);
if (bf == NULL) {
- DPRINTF(sc, ATH_DEBUG_XMIT, "%s: out of xmit buffers\n",
- __func__);
+ DPRINTF(sc, ATH_DEBUG_XMIT,
+ "%s: no available xmit buffers\n", __func__);
sc->sc_stats.ast_tx_qstop++;
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
@@ -1181,14 +1185,14 @@
ieee80211_state_name[ic->ic_state]);
sc->sc_stats.ast_tx_discard++;
ATH_TXBUF_LOCK(sc);
- STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list);
+ STAILQ_INSERT_HEAD(&sc->sc_txbuf, bf, bf_list);
ATH_TXBUF_UNLOCK(sc);
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m); /* XXX: LOCK */
if (m == NULL) {
ATH_TXBUF_LOCK(sc);
- STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list);
+ STAILQ_INSERT_HEAD(&sc->sc_txbuf, bf, bf_list);
ATH_TXBUF_UNLOCK(sc);
break;
}
@@ -1275,7 +1279,7 @@
ifp->if_oerrors++;
reclaim:
ATH_TXBUF_LOCK(sc);
- STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list);
+ STAILQ_INSERT_HEAD(&sc->sc_txbuf, bf, bf_list);
ATH_TXBUF_UNLOCK(sc);
if (ni != NULL)
ieee80211_free_node(ni);
@@ -2411,7 +2415,7 @@
__func__, dd->dd_name, ds, (u_long) dd->dd_desc_len,
(caddr_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len);
- /* allocate rx buffers */
+ /* allocate buffers */
bsize = sizeof(struct ath_buf) * nbuf;
bf = malloc(bsize, M_ATHDEV, M_NOWAIT | M_ZERO);
if (bf == NULL) {
@@ -3687,7 +3691,7 @@
, ctsrate /* rts/cts rate */
, ctsduration /* rts/cts duration */
);
- bf->bf_flags = flags;
+ bf->bf_txflags = flags;
/*
* Setup the multi-rate retry state only when we're
* going to use it. This assumes ath_hal_setuptxdesc
@@ -3758,7 +3762,7 @@
{
struct ath_hal *ah = sc->sc_ah;
struct ieee80211com *ic = &sc->sc_ic;
- struct ath_buf *bf;
+ struct ath_buf *bf, *last;
struct ath_desc *ds, *ds0;
struct ieee80211_node *ni;
struct ath_node *an;
@@ -3790,7 +3794,14 @@
break;
}
ATH_TXQ_REMOVE_HEAD(txq, bf_list);
- if (txq->axq_depth == 0)
+ if (txq->axq_depth > 0) {
+ /*
+ * More frames follow. Mark the buffer busy
+ * so it's not re-used while the hardware may
+ * still re-read the link field.
+ */
+ bf->bf_flags |= ATH_FLAG_BUSY;
+ } else
txq->axq_link = NULL;
ATH_TXQ_UNLOCK(txq);
@@ -3827,7 +3838,7 @@
* Hand the descriptor to the rate control algorithm.
*/
if ((ds->ds_txstat.ts_status & HAL_TXERR_FILT) == 0 &&
- (bf->bf_flags & HAL_TXDESC_NOACK) == 0) {
+ (bf->bf_txflags & HAL_TXDESC_NOACK) == 0) {
/*
* If frame was ack'd update the last rx time
* used to workaround phantom bmiss interrupts.
@@ -3853,6 +3864,9 @@
bf->bf_node = NULL;
ATH_TXBUF_LOCK(sc);
+ last = STAILQ_LAST(&sc->sc_txbuf, ath_buf, bf_list);
+ if (last != NULL)
+ last->bf_flags &= ~ATH_FLAG_BUSY;
STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list);
ATH_TXBUF_UNLOCK(sc);
}
@@ -3968,17 +3982,18 @@
/*
* NB: this assumes output has been stopped and
- * we do not need to block ath_tx_tasklet
+ * we do not need to block ath_tx_proc
*/
for (ix = 0;; ix++) {
ATH_TXQ_LOCK(txq);
bf = STAILQ_FIRST(&txq->axq_q);
if (bf == NULL) {
- txq->axq_link = NULL;
ATH_TXQ_UNLOCK(txq);
break;
}
ATH_TXQ_REMOVE_HEAD(txq, bf_list);
+ if (txq->axq_depth == 0)
+ txq->axq_link = NULL;
ATH_TXQ_UNLOCK(txq);
#ifdef AR_DEBUG
if (sc->sc_debug & ATH_DEBUG_RESET)
@@ -3996,10 +4011,16 @@
*/
ieee80211_free_node(ni);
}
+ bf->bf_flags &= ~ATH_FLAG_BUSY;
ATH_TXBUF_LOCK(sc);
STAILQ_INSERT_TAIL(&sc->sc_txbuf, bf, bf_list);
ATH_TXBUF_UNLOCK(sc);
}
+ ATH_TXBUF_LOCK(sc);
+ bf = STAILQ_FIRST(&sc->sc_txbuf);
+ if (bf != NULL)
+ bf->bf_flags &= ~ATH_FLAG_BUSY;
+ ATH_TXBUF_UNLOCK(sc);
}
static void
@@ -4877,10 +4898,10 @@
printf("Q%u[%3u]", qnum, ix);
for (i = 0, ds = bf->bf_desc; i < bf->bf_nseg; i++, ds++) {
- printf(" (DS.V:%p DS.P:%p) L:%08x D:%08x F:04%x%s\n"
+ printf(" (DS.V:%p DS.P:%p) L:%08x D:%08x F:%x TF:%04x%s\n"
" %08x %08x %08x %08x %08x %08x\n",
ds, (struct ath_desc *)bf->bf_daddr + i,
- ds->ds_link, ds->ds_data, bf->bf_flags,
+ ds->ds_link, ds->ds_data, bf->bf_flags, bf->bf_txflags,
!done ? "" : (ds->ds_txstat.ts_status == 0) ? " *" : " !",
ds->ds_ctl0, ds->ds_ctl1,
ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3]);
==== //depot/projects/uart/dev/ath/if_athvar.h#17 (text+ko) ====
@@ -33,7 +33,7 @@
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
- * $FreeBSD: src/sys/dev/ath/if_athvar.h,v 1.45 2006/02/15 18:23:03 sam Exp $
+ * $FreeBSD: src/sys/dev/ath/if_athvar.h,v 1.46 2006/02/24 23:10:08 sam Exp $
*/
/*
@@ -100,7 +100,8 @@
struct ath_buf {
STAILQ_ENTRY(ath_buf) bf_list;
int bf_nseg;
- int bf_flags; /* tx descriptor flags */
+ u_int16_t bf_txflags; /* tx descriptor flags */
+ u_int16_t bf_flags; /* see below */
struct ath_desc *bf_desc; /* virtual addr of desc */
bus_addr_t bf_daddr; /* physical addr of desc */
bus_dmamap_t bf_dmamap; /* DMA map for mbuf chain */
@@ -112,6 +113,8 @@
};
typedef STAILQ_HEAD(, ath_buf) ath_bufhead;
+#define ATH_FLAG_BUSY 0x0001 /* tx descriptor owned by h/w */
+
/*
* DMA state for tx/rx descriptors.
*/
@@ -137,7 +140,7 @@
*/
struct ath_txq {
u_int axq_qnum; /* hardware q number */
- u_int axq_depth; /* queue depth (stat only) */
+ int axq_depth; /* queue depth (stat only) */
u_int axq_intrcnt; /* interrupt count */
u_int32_t *axq_link; /* link ptr in last TX desc */
STAILQ_HEAD(, ath_buf) axq_q; /* transmit queue */
==== //depot/projects/uart/dev/mpt/mpilib/mpi.h#5 (text+ko) ====
@@ -1,4 +1,4 @@
-/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi.h,v 1.7 2006/01/21 00:29:51 mjacob Exp $ */
+/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi.h,v 1.8 2006/02/25 07:45:54 mjacob Exp $ */
/*-
* Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
* All rights reserved.
@@ -33,7 +33,7 @@
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.09
+ * mpi.h Version: 01.05.10
*
* Version History
* ---------------
@@ -102,6 +102,7 @@
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* --------------------------------------------------------------------------
*/
@@ -132,7 +133,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x0B)
+#define MPI_HEADER_VERSION_UNIT (0x0C)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
@@ -739,6 +740,8 @@
#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
+#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
/****************************************************************************/
/* Additional FCP target values (obsolete) */
==== //depot/projects/uart/dev/mpt/mpilib/mpi_cnfg.h#5 (text+ko) ====
@@ -1,4 +1,4 @@
-/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_cnfg.h,v 1.7 2006/01/21 00:29:51 mjacob Exp $ */
+/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_cnfg.h,v 1.8 2006/02/25 07:45:54 mjacob Exp $ */
/*-
* Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
* All rights reserved.
@@ -33,7 +33,7 @@
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.10
+ * mpi_cnfg.h Version: 01.05.11
*
* Version History
* ---------------
@@ -285,6 +285,14 @@
* Added EnclosureHandle field to SAS Expander page 0.
* Removed redundant NumTableEntriesProg field from SAS
* Expander Page 1.
+ * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
+ * SAS1078.
+ * Added more defines for Manufacturing Page 4 Flags field.
+ * Added more defines for IOCSettings and added
+ * ExpanderSpinup field to Bios Page 1.
+ * Added postpone SATA Init bit to SAS IO Unit Page 1
+ * ControlFlags.
+ * Changed LogEntry format for Log Page 0.
* --------------------------------------------------------------------------
*/
@@ -530,7 +538,7 @@
#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642)
#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640)
-#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646)
/* SCSI */
#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
@@ -546,7 +554,7 @@
#define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A)
#define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054)
#define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058)
-#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0060)
+#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062)
typedef struct _CONFIG_PAGE_MANUFACTURING_0
@@ -650,9 +658,14 @@
} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
-#define MPI_MANUFACTURING4_PAGEVERSION (0x02)
+#define MPI_MANUFACTURING4_PAGEVERSION (0x03)
/* defines for the Flags field */
+#define MPI_MANPAGE4_IME_DISABLE (0x20)
+#define MPI_MANPAGE4_IM_DISABLE (0x10)
+#define MPI_MANPAGE4_IS_DISABLE (0x08)
+#define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04)
+#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02)
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
@@ -1002,7 +1015,8 @@
U32 Reserved1; /* 0Ch */
U32 DeviceSettings; /* 10h */
U16 NumberOfDevices; /* 14h */
- U16 Reserved2; /* 16h */
+ U8 ExpanderSpinup; /* 16h */
+ U8 Reserved2; /* 17h */
U16 IOTimeoutBlockDevicesNonRM; /* 18h */
U16 IOTimeoutSequential; /* 1Ah */
U16 IOTimeoutOther; /* 1Ch */
@@ -1010,7 +1024,7 @@
} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
-#define MPI_BIOSPAGE1_PAGEVERSION (0x02)
+#define MPI_BIOSPAGE1_PAGEVERSION (0x03)
/* values for the BiosOptions field */
#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
@@ -1019,8 +1033,15 @@
#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
+
#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000)
#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20)
+
+#define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000)
+#define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000)
+
#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
@@ -1050,6 +1071,11 @@
#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
+/* defines for the ExpanderSpinup field */
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0)
+#define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4)
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F)
+
typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
{
U32 Reserved1; /* 00h */
@@ -1267,13 +1293,13 @@
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8)
#define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \
- ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \
)
#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000)
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16)
#define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \
- ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \
)
#define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000)
@@ -2404,7 +2430,7 @@
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
-#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
@@ -2419,6 +2445,7 @@
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
+#define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
@@ -2803,16 +2830,15 @@
#define MPI_LOG_0_NUM_LOG_ENTRIES (1)
#endif
-#define MPI_LOG_0_LOG_DATA_LENGTH (20)
+#define MPI_LOG_0_LOG_DATA_LENGTH (0x1C)
typedef struct _MPI_LOG_0_ENTRY
{
- U64 WWID; /* 00h */
- U32 TimeStamp; /* 08h */
- U32 Reserved1; /* 0Ch */
- U16 LogSequence; /* 10h */
- U16 LogEntryQualifier; /* 12h */
- U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */
+ U32 TimeStamp; /* 00h */
+ U32 Reserved1; /* 04h */
+ U16 LogSequence; /* 08h */
+ U16 LogEntryQualifier; /* 0Ah */
+ U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
} MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
@@ -2831,7 +2857,7 @@
} CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
LogPage0_t, MPI_POINTER pLogPage0_t;
-#define MPI_LOG_0_PAGEVERSION (0x00)
+#define MPI_LOG_0_PAGEVERSION (0x01)
#endif
==== //depot/projects/uart/dev/mpt/mpilib/mpi_ioc.h#5 (text+ko) ====
@@ -1,4 +1,4 @@
-/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_ioc.h,v 1.7 2006/01/21 00:29:51 mjacob Exp $ */
+/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_ioc.h,v 1.8 2006/02/25 07:45:54 mjacob Exp $ */
/*-
* Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
* All rights reserved.
@@ -34,7 +34,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.09
+ * mpi_ioc.h Version: 01.05.10
*
* Version History
* ---------------
@@ -111,6 +111,10 @@
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
+ * 08-30-05 01.05.10 Added 4 new events and their event data structures.
+ * Added new ReasonCode value for SAS Device Status Change
+ * event.
+ * Added new family code for FC949E.
* --------------------------------------------------------------------------
*/
@@ -492,6 +496,10 @@
#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011)
#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012)
#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013)
+#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014)
+#define MPI_EVENT_IR2 (0x00000015)
+#define MPI_EVENT_SAS_DISCOVERY (0x00000016)
+#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
/* AckRequired field values */
@@ -508,6 +516,29 @@
} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
+/* LogEntryAdded Event data */
+
+/* this structure matches MPI_LOG_0_ENTRY in mpi_cnfg.h */
+#define MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH (0x1C)
+typedef struct _EVENT_DATA_LOG_ENTRY
+{
+ U32 TimeStamp; /* 00h */
+ U32 Reserved1; /* 04h */
+ U16 LogSequence; /* 08h */
+ U16 LogEntryQualifier; /* 0Ah */
+ U8 LogData[MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH]; /* 0Ch */
+} EVENT_DATA_LOG_ENTRY, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY,
+ MpiEventDataLogEntry_t, MPI_POINTER pMpiEventDataLogEntry_t;
+
+typedef struct _EVENT_DATA_LOG_ENTRY_ADDED
+{
+ U16 LogSequence; /* 00h */
+ U16 Reserved1; /* 02h */
+ U32 Reserved2; /* 04h */
+ EVENT_DATA_LOG_ENTRY LogEntry; /* 08h */
+} EVENT_DATA_LOG_ENTRY_ADDED, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY_ADDED,
+ MpiEventDataLogEntryAdded_t, MPI_POINTER pMpiEventDataLogEntryAdded_t;
+
/* SCSI Event data for Port, Bus and Device forms */
typedef struct _EVENT_DATA_SCSI
@@ -566,6 +597,7 @@
#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06)
#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
/* SCSI Event data for Queue Full event */
@@ -607,6 +639,79 @@
#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A)
#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B)
+
+/* MPI Integrated RAID Resync Update Event data */
+
+typedef struct _MPI_EVENT_DATA_IR_RESYNC_UPDATE
+{
+ U8 VolumeID; /* 00h */
+ U8 VolumeBus; /* 01h */
+ U8 ResyncComplete; /* 02h */
+ U8 Reserved1; /* 03h */
+ U32 Reserved2; /* 04h */
+} MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+ MPI_POINTER PTR_MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+ MpiEventDataIrResyncUpdate_t, MPI_POINTER pMpiEventDataIrResyncUpdate_t;
+
+/* MPI IR2 Event data */
+
+/* MPI_LD_STATE or MPI_PD_STATE */
+typedef struct _IR2_STATE_CHANGED
+{
+ U16 PreviousState; /* 00h */
+ U16 NewState; /* 02h */
+} IR2_STATE_CHANGED, MPI_POINTER PTR_IR2_STATE_CHANGED;
+
+typedef struct _IR2_PD_INFO
+{
+ U16 DeviceHandle; /* 00h */
+ U8 TruncEnclosureHandle; /* 02h */
+ U8 TruncatedSlot; /* 03h */
+} IR2_PD_INFO, MPI_POINTER PTR_IR2_PD_INFO;
+
+typedef union _MPI_IR2_RC_EVENT_DATA
+{
+ IR2_STATE_CHANGED StateChanged;
+ U32 Lba;
+ IR2_PD_INFO PdInfo;
+} MPI_IR2_RC_EVENT_DATA, MPI_POINTER PTR_MPI_IR2_RC_EVENT_DATA;
+
+typedef struct _MPI_EVENT_DATA_IR2
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ReasonCode; /* 02h */
+ U8 PhysDiskNum; /* 03h */
+ MPI_IR2_RC_EVENT_DATA IR2EventData; /* 04h */
+} MPI_EVENT_DATA_IR2, MPI_POINTER PTR_MPI_EVENT_DATA_IR2,
+ MpiEventDataIR2_t, MPI_POINTER pMpiEventDataIR2_t;
+
+/* MPI IR2 Event data ReasonCode values */
+#define MPI_EVENT_IR2_RC_LD_STATE_CHANGED (0x01)
+#define MPI_EVENT_IR2_RC_PD_STATE_CHANGED (0x02)
+#define MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL (0x03)
+#define MPI_EVENT_IR2_RC_PD_INSERTED (0x04)
+#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)
+#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)
+#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07)
+
+/* defines for logical disk states */
+#define MPI_LD_STATE_OPTIMAL (0x00)
+#define MPI_LD_STATE_DEGRADED (0x01)
+#define MPI_LD_STATE_FAILED (0x02)
+#define MPI_LD_STATE_MISSING (0x03)
+#define MPI_LD_STATE_OFFLINE (0x04)
+
+/* defines for physical disk states */
+#define MPI_PD_STATE_ONLINE (0x00)
+#define MPI_PD_STATE_MISSING (0x01)
+#define MPI_PD_STATE_NOT_COMPATIBLE (0x02)
+#define MPI_PD_STATE_FAILED (0x03)
+#define MPI_PD_STATE_INITIALIZING (0x04)
+#define MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST (0x05)
+#define MPI_PD_STATE_FAILED_AT_HOST_REQUEST (0x06)
+#define MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON (0xFF)
+
/* MPI Link Status Change Event data */
typedef struct _EVENT_DATA_LINK_STATUS
@@ -688,6 +793,20 @@
#define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08)
#define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09)
+/* SAS Discovery Event data */
+
+typedef struct _EVENT_DATA_SAS_DISCOVERY
+{
+ U32 DiscoveryStatus; /* 00h */
+ U32 Reserved1; /* 04h */
+} EVENT_DATA_SAS_DISCOVERY, MPI_POINTER PTR_EVENT_DATA_SAS_DISCOVERY,
+ EventDataSasDiscovery_t, MPI_POINTER pEventDataSasDiscovery_t;
+
+#define MPI_EVENT_SAS_DSCVRY_COMPLETE (0x00000000)
+#define MPI_EVENT_SAS_DSCVRY_IN_PROGRESS (0x00000001)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16)
+
/* SAS Discovery Errror Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
@@ -897,6 +1016,7 @@
#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) /* 919XL and 929XL */
#define MPI_FW_HEADER_PID_FAMILY_939X_FC (0x0004) /* 939X and 949X */
#define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005)
+#define MPI_FW_HEADER_PID_FAMILY_949E_FC (0x0006)
/* SAS */
#define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001)
#define MPI_FW_HEADER_PID_FAMILY_1068_SAS (0x0002)
==== //depot/projects/uart/dev/mpt/mpilib/mpi_sas.h#2 (text+ko) ====
@@ -1,4 +1,4 @@
-/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_sas.h,v 1.1 2006/01/21 00:29:51 mjacob Exp $ */
+/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_sas.h,v 1.2 2006/02/25 07:45:54 mjacob Exp $ */
/*-
* Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
* All rights reserved.
@@ -34,7 +34,7 @@
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.01
+ * mpi_sas.h Version: 01.05.02
*
* Version History
* ---------------
@@ -42,6 +42,9 @@
* Date Version Description
* -------- -------- ------------------------------------------------------
* 08-19-04 01.05.01 Original release.
+ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
+ * Added PrimFlags and Primitive field to SAS IO Unit
+ * Control request, and added a new operation code.
* --------------------------------------------------------------------------
*/
@@ -79,6 +82,7 @@
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
+#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
@@ -240,10 +244,10 @@
U8 TargetID; /* 0Ch */
U8 Bus; /* 0Dh */
U8 PhyNum; /* 0Eh */
- U8 Reserved4; /* 0Fh */
- U32 Reserved5; /* 10h */
+ U8 PrimFlags; /* 0Fh */
+ U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved6; /* 1Ch */
+ U32 Reserved4; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
@@ -254,7 +258,13 @@
#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI_SAS_OP_MAP_CURRENT (0x09)
+#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
+/* values for the PrimFlags field */
+#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
+#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
+#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
+
/* SAS IO Unit Control Reply */
typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
@@ -274,3 +284,5 @@
SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
#endif
+
+
==== //depot/projects/uart/dev/mpt/mpilib/mpi_type.h#7 (text+ko) ====
@@ -1,4 +1,4 @@
-/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_type.h,v 1.8 2006/01/21 00:29:51 mjacob Exp $ */
+/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_type.h,v 1.9 2006/02/25 07:45:54 mjacob Exp $ */
/*
* Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
* All rights reserved.
@@ -34,7 +34,7 @@
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
- * mpi_type.h Version: 01.05.01
+ * mpi_type.h Version: 01.05.02
*
* Version History
* ---------------
@@ -48,6 +48,7 @@
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
+ * 08-30-05 01.05.02 Added PowerPC option to #ifdef's.
* --------------------------------------------------------------------------
*/
@@ -71,12 +72,24 @@
*
*****************************************************************************/
-typedef int8_t S8;
-typedef uint8_t U8;
-typedef int16_t S16;
-typedef uint16_t U16;
-typedef int32_t S32;
-typedef uint32_t U32;
+typedef signed char S8;
+typedef unsigned char U8;
+typedef signed short S16;
+typedef unsigned short U16;
+
+
+#if defined(unix) || defined(__arm) || defined(ALPHA) || defined(__PPC__) || defined(__ppc)
+
+ typedef signed int S32;
+ typedef unsigned int U32;
+
+#else
+
+ typedef signed long S32;
+ typedef unsigned long U32;
+
+#endif
+
typedef struct _S64
{
==== //depot/projects/uart/dev/mpt/mpt.c#8 (text+ko) ====
@@ -1,5 +1,5 @@
/*-
- * Generic routines for LSI '909 FC adapters.
+ * Generic routines for LSI Fusion adapters.
* FreeBSD Version.
*
* Copyright (c) 2000, 2001 by Greg Ansley
@@ -24,10 +24,41 @@
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
+ */
+/*-
+ * Copyright (c) 2002, 2006 by Matthew Jacob
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon including
+ * a substantially similar Disclaimer requirement for further binary
+ * redistribution.
+ * 3. Neither the names of the above listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
+ * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
+ * Support from Chris Ellsworth in order to make SAS adapters work
+ * is gratefully acknowledged.
*/
-/*
+/*-
* Copyright (c) 2004, Avid Technology, Inc. and its contributors.
* Copyright (c) 2005, WHEEL Sp. z o.o.
* Copyright (c) 2004, 2005 Justin T. Gibbs
@@ -61,7 +92,7 @@
*/
#include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/dev/mpt/mpt.c,v 1.15 2006/02/11 01:35:29 mjacob Exp $");
+__FBSDID("$FreeBSD: src/sys/dev/mpt/mpt.c,v 1.16 2006/02/25 07:45:54 mjacob Exp $");
#include <dev/mpt/mpt.h>
#include <dev/mpt/mpt_cam.h> /* XXX For static handler registration */
==== //depot/projects/uart/dev/mpt/mpt.h#6 (text+ko) ====
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list